Selecting Airport Extreme crashes Finder, have to connect to it as a server

I just started getting this out of nowhere.
I have not installed anything new, or moved or reconfigured any hardware recently.
I have to open Finder and connect to my Airport Extreme as a server.
If I try to select it from the Finder under 'Shared' in the sidebar, Finder crashes.
Every. Single. Time.
One thing I just noticed is that my I used to have to click [Drive name] [Root folder with same name as drive folder] -> Folders.
That 2nd step is gone now. It's just [Drive name] -> Folders.
I have a feeling a manually deleting my Time Machine sparse bundle or something borked this. Any ideas?

What the actual.
I rebooted. Everything is fine now. Back to the way it was.

Similar Messages

Have airport extreme, square model, have a external harddrive to use as back up(formated for mac)hooked it up to the usb port in back. can't find it on my computer. what am i doing wrong

have the airport extreme, square model. have a external harddrive formated for mac hooked up to the usb port in back.
i can't find the harddrive on the computer for back up in timemachine. what am i doing wrong?

First, if you are not aware, you need to know that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme.
That may be part of the problem here, so if you want to continue to try this, you need to understand that there are no guarantees of success.
Some users do seem to be able to make this work, but most have some problems and some....like me....have nothing but problems when they try this.
If you want to continue to try this, the first thing to verify is that the drive is formatted specifically in Mac OS Extended (Journaled). Have you verified that the drive is formatted correctly by connecting it directly to your Mac and using Disk Utility to check?
Some drives that are advertised as being "compatible for Mac" are not formatted correctly in Mac OS Extended (Journaled). Time Machine has no chance of success unless the drive is first formatted correctly.
I would also ask that you consider leaving the drive connected to your Mac for Time Machine backups. That will be supported, and is a far more reliable way to keep backups if your data is important to you.
Next, we need to know what operating system you are running on your Mac. If you do not know, click the Apple icon in the upper left corner of the screen and then click About This Mac. Post back with the OS X Version number that you see there.

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

I have a 3rd party hard drive with movies on it ,it is connected to my airport extreme. The AE is connected to my tv via ethernet cable. Can I stream my movies to the Tv ?

Not without a player..
The AE is a dumb file server.. the hard disk you plug in is an even dumber hard disk.
There are no smarts in this setup.. not even DLNA. So the TV would have to be an extremely smart one to read raw files on a network drive.. none do that I know of.
A solution is WD live TV.. it can read files from just about any file source on network and play them to the TV.
Nothing apple makes will do that.. ATV is a streamer not a media player. Everything in the Apple world is tied up with itunes. So you must have a computer running itunes to use it.
You can download a more generic player for ipad, and put that as part of the network.. but you still need ATV to display the video.

I have just bought a Humax PVR and Humax W-Lan dongle to connect to my Airport Extreme. I have put the mac address into the AE. The installation screen is picking up my network name no problem but it won't connect to the internet. Can anyone help please?

I have just bought a Humax 7500T PVR and a Humax W-Lan dongle to connect to my Airport Extreme.
I have put the mac address into the AE. The installation screen on my TV is picking up the network name but once appied it won't connect to the internet.
I've a few other things connected to the AE such as computers, ipad, itouch, etc, and have never had a problem connecting these once I've entered the mac address into the AE. Can anyone help me with this please?

have you made sure that the network setting in the system preferences is set up to use dhcp? if not i would try changing it so that it shows that it is getting its address by dhcp

Airport Extreme crashing G5/Tiger 10.4.11

Okay, I've read through some of the archived threads regarding AirPort Extreme crashing 10.4.11 and was wondering if this issue has been resolved? Unfortunately I have to run Tiger on my office machines in order to run Classic, but that shouldn't be an issue. I've been with Apple exclusively since 1987 and this is just so unlike them to not address this issue in a timely manner or at least make it known that this device does not work with Tiger.
I guess I could go on ranting but what's the point... How hard can this be guys?

same problem here. i recently upgraded my old flying saucer airport extreme to a new one, and i have multiple machines and multiple OS's, old and new.
my old g4 tower is running 10.4.11 and crashes the second i turn on wireless. on top of that i cannot upgrade the OS because it does not have intel processors. however my older laptop is running the same OS and has the same airport card as the tower and it continues to connect to the airport fine.
i would gladly upgrade my OS on both old machines if i could (unless i am missing something and it is possible).

