Selected G/L a/c doesnot exist

Hi
I have defined a House Bank Account, now i am creating an outgoing cheq payment method for that bank account.  The system gives the following error message :
"Selected G/L A/c does not exist. Payment methods for payment wizard default A/C. Message 3647-3"
please any one explain why this is happened
thanks
Venkat
Edited by: Venkat on Mar 24, 2008 1:45 PM

Hi Naresh,
Yes for the Bank the G/L a/c no. was wrongly assigned thats why it was giving the error message,  however the problem still exists even after correcting the G/L account n umber.  when I add the payment method after correction the system throws out the following message.
"This Entry is already exists in the following tables CHEN and PYM1"
Dont know why
venkat

Similar Messages

  • RFC destination DEVCLNT120 doesnot exist

    Hi Expert,
    i  am getting some error in production when i am selecting WorkEnvironment-->EquipmentCard in ESS i.e RFC destination DEVCLNT120 doesnot exist.this issue is not there in dev system.
    Regards,
    Smruti Moharana

    Hi Smruti,
    Please check the WorkEnvironment-->EquipmentCard using DEVCLNT120 in the ivew properties. check the required system object for the iview.
    Best Regards
    Arun Jaiswal

  • FRM-40815 Variable Global.Nodename doesnot exists

    Hi there,
    i am using oracle Dev suite 10g, when i create new form module in form builder, it is runing properly but when i try to open existing forms, and when i run those forms , it generate the following error:
    FRM-40815 Variable Global.Nodename doesnot exists
    plz help me with that......
    thanks in advance

    Well, the obvious answer is that the "Global.Nodename" global variable referenced by your Form doesn't exist. One of the drawbacks to using a Global Variable is that if you haven't instanciated (created) the variable, it does not produce a design time error; they only produce runtime errors if the variable doesn't exist.
    when i try to open existing forms, and when i run those forms , it generate the following error:Are you running the existing forms from the Forms Builder? If so, your applciation may be written so that it creates Global Variables during initial login or through the selection of a menu option, etc. If this is how your application works, you won't be able to run your Form from the Forms Builder unless you know what the values of these Global Variables are and you set them temporarily in your Form using the Default_Value() built-in. If you need more information on using Global Variables, I recommend you search the Form Help system.
    Craig...

  • Error: Entry USD doesnot exist in TCURC - check your entry

    After creating a new logical system "CLNT300" When I assign a logical system to my client "300" it shows error
    "Entry USD doesnot exist in TCURC - check your entry"
    Please describe in steps.
    Thanks

    Hi
    When I check TCURC in SE16 there is 0 entry.
    Yes this is new client and user created by following procedure:
    1)login as a "sap*" and client "000"
    2)Use tcode scc4 and create client "300" with "Currency=USD" and target client is "Education/Training" and select "No restriction"
    3)login as client "300" with user sap* and password pass.
    4)use tcode sccl Then select "Selected Profile=SAP_USER" and "Source Client=000"
    5)use tcode su01 and copying DDIC to Imran and select "Role=BW_ALL" and save it.
    6)Login as a "Imran" and client "300"
    7)use tcode RSA1 and creating a new logical system "CLNT300".
    8)When assign a logical system to my client "300" and try to save it show the error.
    So What do next??

  • Error in Starting the service.The Service Schedule doesnot Exist.

    when i install the Oracle 8i on Windows 2003 then
    it installed successfully and import and export data successfully wothout any Problem
    But after that when i restart the Server then
    it ask for the User name and Password BUT when i entered the User Name and Password it show's that Error
    "Error in Starting the service.
    The Service Schedule doesnot Exist."
    so please can you solve the problem ?
    My mail id is [email protected]
    Thanking you
    Vikas garg

    Hi
    i have got the answer for this question, i updated the registry with the correct file path, and then closed the registry, the services.msc file is automatically updated with the correct path
    and then started the CSService, then went to the OEM setup i clicked Retry buton, then it went through.
    Thanks to all the viewers.

  • Counting rule doesnot exist.

    Hello,
    When I try to enter time I'm getting thefollowing error after I press enter "counting rule 08/2/00/.. doesnot exist".
    In Data Entry Area I'm entering the details for Activity type, Rec. order, Attendance/Absence Type and the hours for the week i.e. Monday, Tue etc..
    Can anyone help me where I'm missing with the Configuration. This is an urgent issue please help.
    Thanks & Regards,
    Padmaja.

