Selected file failed to open as a PDF error .. on ARES 7.0

I am trying to enable some reader features using Adobe LiveCycle Reader Ex 7.0 but when I upload the pdf file i got this message
"Error 442: Selected file failed to open as a PDF 'com.adobe.document.pdf.PDFOperationFailure: IDL:com/adobe/document/pdf/PDFOperationFailure:1.0'."
when I open this fiel by Adobe Reader 8.0 I got this message
"This document contained certain rights to enable some features in Adobe Reader. This document has been changed since it was created and these rights are no longer valid. Please contact the author for the original version of this document."
is there any right should be assigned during the creation of PDF to avoid this error? i am using these products
Adobe LiveCycle Reader Ex 7.0
Adobe Acrobat 7.0
Adobe Reader 8.0
thank u;

Similar Messages

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)

Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.

Ok, so let's start at step 1:
SP 1 just released and I'd recommend applying that. The SO is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
For future reference, msm matching the above SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
and msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
Step 2: a few questions:
a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
b) what is the database you are connecting to?
c) is this a web or a win app?
Step 3: As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
3) If that works, use a report with subreports
4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
5) Run the new report in your new app, enter the PWD when prompted
6) If this works, add your database logon code
7) If that works, add your original report (again, preferably with no subreports)
8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
9) If it works, see if you can determine the difference between your old app and the new app.
Ludek

I am unable to open pdf links using firefox 4 beta 11. Error message is "....ashx file cannot be opened, because an unknown error occurred. Try saving to disk first and then opening file"

I can open some pdf file in FF beta 11 using Adobe reader, however some links to pdf files cannot be opened. When clicked, the error message above appears. There is no option to open the file, so I have had to switch to Safari to read these pdf file.

Please install the following add-on to see if it helps.
https://addons.mozilla.org/en-US/firefox/addon/pdfjs/

Silent FULL install of Reader 10.1.2 (MUI) Failing to open Web Browser PDFs post

Hello,
having major issues with a silent install to 3300 users.
I Have a vb script that runs in SCCM to install reader 10.1.0 (MUI) and the increnetal patches for 10.1.1 and 10.1.2 both MUI. I have created a transform to not use a desktop icon, turn on protect mode and supress the eula. The install does not load in the script unless adobe processes have ended. The log file reports a successfull install and PDFs ope with a language prompt for the first one from the local machine fne. 3 problems.
** The script searches for old versions and completly install the mui version over all with the following command line:
"AcroRead.msi TRANSFORMS=AcroRead.mst PATCH="AdbeRdrUpd1011_MUI.msp; AdbeRdrUpd1012_MUI.msp" ALLUSERS=1 LANG_ID=1033 PRODUCTLANGUAGE=1033 LEAVE_PDFOWNERSHIP=YES REMOVE_PREVIOUS=YES EULA_ACCEPT=YES SUPPRESS_APP_LAUNCH=YES /qn /norestart /LOG c:\progra~1\Adobe\AdobeReader10.1.2.log"
Setup.ini file reads:
[Startup]
RequireOS=Windows 2000
RequireMSI=3.0
RequireIE=6.0.2600.0
CmdLine=/sl"1033" /rs /sPB
[Product]
msi=AcroRead.msi
CmdLine=TRANSFORMS="AcroRead.mst"
Languages=1033
1033=English (United States)
[Windows 2000]
PlatformID=2
MajorVersion=5
ServicePackMajor=4
[MSI Updater]
Path=http://ardownload.adobe.com/pub/adobe/reader/win/8.x/8.0/misc/WindowsI nstaller-KB893803-v2-x86.exe
Problems on about 120 computers so far:
1. If the system had 10.1.1 and not the 10.1.1 MUI and 10.1.2 MUI stay in Add Remove Programs
2. Systems that get the full uninstall and reinstall even if adobe is closed and browser is closed and user can not read files from the web or email after the complete install to 10.1.2 mui. Adobe works locally.
3. Some systems appear to upgrade fine.
HELP PLEASE!!!!

