Selected row number

Toad is not showing selected row number option on status bar???
plz help
i checked grid visual option it doesnt showing select rownumber option

[email protected] wrote:
Toad is not showing selected row number option on status bar???TOAD? Oh.. and there I thought the title of this forum is SQL and PL/SQL.... my mistake...
So, can I ask some Compiz questions here? (after all, this is the window manager I used for SQL*Plus)

Similar Messages

How to identify the Selected row number or Index in the growing Table

Hi,
How to find the selected Row number or Row Index of growing Table using Javascript or Formcalc in Interactive Adobe forms
Thanks & Regards
Srikanth

After using bellow script it works fine
xfa.resolveNode("Formname.Table1.Row1["this.parent.index"].fieldname").rawValue;

How to save the selected row number to NSUserDefaults

I am trying to save the indexpath.row of the selected row to NSUserDefaults temporarily until my detail view controller can load its UITextFields based on which row is tapped. First of all is this good? I chose this design because the detail view controller cannot access the master view controller so I can't find out which row its tapped. To save to NSUSerDefaults, I did the following code, and the NSLog is always returning row 0 no matter what row I tap. Plus the title is not being set: its still blank.
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
    [patientList deselectRowAtIndexPath:indexPath animated:YES];
    [[NSUserDefaults standardUserDefaults] setInteger:indexPath.row forKey:@"rowSelected"];
    NSLog(@"The selected row saved is row %d"), [[NSUserDefaults standardUserDefaults] integerForKey:@"rowSelected"];
    if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPhone) {
        PatientDetailViewController *detailViewController = [[PatientDetailViewController alloc] initWithNibName:@"PatientDetailViewController" bundle:nil];
        detailViewController.title = [patientDisplayName objectAtIndex:[[NSUserDefaults standardUserDefaults] integerForKey:@"rowSelected"]];
        // Pass the selected object to the new view controller.
        [self.navigationController pushViewController:detailViewController animated:YES];
        [detailViewController release];

I have also tried setting the title differently (I also added comments to explain each line what it does, the rest is the same), but neither methods work
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
    // Deselect the row
    [patientList deselectRowAtIndexPath:indexPath animated:YES];
    // Save to memory the row selected
    [[NSUserDefaults standardUserDefaults] setInteger:indexPath.row forKey:@"rowSelected"];
    // Show saved row to make sure it saved correctly
    NSLog(@"The selected row saved is row %d"), [[NSUserDefaults standardUserDefaults] integerForKey:@"rowSelected"];
    // Check if user is using iPhone
    if (UI_USER_INTERFACE_IDIOM() == UIUserInterfaceIdiomPhone) {
        // Load the view
        PatientDetailViewController *detailViewController = [[PatientDetailViewController alloc] initWithNibName:@"PatientDetailViewController" bundle:nil];
        // Set the title of the detail view controller based on row selected
        detailViewController.title = [patientDisplayName objectAtIndex:indexPath.row];
        // Push the detail view controller
        [self.navigationController pushViewController:detailViewController animated:YES];
        // Release the detail view controller
        [detailViewController release];

Check box als column in a standard table, how to get the selected row

Dear experts,
I habe standard tablt with check box as column. Now I want to get the current selected row structure and do some changes. How could I solve this problem? till now I just know to get the structure via lead selection.
lo_node->get_element().
lo_element = lo_node->get_static_attributes ( static_attributes = ls_row).
How could I get the element through check-box in stead of lead selection. Many thanks!

check this code
To get the selected row number
data: lr_element type ref to if_wd_context_element,
lv_index type i.
lr_element = wdevent->get_context_element( name = 'CONTEXT_ELEMENT' ).
lv_index = lr_element->get_index( ).
Thanks
Bala Duvvuri

Returns wrong row number with ENTER key in JTable...

