Selecting a note in matrix editor and it doesn't sound

I always get the tone of the note when I select it. Now, for some reason, it is muted. What setting did I inadvertently change?

Make sure that the Audio Instrument track with the MIDI data you are editing is actually selected.

Similar Messages

Option + Drag notes in Matrix editor problem

I cant say when this started but at some point holding option while dragging a note to copy it stopped working as expected. Basically I want to copy a note in the matrix editor and I want it to go where I drag it (am I asking too much?). Right now as soon as I drop the note in the desired position it jumps forward several beats. Did I do something that changed the way the option key works? If I just drag the note without holding option the note goes where I want it. But as soon as I option + drag. I get this wackyness!! its hugely frustrating! Thanks in advance for any help.

Well I have a workaround now but am still confused. I discovered that if I click the little button "featuring a square graphic" in the upper left corner of my matrix window (manual says its called the "Up One Display Level button—or
UDL button"), it fixes the problem... for that matrix edit window only. As soon as I close it and reopen it (by double clicking on a midi region) it goes back into crazy freak **** mode. Something else I noticed is that when I reopen the matrix editor window the little screen read out area (that displays the notes etc under Edit/Functions/View) says "sel 1" right above the notes etc. It says this when its in crazy freak **** mode. When I click the UDL button it changes from "sel 1" to "1/AudioInst 1" which is the instrument for the midi Im working on. So how do I get crazy freak **** mode to stop messing up my matrix editor windows? Its great to have a workaround but its a pain in the butt to have to remember to push this button ( that I never needed to push before) so I can properly option+drag a midi note. I tried reading the manual about this button but I just dont get what its for (other than turning off freak **** mode). And I forgot to mention my logic version before: Logic version 7.2.1 (959.30) Thanks again in advance if you can help me:)

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

Hi Hardy Tasso,
Are you seeing this problem since first launch of PSE13 after installation or recently?
Please try:
Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
Thanks,
Anwesha

On rebooting to install windows get message: 1:2: Select CD rom Boot Type:_ and keyboard doesn't work! type

Trying to instal windows again (new hard drive) via bootcamp on my oldish Macbook;
on rebooting to install windows I get a dos screen with the message:
1
2
Select CD rom Boot Type:_
and keyboard doesn't work!
Tried an external keyboard and nothing
Any ideas?

To get the disk out restart while holding down the mouse button. To get back to OS X restart while holding the option key and when the boot screen appears select the volume with OS X.

IMac screen appears to have smudges under the glass. They are not on the surface and it doesn't matter what wallpaper is in place.

iMac screen appears to have smudges under the glass along the top of the screen. They are not on the surface and it doesn't matter what wallpaper is in place. Anyone else had this happen?

The " glass" front of your iMac is really not glass, at all, but an optically clear polycarbonite (plastic) that a black border painted or possibly "printed" on the backside (to hide the strong magnets that hold this cover on) that has a metal frame glued to the back to which this frame is held in place with very strong magnets.
You use one or two small suction cups or a suction cup from a windshield mounted mobile GPS mount or purchase a small commercial glass cup, that is used to handle bare glass, to get the polycarbonite frame off.
The reason I mention the material is polycarbonite is that you should NOT be using ANY type of retail/commercial window glass cleaners on this front glass or on the LCD screen.
Polycarbonite easily scratches and clouds when using ANY conventional glass cleaning solutions.
You need to use a lint-free, microfiber style cloth dampened in warm water (completely wring the water out of the microfiber cloth to the point cloth is just warm and damp with NO water dripping at all from the cloth) and use this to get the screen and glass don't screen clean.

PSE 8.0 Will Not Open (Including Editor and Organizer)

I have been using PSE 8.0 for three or four years now, and I have never experienced any problems with it. Today, after installed a Wacom Intuos Creative Pen Tablet, my PSE 8.0 would not open-- nor would Editor and Organizer. I tried uninstalling and reinstalling the program, renaming certain files (as read in other answers), creating shortcuts to bypass the Welcome Screen (which also will not appear), among other solutions that I read about for similar problems. Whenever I attempt to open Organizer, a crash report appears, stating that the program has quit unexpectedly--that's all it says. If I try to open PSE 8 or Editor, the circle next to my cursor appears for a moment, but soon it disappears without a single pop-up or explanation as to why the program won't open. Since I cannot access the Welcome Screen, I cannot locate the Preference file to change the name/delete it. If it matters, I use Windows 7.
Any and all help is appreciated. I'm going a bit insane without my lovely Photoshop to doodle in. ;n;
Thank you,
~ Mongoose

EDIT: I found the Preferences within the PSE folder, and I renamed it; afterwards, I tried to open PSE again. It reset the Preferences, yet it is still telling me that PSE has unexpectedly quit. /EDIT
I went into the PSE folder and attempted the "three finger salute" while clicking on Organizer, but all it brought up were the Organizer Properties.
Also, within the past hour, PSE has been randomly popping multiple times up to inform me that it unexpectedly quit, yet I have not tried to open it recently. I am not sure if that is important or not.

