Selecting all Automation data in a track.

I'm working on a complex mix and I want to select all automation data in a track.
I don't know the way. Can any guy to help me?

Thanx a lot Data Stream Studio!
Searching found this.
We can move all Volume automation data up or down, by holding pressed Alt key and Click-hold on first node. Then drag
up or down.

Similar Messages

Select all the dates between two txt fields. how?

In a 6i form cursor I need to select all the dates between two provided dates. I have two text fields FLD1 and FLd2 with date datatype. There is no table behind both the fields.
For example
:FLD1:='01-MAR-2013';
:FLD2:='10-MAR-2013';
Now I have to select all the dates from 01-mar-2013 to '10-mar-2013'. how to do it?

Gul wrote:
In a 6i form cursor I need to select all the dates between two provided dates. I have two text fields FLD1 and FLd2 with date datatype. There is no table behind both the fields.
For example
:FLD1:='01-MAR-2013';
:FLD2:='10-MAR-2013';
Now I have to select all the dates from 01-mar-2013 to '10-mar-2013'. how to do it?As'salamualikum Gul
Try this
SELECT TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum AS d
FROM ALL_OBJECTS
WHERE TO_DATE('01-MAR-2013', 'DD-MON-RRRR') - 1 + rownum BETWEEN TO_DATE('01-MAR-2013', 'DD-MON-RRRR') AND TO_DATE('10-MAR-2013', 'DD-MON-RRRR')Hope this helps

Is it possible to make all automation data quieter in one go?

I have a song with about 50 tracks on it and it have mixed it too loud. I'm happy with the the levels and the mix but just need to mix it at a quieter level.
However there is a substantial amount of volume automation many of the tracks. Is there anyway of reducing the whole thing or do I need to reduce each track individually and effectively re-mix the track?
Any help greatly appreciated.
Dave

dave,
I asked this question Sept.16.
Scroll down in this discussion
to a subject titled "Lowering Volume Globally".
There are a number of solutions.

HELP: move all automation - how?

Hi
Need a little help.
I've had to rework a track, including a load of structural changes. Somehow my automation preferences had changed, and no automation data has been moved with regions. As a result pretty much all my automation data (lots of it) is now 8 bars too early.
Please can somebody tell me how I can select ALL automation data for the whole song and move it all 8 bars later.
Many thanks in advance for any help.
Jules

Another thing you could do is open the automation event list like above, but then launch a new arrange window.
Your automation now shows up as regions in the arrange window which you can select all and drag.
I think you have to select 'do not move' when it asks you if you want to move the automation at this point, if you are moving the data to a later point in the song, or it moves it too far.
If you are moving the data to an earlier point in the song, you will have to cut the regions, and then move them. Cutting with the scissors seems to delete all the automation, but using a split at playhead type of operation works (?).
Sometimes this automation arrange window reverts to a regular arrange window, in which case you have to close the event list and reopen.

Moving and Copying/Pasting Track Automation Data

Hello,
I am a fan of using track automation data to control the volume levels on the faders of my Audio Instrument tracks. I am NOT using the track automation assigned to regions, I am using the ones assigned to tracks. If I move a region, however, the automation data (not surprisingly) does not move with the track. What is the easiest way to move automation data on a track? Is there a way to shift all automation data over a specified amount of measures etc?
Furthermore, I would like to copy ALL of the track automation on one track, and move it to another track (and keep the relative distance between all nodes, etc equal). How can I do this?
Thank you very much,
Connor
iMac G5 1.8Ghz 17" (ALS) Mac OS X (10.4.9) 2 GB RAM

I think you need to shift-drag select (rubber band select) the
automation stuff and when it's highlighted, hold option, click hold
drag and what you selected will be copied to the new location you
drag it to. You need to be pretty careful to option click hold
exactly on the automation line, if you miss it won't invoke the copy

Move automation data at same time in differenct tracks?

hi , anyone here can give me some sugesstion ?
I want to move the automation data in different track at same time but i cannot find how to make it .
I have 7 tracks all written automation volumn data , and now I want to move them all 3 db down in some bars, it seems that i must move the automation one by one ?
Thanks!

danseq wrote:
Unfortunately Logic doesn't yet have a trim or update mode, otherwise you could do it by using the group function on the fader channels, and using a fader movement.
What?! Really? My copy of Logic is on its way; I'm switching from SONAR and that's basically how I mix. Volume envelopes on tracks deal with automation along a track, then the track volume slider acts as an offset to those envelope-controlled volume changes, when it comes to mixing tracks together, and I realise that the whole vocal track, say, needs to be 3dB quieter just to start mixing...
So, how best to achieve this in Logic then? Do I have to route tracks to busses and mix from there? Essentially duplicating my tracks in bus-form seems like a bit of an unnecessary step! Any helpful suggestions will be welcome, but please don't flame me. I'm sure I'll be able to figure out a new workflow once I get my hands on Logic and start using it myself!

