Selecting and moving clips to the right of the TCI

Is there a way to be able to move the editted clips that are to the right of my current TCI, and keep the edits as they are?
I'm looking for a ripple delete with more control if that makes sense. My old editting software had a group tool which alowed me to make a cut and move every edit to the right, to exactly where I wanted to move them. I tried using the track select, but it only works on the track I drag, even if I select more than one track.

I'm not sure what the tool is called--I call it the "A-Tool" because you hit "A" to get it to come up. Anyway, hit "A" on your keyboard and shift+click on the left-most clip that you want to move, and it will select that clip and all clips to the right of it, on all tracks. Then you can move them over. If you don't shift+click, but just click, it will select only the clips on the single track.

Similar Messages

How do I gift a playlist made of half my own songs and half chosen songs to be purchased? I have tried to find the 'arrow to the right' of the playlist when I select it but cannot see this at all! Can anyone help?

How do I gift a playlist made of half my own songs and half chosen songs to be purchased? I have tried to find the 'arrow to the right' of the playlist when I select it but cannot see this at all! Can anyone help?

This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes forums.
Regards.

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

When I create a new project in iMovie and drop clips into it, it plays the first one and then quits right near the end of the second clip. I have re-started my computer, tried a new project etc, and no luck, does anyone know how to fix this issue?

This is a part of the larger MacBook Pro connectivity issue. There are several related threads dealing with the MBP's networking problems. If your unit is suffering from this type of difficulty, good luck ... (or a long ethernet cable)
(PS Everybody please make noise on this one so apple comes up with a solution.)
< Edited by Host >

Selecting and moving many messages not working - try sorting by message classes

I posted this a while back, and have an update now.
I file my sent items. Call me crazy, but I like to at the end of every quarter, move sent items from that quarter into sub folders. It's usually 2-4000 items, and ever since I installed OL2010, I have had weird issues when trying to clean my Sent items.
Example: Select 2000 items, sorted by date from Sent Items. Drag and drop to my 2009Q4 folder. It then prompts me "Creating a new item from the selected items could take some time. Are you sure you want to create a new item from these 2000 items?"
So I figured possible Ctrl is stuck down or something, so I right click, Move, select the folder. Same issue.
I start selecting smaller data sets. I got to about 50-60 items at a time that I was able to move and not get that message. I got frustrated and stopped working on it.
This morning, I decided to re-test this. Same issue presents itself. So instead, I sorted by message class. I was able to select 3800 message items. The remaining items were messages with attachments, text/mobile messages, and calendar invite responses.
It appears that some combination of selecting multiple message classes was triggering my issue. I suspect the newest of them, the mobile messages to be the issue, so I deleted them, and retried, nope, same error, even selecting only the show message class types. Would like to see this fixed, of course, and will be sending a frown with the link to this thread as well.
Chris

I had this problem too. For me, simply sorting by message class, then finding all the calendar items and moving them first, then going back and doing the rest, allowed me to move them as I liked.   However, its not clear to me that I have
all message classes (not sure what they all are), so it could be there are other message classes that cause problems when you move "mixed classes".   I do think this is an MS Outlook bug, but not clear anyone has reported it to MS. ;-<
You can prove this by simply selecting a calendar item and a msg, and try moving the two. You will have this issue.
However, you'd think that MS itself would be a vast user of MS Outlook and if we're discovering this, you'd think MS internal folks are too, so I'm deferring to them to self-resolve.   Until then, I'll just use this workaround.
Definition of "Message classes" for others reading this... You may have already inferred, but two examples of "classes" are a normal email (.msg) and a calendar item. You can sort these by clicking on the "icon" field at the top of your email
folder, just to the right of the "bell" (Reminders).   Not sure how to put a .JPG in this posting, since a picture would explain this much better than I can using words.

Trouble selecting and moving objects near text in Adobe Illustrator? Try this.

It's been 4 years since I left Corel DRAW for Adobe Illustrator. One thing I could never get used to is the crazy way text has an impenetrable invisible sheet over it making it hard to select objects near or behind it.
With Corel DRAW I was used to be able to select text by simply clicking on the visible area of the text. Selecting stuff behind the text by clicking between letters or right next to a decender was never a problem. But Illustrator is a different story.
Tonight I finally found a way to make selecting text in Illustrator behave more like Corel DRAW.
I wrote it up here: http://www.johnstanowski.com/blog/trouble-selecting-and-moving-objects-near-text-in-adobe- illustrator-try-this/
Just thought I'd share!

