Selecting and Deselecting Images in Aperture

Is there anyway to select images in Aperture and keep them selected until you deselect them? For example if I close Aperture I would like to be able to comeback and the images are still selected.

No, Aperture won't remember your selection after quitting.
You can get around this by creating a new album from selection, or a assigning a temporary keyword 'selected' which you can then filter for when relaunching aperture to select the same images again.

Similar Messages

  • I'm using LR5 and have recently had a problem with selecting and deselecting images.  When I click on an image, the adjacent image also gets selected.

    To expand on the problem, I've tried importing a different catalog and I get the same problem so I think the issue is in the application.  Also I've tried using different mice and get the same result.  Do you think I need to uninstall LR and reinstall it?

    First, try rebooting your computer.
    Second, exit Lightroom and delete the LR preferences: Preference and other file locations in Lightroom 5.  On Mac, reboot after deleting.  Sprinkling that magic fairy dust often fixes weirdness in the LR user interface.

  • JList Select and Deselect

    well, i set my JList to be multiple selection mode,
    say i made two selection on my jlist
    and how could i deselect of them !
    thx in advance!
    Sam

    You can use CTRL+click with your mouse in the interface to select and deselect things in multi-mode.
    If you want to select/deselect things from inside your code, try using the setSelectedIndices(int[] indices) method which you can find in JList. It should remove whatever selections were made and instead select those items that you specified in the array.

  • Applet select and deselect by JCRE

    Hi,
    I wonder why, in term of technical design, applet should have "select" and "deselect" method. This implies that the applet can select/ deselect by its self. (invoking these methods inside another method)
    However, the JCRE is the one who perform applet selection. Therefore, the right location to define select and deselect should be in the JCRE implementation.
    Do you have the same idea or there are advantages by defining select, deselect in each applet to be considered?
    thanks,
    Hoang Long

    Some secure Java Card platforms check that the caller's context is the JCRE, hence making the (de)select() un-invokable by anything else than the JCRE.
    You shouldn't do anything critical in the deselect() method, as you have no guarantee that it will be invoked, in particular when a power loss occurs.
    For more information, you should read the JCRE specification, there are some chapters on process()/select()/deselect() methods.

  • Problem selecting and deselecting photos

    My mind is confused.  Last night I was carefully selecting photos from about 900 in the browse view.  I held down the command key continually and then left clicked one image I wanted after another.  Sometimes after chosing 45 images, sometimes after only 10, Aperture 3 would on its own start all over.  The count at the bottom of the view would reset to 1.  All the images I had just selected were deselected.  I did this seveal times, always being very careful to click only in the images and no where else.  The thumbnails were large, so accuracy was not an issue.  I would scroll down using the wheel, always holding down the command key.  It seemed to have a mind of its own.  i'm well familiar with the Finder interface, so it wasn't me being clunky.  I repeated this behavior a number of times...baffling behavior.  Besides Aperture 3 being beastly slow on my imac, this was extremely irritating and buggy.  Am I the only one who has experienced?  What say you Apple?  Thank you collective.

    Thanks Mark, but you answered what I already included within my question. I wrote "So it's that, or disabling the hyperlink, move the object normally, and putting the hyperlink on again"
    With that, to "Uncheck the "Make hyperlinks active" you need to first select the object, and you end up back to the first and second problem I wrote.

  • AA6 - Move To Beginning/Ending Of A Selection And Deselect

    Hello...
    In AA3- you could make a selection, then click at the beginning/ending of the selection.  It would deselect the selection and move the play head to that position.
    In AA5.5 you had to use the left/right arrows to do the same task.
    In AA6, neither work.  If you left/right arrow, the play head moves but it moves down/up the timeline (not to the beginning/ending) and it doesn't deselect.  Ctrl+left/right arrow does move the play head to the appropriate places (as well as other places) but it doesn't deselect.
    Is there a way to do this with AA6?
    I used it a lot when doing track breaks for cd (home, shift+click at 5:00, f8, right arrow, shift+click at 10:00, f8, etc...).  I also used it where I wanted to have only 0.5 seconds of extra silence at the beginning/ending of some audio (click at the beginning of the audio, drag backwards 0.5 seconds, left arrow, shift+home, delete).
    JJ