How do I copy automation data on multiple aux tracks?

Hi. Can anybody tell me how I can move/copy/paste automation data that exists on multiple Aux tracks at the same time as I move/copy/paste midi and audio regions?
Currently I can move/copy/paste multiple midi and audio regions at the same time, and if they also have automation data with them this also gets moved/copied/pasted, BUT its the automation data on Aux tracks which doesnt.
e.g. If I use 'Select Inside Locators' and then alt/drag the regions, Logic refuses to select the automation data on any of my Aux tracks too- so these get left out and I have to manually select each one and copy and paste it by hand which takes ages and is very fiddley.
Does anybody know how to do this?
Many thanks,
Al.

ctrl-cmd-E does not work? And cmd-1 doesn't work either?
Let's hope then that alt-K works, because that is where you can set keycommands. Any of the presets in the dropdown menu top left contains the commands you need.
I just did it myself, to check it; every keycommand preset there is, contains both combo's I've given.
I have no idea if there's a menu item for the Automation Event list, I guess there should be since there's no • in front of it (• before a command meaning it has no menu item), but I cannot find it, and I don't even know if it works using menu items. cmd-1 should work, always, but it's also under Window>Arrange.

Edit Automation data

Greetings Logic-o-philes,
Is there a way to move track automation data; volume for instance, created on several tracks, all at once?
Thank you,
Boe

Boe Brown wrote:
Is there a way to move track automation data; volume for instance, created on several tracks, all at once?
What you want to do is access Logic's Automation folder. For some typically stupid Apple reasoning, easy access to this folder was eliminated in version 7. But you can still get to it...
Open the Automation Event list. This is only accessable via a key command, so you may need to create one. Open your key commands window, and in the search field, type in "automation".
Find "Automation Event Edit", and assign a key command to it.
Once you open the Automation Event Edit list (via your new key command). With the Event list open, go up to the windows menu and open "Arrange".
A new Arrange page will open, but on this arrange page, you are looking at all your automation data, in the form of regions, just like you see with MIDI and audio regions, on the main arrange page.
Within this Automation arrange page, you can cut, move, drag, etc... automation data, just like you do with audio nad MIDI regions.
So if you need to copy, say, volume automation on tracks 6 , 7 and 8, from bars 1 through 16, to bars 30 through 46, simply select the automation regions on those tracks, and option/drag them to the proper location.
Tip... merge the automation regions per track, once they are copied.
You may also need to disable automation view, and then re-enable it, when you go back to your main arrange page, to visabliy see the changes.
Tip #2.... save this automation arrange page as a screenset. So from this day on, when you want to copy/move automation, you're a screenset away from it.

Clearing automation data

Is there a quick and easy way to remove all automation data from a session, including volume, pan, send automation, and anything else?
I can do a select all and delete all regions and notes, is there a way to do the same with automation?

In Logic, under Options on the top tool bar there is a Track Automation sub-menu. In that menu is a delete all automation command.
Hope that helps.
X

Copy/paste automation data in audio regions

Hi,
A dumb question but I'm having trouble figuring out...how do I copy and paste automation data in audio regions? When I copy and paste an audio region I like, it pastes down the selected region but without the automation data with it. I've been rewriting the automation data every time to the newly-pasted region but I'm sure there's a simple way to do this. I've looked through the various help files but still am struggling to find the procedure. Any advice is welcome and thank you.
Respectfully,
John
Logic Express 7
OS X 10.4.8

OK, for viewers of this topic I figured this out myself. There are two lines in the reference manual that pertain but even they were a little confusing. They read:
"Option - long clicking on a selection allows you to copy the selection." p.234
I had success by using the pointer tool and selecting the automation data within the region by holding shift+dragging the mouse over the target data. The data highlights white. Then with the pointer tip on a line of the selected data, holding option+long clicking the selection AND dragging the data while still holding the option key I was able to drag and drop the automation data to a new region in the track. That got me "in the ball park" so to speak but fine tuning the actual drop was necessary to assure precise nodal location. That can be done node by node or better by dragging the entire automation selection as a loop edit.

Selecting all columns makes oracle use more indexes than only selectng one?