Select query not working with like & and operator

Hi,
The below is the select query which is used to select only the failed rollup jobs from DB table ( background jobs ) the status 'A' which means only the failed roll up jobs.
select jobname status from v_op into table zjob_rollup where jobname like '%ROLLUP%'
                                                         or jobname like 'BI_AGGR%'
                                                         and status like 'A'.
Right now my internal tables is picking the job name other than status A also.
Can you please help.
Note: Ps consider the performance of select query also.
Thanks,
Siva

Hi,
select jobname status
     from v_op
     into table zjob_rollup
     where ( jobname like '%ROLLUP%' or jobname like 'BI_AGGR%' )
                  and status = 'A'.

Moving notes in Matrix editor

Is there a key command to move notes up/down without having to drag with mouse?
Thanks

that's your left and right arrows. unless you have set them to be something different that overrides it. actually i am not all that sure that it was default, something stirs in my recollection about setting the command.
the key command is something like "transpose by +1/-1"
I think you'll find it in various editors.

Not able to boot, and PB doesn't react to install disk

Hello.
I upgraded my powerbook to 10.4.8, and then it wouldn't boot up after i restarted it. It just shoows the apple, and the round loading thing.. Then i can quickly see the "starting mac os x" prompt, but it quickly (within a second) disappears, and then all i can see is a blue screen.. Not like the windows BSOD, it's just blue. Like the starting prompt would have been there, it just isn't. Then at around every 10th second I can quickly see the round loading thing, but that quickly disappears again.. All in all, very weird. And suddenly.
But I thought it then would be a good time to reinstall mac os x, just you know, start of fresh. So I inserted the disk 1 (the version I have on DVD is 10.4.4 i think), but nothing happens. Not even the slightest reaction to the disk being in the drive.. Just the excact same as described above.
I have no idea of what to do, except take it to a store.. But, it would be nice to avoid that..
Thank you in advance
Ps. I am really not up for totally formatting my harddrive since I have precious data.. If that is the only thing to do, I would like to know how to get the HD out and then back it up on another mac/pc ..

Hello.
[snipped]
Ps. I am really not up for totally formatting my
harddrive since I have precious data.. If that is the
only thing to do, I would like to know how to get the
HD out and then back it up on another mac/pc ..
Greetings isakk.
If your PB is under warranty, you may not want to physically remove your HD; that might invalidate your warranty. If you don't care about that, do a search on the Web for "PowerBook HD replacement" and see what turns up. There are a few third-party guides published out on the Web that goes through the step-by-step process in removing/replacing a PowerBook HD.
But may I suggest another alternative? If your PB can act as a FireWire target disk, you can connect it up to another FireWire equipped Mac and access the PB's HD like any other externally connected HD. The process is quite simple:
1. With the PB off (and, if you'd like, the other Mac as well), connect the two Macs with a FireWire cable.
2. Boot up the other Mac normally, if not already on. Wait for the normal Desktop to appear.
3. While powering up the PB, press and hold the "T" key on the keyboard. This will trigger the PB's firmware to boot up as an external FireWire drive. The PB's screen will simply display a large FireWire icon slowly bouncing around; this is the sign the PB is in FireWire target disk mode.
4. On the other Mac's Desktop, your PB should appear with a typical FireWire HD icon. From there, you should be able to manipulate the files on your PB's HD as you can on any other HD.
FireWire target disk mode is also handy to reload the operating system in a pinch. Provided your OS install/restore discs will work on the other Mac, you can use that Mac's CD/DVD drive in which to put your OS disc, start up the OS install process, and select the FireWire target HD as the recipient of the process. While this may not be an Apple "sanctioned" capability for installing or repairing an OS on a HD, it does work for some Macs.
Hope this info helps. I apologize for not being able to provide useful information from the meat of your post; I haven't installed the 10.4.8 update yet (I'm waiting to see what the fallout is for those who like to play on the bleeding edge of updates).
Regards,
Steve