There are a couple of things that caught my notice in the command being used which may be causing the issue:
1. You should not be clubbing the Rdr MUI 10.1.1 patch and the Rdr MUI 10.1.2 patch, since all the Reader patches are cumulative till the last quarterly release. Hence, no need to apply the Reader 10.1.1 MUI patch in this case. The correct command would be:
"AcroRead.msi TRANSFORMS=AcroRead.mst PATCH="AdbeRdrUpd1012_MUI.msp" ALLUSERS=1 LANG_ID=1033 PRODUCTLANGUAGE=1033 LEAVE_PDFOWNERSHIP=YES REMOVE_PREVIOUS=YES EULA_ACCEPT=YES SUPPRESS_APP_LAUNCH=YES /qn /norestart /LOG c:\progra~1\Adobe\AdobeReader10.1.2.log"
2. The REMOVE_PREVIOUS key will work only for the same product. In your case, since a localized version of Reader 10.1.1 is already present, it will not be able to remove the same while installing Reader MUI 10.1.2. Hence, the two entries in the Control Panel.
I guess you can achieve the same by pushing the command for uninstalling any non MUI installations of Reader (msiexec /x <path to Reader 10.1.0 non MUI MSI>). This can be followed by pushing the above mentioned script for deploying the Reader 10.1.2 MUI application.
3. Also, since you are using the No Reboot switch which must be suppressing any and all reboot prompts. But are you ensuring that the system is restarted post any update? It might be the case that some files may be locked and would be needing a restart for them to be properly updated. This may be causing the browser issue as you had stated.
Do let me know if this helps.