This Airport Extreme base station can't connect to iCloud

I have a Airport Extreme base station (model A1408) running firmware 7.6.4.
In troubleshooting a Back to My Mac issue, I noticed that the configuration page for the base station had a yellow dot next to my apple id in the "Back to My Mac" section of the "Base Station" tab, with words underneath that say, "This Airport Extreme base station can't connect to iCloud".
When I delete the id and re-enter it, the dot goes green and no errors are generated (the id/password tokens are accepted). Then, I push "Update", and after the base station comes back, the light is yellow again. (To be clear, the dot next to the apple id is yellow, not the base station status light, which is always green.)
I'm connected to Xfinity Cable Internet service via a Motorola SB6141.
Everything iCloud related works for my various iOS and MacOS devices except Back to My Mac.
Can anyone point me to a solution? I've already been through Apple's troubleshooting and support docs related to Back to My Mac.
Thanks in advance!

NEVER MIND!
After reverting to the old LinkSys router, I left the AEBS powered up all night. This morning, I tried once again and the AEBS mysteriously started working with my laptop after reconnecting and power-cycling the cable modem. Go figure!
Unfortunately, the iMac in another room doesn't seem to be able to join the new network, but I'll close this thread and perhaps open a new one after doing some more trouble-shooting.
Thanks for your comments and suggestions.
-- Mike

My brand new out the box airport extreme won't let anything connect to it.

My brand new out the box 5th gen (2013) airport extreme won't let anything connect to it. I've tried several setups from sratch by the book. multiple resets and restores still nothing. It just keeps telling mt that the password is in correct even though it is 100% right.
My curren set up is as follows. Phone Line -> ADSL2+ router -> Airport extreme. There is also an old airport express running of the router, this was done because the airport extremem was failing to work.
Trying to connect:
2x iPhone 4s
2x macbook air
2x Mac Pro.

You will want the Extreme to be in bridge mode if it is currently disabled. (see image below)
This will allow the ADSL2+ router to perform two important functions for your entire network: 1) Provide both the DHCP & NAT services, and 2) Provide PPPoE support to allow access to your ADSL ISPs network.
If the Extreme is left in its default state, a router, it will conflict with the first item and you will have want is known as a "double NAT" condition. Something you will want to avoid.

What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2 modem and I can't get the configuration working. What modem does Apple recommend?

I am having problems setting up airport extreme.
What ADSL modem do you advise to use with my new airport extreme? I have tried a basic TP-Link ADSL2+ modem and I can't get the configuration working. What modem does Apple recommend?

Ok well I have looked around some more and have found this to be the most up to date official response to my question as seen at this link here:
http://www.actiontec.com/support/product_details.php?pid=41#q27
Can I Bridge the Actiontec MI424WR router that Verizon provided, when I signed up for FiOS service?
The MI424WR does not have a bridging option, and neither Verizon nor Actiontec support attempting to bridge it.
The desire to bridge the MI424WR is based on a misunderstanding that it is a modem as well as a router. Actiontec does produce DSL Gateways that have a Transparent-Bridging option, which bypasses or disables the router function and allows the Gateway to act simply as a DSL modem, when it is enabled. Many consumers do not realize that with FiOS, the ONT (typically outside the home) is the device that handles changing the FiOS signal from Fiber to either Ethernet or Coax, and that the Router is just a Router, and if it was bridged or bypassed, it would be a device without a function. For most Verizon FiOS customers their service would completely stop if the MI424WR was bridged, because the Video on Demand service is dependent on it to work.
If your ONT is connected to the Actiontec MI424WR router via Coax, the MI424WR is required due to the Coax connection. But if the ONT is connected to the MI424WR via Ethernet, then in most cases some other router can be substituted for the MI424WR, and it can be removed."
So it looks like I will be calling Verizon support to see about getting the Ethernet connection installed and getting another modem...

Airport Extreme Cannot see Live Internet Connection from Cable Modem

Hi,
When I run a cable directly from my cable modem to my MacBook everything works fine. In fact, that is how I am connected to the Internet right now.
However, when I run the same cable into my Airport Extreme (AE) and then connect my MacBook to the AE (wired or wireless), the AE reports a problem connecting to the Internet. This is a new situation as everything has been working fine for months. I have changed nothing in this set-up for it to stop working.
I can only assume the at the AE is broken: the Internet connection is live, it was working fine for months and then stopped working. Is there anything I should try before I throw the AE in the garbage?
Thanks in advance.

