Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

Hi,
I am using SCOM 2012 SP1
I have recently been experiencing an issue when trying to create a new dashboard using the wizard. I get to the step where you select a group or object to add to the Scope and Counters section. When I try to search for a particular object such as a
port or interface it times out and returns an error. The error is shown below:
Please provide the following information to the support engineer if you have to contact Microsoft Help and Support :
Microsoft.EnterpriseManagement.Presentation.DataAccess.DataAccessDataNotFoundException: Exception reading objects ---> Microsoft.EnterpriseManagement.Common.UnknownDatabaseException: The query processor ran out of internal resources and could not
produce a query plan. This is a rare event and only expected for extremely complex queries or queries that reference a very large number of tables or partitions. Please simplify the query. If you believe you have received this message in error, contact Customer
Support Services for more information.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.EntityObjectsServiceProxy.GetManagedEntitiesByManagedEntityTypesAndCriteriaWithInstanceQueryOptions(IList`1 managedEntityTypeIds, IList`1 managedEntityBaseTypeIds, IList`1 criterias, String
languageCode, InstanceQueryOptions instanceQueryOptions)
   at Microsoft.EnterpriseManagement.InstancesManagement.GetObjectsReaderInternal[T](ICollection`1 criteriaCollection, ObjectQueryOptions queryOptions)
   at Microsoft.EnterpriseManagement.Management.DataProviders.ManagedEntityProvider.GetManagedEntitiesByClass(ICollection`1 baseTypeNames, String criteriaString, List`1 valueDefinitions, List`1 sortValueDefinitions, Int32 maxEntities, String typePropertyName,
String typeWithIconPropertyName, Boolean propertyCollectionRequested)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethodInvoker.Invoke()
   at Microsoft.EnterpriseManagement.Monitoring.DataProviders.RetryCommandExecutionStrategy.Invoke(IDataProviderCommandMethodInvoker invoker)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.DataProviderCommandMethod.Invoke(CoreDataGateway gateWay, DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.ExecuteInternal[TResult](DataCommand command)
   at Microsoft.EnterpriseManagement.Presentation.DataAccess.CoreDataGateway.<ExecuteAsync>b__0[TResult](<>f__AnonymousType0`1 data)
It appears to be complaining about internal resources, but we have not experienced this issue before and both the management and SQL servers have plenty of resource. The databases are held on a seperate dedicated sql server and I have noticed that when I
try to search for the object, the sqlservr.exe process immediately consumes 50% CPU while the query is running. As soon as it ends (errors) the sqlservr process drops back to a reasonable number.
No changes have been made to either the management server or sql server. We were able to create dashboards one day, but then recieved this error the next.
Has anyone else seen this issue? or can anyone explain what is happening?
Many thanks

Hi,
Asposted earlier,hadt he same problem
when creating a Dashboard widget type
State.
Ones olution I found for this was as follows:
When creating the State widget,the option
to specify the criterion I left blank
and finished the creation of the dashboard.
With that managed to solve the problem.Of course this
is not the solution, or the root cause
of the problem.
I will examine more about this issue, and sohave
the ultimate solution and why such behavior,I post
here.
thank you
Wilsterman Fernandes

Similar Messages

Yesterday I changed my email password on my home computer. Today, I can't get any new emails on my Samsung Galaxy 4; I deleted the email account entirely and tried to set it up again as a new account, using the new password, but it keeps giving me an err

Yesterday I changed my email password on my home computer. Today, I can't get any new emails on my Samsung Galaxy 4; I deleted the email account entirely and tried to set it up again as a new account, using the new password, but it keeps giving me an error message that reads: Cannot safely connect to server. The new password is working on my home computer. I even tried the old password; it just gave me the same error message.

I'm sorry you're having issues with your e-mail account on your phone Rusty1112. Let's figure out what's going on. First, please try deleting account/information again and then restart phone. When phone is back on, try adding e-mail account again, and be sure you're entering exactly as you set up, meaning its case-sensitive. If you're still getting same error, please let us know and let us know what e-mail account it is, Yahoo, AOL, MSN, etc.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

When creating events my calendar has the GMT default and I've done everything to fix it. I need help. It's driving me crazy.a

Time Zone issue in the calendar.