Failed to open the target schema error

Hi,
I am using JDeveloper 10.1.3.1.
I created a soap service in ESB to consume one of Jive forum web service and a routing service to supply information to the soap service to call a method in the web service. When I tried to create the mapping, I got the following error:
Failed to open the target schema: Invalid reference: 'http://webservices.forum.jivesoftware.com:User'
And the design view of the mapping file (.xsl) file shows nothing on Target area.
Anybody has any idea where the problem lies? Below is the WSDL:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://jivesoftware.com/webservices" xmlns:tns="http://jivesoftware.com/webservices" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope" xmlns:ns1="http://webservices.forum.jivesoftware.com" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc11="http://schemas.xmlsoap.org/soap/encoding/" xmlns:soapenc12="http://www.w3.org/2003/05/soap-encoding" xmlns:ns2="http://base.jivesoftware.com" xmlns:soap11="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://jivesoftware.com/webservices"><xsd:element name="getUsers"><xsd:complexType/></xsd:element><xsd:element name="getUsersResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:ArrayOfUser"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="setUserProperty"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="name" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="value" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="userID" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="setUserPropertyResponse"><xsd:complexType/></xsd:element><xsd:element name="UserNotFoundException" type="ns2:UserNotFoundException"/><xsd:element name="deleteUserProperty"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="name" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="userID" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="deleteUserPropertyResponse"><xsd:complexType/></xsd:element><xsd:element name="getUser"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="id" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="deleteUser"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="userID" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="deleteUserResponse"><xsd:complexType/></xsd:element><xsd:element name="getUsersByEmailAddress"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="emailAddress" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUsersByEmailAddressResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:ArrayOfUser"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserByEmailAddress"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="emailAddress" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserByEmailAddressResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserProperties"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="userID" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserPropertiesResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:ArrayOfProperty"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserByUsername"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="username" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserByUsernameResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUsersBounded"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="startIndex" type="xsd:int"/><xsd:element maxOccurs="1" minOccurs="1" name="numResults" type="xsd:int"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUsersBoundedResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:ArrayOfUser"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserCount"><xsd:complexType/></xsd:element><xsd:element name="getUserCountResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" type="xsd:int"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="createUser"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="username" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="password" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="email" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="createUserResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="UserAlreadyExistsException" type="ns2:UserAlreadyExistsException"/><xsd:element name="updateUser"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="user" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="updateUserResponse"><xsd:complexType/></xsd:element></xsd:schema>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://webservices.forum.jivesoftware.com"><xsd:complexType name="ArrayOfUser"><xsd:sequence><xsd:element maxOccurs="unbounded" minOccurs="0" name="User" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType><xsd:complexType name="User"><xsd:sequence><xsd:element minOccurs="0" name="ID" type="xsd:long"/><xsd:element minOccurs="0" name="creationDate" type="xsd:dateTime"/><xsd:element minOccurs="0" name="email" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="emailVisible" type="xsd:boolean"/><xsd:element minOccurs="0" name="modificationDate" type="xsd:dateTime"/><xsd:element minOccurs="0" name="name" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="nameVisible" type="xsd:boolean"/><xsd:element minOccurs="0" name="password" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="passwordHash" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="username" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType><xsd:complexType name="ArrayOfProperty"><xsd:sequence><xsd:element maxOccurs="unbounded" minOccurs="0" name="Property" nillable="true" type="ns1:Property"/></xsd:sequence></xsd:complexType><xsd:complexType name="Property"><xsd:sequence><xsd:element minOccurs="0" name="name" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="value" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:schema>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://base.jivesoftware.com"><xsd:complexType name="UserNotFoundException"><xsd:sequence><xsd:element minOccurs="0" name="userID" type="xsd:long"/><xsd:element minOccurs="0" name="username" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType><xsd:complexType name="UserAlreadyExistsException"/></xsd:schema>
</wsdl:types>
<wsdl:message name="getUsersBoundedResponse">
<wsdl:part name="parameters" element="tns:getUsersBoundedResponse"/>
</wsdl:message>
<wsdl:message name="updateUserResponse">
<wsdl:part name="parameters" element="tns:updateUserResponse"/>
</wsdl:message>
<wsdl:message name="UserAlreadyExistsException">
<wsdl:part name="UserAlreadyExistsException" element="tns:UserAlreadyExistsException"/>
</wsdl:message>
<wsdl:message name="getUsersBoundedRequest">
<wsdl:part name="parameters" element="tns:getUsersBounded"/>
</wsdl:message>
<wsdl:message name="updateUserRequest">
<wsdl:part name="parameters" element="tns:updateUser"/>
</wsdl:message>
<wsdl:message name="deleteUserPropertyResponse">
<wsdl:part name="parameters" element="tns:deleteUserPropertyResponse"/>
</wsdl:message>
<wsdl:message name="createUserRequest">
<wsdl:part name="parameters" element="tns:createUser"/>
</wsdl:message>
<wsdl:message name="getUserRequest">
<wsdl:part name="parameters" element="tns:getUser"/>
</wsdl:message>
<wsdl:message name="setUserPropertyRequest">
<wsdl:part name="parameters" element="tns:setUserProperty"/>
</wsdl:message>
<wsdl:message name="deleteUserResponse">
<wsdl:part name="parameters" element="tns:deleteUserResponse"/>
</wsdl:message>
<wsdl:message name="setUserPropertyResponse">
<wsdl:part name="parameters" element="tns:setUserPropertyResponse"/>
</wsdl:message>
<wsdl:message name="getUserCountResponse">
<wsdl:part name="parameters" element="tns:getUserCountResponse"/>
</wsdl:message>
<wsdl:message name="getUserByEmailAddressResponse">
<wsdl:part name="parameters" element="tns:getUserByEmailAddressResponse"/>
</wsdl:message>
<wsdl:message name="getUserResponse">
<wsdl:part name="parameters" element="tns:getUserResponse"/>