Welcome to the discussions!
It appears as if you may not be aware that cable modems must be completely reset whenever the device that they are connected to changes. The reason for this is that the cable modem "remembers" the device that it has been connected to. In your case, it's "remembering" your computer and looking for it when you plug it in to the AirPort Extreme.
You need to make your modem "forget" your computer. Here's how:
o Push the reset button on the modem if there is one on your modem
o Power the modem down immediately after you push the reset button
o Pull the battery in the modem if it's easily accessible
o Leave the modem powered down at least 20-30 minutes (Some ISPs take longer)
Power down the rest of your network as well.
After the power down period, start the modem first and let it run 3-4 minutes by itself
Then start the Airport Extreme (you may need to "hard reset" the device again to start over on the configuration) and let it run a few moments
Then start your computers one at a time
Please post back on your progress. Remember, if you need to connect your computer directly to the modem again, you must reset the modem again because it will "remember" the AirPort Extreme if you have reset it correctly.

Help setting up using my airport extreme to share my internet connection

I want to use my built-in airport extreme to share my internet connection with my PS3. I have a verizon aircard and have read on the internet that this can be done (but not necessarily with airport). I turned on internet sharing with airport and my ps3 reads my connection and obtains my ip address, but then it says could not connect to internet due to DNS server error.
Could someone run me down the process step-by-step so I can see what I'm doing wrong? Thanks for your help.
P.S. I have a iMac running on leopard if that matters.

ll959reds, Welcome to the discussion area!
Unfortunately the Internet Sharing provided by OS X does not provide nearly the configuration possibilities as even a very inexpensive wireless router.
Also if the firewall is enabled on the iMac, it applies equally to all ports including the AirPort (wireless) connection to the PS3. Therefore the firewall will block many of the requests from the PS3. To solve this issues, you would either need to disable the iMac's firewall or configure the iMac's firewall to allow connections via the AirPort side.
A much simpler solution is to use a wireless router instead of your iMac to provide the connection for the PS3.

Just purchased Airport Extreme ac and lost internet connection 3X. Reset to factory settings and worked for 2 days then lost connection and remedied by unplugging power supply. Anyone else having problems?

Just purchased Airport Extreme ac and lost internet connection 3X in less than one week. Fisrt time, reset to factory settings and fixed problem. Has occurred 2 additional times and connection re-established by unplugging AP extreme. Anyone else having these problems? Do I have a bad router? Thanks.

I definitely think this is a Mavericks issue. My iMac running Mavericks is the ONLY system in the house that drops the network randomly while all other systems never lose the network. No idea how to resolve this, but here is the workaround I'm posting:
I've had the 'network drop' issue with my Airport Extreme for the last 2 months. It reconnects when I pull the ethernet cable and plug it back in. I've tried downgrading the AE firmware, resetting to factory, etc. Nothing worked. I finally threw in the towel and created a script that monitors my network connectivity and restarts my interface if it senses it has dropped:
#!/bin/ksh
while true
do
yup=`ping -c1 -t2 www.google.com|grep from`
if [[ -n $yup ]]
     then echo "Internet is connected!"
else
        ifconfig en0 down; ifconfig en0 up
        echo "Down at `date +%m%d%Y%H%M%S`">>./dropped.out
fi
sleep 5
clear
done
I know its a workaround, but its saving me the headache of constantly pulling my cable and putting it back in!
Good luck!
-Mike Gray

How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings.

How do I forward a port on my Airport Extreme? I have a Belkin @TV (it's like a sling box), and to watch it over cellular on my iPhone I need to forward the port 49177 in the router settings. A simple set of instructions would be greatly appreciated.