ChurchGurl,
I had the same problem on my newly acquired iPhone 6 as well as my slightly older iPad Mini (2), but the problem did not start until after I set up my iPhone 6 recently. The link (iOS: Troubleshooting issues with date and time - Apple Support) in Jason's response above is good advice and should fix the problem, but then your phone will not automatically adjust time zones if you go from one time zone to another. That may not be a problem much, or at all depending on how much you travel. Something else I noticed is that you are specifically referring to using the Calendar App. Be sure to check Settings > Mail, Contacts, Calendars > Time Zone Override (near the bottom under the "Calendars" section). If Time Zone Override is turned off, "events will display according to the time zone of your current location." I don't know for sure if the "location" it's talking about is determined by the "Time & Date" settings mentioned in Jason's response or some other calculation (GPS, Cell Signal, etc.). I'm thinking that if you turn off the feature to automatically set your time zone, it may affect your calendar as well.
Possible Alternative Solution...
My iPhone and iPad calenders sync with my Google Calendar, so this may be a whole different circumstance, although I encountered the same problem you're having where any appointments I created on my iPhone 6 (and suddenly on my iPad Mini as well, which created events properly before) listed the GMT Time Zone instead of my own. I checked the settings mentioned above, and checked the Calendar Time Zone settings directly in my Google account and all was correct... except for the iOS Time Zone issue displayed on the iOS Calendar. So, I created a new event in the iOS Calendar, and when I set the time for the event I made sure to change the Time Zone setting to my current/correct Time Zone, and then hit Done. After doing this a couple of times and changing/correcting the Time Zone each time I created the new appointment, it now uses the correct Time Zone for new events on both my iPhone 6 and on the iPad Mini as well, as if it synchronized the two back to the correct Calendar Time Zone settings. I suspect it had something to do with the fact that I set up a new iPhone on my account recently, but I don't know for sure. One question for you is whether you set up, restored, or added any new iOS devices to your account recently. It may or may not make a difference, but it's worth checking into. Good luck!

Migration of balances for new ledger using the New GL

Hi everyone,
I have a specific scenario into this customer where we have implemented the SAP version ECC6.0 with the table FAGLFLEXT is active and using just one ledger (0L - standard). We need to create a new ledger for IFRS (e.g: 1L), as the customer didn´t use the splitting document functionality, it was not purchased the migration services.
Now I need to upload the balances in the accounts into new ledger, I understand that for general accounts there is no problem because I can use the transaction FB01L and specifying the new ledger (1L).
My doubt is : How can I to do the upload balances for open items into the AP and AR accounts?
Anybody can help me?
Thanks
Ricardo Gomes

You are right. I just realized that and came back to update my response. Please see the following note.
https://service.sap.com/sap/support/notes/1070629
I see a standard program delivered for that purpose in the note above.
FAGL_MIG_SUBSEQ_POST
Again, please go through the note. There is a lot of information on data transfer (and other FAQs) for new non-leading ledgers.

When I open iTunes on my new computer using the .itl file, and using the same external drive holding the songs, all of the songs I added to iTunes up to a certain date have broken links, while none of the songs have broken links on the old computer.

I want to open the iTunes library on my new laptop with all the playlists and stuff I built on the old computer. I have all my music on an external drive. I have copied the .itl file from the old computer and opened it on the laptop, and it has all the playlists, but all of the songs that were added to iTunes up to a certain date have broken links. What am I doing wrong?

Moving library files around while leaving the data in the same place usually presents no problems. Moving the data around independently from the library usually breaks things. With Windows machines all you should need to do is make sure that the same drive letter is being used on the new system as with the old. If that is not possible you need to get your library into a portable layout before moving it between systems.
Typical layout of iTunes folders:
When the media folder is inside the main iTunes folder as shown above then the library is portable. Typically with a split library the iTunes Music or iTunes Media folder (everything inside the red outline) is moved to a different drive by choosing a new locaton for it and then consolidating.
To make the library portable again you need to copy the library files and album artwork folder into the parent folder of the media folder so that the nested relationship is recreated. (BTW If your media isn't already inside your designated media folder then you will also need to consolidate the files that are outside of it, before you copy the library files.) You can then use the hold-down-shift-when-starting-iTunes method to open the library file in that parent folder. Once the library has been opened, tested and closed you are most of the way there.
The iTunes window inherits its title from the folder holding the library files so, unless you created a folder called iTunes to hold the media folder, iTunes may now have an unexpected title when you run it. The parent folder can be renamed as iTunes, and the library opened again. Alternatively, if the parent folder is at the root of the drive, or has other data which you wish to leave in place, you can create a new top level folder called iTunes and move the library files, album artwork and media folders into it before opening and testing the library again.
If the library doesn't work after any step simply reverse it by undoing a move or rename or opening the previous set iTunes Library.itl file.
If all has gone well then the library is now portable. Once you've migrated the data to a new system you can copy the library files back to their usual internal location if you find that having them on the external drive affects performance...
tt2