I am having a problem to get exact row number ofJTable when ENTER key is pressed.
table.getSelectedRow() always retuns one more value when ENTER key is pressed(fired). like
if i have 5 rows in a table and when my focus is on 1st row and then i press enter key focus moves to next row and it returns 1 instead of 0 for the 1st row.
I have written a code bellow, please check it out and tell me why it happens. Please click on Add Row button for creating rows in table.
import javax.swing.*;
   import javax.swing.table.*;
   import java.awt.*;
   import java.awt.event.*;
   import java.util.Vector;
   class TableTest extends JFrame {
     MyTableModel myModel;
     JTable table;
     JButton button;
     JButton buttonQuery;
     int count = 0;
     public TableTest() {
       myModel = new MyTableModel();
       table = new JTable(myModel);
       table.setPreferredScrollableViewportSize(new Dimension(500, 200));
       JScrollPane scrollPane = new JScrollPane(table);
      table.addKeyListener(new KeyAdapter(){
          public void keyTyped(KeyEvent ke)
            if(ke.getKeyChar() == ke.VK_ENTER){
              System.out.println(table.getSelectedRow());
       getContentPane().add(scrollPane, BorderLayout.CENTER);
       getContentPane().add(button = new JButton("Add Row"),
       BorderLayout.SOUTH);
       getContentPane().add(buttonQuery = new JButton("Query"), BorderLayout.NORTH);
       button.addActionListener(new ActionListener() {
    public void actionPerformed(ActionEvent e) {
      Object [] aRow = new Object [8];
     String aRow1;
     for (int i=0; i<5; i++) {}
     myModel.addRow(aRow);
   buttonQuery.addActionListener(new ActionListener() {
     public void actionPerformed(ActionEvent e) {
       System.out.println(myModel.getRowCount());
       System.out.println(myModel.getValueAt(1, 3));
   addWindowListener(new WindowAdapter() {
     public void windowClosing(WindowEvent e) {
       System.exit(0);
   class MyTableModel extends AbstractTableModel {
   protected final String[] headers =
   { "No", "Vehicle No", "Date of Loss", "Image Type", "Image Description", "Claim Type", "Scan Date", "User Id" };
   Vector data;
   MyTableModel() {
    data = new Vector();
   public int getColumnCount() {
     return headers.length;
   public int getRowCount() {
    return data.size();
   public Object getValueAt(int row, int col) {
   if (row < data.size() && col < 8) {
     Object [] aRow = (Object []) data.elementAt(row);
   return aRow[col];
   } else {
     return null;
   public void addRow(Object [] aRow) {
     data.addElement(aRow);
    fireTableRowsInserted(data.size()-1, data.size()-1);
   public static void main(String[] args) {
   TableTest frame = new TableTest();
   frame.pack();
   frame.setVisible(true);
   }Regards..
jaya

Dear Jaya,
I have a look at your code. And modified a bit as well to really check the getSelectedRow(). Here's the modified code: I think when key event fired, the table row is changed and then is displays the get selected row. You can check this, if you are on the last row, and you press enter, it displays 0, it means first it changes the row and then displays the selected row which is obviously rowNumber+1.
Hope it helps.
import javax.swing.*;
import javax.swing.table.*;
import java.awt.*;
import java.awt.event.*;
import java.util.Vector;
class TableTest
    extends JFrame {
MyTableModel myModel;
JTable table;
JButton button;
JButton buttonQuery;
JButton buttonSelectedRow;
int count = 0;
public TableTest() {
    myModel = new MyTableModel();
    table = new JTable(myModel);
    table.setPreferredScrollableViewportSize
        (new Dimension(500, 200));
    JScrollPane scrollPane = new JScrollPane(table);
    table.addKeyListener(new KeyAdapter() {
      public void keyTyped(KeyEvent ke) {
        if (ke.getKeyChar() == ke.VK_ENTER) {
          System.out.println(table.getSelectedRow());
    getContentPane().add(scrollPane, BorderLayout.CENTER);
    getContentPane().add(button = new JButton("Add Row"), BorderLayout.SOUTH);
    getContentPane().add(buttonQuery = new JButton("Query"), BorderLayout.NORTH);
    getContentPane().add(buttonSelectedRow = new JButton("Get Selected Row Number"), BorderLayout.NORTH);
    button.addActionListener(new ActionListener() {
      public void actionPerformed(ActionEvent e) {
        Object[] aRow = new Object[8];
        String
            aRow1;
        for (int i = 0; i < 5; i++) {}
        myModel.addRow(aRow);
    buttonSelectedRow.addActionListener(new ActionListener() {
      public void actionPerformed(ActionEvent e) {
        System.out.println("Selected Row is: " + table.getSelectedRow());
    buttonQuery.addActionListener(new ActionListener() {
      public void actionPerformed(ActionEvent e) {
        System.out.println(myModel.getRowCount());
        System.out.println(myModel.getValueAt(1, 3));
    addWindowListener(new WindowAdapter() {
      public void windowClosing(WindowEvent e) {
        System.exit(0);
class MyTableModel
      extends AbstractTableModel {
    protected final String[] headers = {
        "No", "Vehicle No", "Date of Loss", "Image Type", "Image Description",
        "Claim Type", "Scan Date", "User Id"};
    Vector data;
    MyTableModel() {
      data = new Vector();
    public int getColumnCount() {
      return headers.length;
    public int getRowCount() {
      return data.size();
    public Object getValueAt(int row, int col) {
      if (row < data.size() && col < 8) {
        Object[] aRow = (Object[]) data.elementAt(row);
        return aRow[col];
      else {
        return null;
    public void addRow(Object[] aRow) {
      data.addElement(aRow);
      fireTableRowsInserted(data.size() - 1, data.size() - 1);
public static void main(String[] args) {
    TableTest frame = new TableTest();
    frame.pack();
    frame.setVisible(true);