How to Port Forward on AEBS

AirPort Extreme Crash during PPTP connect using VPN on demand

I can reproduce this crash consistently every time.
My AEBSn is running 7.4.2. My MBP is running 10.6.2.
I set up a PPTP connection, tick "send all traffic over VPN connection" in the advanced options.
I add a domain to the "VPN on Demand" list and apply changes.
I click connect, and the AEBS light immediately goes amber. A few seconds later, it's back to green and everything is groovy...unless I try to connect again.
The problem is solved by simply removing the domain from "VPN on Demand."
Here's the relevant snippet from ppp.log:
Sat Jan 30 00:22:36 2010 : PPTP connecting to server 'xxxx.xxxx.xxx' (xx.xxx.xx.xx)...
Sat Jan 30 00:22:37 2010 : PPTP connection established.
Sat Jan 30 00:22:37 2010 : Using interface ppp0
Sat Jan 30 00:22:37 2010 : Connect: ppp0 <--> socket[34:17]
Sat Jan 30 00:22:40 2010 : pptpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.14), deleted interface setting (name: en0, family: Ether, address: 10.0.1.14, subnet: 255.0.0.0, destination: 10.0.1.255).
Sat Jan 30 00:22:40 2010 : linked service found: Setup:/Network/Service/C1126C24-140A-4AE4-A35D-553148185E2F/Interface
Sat Jan 30 00:22:40 2010 : starting wait-interface timer for pptp: 20 secs
Sat Jan 30 00:22:51 2010 : pptpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.14), deleted interface setting (name: en1, family: Ether, address: 10.0.1.5, subnet: 255.0.0.0, destination: 10.0.1.255).
Sat Jan 30 00:23:00 2010 : pptpwait_interfacetimeout: 20 secs TIMEOUT waiting for interface to be reconfigured. previous setting (name: en0, address: 10.0.1.14).
Sat Jan 30 00:23:00 2010 : PPTP has detected change in the network and lost connection with the server.
Sat Jan 30 00:23:00 2010 : Connection terminated.
Sat Jan 30 00:23:00 2010 : PPTP disconnecting...
Sat Jan 30 00:23:00 2010 : PPTP disconnected
Funny, huh?

Hi
I have had this problem with my Airport Extreme since day 1 and it is extremely irritating. Using Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2003 I can crash the router any time I like (or more to the point, really really dislike) by simply initiating a PPTP VPN from any client (wired or wireless) behind the Airport Extreme. The device flashes orange, drops everyone's internet connection and then about a minute later, comes back up again.
Whenever I have to connect to another site using VPN, I need to use NextG internet connection instead of my home cable connection. Any help with this would be gold because other than this really annoying problem (oh and the 'must reboot everytime you make a minor modification to configuration' requirement) I find it a great rock solid wireless access point.

How can I connect airport extremes using a wired-switch connection and have roaming capability?

My goal is to have 2 airport extremes and 1 timecapule connected via an ethernet switch so that I can enable roaming. I have no problems connecting them wirelessly where I create the wireless network on a primary airport wireless then add the others "extending" the network. However, if I attempt to do the same thing with a wired connection everything stops working (no connections from any airport). Here's the topology I'm trying to achieve. I believe my problem relates to the switch and the fact that I am serving up DHCP from a separate server. Is there a way I can achieve this (or similar) type of configuration? Thanks in advance.
BTW, I have read the various documents on the roaming network topology but none seem to be a match to this.

To answer your question, yes, if I _only_ have the main "create wireless network" airport connected/wired to the switch, everything works correctly.
OK, got that.
Also, if I have each of the 3 airports/timecapsule "create wireless network" using the same ssid name and passwd/protocol, everything works correctly (but of course, no roaming under this scenario
Sorry, you have me confused on this one. When the AirPorts are all configured to "create a wireless network", use the same SSID, security and password, and all AirPorts are in Bridge Mode........that is the exact definition of a "roaming" network.
Not sure what you mean when you say "no roaming" in this configuration.
Also, if I have the main "create wireless network" configured and have the 2 other airports "extend the network" and _not_ have them connected via the ethernet cable, everything works correctly (wireless airport interconnection)
That is correct.
However, if I plug the 2 other "extend the network" airports into the switch via ethernet, all connectivity shuts down.
This is not a correct setup. The "extend" setting on the AirPort assumes that they will connect using wireless. If you then try to connect an Ethernet cable to an AirPort that is expecting a wireless connection, that will result in a big feedback loop and effectively crash the network.

Selecting Airport Extreme crashes Finder, have to connect to it as a server

Similar Messages

Maybe you are looking for