Am unable to click and open new tabs using the new tab button after downloading the newest version of firefox?

have recently downloaded the newest version of firefox. after installing i am happy to say i am pleased with the new look and features etc though for some reason i am unable to open new tabs as before.
i now have to right click on bookmarks or favorites and select open in a new tab to do so, rather than simply clicking on the new tab button..

If the problem turns out to be the "New Tabs at the End" extension, there actually is an internal setting for this that you could use instead.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false. That's it.

Why can I not open a new tab using the New Tab button, going to File and clicking on New Tab or by pressing ctrl + T?

I am able to right click on a link and choose "Open in a New Tab."

This issue can be caused by the Ask<i></i>.com toolbar (Tools > Add-ons > Extensions)
Your system details show that toolbar in the user agent as AskTbGLSV5/3.12.2.16749
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

When to use the new file based content repository

In Service Pack 4 there's a new implementation of the CMSPI interfaces which is configured by using the following implementation class:
com.bea.content.spi.internal.FileSystemRepositoryImpl
When should one use this new file based repository versus the existing one (configured by using the following class: com.bea.content.spi.internal.RepositoryImpl).
I've read the edocs, but it doesn't state when to use this new one compared to the previous implementation.
We consider using a third party content repository, but for the time being we will use the content repository provided by BEA.
Trond Andersen, Invenia AS, +4798290811

use the new keyword when you don't have an instance of that object in memory that you want to use. For example...
if you have an object already in memory that is holding a property with a "CamelQuery" object, then you can say
var query = myobject.Query;
however, if you have to write the query, or instantiate the object from nothing, then you need to use the "new" keyword. A good example is SPSite object...
if you can get a new SPSite object by either "newing one up and passing the URL" or getting the farm and getting a site from that object.
using(SPSite site = new SPSite("url to my site"))
now I can use site.
//or
SPSite = myWebApp.Sites[0];
// this gives you site at index 0 of current webApp
most of the time in SharePOint you will be using the "new" keyword to open site collections, and then getting your subsites from there. BE CAREFUL using the "new" keyword. If you "new" up an object that is iDisposable... you
MUST dispose of that, but if you use that same object but it comes from the "current context", you mustn't dispose of it.
//dispose of this by using statement
using(SPSite site = new SPSite(<url>))
//do stuff
//after this bracket it is disposed.
//do not dispose of this:
SPSite mysite = SPContext.Current.Site;
//unpredictable behavior can occur because you will still need references to your current site.

How to create a listener using the new MDM API

Does anyone have an example on how to create a addrecord listener using the new MDM API?

Refresh!
Hi all,
Looking for some sample codes on the same
Best regards,
Arun prabhu S

Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901

Hi Everyone,
I have a program that sends information(analog output) to lab windows cvi in the form of a text file or user input.
The program runs on the computers that I have the field point explorer and lab windows cvi installed on. In order to run the program without always installing labwindows/cvi and field point; I wanted to create an executable file that could be load on another computer.
I used the create distribution kit part of labwindows/cvi to do this.After creating the distribution kit, I then installed it
to another computer.
My user interface appears on the screen, when the user clicks on the exe. file, but no data is sent to the field point module. I know that the data is being read from the user and textfile because in it appears in the uir.
The following are some details about the problem:
1. On another computer without labwindows/cvi and field point explorer not installed - no data is sent to field point module
I know this because a current is being read on the current meter connected to field point module.
My questions are the following:
1. What are the possible reasons for the data not being sent to the field point module?
2. Do I still need to create an iak. (Installing Field point Explorer) file stored on any new computer that I install my created distribution kit file too?
Thankyou very much for any help that you can provide. I greatly appreciate it.
Faen9901