How to get row number of selected entry from OVS search result

Hi,
Anyone having any idea on how to get row number of the selected entry/ how to differentiate rows in OVS search result in ON_OVS method?
Regards,
Jatin

Hi,
You can get the selected record to <ls_selection> structure in co phase 3.
From that structure you can get what ever field you want.,
check the below code for reference,
<< Moderator message - Cut and paste response from F4 help for ALV table field removed. Plagiarism is not allowed in SCN >>
hope this helps u.,
Thanks & Regards,
Kiran
Edited by: Rob Burbank on Jan 5, 2012 5:24 PM

Open system form and select a row number on matrix by click on button

Hi experts,
I have to open the purchase order form and select a specific row number from the matrix by clicking a button on sales order form.
is it possible ?
can anyone help me to achieve it?
Thanks in advance.
Best regards
Andrea

Andrea,
To Do? Clicking on a Button on Sales Order -> Opens a PO form, and selects the row?
In the eventhandler of a button click if the PO is not linked to SO by SAP B1 standard functionality
step 1. call ActivateMenu ("2305") of Sbo_application , this opens the PO form
step 2. Change the form to Find mode
step 3. enter po number to the Item UID "8" which is the document number.
step 4. Send enter key, or Clikc On button UID "1" which finds the PO
step 5.read the value from SO form, from matrix "38" line where you selected
step 6. use the code above to locate the line in PO (use # column for position numbers which UID is 0)
at step 5, i think you should select a line from SO matrix which you would like to open.
IN sales order, If you used PO chekcbox on logistics tab to create the PO, you can find a direct link between PO and SO (only in docentries are linked not positions) on sales order, Column UID 158 field name: potrgnum. If this connection is exists, you have an easy way:
SO form, when a user clicks on COlumn 158 (po number), you can implement an eventhandler, which
step 1.read the value from SO form, from matrix "38" line where you selected
step 2. use the code above to locate the line in PO (use # column for position numbers which UID is 0)
By processing theses steps, you can build up you solution.
Regards
János

HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID?

HI.
HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID????
GABRY =)

You need to use
data : grid1 type ref to cl_gui_alv_grid.
call method grid1->get_selected_rows
importing
et_index_rows = i_sel_alvrows[].
a®

Gettingant to row number in select statement

Hello,
I want to retrieve the row number of a record in the select statement. Can anybody help me in writing a query for this in php.
Thanks
Omkarsoft<a> developer

Lookup ROWNUM.
Followup questions belong in a SQL forum, not the PHP forum :)

I can't get the row number of the current selection

Hi all,
How can I get the row number of a selection if I don't know the range selected? I need it to store in variable.
I've tried in many ways, but unsuccesfully.
Thank's in advance.

If you already know the document's name, the sheet's name and the table's name, the easy way is :
--Here you may replace the three values by the current ones
set dName to 1
set sName to 1
set tName to 1
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
tell first cell of the selection range to set {rowNum1, columnNum1} to {address of its row, address of its column}
tell last cell of the selection range to set {rowNum2, columnNum2} to {address of its row, address of its column}
end tell
Yvan KOENIG (VALLAURIS, France) mercredi 9 février 2011 17:22:21

How to incrementally number selected rows?