    Since you're doing this for CD, I think I have a method that would be faster for you.
    1. Home, Shift+M (This sets the playhead to the start and places a CD Track Marker at the playhead).
    2. Click where you want this track to end and the next to start and again press Shift+M.
    3. Continue placing single point CD Track Markers at each location where you want the last track to end and the new one to start (including adding one to the very end).
    4. When all markers have been added, open the Markers Panel and select all the markers.
    5. Press the icon in the Markers Panel for "Merge selected markers".
    Now if you want to burn the CD, just go to "File > Export > Burn Audio to CD..." and we will burn a CD with track markers where you hae defined them.
    --Ron

  • Selecting and deselecting desktop background images

    Can I select which Apple photos to use when setting desktop background to Change Picture? Put another way, can I deselect pictures I don't want to see? I hoped the "-" box at the bottom of the list would let me deselect folders or even specific images within folders, but it doesn't. I would like to have only the nature pictures in the Change Picture rotation.

    You would have to create your own folder or album with select photos for this type control.
    Use the + sign to add your album.

  • Need to select and move images across multiple pages...

    Hi,
    I am using Indesign CS2 on a Windows machine and have a 25 page document with 4-up photos (4"X6") on individual pages. I used the ImageCatalog javascript to load these images so I don't seem to have any control from the Master page. I would like to group and move these images to a different location on their own pages.
    Do you know how to select these images across multiple pages? Or can a simple script be written to process this task?
    Thanks in advance for your help.
    -Greg

    Hi Greg,
    A script can certainly do what you want to do--but you have to be a bit more specific. Do you want to move them to different pages in some predefined way, or do you just want to adjust them a bit on the pages they're already on?
    Thanks,
    Ole

  • Working with RAW and JPEG Images in Aperture (2 part question)

    I just edited a RAW file and stamped the adjustments into the JPEG file. Then applied some RAW fine tuning to the RAW image. For the life of me I cannot tell the difference between the two images and I will not blow up beyond 8 x 10. So is shooting RAW a waste?
    Secondly do JPEG degrade every time you open and close them or only if you open them, edit them and then close?
    Thanks

    Working on JPGs in Aperture does not degrade JPGs at all because the original JPGs are not ever re-saved, and therefore are not ever re-compressed.
    As for shooting RAW vs. JPG - I usually shoot both at the same time using RAW+JPG, I have never ever been in a position where I shot RAW and wished I had shot JPG. I have been in positions where I shot JPG that I wish I had shot RAW.
    [Why shoot RAW|http://photo.rwboyer.com/2009/01/why-shoot-raw>
    RB

  • How do I select and delete images in Numbers?

    Hi,
    I need to delete some images in a previous saved numbers spreadsheet.
    I cannot select any image individually, if I click on one cell all images are un-selected automatically.
    After pressing ESC and then Cmd+A I'm able to select all images in the spreadsheet but I don´t know
    how can I select an image and delete it?
    This simple process is getting really frustrating.
    Any help/hint is welcome!
    Thanks in advance.

    If you pasted the image into a cell.  select the cell, then open the cell formatter.  Change the cell background fill to "No Fill":

  • Question concerning Selecting and Deselecting Toggle Buttons

    Hello Everyone,
    I am still relatively new to the adobe web suite (still in the trial period in fact). I am working on creating a mock-up of a main web page design to demonstrate and discuss with management. The decision associated with such would determine if we go forward with purchasing adobe products, continuing a redesign of our website among many other things.
    The big issue that I am running into at the moment is creating a series of interactive thumbnails.
    I have the following set up on the page:
    - A section for the actual image (full sized) complete with a title and description provided at the side for one of potentially many topics.
    - Below the topic/image section is a series of thumbnails, which the first one is set for full opacity and marked as selected. (All of these thumbnails are in a Custom Component and break down into a Toggle Button component each, if the image is unselected it remains set at a low opacity)
    - When selecting one of the other thumbnails, I need it to change the image (this part works), select/set the thumbnail to full opacity (this part works as well, given it is a toggle button feature), and lastly unselect the previous thumbnail (causing it to go to a lower opacity, I cannot figure out a way to accomplish this one)
    - In the future I intend to design side bars (left and right) for both thumbnails and the section above (effectively changing the topic to a new one)
    The ultimate idea is to create articles, provided with thumbnails associated to the article at the bottom and to allow clean alternation between the thumbnails, and likewise be able to switch to a new article (with a new set of thumbnails associated to the new article) as well.
    Any help would be greatly appreciated.
    -Steven