    Hi Raghu,
    The employee who is getting error has ESG 1, and he is bookong time for Attendance type, i m not getting where to maintain the counting rule for attendance type. as under the counting rule for attendance it is already maintain.
    Thanks in advance,
    Padmaja

  • SQL select all sessionid for which ONLY exist actionid 1 OR 2 OR 5

    Create Table:
    create table x ( sessionid number, actionid number, sessionactionid number, a3 varchar2(10));
    Inserts;
    insert into x values (1000, 1, 100, 'asdfsadf' );
    insert into x values (1000, 2, 101, 'asdfsadf' );
    insert into x values (1000, 3, 102, 'asdfsadf' );
    insert into x values (1000, 4, 103, 'asdfsadf' );
    insert into x values (1001, 1, 104, 'asdfsadf' );
    insert into x values (1001, 3, 105, 'asdfsadf' );
    insert into x values (1001, 6, 106, 'asdfsadf' );
    insert into x values (1001, 1, 107, 'asdfsadf' );
    insert into x values (1001, 1, 108, 'asdfsadf' );
    insert into x values (1002, 1, 109, 'asdfsadf' );
    insert into x values (1002, 2, 110, 'asdfsadf' );
    insert into x values (1002, 5, 111, 'asdfsadf' );
    insert into x values (1003, 1, 112, 'asdfsadf' );
    insert into x values (1003, 2, 113, 'asdfsadf' );
    insert into x values (1003, 5, 114, 'asdfsadf' );
    insert into x values (1003, 4, 115, 'asdfsadf' );
    insert into x values (1004, 2, 116, 'asdfsadf' );
    insert into x values (1004, 5, 117, 'asdfsadf' );
    Query to resolve;
    select all sessionid for which ONLY exist one actionid for each of 1 and 2 and 5
    also important that all 3 actionid must exist for that sessionid otherwise that record is not valid for us.
    with the table above the result should be;
    SESSIONID
    =======
    1002
    PS: Sorry my db is not accessible at the moment and therefore could not test the above CREATE and INSERTS statements.
    Edited by: Andre on Jan 19, 2012 5:17 PM

    Hi, Andre,
    Andre wrote:
    Create Table:
    create table x ( sessionid number, actionid number, sessionactionid number, a3 varchar2(10));
    Inserts;
    insert into x values (1000, 1, 100, 'asdfsadf' );
    insert into x values (1000, 2, 101, 'asdfsadf' );
    insert into x values (1000, 3, 102, 'asdfsadf' );
    insert into x values (1000, 4, 103, 'asdfsadf' );
    insert into x values (1001, 1, 104, 'asdfsadf' );
    insert into x values (1001, 3, 105, 'asdfsadf' );
    insert into x values (1001, 6, 106, 'asdfsadf' );
    insert into x values (1001, 1, 107, 'asdfsadf' );
    insert into x values (1001, 1, 108, 'asdfsadf' );
    insert into x values (1002, 1, 109, 'asdfsadf' );
    insert into x values (1002, 2, 110, 'asdfsadf' );
    insert into x values (1002, 5, 111, 'asdfsadf' );
    insert into x values (1003, 1, 112, 'asdfsadf' );
    insert into x values (1003, 2, 113, 'asdfsadf' );
    insert into x values (1003, 5, 114, 'asdfsadf' );
    insert into x values (1003, 4, 115, 'asdfsadf' );
    insert into x values (1004, 2, 116, 'asdfsadf' );
    insert into x values (1004, 5, 117, 'asdfsadf' );
    Query to resolve;
    select all sessionid for which ONLY exist one actionid for each of 1 and 2 and 5
    also important that all 3 actionid must exist for that sessionid otherwise that record is not valid for us.
    with the table above the result should be;
    SESSIONID
    =======
    1002Why isn't 1003 included? It has only 1 each of 1, 2, and 5, and it has all 3 of those actionids.
    This does what you requested:
    SELECT       sessionid
    FROM       x
    WHERE       actionid     IN (1, 2, 5)
    GROUP BY  sessionid
    HAVING       COUNT (actionid)          = 3
    AND       COUNT (DISTINCT actionid)     = 3
    ;This does not assume anything is uniue.
    Did you mean that the sessionids displayed must not have any actionids other than 1, 2 and 5? If so:
    SELECT       sessionid
    FROM       x
    GROUP BY  sessionid
    HAVING       COUNT (actionid)          = 3
    AND       COUNT (DISTINCT actionid)     = 3
    AND       COUNT ( CASE
                   WHEN  actionid  IN (1, 2, 5)
                   THEN  1
                END
              )               = 3
    ;Either way, GROUP BY ... HAVING is a natural way to approach the problem. You're interested in groups of rows, not single rows (that's what GROUP BY is all about), and the group as a whole must meet certain conditions (that's what HAVING is all about).
    Edited by: Frank Kulash on Jan 19, 2012 11:22 PM
    Added 2nd guess

  • Package doesnot exists????

    Hi all,
    My Jdev version is 11.1.2.3.0.
    The application was working very fine. later i created AppModuleImpl.java and added one method to AppModuleImpl.java.
    After adding one method in AppModuleImpl.java getting error after running page package doesnot exist and showing the below imports:
    import oracle.adf.model.BindingContext;
    import oracle.binding.BindingContainer;
    import oracle.binding.OperationBinding;
    import oracle.jbo.JboException;
    import oracle.jbo.server.ApplicationModuleImpl;
    import oracle.jbo.server.ViewObjectImpl;
    And in AppModuleImpl.java if i type import oracle. then its showing only * i.e. import oracle.* only exists.
    what should i do to import all the above imports???
    Any suggestions will be really useful.
    Thank you.