I want to number the left-hand column of rows in my table. I realise I can just go from cell to cell and number them incrementally but I hoped there was an automatic way to achieve the same result.
I can select the column of rows beginning with the one where I want the numbering to begin, but I can't find any way to incrementally number these selected rows. No help in the Pages help file either. I seem to remember that in Microsoft word I just had to select the column and then click on a 'Numbering' button on the menu.
Thanks.
Message was edited by: esmonde
Message was edited by: esmonde

Welcome to Apple Discussions
Number the first two rows in your table, select both cells & click the little circle at the lower right of the selection box. Now drag down as many rows as you want to fill. This picture is from a Numbers table, but the fill feature works the same in a Pages table. You can see that you can create increments other than one.

Get selected row values from Table view control

Hi ,
I am using transaction ME23N, would like to access row values from item table for selected row. I have written a script as in screen shot and its giving me error at java script step two. I want to get the PR number from item table for selected row.
With Regards
Vishal Lokapur

H Vishal,
Can you please share how you were able to resolve the issue regarding the selected row
in case of a table control .
Regards

How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

Interactive Report: how to get value of given row/col cell in selected row

Hi -- I have an interactive report. Instead of the default behavior of the link going to a single row view, I want it to
go to a form for editing the row. This means I have to be able to populate the form w/ the correct row's information...
so need to get the value(s) for the PK column(s) in the selected row of the interactive report, so I can select the row
from the database.
How can I do this? I see in the report attributes, Link Column section, I can set Rows Uniquely Identified by, and a Unique
Column (though there could be more than one in a PK). I imagine I'd want to use the rowid, but I'm not sure how the
rowid of the selected IR row can be referenced. And at that point, I'm not sure how to get the IR column value for
that row. (Say I'm on the 8th row and I need the first column... How is the column referenced? By a number, it's name,
its heading?)
Or maybe I'm not on the right track at all...
Ideas?
Thanks,
Carol

Hi Carol,
What I´m trying to do is: defining a button such as when you click it a pl-sql procedure is called, which needs as an input parameter the id of the row selected in my form. what I need first, then, is to get the id of the selected row. how did you get it?
Thanks in advance
Francesco

How to deselect the selected row when we come back again?

Hi all,
I have one screen(100),which contains records.User can select any one record and click 'Details' button.Then it will take to screen 110.When I am coming back to screen 110 again.The previously selected row is again in selected mode only.Now if I am selecting another row and click the 'Detail' button.I am getting the error saying that 'Please select one record'.In debugging mode also I checked using the FM get_current_cell but nothing is getting selected surprisingly.
Even I used CALL METHOD grid->refresh_table_display in the PBO of screen 100.
Below is the code I used in PBO of screen 100
ODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'PF100'.
SET TITLEBAR 'TITLE'.
DATA: G_CONSISTENCY_CHECK TYPE CHAR1.
DATA: G_EXCLUDE TYPE UI_FUNCTIONS.
IF container100 IS INITIAL.
*ex_FUNCTIONS-
*-- Check execution mode (foreground/background)
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
CREATE OBJECT CONTAINER100
EXPORTING CONTAINER_NAME = 'CONTAINER100'.
CREATE OBJECT GRID
EXPORTING I_PARENT = CONTAINER100.
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
I_BYPASSING_BUFFER = 'X'
I_BUFFER_ACTIVE = ''
I_CONSISTENCY_CHECK = G_CONSISTENCY_CHECK
IT_TOOLBAR_EXCLUDING = G_EXCLUDE
IT_TOOLBAR_EXCLUDING = IT_TOOLBAR
I_STRUCTURE_NAME =
IS_VARIANT = gs_layout
I_SAVE = 'A'
I_DEFAULT = 'X'
IS_LAYOUT = X_LAYOUT
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING = IT_TOOLBAR
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB = IT_YAPOHDR_MAIN[]
IT_FIELDCATALOG = IT_FIELDCAT[].
IT_SORT =
IT_FILTER =
EXCEPTIONS
INVALID_PARAMETER_COMBINATION = 1
PROGRAM_ERROR = 2
TOO_MANY_LINES = 3
others = 4.
ENDIF.
*--Register enter key for data changed event
CALL METHOD grid->set_ready_for_input
EXPORTING i_ready_for_input = 0.
create object event_receiver.
Register the 'hotspot' event handler method dynamically...
set handler event_receiver->handle_hotspot_click for grid.
Register the User Command event handler method dynamically...
set handler event_receiver->handle_user_command for grid.
Register the User Command event handler method dynamically...
set handler event_receiver->handle_data_changed for grid.
else.
CALL METHOD grid->refresh_table_display.
endif.
ENDMODULE. " STATUS_0100 OUTPUT
The below is the code I used in PAI of screen 110.
MODULE USER_COMMAND_0110 INPUT.
DATA : LT_DETAILS_MAIN LIKE YAPOPLN_ITM OCCURS 0 WITH HEADER LINE,
LV_POP TYPE C,
APPROVE.
CASE SY-UCOMM.
WHEN 'BACK'.
CALL METHOD grid->REFRESH_TABLE_DISPLAY.
CALL METHOD grid->GET_FRONTEND_FIELDCATALOG.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDMODULE.                 " USER_COMMAND_0110 INPUT
Please Let me know if there is any solution.
Thanks,
Balaji