    I think I found the solution of my own question. I share it in the hope that it’ll be useful to other people. Remind that I use Cp 6.1.0.319. I modified the project as follows: 1) I unchecked “Visible in output” for the button “Audio Play” (Bt_play) 2) I  modified the AA associated to the audio on/off buttons as descrived below: Action Name: Play Assign cpCmndMute with 0 Show Bt_Stop Enable Bt_Stop Hide Bt_Play Disable    Bt_Play Action Name: Stop Assign cpCmndMute with 1 Show Bt_Play  Enable Bt_Play  Hide Bt_Stop Disable Bt_Stop In this way the two buttons in the same location work well as a real toggle button! Greetings Elena

  • Select and deselect all in ALV

    Hi,
    I have created an ALV that has a Check box as the first field as the first field of the row.
    Now when I press SELECT ALL nothing gets selected.How can i correct it,
    Thnx in advance

    Hi chirantan,
    1. To get a taste of it,
       just copy paste this program.
    2. It will display alv (t001)
      and DOUBLE-CLICK ON any row.
       It will TICK ALL THE CHECKBOXES.
    (Instead of double-click, u can check for the user-command
    of select all button )
    3.
    REPORT abc.
    TYPE-POOLS : slis.
    Data
    DATA : BEGIN OF itab OCCURS 0.
            INCLUDE STRUCTURE t001.
    DATA : flag tyPE c,
           END OF itab.
    DATA : alvfc TYPE slis_t_fieldcat_alv.
    DATA : alvly TYPE slis_layout_alv.
    Select Data
    SELECT * FROM t001 INTO TABLE itab.
    *------- Field Catalogue
    CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
      EXPORTING
        i_program_name         = sy-repid
        i_internal_tabname     = 'ITAB'
        i_inclname             = sy-repid
      CHANGING
        ct_fieldcat            = alvfc
      EXCEPTIONS
        inconsistent_interface = 1
        program_error          = 2
        OTHERS                 = 3.
    Display
    alvly-box_fieldname = 'FLAG'.
    CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
      EXPORTING
        it_fieldcat             = alvfc
        i_callback_program      = sy-repid "<-------Important
        i_callback_user_command = 'ITAB_USER_COMMAND' "<------ Important
        is_layout               = alvly
      TABLES
        t_outtab                = itab
      EXCEPTIONS
        program_error           = 1
        OTHERS                  = 2.
    CALL BACK FORM
    FORM itab_user_command USING whatcomm TYPE sy-ucomm whatrow TYPE
    slis_selfield.
      LOOP AT itab.
        itab-flag = 'X'.
        MODIFY itab.
      ENDLOOP.
    IMPORTANT.
    WHATROW-REFRESH = 'X'.
    ENDFORM. "ITAB_user_command
    regards,
    amit m.

  • Is there a keyboard shortcut to select and deselect items?

    Using the mouse or trackpad to position the cursor over the checkbox to select dozens of tracks in my library is tedious. Is there a keyboard shortcut that will allow me to use the arrow keys to move up or down to select items?