</wsdl:message>
<wsdl:message name="deleteUserPropertyRequest">
<wsdl:part name="parameters" element="tns:deleteUserProperty"/>
</wsdl:message>
<wsdl:message name="getUserByUsernameResponse">
<wsdl:part name="parameters" element="tns:getUserByUsernameResponse"/>
</wsdl:message>
<wsdl:message name="getUserByUsernameRequest">
<wsdl:part name="parameters" element="tns:getUserByUsername"/>
</wsdl:message>
<wsdl:message name="getUserByEmailAddressRequest">
<wsdl:part name="parameters" element="tns:getUserByEmailAddress"/>
</wsdl:message>
<wsdl:message name="createUserResponse">
<wsdl:part name="parameters" element="tns:createUserResponse"/>
</wsdl:message>
<wsdl:message name="getUsersRequest">
<wsdl:part name="parameters" element="tns:getUsers"/>
</wsdl:message>
<wsdl:message name="getUsersResponse">
<wsdl:part name="parameters" element="tns:getUsersResponse"/>
</wsdl:message>
<wsdl:message name="getUsersByEmailAddressRequest">
<wsdl:part name="parameters" element="tns:getUsersByEmailAddress"/>
</wsdl:message>
<wsdl:message name="deleteUserRequest">
<wsdl:part name="parameters" element="tns:deleteUser"/>
</wsdl:message>
<wsdl:message name="getUserCountRequest">
<wsdl:part name="parameters" element="tns:getUserCount"/>
</wsdl:message>
<wsdl:message name="getUserPropertiesResponse">
<wsdl:part name="parameters" element="tns:getUserPropertiesResponse"/>
</wsdl:message>
<wsdl:message name="getUsersByEmailAddressResponse">
<wsdl:part name="parameters" element="tns:getUsersByEmailAddressResponse"/>
</wsdl:message>
<wsdl:message name="getUserPropertiesRequest">
<wsdl:part name="parameters" element="tns:getUserProperties"/>
</wsdl:message>
<wsdl:message name="UserNotFoundException">
<wsdl:part name="UserNotFoundException" element="tns:UserNotFoundException"/>
</wsdl:message>
<wsdl:portType name="ProfileServicePortType">
<wsdl:operation name="getUsers">
<wsdl:input name="getUsersRequest" message="tns:getUsersRequest"/>
<wsdl:output name="getUsersResponse" message="tns:getUsersResponse"/>
</wsdl:operation>
<wsdl:operation name="setUserProperty">
<wsdl:input name="setUserPropertyRequest" message="tns:setUserPropertyRequest"/>
<wsdl:output name="setUserPropertyResponse" message="tns:setUserPropertyResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="deleteUserProperty">
<wsdl:input name="deleteUserPropertyRequest" message="tns:deleteUserPropertyRequest"/>
<wsdl:output name="deleteUserPropertyResponse" message="tns:deleteUserPropertyResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUser">
<wsdl:input name="getUserRequest" message="tns:getUserRequest"/>
<wsdl:output name="getUserResponse" message="tns:getUserResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="deleteUser">
<wsdl:input name="deleteUserRequest" message="tns:deleteUserRequest"/>
<wsdl:output name="deleteUserResponse" message="tns:deleteUserResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUsersByEmailAddress">
<wsdl:input name="getUsersByEmailAddressRequest" message="tns:getUsersByEmailAddressRequest"/>
<wsdl:output name="getUsersByEmailAddressResponse" message="tns:getUsersByEmailAddressResponse"/>
</wsdl:operation>
<wsdl:operation name="getUserByEmailAddress">
<wsdl:input name="getUserByEmailAddressRequest" message="tns:getUserByEmailAddressRequest"/>
<wsdl:output name="getUserByEmailAddressResponse" message="tns:getUserByEmailAddressResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUserProperties">
<wsdl:input name="getUserPropertiesRequest" message="tns:getUserPropertiesRequest"/>
<wsdl:output name="getUserPropertiesResponse" message="tns:getUserPropertiesResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUserByUsername">
<wsdl:input name="getUserByUsernameRequest" message="tns:getUserByUsernameRequest"/>
<wsdl:output name="getUserByUsernameResponse" message="tns:getUserByUsernameResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUsersBounded">
<wsdl:input name="getUsersBoundedRequest" message="tns:getUsersBoundedRequest"/>
<wsdl:output name="getUsersBoundedResponse" message="tns:getUsersBoundedResponse"/>
</wsdl:operation>
<wsdl:operation name="getUserCount">
<wsdl:input name="getUserCountRequest" message="tns:getUserCountRequest"/>
<wsdl:output name="getUserCountResponse" message="tns:getUserCountResponse"/>
</wsdl:operation>
<wsdl:operation name="createUser">
<wsdl:input name="createUserRequest" message="tns:createUserRequest"/>
<wsdl:output name="createUserResponse" message="tns:createUserResponse"/>
<wsdl:fault name="UserAlreadyExistsException" message="tns:UserAlreadyExistsException"/>
</wsdl:operation>
<wsdl:operation name="updateUser">
<wsdl:input name="updateUserRequest" message="tns:updateUserRequest"/>
<wsdl:output name="updateUserResponse" message="tns:updateUserResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="ProfileServiceHttpBinding" type="tns:ProfileServicePortType">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="getUsers">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUsersRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUsersResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="setUserProperty">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="setUserPropertyRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="setUserPropertyResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="deleteUserProperty">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="deleteUserPropertyRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="deleteUserPropertyResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUser">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="deleteUser">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="deleteUserRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="deleteUserResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUsersByEmailAddress">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUsersByEmailAddressRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUsersByEmailAddressResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="getUserByEmailAddress">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserByEmailAddressRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserByEmailAddressResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUserProperties">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserPropertiesRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserPropertiesResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUserByUsername">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserByUsernameRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserByUsernameResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUsersBounded">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUsersBoundedRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUsersBoundedResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="getUserCount">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserCountRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserCountResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="createUser">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="createUserRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="createUserResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserAlreadyExistsException">
<wsdlsoap:fault name="UserAlreadyExistsException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="updateUser">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="updateUserRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="updateUserResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="ProfileService">
<wsdl:port name="ProfileServiceHttpPort" binding="tns:ProfileServiceHttpBinding">
<wsdlsoap:address location="http://aarc1.us.oracle.com:7777/owc_discussions_nosso/rpc/soap/ProfileService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Thank you.
Message was edited by:
user579972