I have 3 queries here that differ only slightly, conceptually, but the plans are massively different. What I cant work out is that the difference is only in the select list.. The fields referenced in the where clause are properly indexed for this purpose
SELECT
scc.expiry_date
FROM
bw3.int_file_log_details ifld
INNER JOIN
bw3.svc_card_status_change scsc
USING
    (institution_number, file_number)
INNER JOIN bw3.svc_client_cards scc
USING
    (card_number)
WHERE
institution_number = '00000001' AND
file_number = '00002504'This one above does a full table scan of SCC, over 3.5 million records
SELECT
card_number
FROM
bw3.int_file_log_details ifld
INNER JOIN
bw3.svc_card_status_change scsc
USING
    (institution_number, file_number)
INNER JOIN bw3.svc_client_cards scc
USING
    (card_number)
WHERE
institution_number = '00000001' AND
file_number = '00002504'This one above does an index fast full scan of SCC's pk (which is cardnumber), as does doing a "SELECT null as dummy FROM..."
SELECT
FROM
bw3.int_file_log_details ifld
INNER JOIN
bw3.svc_card_status_change scsc
USING
    (institution_number, file_number)
INNER JOIN bw3.svc_client_cards scc
USING
    (card_number)
WHERE
institution_number = '00000001' AND
file_number = '00002504'This one above does the index range scan of the columns mentioned in the where clause and two index unique scans to link in IFLD and SCC (because they are joined on their PKs)
I would expect all queries to run this way and completes in ~0.01 seconds
Now, I get that oracle will sometimes use only an index instead of a table access when the requested data can be got from the index, but the actual query is pulling data from some columns not in indexes, so must be accessed in the table:
SELECT
scsc.card_prod_data as "Field1",
substr(card_number,1,4)||' '||
    substr(card_number,5,4)||' '||
    substr(card_number,9,4)||' '||
    substr(card_number,13,4)||' '||
    substr(card_number,17) as "Field2",
'                           ' as "Field3",
scc.emboss_line_1 as "Field4",
scc.emboss_line_2 as "Field5",
TO_CHAR(TO_DATE(scc.last_issued_date, 'YYYYMMDD'), 'MM/YY ')||
    TO_CHAR(TO_DATE(scc.expiry_date, 'YYYYMMDD'), 'MM/YY ')||
    '    ' as "Field6",
'B'||
    card_number||
    '^'||
    RPAD('0', 27, ' ')||
    '^'||
    to_char(to_date(scc.expiry_date, 'YYYYMMDD'), 'YYMM')||
    service_category_code||
    '000000000000' as "Field7",
card_number||
    '='||
    to_char(to_date(scc.expiry_date, 'YYYYMMDD'), 'YYMM')||
    service_category_code||
    '000000000000' as "Field8",
card_number as "Field9",
scsc.cvv_cvc2 as "Field10"
FROM
bw3.int_file_log_details ifld
INNER JOIN
bw3.svc_card_status_change scsc
USING
    (institution_number, file_number)
INNER JOIN bw3.svc_client_cards scc
USING
    (card_number)
WHERE
institution_number = '00000001' AND
file_number = '00002504'This query above, which uses some data from all tables, does a table full scan of SCC, yet if I SELECT * FROM.. I get the expected index usage and table access by index rowid for all tables..
Why is oracle doing an FTS when I choose only some columns, yet doing index access when I select * ?
Edited by: charred on Oct 5, 2010 11:37 AM

Selectivity of indexes?
For a query linking these tables:
int_file_log_details <-> svc_card_status_change <-> svc_client_cards
I'm expecting Oracle to:
Use an index range scan of the index on svc_card_status_change that is a nonunique index of institution_number and file number. Selectivity of this index is:
1 institution number in the entire table
59 distinct file numbers in the entire table
4.1million records in the entire table
From there, with the records it found, to use index unique scan of the PKs of int_file_log_details (file_number: 1 record required) and PK of svc_client_cards (card_number: poetntially thousands of records required)
I can understand if oracle might decide it can get 69k records out of 4.1 million faster by FTS the cards table rather than having the indirection of the index... what I cannot understand is:
If I select all the data from the query (SELECT *) it does unique index scans for the 2 records
If I select say, only one non-indexed non-joined column from each table, oracle prefers a FTS of the cards table..
Is oracle not realising that there are only 2 records I need out of cards? Why would select * differ? Is it that oracle thinks "select * is a large amount of data, so it'll be faster to use the index and target certain rows" vs "select one_column can be garnered more quickly by scanning the table and generating a lower overall memory load" ?

"Move Current Track Automation Data to Region" doesn't work for all

I have been using the 'Move Current Track Automation Data to Region' and while it works fine for some types of automation data like channel volume, pan and some plugin parameters, it doesn't work for all of them.
I haven't done exhaustive research into which parameters work and which don't, but most of the parameters for individual voices within Ultrabeat don't - which is annoying as that is what I was trying to use it for.
Any ideas about this, or workarounds?

OK, well an update on this in case anyone's interested.
With some further experimentation I have discovered that this problem did not exist in Logic 7 - ie you can move current track automation data for individual Ultrabeat voices to the region.
It's also possible to move automation data for individual Ultrabeat voices using 'Move All Track Automation Data to Region,' so I suppose this is a kind of workaround, though it can be annoying if you don't want to move all track automation data.
I'm now assuming this is a bug in Logic 8; is there any way to convert a Logic 8 project to work in Logic 7, as this along with the touch tracks bug is making working in Logic 8 very frustrating?