It's not spam, but thanks for assuming.
I was up really late writing that blog post. Posting a link was the quickest way to share and be able to go to bed.
Plus it's rather lengthy. I thought that would be rude to use an Adobe forum for my articles.
If you saw my blog you will have seen there's not much going on there at all, and no calls to action to hire me. I don't have anything to gain by getting traffic.
And, yeah, layers work for selecting, but that slows you down. Who would want to look away from their work to find and select a layer when they're trying to tweak positions of objects? Layers suck for selecting quickly.
And there must be something wrong with me but I find using Type Object Selection by Path Only by itself hard to use. I'd really just like to click on the text itself rather than an invisible hairline you have to probe to find.
Here's the post. I hope people who had trouble like me find it helpful.
Do you have trouble selecting objects near Point Type in Adobe Illustrator? You’ve been there. You want to select an object. Problem is, it’s really close to piece of Point Type. All too often we try to select objects that wind up being unreachable because they lie too close to a piece of Point Type, which we wind up selecting instead. Luckily, after years of angst, I discovered a solution.
Point Type in Adobe Illustrator is funny. There’s this invisible “shield” around it. This shield is much larger (at least it seems that way) than the text itself. It prevents you from selecting objects behind text by clicking between letter and words. This shield is particularly meddlesome with lowercase letters and decenders because we think surely we can click on that blue box (or whatever) because it seems far enough away from that Point Type. But the lowercase “g” in the Point Type’s territory.
Okay, now that we know we’re talking about the same thing, let’s move on to the solutions.
Step 1. Check ‘Type Object Selection by Path Only’ in Preferences
You’ll find this option in Preferences/Type. Click it and that nasty text shield goes away. But there’s a price to pay. With this option activated, the only way you can select your text is by clicking on the text path, a super, tiny, thin baseline thingy under all the letters, but above decenders. It’s really hard to grab. To do it right you need to slowly approach the text path with your cursor. When you’re right over it, Illustrator will let you know by adding a small black square to your cursor. Now, you can click, hold and move your text. But this workflow can really slow you down and break your rhythm, maybe even more so with it turned off.
Step 2. Add the ‘Outline Object’ Effect
Select your Point Type and, from under the Effects Menu/Path/, select Outline Object. This effect does something really sweet to text in Illustrator: it lets your Point Type objects be treated as if their were converted to Outlines. You can still edit the text, but as far as selecting it, Illustrator now considers it outlines and shapes instead of a text object. Basically, it now considers the Path of the text to be the text itself! Now, since we’ve already checked ‘Type Object Selection by Path Only’ we can now click on the text to select it. Just the text. Not the baseline, not the wacky invisible shield surrounding it.
And now… you can select things behind the text by clicking between words and letters. And the ONLY way to select Point Type is to click on the visible parts of the text itself! Problem solved.
Potential Problem:
Too much of a good thing could be a bad thing. Let’s say you have some Point Type set in a very light face and it’s pretty small or you’re zoomed way out. Selecting that text could be a problem since you have to actually click on the text itself. Actually it isn’t that hard, it may just require an extra click to grab it. If you have a set of smaller, light-faced bits of text, you can elect to just not apply the Outline Object effect to these. They’ll get their ‘shield’ back and be easier to click on. And since they’re so small, they don’t pose a problem with selecting things behind them anyway.
Applying this technique to your old files
Now that you’ve learned this awesome new way to work around type in Illustrator, you may be anxious to open yesterday’s project and get back to work. But you may be not be looking forward to applying the Outline Object effect to each and every piece of type. For this you can use Illustrator’s “Select Same” feature. Select one piece of text. Then from the Select Menu click on Object/Text Objects. Now ALL of your text objects will be selected, and you can apply the Outline Object effect to all of them at once!
That’s it. If you build ads or work with a lot of type in Illustrator, you’re about to be able to work a lot faster… and happier.

I want to set up my spreadsheet to display 2 digits to the right of the decimal, even if zeros, and not have to do it to each individual cell.

I want to set up my spreadsheet to display two digits to the right of the decimal point, even if zeros, and not have to do it for each individual cell.