Let me add more information. The web service is provided online from the application and I didn't make a local copy or modify it.
I tested the web service using SOAP UI and worked like a charm.
I made another test just now by only creating Soap service to use the WSDL and allow the external invocation. Then I call the ESB wsdl (soap service WSDL) from SOAP UI and got the following error. It seems to me, ESB incorrectly format the soap request to Jive or the ESB has problem handling the request from SoapUI.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:ESBMessageProcessingFailed</faultcode>
<detail>
<EventName>JiveESB.ProfileService.createUser</EventName>
<Cause>An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: application/xop+xml; type="text/xml"; charset=UTF-8
     at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1717)
     at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1463)
     at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1185)
     at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:507)
     at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:430)
     at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:447)
     at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:184)
     at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:112)
     at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:106)
     at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:85)
     at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1416)
     at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(EventOracleSoapProvider.java:314)
     at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(EventOracleSoapProvider.java:187)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:436)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
     at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:539)
     at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:430)
     at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:447)
     at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:184)
     at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:112)
     at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:106)
     at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:85)
     at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1416)
     at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(EventOracleSoapProvider.java:314)
     at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(EventOracleSoapProvider.java:187)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:436)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: application/xop+xml; type="text/xml"; charset=UTF-8
     at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1717)
     at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1463)
     at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1185)
     at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:507)
     ... 28 more
".</Cause>
</detail>
</env:Fault>
</env:Body>
</env:Envelope>
Thanks.

Illustrator applescript open multi-page PDF error

Hi all, I am trying to create a script to find and replace objects in a multi-page pdf in Illustrator. Everything else works except for open and save, which I still have to do manually. I tried to open the file using the following
open myFile as PDF with options {class:PDF open options, page:4}
But Applescript returns the error "Expected class name but found application constant or consideration."