    Jon,
    On Windows, it's the "/" key. Try Googling "lightroom keyboard shortcuts" and going to the Victoria Bampton site. She has a .pdf file with a complete list.
    Hal

  • Difficulty navigating to and identifying my RAW and JPEG Images

    Hi,
    I have several related issues that I would appreciate help with.
    I am finding difficulty navigating to and identifying my RAW and JPEG images in Aperture. I do actually principally work with JPEG and only use RAW when I perceive there to be a benefit by improving a poorly captured image.
    To give you some background.  I am using an iMac OSX 10.8.3 and Aperture 3.4.3 Camera Raw 4.04. When I Import images I import both RAW and JPEG using RAW as the original.
    At the Import stage both RAW and JPEG thumbnails are displayed. However once imported only one thumbnail is displayed in the Library on some occasions this will be the JPEG and on other occasions the RAW (as identified from the Info tab. How can I select which version to work with?
    I would appreciate assistance with this.
    Regards,
    John

    It is possible to see the Raw master along side the Jpg master if you wish.
    When a version is created (make new version from original) it is created off the original that is currently selected. So if the jpg image is the current original all versions created will be made off the jpg image. Likewise if the raw is the current original all versions created will be made off the raw image.
    Also keep in mind that a version that has no adjustments applied to it is identical to the original it was made from.
    So to get both along side each other do:
    Set raw as original, create new version from original. Label this version Raw original version. Now switch to jpg as original. Make a version from this and label it Jpg original version.
    Just ensure you never apply adjustments to these two images and you will always have both the jpg and raw images available to compare.
    In addition if say the jpg is the original and you want to make a version from the raw, instead of switching the jpg and raw you can just go to the Raw original version and duplicate it.

  • Data and Images in Aperture are a mess

    I just bought and started using Aperture, as I was hoping to get a better way to organize my images vs. iPhoto.  However, I'm not sure what is happening in Aperture, but everything is out of whack.  For example:
    1) Aperture is not sorting the images correctly by date (see iPhoto vs. Aperture) (not sure what its doing actually)
    Order in iPhoto (correct):  https://www.evernote.com/shard/s15/sh/8c59344a-ad63-46f5-8a88-010016374bfa/75c42 3a7f3ee54dfec6e89f7c72c0f23
    Order in Aperture (not correct):  https://www.evernote.com/shard/s15/sh/81c58b92-1307-4932-b224-b652966ea60a/74d37 ba969f0897719c48a7826f0e30a
    2) Aperture is showing the wrong images for various photos.  Note:  Clearly these photos are broken, stretched, just plain wrong
    https://www.evernote.com/shard/s15/sh/81c58b92-1307-4932-b224-b652966ea60a/74d37 ba969f0897719c48a7826f0e30a
    3) Aperture is showing a different photo when the thumbnail is clicked
    https://www.evernote.com/shard/s15/sh/8205f754-1c20-48b7-a2ac-e1967563b0d3/374e4 0a22028e21b78adae7f9e794d68
    Note:  This is the first photo shown in iPhoto, and is the correct photo in iPhoto, but its not in Aperture per the Thumbnail.
    4) Aperture is showing the wrong date information
    https://www.evernote.com/shard/s15/sh/c1ca65a4-7276-4734-b3a2-51fd803df86b/a2bd7 61f93844b38fcae0a4243eb4e39
    Basically, nothing in Aperture is showing correctly.  How can that be possible?  Any suggestions?

    What is your Aperture version? If you just bought it, it will probably be Aperture 3.5.1, but then your profile signature " Mac OS X (10.5.6)" could not be right?
    Looking at the examples you posted, it looks to me, like Aperture's sorting by date is correct - at least the images are ordered by the numbers in the file names, and that strongly suggests, that the capture time in the exif tags is in that order.  I don't know any camera that would name the image files with sequence numbers other than ordered by capture time. Then iPhotos order would be out of sequence with respect to the capture time. Or have you adjusted the  "Dare & Time" in iphoto to deviate from the capture times? How did you transfer the photos from iPhoto to Aperture?
    Regards
    Léonie
    If the thumbnails do not correspond to the actual image files, then rebuild the thumbnails of your photos in that project. Select all images in Aperture in the Browser, go to the "Photos" menu in the main menu bar,  and use the command "generate Thumbnails".
    After that, you should be better able to judge the ordering of the photos from the thumbnails in the browser.
    If receating the thumbnails does not suffice, repair your Aperture libry, and if necessary, rebuild it.
    Hold down the ⌥⌘-keys while launching Aperture, and keep holding them firmly, until you see the Aperture Library First Aid panel. Select "repair database"

Maybe you are looking for