Not Visible in iTunes and YouTube doesn't Connect in 2.3

I was happily working away with ATV until upgrade 2.3 and iTunes 8 came out. Since then, I have reverted back to factory reset several times and find that this is the only reliable setup, I'd love to have my MobileMe gallery and YouTube working again but it is more important to have the kids' videos and the family photos available.
I have an MBP, iTunes 8.02, Time Capsule (mixed N&G not hidden), ATV. What's working is the following:
Movie Trailers
MobileMe Gallery
Flickr
I have however lost the following
Visibility from the MBP iTunes
YouTube doesn't connect
It looks as if this is another factory reset and resync of the 100GB of movies/photos/music again..... I am getting really ticked off by all of this.
Can anyone out there answer the following
what have YouTube and iTunes visibility have in common?
why isn't Apple more responsive to the numerous posts?
how can this be resolved?
I understand that there are many posts out there on this but many speak of equipment incompatibilities but I am totally Apple. Any help would be appreciated and I will detail the solution for my circumstance if I get one.

here is what i posted a bit ago. 1st i believe u need the 2.3 upgrade for utube.
i have x10.5.6 imac and i did this:
if you have ANY problems with ATV, first thing you do is (on your mac) go to finder, applications, utilities, disk utility, then click on the disk containing itunes (mac HD for me) then choose "repair disk permissions". i then rebooted.
next if (or when) the device doesn't show (in itunes), go on ATV - settings, general, network, configure wireless (u will have to choose your network and input your password again) then done. that makes my device show up.
if the connect to itunes grays out do the above again, *don't choose to disconnect from itunes!* this seems to work to resume the connection, rather than start all over again.
This is what i kept doing - starting over, using reset and also stopping the current sync connection. this is what u should NOT DO.
the first item (utility disc correct) fixes the firewall problem (so far anyway) i have accept all incoming on my mac firewall, but not on my router (belkin) no problems since i have followed all this stuff i am writing.
make sure all the items you want to see in your ATV are check marked in your itunes, otherwise itunes thinks you don't want to view those items.
let itunes automatically choose, as long as you have everything checked it should all show up.
when itunes chooses, some items are streamed, some are synced. UNCHECK the "show only synced items" i have never had any luck with the custom
if (when is more like it for me) the itunes stops syncing, now i click sync again or go in the ATV and redo all that network gobbledegook - i changed my password so it was easier to type in! - and it continues from where it left off! REPEAT, DO NOT CANCEL AND START OVER ON THE SYNC TO ITUNES, that is what i kept doing and it was continuously reloading everything.
you do have to keep itunes on, though, and i have my settings so my computer is never put to sleep (but my monitor goes to standby) I am not brave enough right now to try the custom, as i said it seems that keeps disappearing on me. hope this works for you

ITunes not recognizing new PC and, therefore, doesn't recognize my IPOD

ITunes not recognizing new PC even though it says it is authorized. The result: ITunes doesn't recognize my IPOD. It does still have my old PC name attached to my account. What can I do to rectify this situation?

It could be a tiny bit of fluff in the dock that's preventing a particular wire from connecting. A magnifying glass and a decent light should let you inspect the port. If there is any rubbish lodged in the dock opening use a can of compressed air or a fine needle to ease it out taking care not to damage the connectors.
tt2

Matrix editor: make selected notes the same length broken?

I used to select a group of notes in matrix editor, then drag one of those with SHIFT+ALT to make them all the same length.
This appears as broken in LPX (10.0.6), as the behaviour is inconsistent: sometimes it works as expected (as in LP9), other times it just de-selects the clicked note.
This looks like a bug to me... Any ideas?

hi Eriksimon
thanks that actually helped!
However, ALT+SHIFT is not SHIFT so I struggle to understand why they changed the behavior from LP9 breaking users' gesture memory to no apparent advantage.

'Link' button in Logic 7 Matrix Editor

Can anybody help me with a niggle I have in Logic. Whenever I select Matrix Editor and want to drop into an existing midi recording I do so and a new editor window pops up obscuring the existing midi notes I want drop into. This is due to the Window Link function on the left hand menu and is only resolved once the default yellow icon has been toggled to either pink or grey. As I don't see the need to open a new window on drop-in I want to set the default Link icon to pink or grey so as not to have to toggle this button every single time I open the editor window but can't find a way to do this.....is there ?
Hope someone out there has had a similar experience and knows how to change this. Thanks