    Hi Frank,
    Thanks for ur quick respose.
    ADF Model Runtime library is already added to both Model and ViewController projects.
    what else i am missing here?
    Thanks.

  • Y5 doesnot exist

    hi,
    Invoices were booked with Y5 10% in SD module correctly. Now at time of payment to tax collectorate for output taxes in MIRO,system displaying message tax code Y5 doesnot exist despite i can see the tax code in MIRO. I am unable to understand the cause of error, please guide.

    Dear:
               Instead of deactivating %age in FTXP for Y5 you should tell your SD consultant to make the condition record inactive as maintained in VK13 or restrict its validity period. Ideally you should never delete FTXP Y5 %age , because in case of invoice reversal in subsequent periods system may get confused if ti does not find the tax code maintenance in FTXP.
    Regards

  • Error "Operation in order 221234 doesnot exist" while doing confirmation

    Hello Friends,
    When i am doing the collective confirmation against the corrective maintenance order or order type CORR, by transaction IW44, getting the error message as "Operation in order 221234 doesnot exist".
    Whereas when i checked in PM Order , in operation tab i am able to see the operation with control key PM01, and 1800 as work involved in the activity.
    This order is having the status as PCNF. When i checked Documents for order - Document flow than i found that till date user has done the confirmation of 1026.8 actual work.
    Hence unable to understand why system is not allowing to do the further confirmation and throwing the error message as stated above.
    Waiting for your valuable reply.
    Thanks and Regards,
    Jitendra Chauhan.

    Hello Friends,
    Found out the solution.
    In transaction iw44 (PM Order Confirmation: Collective Confirmation), With Order Number, Act. Work, also have to give the operation number. If you maintain all these paramters than system doesn't throw the error message.
    Thanks and Regards,
    Jitendra Chauhan.

  • Package javax.ejb doesnot exist

    I installed weblogic 10 on "D:\weblogic10\"
    Java is installed on "C:\java"
    I am getting the problem "package javax.ejb doesnot exist"
    I came to know that this problem is due to the class path.
    and we have to set the class path as "\\weblogic\lib\weblogicaux.jar"
    I didn't set find "lib" directory and that jar file also.
    I tried weblogic 9.1 and 7.0. But I was unable to find those in my weblogic directory.
    How can I set the class path?

    Thanx for reply.
    I'm repeating the problem:
    I could not find "lib" directory and that jar file
    also.
    In the "D:\weblogic", the following are present:
    Different direcotries:
    jdk150_06,jrockit90_150_06,logs,modules,
    tools,user_projects,utils,weblogic100tp,
    workshop100tp
    Some files:
    license.bea, registry,registry,UpdateLicense
    Now, plz guide me where I can find the lib directory? and then jar file?
    Thankx

  • Error Profit center doesnot exist in BAPI_MATERIAL_SAVEDATA

    Dear Experts,
                         I am using BAPI_MATERIAL_SAVEDATA to create material using       basic_view ,
          sales_view   
            purchase_view  
           mrp_view      
           storage_view    views but i am getting an error message 701  Profir center doesnot exist. Can you say me what parameter i am missing. I am passing the profit center in BAPI_MARC parameter of bapi and the corresponding profit center actually exists. when i craete manually no such error comes.

    keep an eye at the profit center number. you may have to add leading zeros.

  • Smartform Error : "Sytems Message 042 from WA SSF Composer Doesnot Exist "

    Dear All,
    I am having problem with smartform. Actually it was runnning Properly and I messed up something,
    and Now I am getting a Message in status bar as <b>"System Message 042 from WorkArea SSF Composer Doesnot Exist".</b>
    Where could be the problem, Please Help me in this regard.
    Thanking you.
    Regards
    Venkat.

    Venkat,
    I don't think we can't make anything out of the error message. You can debug and find out which element is giving the problem. Then you can probably can figure out what is wrong with that element.
    Debugging elements is not going to be easy, you will have to be really careful with each element.
    Regards,
    Ravi

  • Transport request from a Client that doesnot exist.

    Hi,
    I want to make changes to a program. The program is under a modifiable Transport request (not released).
    This transport request is created in client 10 which no more exists.
    Now i need to do the changes in client 100.
    I cannot change the owner, neither can i delete nor release.
    Basis also cannot do it as the client 10 doesnot exist at all.
    Any solution?
    Answers will be rewards.
    Thanks
    Skantheri.

    Hi,
    1. one option is goto se09 and goto that request.
    2. expand that request.
    3. In that remove the object(program)
    4. If that is successful, then it will allow to change the program and automatically ask for new request number.
    regards,
    amit m.

  • Entry sheet doesnot exists Msg No se012

    Hi All,
    We have some Service POs for which service entry has been done now when I am trying to cancel these service entry sheets system says "entry sheet doesnot exists Msg No se012" please guide.
    Thanks in advance
    Pavan H S

    hi
    please check the service entry sheet number in the display purchase order screen and copy the same number for cancellation.

Maybe you are looking for