Checkout this discussion
http://forums.adobe.com/thread/499840?tstart=0
esp the last from Mario Arizmendi

Failed to open the connection. Error in the Designer when copying ...

I have two different systems I am developing an application on.
I copy the entire directory from one system to the other. Both systems have the same environment:
Visual Studio 2010
Crystal Reports for Visual Studio 2010 (the production release, or I think it is the vesion is 13.0.2.0 is the version on the assemblies)
SQL 2008 R2
Today, I started adding Crystal reports to this VS solution. I have a reportdriver class that exports all the reports to an HTTP Stream, but we can sit that aside for now. The problem I am having is strictly with the integrated designer.
I have a bunch of existing reports written for an old Sybase databse. I have ported them to SQL and the table structure matches. I simply add the report to my project, point it to the new datasource (using "Set Datasource Location" - OLE ADO SQL) and then preview the report to be sure it runs.
I am just using "localhost" as my server name for the OLE connection so I...in theory... don't have to change the data source to view it on the other system. Both systems have SQL 2008 R2 installed locally. For my login credentials, I use SQL Security and use the same database login/password on both development machines andthe production server.
Today, I copied my entire project to the other PC (as I do almost every day).. When I open any of the reports (in VS) and try to preview them I get:
Failed to open the connection.
Details: ADO Error Code: 0x80004005
Source: Microsoft OLE DB Provide for SQL Server
Description: [DBNETLIB][ConnectionOpen (Connect().]SQL Server does not exist or access denied.
SQL State: 08001
Native Error: 17 [Database Vendor Code: 17]
I can only guess that I am using two different OLE ADO drivers on the two systems or there is something embedded in the rport or somewhere in my solution that "knows" I am not really on the same system that I initially set them up on and previewd them with.
Am I on the right track? Any idea how I can fix this? Obviously, I don't want to have to setup the datasource for every report in my application (if I do that, the report works) when I copy it from the development to the production server.
I am in a real bind here and under a fast aproaching deadline. Any help is much appreciated!!!
Shayne

Don't use localhost as your server name. It's a reserved name and should not be used in code.
Try this also [Kbase |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333433363339%7D.do] SAP Note 1553469 - How to enable Database logging in Crystal Reports for Visual Studio 2010
Edited by: Don Williams on Jan 30, 2011 6:02 AM

Failed to Open FR report With Error code 500 - 'unable to process request'