Screensets have always been a bit of a grey area for me.
There ya go!
Seriously, this is such a fundamental concept, you'll wonder how you managed without it before.
Open a new song (ultimately we'll need to save our settings as our autoload so every song starts with the same settings for for now we'll just explore functionality).
You'll be on screenset 1, as evidenced by the "1" displayed to the right of the menus.
Ok - press "2" on your keyboard - the windows will change to whatever screenset 2 is set up to be. Close them all, and open a matrix editor. Position it full screen, and turn link on (yellow).
Now press "1" to go back to screenset 1.
Now, what happens is, when you want to edit a region, simply select it in the arrange, and press "2" - the screenset will change to the matrix editor, with the selected sequence displayed in it. When you are done editing, simply press "1" to go back to your arrange, and select a different region for editing, press "2" to flip back to the matrix editor.
Now, it gets much more flexible than this - for example, on my "editing" screenset I have a matrix editor, event list, floating event list, marker window, transport, a second small arrange for directly selecting regions to edit and some other stuff. In contents link mode, as soon as you select a region in the arrange the editor windows will immediately display the contents of that region.
Try it out - it's a 1000% better solution than continually opening, resizing and closing windows all the time - yuk!

I downloaded the latest itunes update and it will not play my music and the sound on my computer has been disabled.

I downloaded the latest itunes update on my HP desktop with Windows Vista and it will not play my music and has disabled the sound on my computer?

Good Morning jsacc38,
The resource below will help you with the issues you are having with the iTunes for Windows update on your PC:
If you can't install or update iTunes for Windows - Apple Support
http://support.apple.com/en-gb/HT201668
Learn what to do if you can’t install or update iTunes on your Windows PC.
If you can’t install iTunes on your Windows PC, or if you see “error 7” or “error 2” after you install the software, follow the steps below in order.
If you see a different error when trying to launch iTunes, follow the steps in iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
Make sure that you're logged in to your computer as an administrator.
If you're not sure if you have an administrator account, read Windows 7: How do I log on as an administrator? You can also refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Install the latest Microsoft Windows updates.
To download the latest updates, visit the Microsoft Windows Update website. iTunes for Windows requires Windows XP, Windows Vista, Windows 7, or Windows 8, with the latest Service Pack installed. If you can’t install the updates, refer to your computer's help system, contact your IT department, or visit support.microsoft.com for assistance.
Visit the iTunes download page. Click Download Now to download the iTunes installer. When prompted, click Save (instead of Run).
Right click on iTunesSetup or iTunes64Setup (the installer you downloaded in step 3).
If you have Windows Vista, Windows 7, and Windows 8: Choose "Run as administrator."
If you have Windows XP: Choose Open.
If you've previously installed iTunes, the installer will prompt you to repair the software.
After the repair is complete, restart your computer and try launching iTunes.
If iTunes fails to install or repair, it might be necessary to remove components left from a previous installation of iTunes and then reinstall.
Remove and reinstall iTunes and other software components for Windows XP.
Remove and reinstall iTunes and other software components for Windows Vista, Windows 7, or Windows 8.
Songs you bought from the iTunes Store or imported from CDs are saved in your My Music folder by default. Deleting iTunes won’t delete your music.
Disable conflicting software.
Some background processes can cause issues that prevent applications like iTunes from installing.
If you installed security software and are having issues installing iTunes for Windows, you might need to disable or uninstall security software to resolve the issues.
Restart your computer.
After the restart, and adjusting the software running on your PC, install iTunes again.
Get more help
If the steps in this article don't help you resolve the issue, you might be able to find a solution through a search of the Microsoft support website.
If you receive errors regarding inaccessible registry keys during installation, try the steps found in "Could not open key" message when installing iTunes or Apple components for Windows.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Feb 2, 2015
Have a good weekend!
- Judy

Selection tool not moving frames

Hi,
I'm new to InDesign so my problem might be an easy fix. I'm making a large photobook which is now 112 pages long. Everything has been working fine until now. Today when I open the program the selection tool seems to do everything but move a frame. I'm wondering if I have inadvertently disabled this function or whether it is something more serious. If so can I re-install the software to repair the existing version or do I need to uninstall first?

Are you able to select the frame you want to move? You may have inadvertently locked the layer. Also, be sure you are using the regular selction tool (Black arrow) not the Direct Select tool (White Arrow).
If you are using the correct tool, and you are able to select, but not move the object (and it is not locked), check to see if the problem exists in a new file as well. If it happens in new files, replace your preferences: http://forums.adobe.com/thread/526990 If it is isolated to the siingle file, export to .inx: http://forums.adobe.com/thread/526991

Selecting a note in matrix editor and it doesn't sound

Similar Messages

Maybe you are looking for