Hello Balaji
The sample report <b>ZUS_SDN_TWO_ALV_GRIDS_7</b> shows basically what I meant in my previous answer. There is no row mark available on the first ALV list. Instead of bothering the user to push a button he or she can simply double-click on the ALV lists and sees the details of a customer.
As you can see there is absolutely no need to free any object instances or rebuild grid controls.
Final remark: based on the function module you mention I assume you are still using fm-based ALV lists. Do not use them. OO-based ALV lists are much easier to develop, to maintain and to enhance.
*& Report ZUS_SDN_TWO_ALV_GRIDS_7
*& Description: Display two ALV lists either in single screen or
*&              two screens
*& Screen '0100' contains no elements.
*& ok_code -> assigned to GD_OKCODE
*& Flow logic:
* PROCESS BEFORE OUTPUT.
*    MODULE STATUS_0100.
* PROCESS AFTER INPUT.
*    MODULE USER_COMMAND_0100.
REPORT zus_sdn_two_alv_grids_7.
TYPE-POOLS: abap.
DATA:
gd_repid         TYPE syst-repid,
gd_okcode        TYPE ui_func,
go_docking       TYPE REF TO cl_gui_docking_container,
go_docking2      TYPE REF TO cl_gui_docking_container,
go_splitter      TYPE REF TO cl_gui_splitter_container,
go_cell_top      TYPE REF TO cl_gui_container,
go_cell_bottom   TYPE REF TO cl_gui_container,
go_grid1         TYPE REF TO cl_gui_alv_grid,
go_grid2         TYPE REF TO cl_gui_alv_grid,
gs_layout        TYPE lvc_s_layo.
DATA:
gs_knb1          TYPE knb1,
gt_knb1          TYPE STANDARD TABLE OF knb1,
gt_knvv          TYPE STANDARD TABLE OF knvv.
*       CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
    CLASS-METHODS:
      handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
        IMPORTING
          e_row
          e_column
          es_row_no
          sender.
ENDCLASS.                    "lcl_eventhandler DEFINITION
*       CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
*   define local data
    DATA:
      ls_knb1      TYPE knb1.
    CHECK ( sender = go_grid1 ).
    READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row-index.
    CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
    CALL METHOD go_grid1->set_current_cell_via_id
      EXPORTING
*        IS_ROW_ID    =
*        IS_COLUMN_ID =
        is_row_no    = es_row_no.
*   Triggers PAI of the dynpro with the specified ok-code
** CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DETAIL' ). " not on 4.6c
    CALL METHOD cl_gui_cfw=>set_new_ok_code
      EXPORTING
        new_code = 'DETAIL'
*      IMPORTING
*        RC       =
ENDMETHOD.                    "handle_double_click
ENDCLASS.                    "lcl_eventhandler IMPLEMENTATION
PARAMETERS:
p_single RADIOBUTTON GROUP radi, " single screen
p_double RADIOBUTTON GROUP radi. " two screens
START-OF-SELECTION.
SELECT        * FROM knb1 INTO TABLE gt_knb1
         WHERE bukrs = '1000'.
" Add dummy customer without any master sales data
CLEAR: gs_knb1.
gs_knb1-kunnr = 'DUMMY'.
gs_knb1-bukrs = '1000'.
INSERT gs_knb1 INTO gt_knb1 INDEX 1.
* Create docking container
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
      ratio                       = 90
    EXCEPTIONS
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF ( p_single = abap_true ).
    PERFORM create_splitter_container.
ELSE.
*   Create 2nd docking container
    CREATE OBJECT go_docking2
      EXPORTING
        parent                      = cl_gui_container=>screen0
        ratio                       = 90
      EXCEPTIONS
        OTHERS                      = 6.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
IF ( p_single = abap_true ).
*   Create ALV grids
    CREATE OBJECT go_grid1
      EXPORTING
        i_parent          = go_cell_top
      EXCEPTIONS
        OTHERS            = 5.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CREATE OBJECT go_grid2
      EXPORTING
        i_parent          = go_cell_bottom
      EXCEPTIONS
        OTHERS            = 5.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ELSE.
*   Create ALV grids
    CREATE OBJECT go_grid1
      EXPORTING
        i_parent          = go_docking
      EXCEPTIONS