I am running a load test against PBCS service. The service is load-balanced with 2 managed servers : EPMServer0 and EPMServer1
When I put the loads with 60 VUs -- all visiting FR reports, the service runs without error. But when the VU# increased to 90, it began to respond with Error code 500 - 'unable to process request'.
I tried to correlate the FRLogging logs to the errors, and found during the time those error happens, there are logs like this:
>>>>>>>>>>>>>>>>>>>>>>>>>>
[2013-09-27T05:21:29.325+00:00] [EPMServer0] [WARNING] [00365] [oracle.EPMFR.core] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: sysname50134114.PerfUser0439] [ecid: 004tpQ^VFHT7m3RLIYDCif0007a30002bD,0:2:1:1] [APP: FINANCIALREPORTING#11.1.2.0] [SRC_CLASS: com.hyperion.reporting.connection.UserConnection] [SRC_METHOD: openConnection] User authentication information is invalid. Unable to connect to datasource.[[
com.hyperion.reporting.util.HyperionReportException: Error connecting to database connection Vision:Plan1: Failed to sync with user provisioning.com.hyperion.planning.HspRuntimeException
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.openConnection(Unknown Source)
        at com.hyperion.reporting.connection.UserConnection.<init>(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getConnection(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.connection.ConnectionManager.getCube(Unknown Source)
        at com.hyperion.reporting.webviewer.WebDynamicReport.validateDatasources(Unknown Source)
    at jsp_servlet._modules._com._hyperion._reporting._web._reportviewer.__hrhtmlreport._jspService(__hrhtmlreport.java:1999)
        at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.needAuthentication(Unknown Source)
        at com.hyperion.reporting.webviewer.HRSecurePagesFilter.doFilter(Unknown Source)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at com.hyperion.reporting.webviewer.FRClusterHelper.doFilter(Unknown Source)
>>>>>>>>>>>>>>>>>>>>>>>>>
It looks like the servlet failed to open the datasource connection while handling the FR requests. But there are several data sources. My questions are:
1) Which datasource is corresponding to the issue? Is it EPMSystemRegistry?
2) What is the recommended configuration for the connection pool max capacity setting? -- current setting for EPMSystemRegistry is 30
3) Whether it could be a connection leak problem as only 90 concurrent end user is visiting and it failed to connect?
Thanks,
Ellick Lu
Type
JNDI Name
Targets
aif_datasource
Generic
jdbc/aif_datasource
EPMServer
calc_datasource
Generic
jdbc/calc_datasource
EPMServer
EPMSystemRegistry
Generic
jdbc/EPMSystemRegistry
EPMServer
odiMasterRepository
Generic
jdbc/odiMasterRepository
EPMServer
planning_datasource
Generic
jdbc/planning_datasource
EPMServer
raframework_datasource
Generic
jdbc/raframework_datasource
EPMServer

It is checking for Database connection in Workspace. Check Editing Database Connections
Can those users login to Planning? Do they have correct security setup (I guess not)
Regards
Celvin
http://www.orahyplabs.com

HELP! My .ai file now only opens as a pdf!

Last week I finished my artwork and saved as usual as an .ai file. I checked it again a few days ago, made a few amendments, and it was fine. Today I tried to open it but a box I have never seen before seems to think my document is a pdf and I get the option to open either 'image' or 'pages'. I open pages and the artwork does not look such great resolution as it did previously. How did this happen? Anyone enlighten me. Many thanks.
OMG. Working too late, I tried to open it in Photoshop not AI. Ooops, nite nite

Does it respond the same way if you use File>Open from within Illustrator? If it opens as an illustrator file, try doing a SaveAs and save it in a new place. If the new file works correctly, throw away the other.

OAM Access Manager SSO solution fails to open docs and pdfs

Hi
I have created a solusion for SSO like this.
OAM against AD, running on windows (server A). Webpass is on IIS.
The applikation I'm protecting is an Weblogic 10.0 application running on windows (server B)
I have also installed the webgate on serverB running on Apache 2.0, and all the installation is done by following the documentation for Weblogic sso
(This is to make the application runnable directly through port 80 and redirecting in Apache)
The sso works fine.
But i have a problem in IE6
When the application is trying to open documents to view them in msword or pdf for printing, the document is not opened, I get an "file not found" exeption in the browser, and the url for getting the document seems very long. (The grey popup)
When I open the application in IE8 it works fine, and the url for getting document seems short (just the docID)
(The application is currently only compatible for IE6 so running it in IE8 will cause other problems)
I cannot find any error messages in any logs.
If I run the excact same application without sso its working fine in both IE8 and IE6
Regards
Tine

Hi
This is a followup to the question in this thread
The system is now able to load pdf's and doc documents, and the reason it did not work before was due to the cache settings on the webgate. The system is now caching documents in the temporarInternetfolder created for the users and loads word and pdf files for printing without problems.
Now.. my problem is that the application is also running a kind of "generate pdf, doc, html files" application which are saving some modified files on the local users area. (my computer)
After that the application ask to load these documents into the applications database.
When I use the Apache mod_weblogic.c to proxy the requests, large files (5 MB) are not able to be loaded into the application database. I get a "the connection with the server was terminated abnormally" exeption.
Small files (94 KB) are working fine.
Does anyone have any idea of what can cause this?
I have upgraded Apache from 2.0.58 to Apache 2.0.63 and I use mod_wl128_20.so as the weblogic module.
Regards
Tine

I'm on Windows 7. Why won't Adobe download my file converted from pdf to Word .doc or .docx? Error message comes up saying file failed to download due to configuration error but I don't know how to correct this. Any help appreciated!