Automation data copied to another track?

I like the way I automated a track, and want to used that exact "volume" automation on the next track below in my arrange menu. Is there a way to copy/paste kind of process here to recreate this on another track?

Prior to Logic 7, Logic included an Automation Folder. This was basically an arrange page, that had all the automation in your song viewed as if they were audio or MIDI regions. You could easily option/drag automation from one track to another this way.
There is a way to it in version 7... read about it here:
http://community.sonikmatter.com/forums/lofiversion/index.php/t21249.html
I have my automation folder available as a screenset.
Once set up, this is probably the quickest way to achieve what you're wanting. However, I have also used the method mentioned above, where you drag the region, and Logic asks if you want to copy it (as long as you have "Ask" selected in your Track Automation Preferences).
Then just delete the copied region, and tell Logic not to delete the automation data.
Do look into the automation folder though. It allows you to move and copy automation data, just like you do audio and MIDI regions.

Selecting all data from employee where foreign key = null and show it in view

Hi guys i have view like following :
SELECT dbo.Nationality.NationalityName, dbo.Employee.DriverName, dbo.Employee.DriverID, dbo.Employee.NationalityID, dbo.Employee.ResidentNo,
dbo.Country.CountryName, dbo.Employee.CountryID, dbo.Branch.BranchName, dbo.Employee.BranchID, dbo.Employee.JoinDate,
dbo.Employee.ResignDate, dbo.Employee.HealthCarNo, dbo.Employee.JobID, dbo.Jobs.JobName, dbo.Department.DepartmentName,
dbo.Jobs.DepartmentID, dbo.Employee.PlaceIssue, dbo.Employee.Deduction, dbo.Employee.ExpireDateMedical, dbo.Employee.PolicyNumber,
dbo.Employee.Owner, dbo.Employee.Version, dbo.Employee.ExpireDateResident, dbo.Employee.Salary, dbo.Employee.SexID, dbo.Sex.SexType,
dbo.Sex.FlagSex, dbo.Employee.MiritialID, dbo.Miritial.MiritualStatus, dbo.Status.StatusType, dbo.Employee.StatusID, dbo.Employee.UnactiveReason,
dbo.Employee.BirthDate, dbo.Employee.DateToday, dbo.Employee.UserID, dbo.Employee.PassportNo, dbo.Employee.Period,
dbo.Employee.AccountNo, dbo.Employee.Bonus, dbo.Employee.AccountType, dbo.Employee.PlaceOfBirth, dbo.Employee.EmplyeeName,
dbo.Employee.ExpireDateresidentHijri, dbo.Employee.PassportDateStart, dbo.Employee.PassportDateExpire, dbo.Religon.ReligonName,
dbo.Employee.ReligonID
FROM dbo.Nationality INNER JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID INNER JOIN
dbo.Country ON dbo.Employee.CountryID = dbo.Country.CountryID INNER JOIN
dbo.Branch ON dbo.Employee.BranchID = dbo.Branch.BranchID INNER JOIN
dbo.Jobs ON dbo.Employee.JobID = dbo.Jobs.JobID INNER JOIN
dbo.Department ON dbo.Jobs.DepartmentID = dbo.Department.DepartmentID INNER JOIN
dbo.Sex ON dbo.Employee.SexID = dbo.Sex.SexID INNER JOIN
dbo.Miritial ON dbo.Employee.MiritialID = dbo.Miritial.MiritialID INNER JOIN
dbo.Status ON dbo.Employee.StatusID = dbo.Status.StatusID INNER JOIN
dbo.Religon ON dbo.Employee.ReligonID = dbo.Religon.ReligonID
suppose i need to show all data from Employee table (NationalityName,BranchName,JobName) where
NationalityID =NULL OR BranchID=NULL OR JobID=NULL
WHAT I DO
Notes : I mean in topic(selecting all data from view not table
meaning i need to show all data in employee table by view
in case of forign key(any forign key)equal null

I think you need to change
FROM dbo.Nationality INNER JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID
to
FROM dbo.Nationality
LEFT JOIN
dbo.Employee ON dbo.Nationality.NationalityID = dbo.Employee.NationalityID
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

TS3988 I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD

I am not able to open the settings icon from my old iPAD. When I try to select the settings icon it looks like it's about to launch and open however; it will not stay open. I am trying to transfer all my data from my old iPAD to my new 4th gen iPAD.

Try a soft reset - press the home and power bottons and keep them pressed until the Apple logo comes on. Then see if you can access Settings.

Selecting all Automation data in a track.

Similar Messages

Maybe you are looking for