        OTHERS            = 5.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CREATE OBJECT go_grid2
      EXPORTING
        i_parent          = go_docking2
      EXCEPTIONS
        OTHERS            = 5.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
* Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR go_grid1.
* Display data
gs_layout-grid_title = 'Customers'.
CALL METHOD go_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNB1'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_knb1
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
gs_layout-grid_title = 'Customers Details (Sales Areas)'.
CALL METHOD go_grid2->set_table_for_first_display
    EXPORTING
      i_structure_name = 'KNVV'
      is_layout        = gs_layout
    CHANGING
      it_outtab        = gt_knvv " empty !!!
    EXCEPTIONS
      OTHERS           = 4.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro(s)
gd_repid = syst-repid.
IF ( p_single = abap_true ).
    CALL METHOD go_docking->link
      EXPORTING
        repid                       = gd_repid
        dynnr                       = '0100'
*        CONTAINER                   =
      EXCEPTIONS
        OTHERS                      = 4.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ELSE.
    CALL METHOD go_docking->link
      EXPORTING
        repid                       = gd_repid
        dynnr                       = '0100'
*        CONTAINER                   =
      EXCEPTIONS
        OTHERS                      = 4.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL METHOD go_docking2->link
      EXPORTING
        repid                       = gd_repid
        dynnr                       = '0200'
*        CONTAINER                   =
      EXCEPTIONS
        OTHERS                      = 4.
    IF sy-subrc <> 0.
*     MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*                WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
ENDIF.
* NOTE: dynpro does not contain any elements
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
" NOTE: screen '0200' uses same flow logic as '0100'
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
* Refresh display of detail ALV list
CALL METHOD go_grid2->refresh_table_display
*    EXPORTING
*      IS_STABLE      =
*      I_SOFT_REFRESH =
    EXCEPTIONS
      OTHERS         = 2.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
    WHEN 'BACK' OR
         'EXIT' OR
         'CANC'.
      IF ( syst-dynnr = '0100' ).
        SET SCREEN 0. LEAVE SCREEN.
      ELSE.
        SET SCREEN 100.
      ENDIF.
*   User has pushed button "Display Details"
    WHEN 'DETAIL'.
      PERFORM entry_show_details.
      IF ( p_single = abap_true ).
      ELSE.
        SET SCREEN 200.
      ENDIF.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form ENTRY_SHOW_DETAILS
*       text
* --> p1        text
* <-- p2        text
FORM entry_show_details .
* define local data
DATA:
    ld_row      TYPE i,
    ls_knb1     TYPE knb1.
CALL METHOD go_grid1->get_current_cell
    IMPORTING
      e_row = ld_row.
READ TABLE gt_knb1 INTO ls_knb1 INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT        * FROM knvv INTO TABLE gt_knvv
         WHERE kunnr = ls_knb1-kunnr.
ENDFORM.                    " ENTRY_SHOW_DETAILS
*&      Form CREATE_SPLITTER_CONTAINER
*       text
* --> p1        text
* <-- p2        text
FORM create_splitter_container .
* Create splitter container
CREATE OBJECT go_splitter
    EXPORTING
      parent            = go_docking
      rows              = 2
      columns           = 1
*      NO_AUTODEF_PROGID_DYNNR =
*      NAME              =
    EXCEPTIONS
      cntl_error        = 1
      cntl_system_error = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get cell container
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 1
      column    = 1
    RECEIVING
      container = go_cell_top.
CALL METHOD go_splitter->get_container
    EXPORTING
      row       = 2
      column    = 1
    RECEIVING
      container = go_cell_bottom.
ENDFORM.                    " CREATE_SPLITTER_CONTAINER
Regards
Uwe

Selected row number

Similar Messages

Maybe you are looking for