Re: Hello, I have created a distribution kit for my program.The problem is that the when the program is installed onto another computer, it fails to communicate with field point (Using FP-AO-200 and FP-AO-1000). Help is greatly appreciated, Thanks faen9901Faen9901,
1) If you do not install FieldPoint Explorer, the FieldPoint Server is not installed so there is nothing on the target computer that knows how to talk to the FieldPoint system.
2) Yes, you need an IAK file on the target computer. Assuming the settings (i.e. com port#) are identical you can simply include the iak file as part of the distribution.
3) You also need to include as part of your installer the file "fplwmgr.dll". If this file is not installed, your program will not be able to access the FieldPoint Server. Alternatively, this file is installed automatically if FieldPoint Explorer detects LabWindows/CVI or Measurement Studio Development versions on the target computer or if you choose to do a custom FieldPoint Explorer installation and
choose to provide LabWindows/CVI support.
Regards,
Aaron

HT2433 I purchased an external CD drive because the internal one died. When I try using the new drive I get the following msg "The attempt to burn a disc failed. The device is not accessable, probably because it was removed"

I purchased an external CD drive for my MacBook,the internaldrive had died. When I tried using the new drive I got the following msg "The attempt to burn a disc failed. The device is not accessable, probably because it was removed" I contacted OWC and tried to work the issue with them, we gave up and OWC sent me a replacement. I connected the replacement and am getting the same message. Any thoughts?

Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

The problem is with the new operating system and sending photo via email when used in my iPad. From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow.

The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Can't select "include book documents" when creating index in InDesign CC

I'm trying to make an index for several dokuments in a book. I've made the index but when I try to generate the index the checkbox is greyed out so I can't check it. Do You know what's wrong?

Thank You. That worked well.
One more question: It looks as if the index does not include the words of all the documents in the book. Is it something I do wrong?
Thanks
Henning
Fra: Peter Spier <[email protected]<mailto:[email protected]>>
Svar til: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Dato: onsdag 10. juli 2013 13:04
Til: Henning Kristoffersen <[email protected]<mailto:[email protected]>>
Emne: Can't select "include book documents" when creating index in InDesign CC
Re: Can't select "include book documents" when creating index in InDesign CC
created by Peter Spier<http://forums.adobe.com/people/P+Spier> in InDesign - View the full discussion<http://forums.adobe.com/message/5491834#5491834

Install OBIEE Failed When Creating Domain

Hi all,
I tried to install OBIEE on 64bit redhat linux, but failed when creating domain, the error log shows:
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An internal WLST operation has failed.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3126)
     ... 19 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 14 more
the following steps(steps after creating domain) raised:
Caused by: java.net.ConnectException: t3://hostname:7001: Destination unreachable; nested exception is:
    java.net.ConnectException: Connection refused; No available router to destination
It's unlikely a hosts file issue which I've met before.
Install OBIEE Failed on Linux 64bit
the log caused by hosts file shows:
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
BTW, the port was tested to be available.
any idea?
thanks in advance
Nathaniel

we had this issue couple of days back ,,
Resolved by doing below
1. uninstall obiee 2. drop the repository 3, remount /tmp folder
with this we could successfully install obiee 11.1.1.7

I changed email address and had to delete my account and create a new one with the new email address. When I did this i lost all of the information in my calendar. How can I recover this vital information?

My email address changed and I had to delete my account and create a new one with the new address. After I did this all of the data in my iPhone calendar is gone. How can I recover this vital data?

It is my understanding that if you delete the account per the instructions below, you will be able recreate, but you will NOT have access to the prior BBM contacts.
Read this for full information and suggestions to regain access to your BBID >> http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
You have to remember either the BlackBerryID password, or the secret question answer. Without either, you're stuck.
Your choices are:
--Use another email account to create an entirely new BlackBerryID (with which you will lose access to any purchased apps using the "forgotten" first BlackBerryID, or
--Find the initial email you were sent to confirm the initial BlackBerryID, and in it is a link to click to cancel and delete the account. Click on that, delete the account and then you can use that same email to create an entirely new account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Selecting an object fails when creating a new dashboard using the 'New Dashboard and Widget Wizard'

Similar Messages

Maybe you are looking for