What can I do to get Adobe to download a pdf file it has converted into a doc or docx file? Any help appreciated!

Hi Ebbelby,
You're welcome!
Happy to help
Regards,
Rahul

Flash Files failed to open - HELP!!

Hey, can somebody please help me out, I have been getting this problem everytime i try to save my document. I am tryin to make a a flash website for a collage project.
I made the design in Photoshop and imported it into Flash. It works fine untill i save it close and try to reopen it again.
I keep getting this message.
I have tried saving it in different locations. same thing happens.
any ideas on how i can recover and also how i can stop this from happening? I tried opening on differnt computers, Im on a PC here at home but the same thing happend on the iMac in collage.

Ok thanks, Ned, that is a good suggestion and i Will change the folder names but ALL of my other Adobe stuff is in that folder and has been for years. Never cause any problems. anyway windows will prompt if you try to save an invalid charater.
I have also got other flash files in that same folder that open fine and work no problem.
It seems to only be this PSD that is causing the problems.
I my PSD I have folders within folders, do yas think this might be the problem, I have made them all Movie Clips importing them, Im graspin at straws here i know but i cant think of anything else.
I have tried saving it as a compressd (.xfl) cs5 doc and same thing happens.
a cs4 will reopen but i loose the tfl text???

Video files failing to open

I have a problem opening any of the tutorial videos on Belight software's Live Interior site e.g.
http://belightsoft.com/products/liveinterior/screencastsview.php?file=1
The videos open fine in Firefox on the same computer. Can anyone reproduce the problem and/or suggest a solution?
I am running Safari 4.0.4 under OS X 10.6.2 on a 2.1GHz Intel core Duo macbook

Hi Andy
Plug-ins are enabled. When opening the link I see the blue Quicktime logo with a 'Close' button at the bottom of the window, but no quicktime loads. The activity window shows:-
http://belightsoft.com/products/liveinterior/screencastsview.php?file=1
http://belightsoft.com/Styles.css
I have Glims and AdBlocker installed - but the problem persists when these are disabled.

Project file failing to open on different machine with same version of FCP

i have been editing a documentary on my mac book, on an upgraded version of final cut studio two. i recently got an iMac, Intel Core 2 Duo, 2.66 GHz, and planned to continue editing the same project on this. i loaded fC studio to it, but when i tried to open my existing project file, it tells me that the project file's format is too new for the version of the application. but it's the exact same version!
totally stumped.

When you upgraded to the latest OS, do you mean from say Tiger to Leopard? If so and it wasn't done cleanly as an erase and install of that new OS, I'd suggest this could very well be the reason you're having problems...
If you'd like you could send me a copy of this project file... [email protected] If I can open it, it's likely your install that's causing the problem, and the fix is to wipe your hard drive and start over, or get another drive to start up from that's cleanly installed.
Jerry

Design Studio SDK: Eclipse fail to open Design Studio with error message

Hi,
Environment:
BO 4.1 SP2
Eclipse 4.3.2
I am learning Design Studio SDK using the Developer Guide Tutorial available in help.sap.com. I am trying to deploy the sample SDK component.
While I try to open Design Studio application from Eclipse, it throws below errors. Run As -> Eclipse Application.
Please help!
Thanks in Advance!
-Jeni

Hi Jenifer
It looks to me as if the JAVA Home Variable is not set?
To get to this in Windows 7 you need to right click on Computer and select properties
Then click Advanced System Settings, Then Click Environment Variables button,
Have you got a JAVA_HOME Variable as per the attached screenshot? Please not this need to point to the Java folder on your PC

Selected file failed to open as a PDF error .. on ARES 7.0

Similar Messages

Maybe you are looking for