Select all the cells you want formatted that way (or the entire table if that's what you want)
Open the cell inspector
Set the format to "number" with 2 decimal places

Selecting (and resizing, for example) a layer under the top layer via the Program Monitor

Hello all.
Using CS5
I am in the timeline and have selected layer 1 which is a video layer
Layer 2 is a title layer.
I want to manually resize layer 1, via the Program Monitor.
But when I go to the Program Monitor and select it Layer 2 (the title layer) becomes selected, preventing me from selecting and manually resizing/repositioning Layer 1.
The above example is a simplified version of what I usually find myself doing. Usually I have many layers above a layer that I want to resize or reposition (or do something else) but when I try to resize or repositon via the program monitor I am only able to manipulate the top layer.
Any suggestions, other than locking every layer other than what I want to resize etc .?
Thanks
Rowby

Hi Bill,
No they are separate orginal tracks.
Is there a way to "select" a layer below the top layer via the Progam Monitor -- and perform modifications on that lower level -- such a manually resizing on the Program Monitor. I find if I want to do it via the Program Monitor I have to temporarily lock the top layer.
And if I have lots of layers above the layer I want to manually resize, I have to lock all of the layers above that layer so I don't start moving around (for example a title layer which might be the top layer of the sequence) in order to manually resize via the Program Monitor.
I know (for example) in the case of scaling or repositioning a layer I could do it via the effects control panel, but I often want to do it via the Program Monitor.
Rowby

Start page starts correctly them elongates to the right of the screen and can only see part of the information displayed.

It means that I am unable to read all the information being displayed,such as my email,I cannot log onto it with the password as it is off the screen where the whole page as moved to the right of the,it appears to stretched.

This issue can be caused by the Babylon Toolbar 1.1.8 extension
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Move all clips to the right of the crt in cs5

this shortcut used to be shift-m, but that no longer seems to work on cs5.
how do you move all clips to the right of the crt?

It's been moved to the A key.

I have a one-column table in pages. Each cell has text and a number separated by a colon. Can I automatically make it two column with everything to the right of the colon in the second column?

I have a one-column table in pages. Each cell has text and a number separated by a colon. Can I automatically make it two column with everything to the right of the colon in the second column?

Here's another way that is pretty quick to do.
Formula in Column B is:
=LEFT(A, FIND(":", A))
Formula in Column C is:
=RIGHT(A, LEN(A)-FIND(":", A))
You can eliminate the colon from the result in column B by writing:
=LEFT(A, FIND(":", A)-1)
Once you do the conversion, you should freeze the result by Selecting columns B and C and then Command-C, Edit > Paste Values.
Regards,
Jerry

Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

It should be in the Users/ Shared folder.
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
Regards
TD

I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line.

I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line. It is not my home page. Help!!!

See also:
*https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Resetting_preferences

HT1343 if one is using windows 8.1 on a boot camped mac and you are using a mac keyboard . How does one unlock the numbers on the larger wired keyboard ( numbers keys to the right of the keyboard) instead of having to use the numbers at the top of the ke

Question: I am using a mac , wired Keyboard, on a windows 8.1 platform ( this is because I have boot camped my hard drive) Unfortunately when I change over from my mac set up into the windows 8.1 the key board does not behave like it does when I am using as a mac. The numbers , on the right of the keyboard , no longer function and I have to use the numbers at the top of the keyboard, very annoying. Can anybody let me know how I unlock the numbers on the right of my keyboard?
Regards CM

I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

In general settings the Wi-Fi icon is not illuminated and to the right of the icon it says,"No Wi-Fi". I've updated the most recent software and my Wi-Fi network is working fine. Help!

Wi-Fi icon in general settings is not illuminated and to the right of the icon it says "No Wi-Fi". All other icons in "General Settings" are illuminated and accessible. My Wi-Fi network is working, as evidenced by the fact I'm able to do this. A week ago the Wi-Fi setting was working fine and now nothing. I have completely updated the software.
Help appreciated.

What you see means that the Broadcom WiFi/Bluetooth chip is not being recognized by iOS.
There are some steps recommended by Apple to solve this but you may have a hardware problem.
See: http://support.apple.com/kb/TS1559

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Using export slide show from iphoto, I am trying to create a DVD of photos and vid clips in large format. The vid clips do not work using burn software. Any idea?

Have used large format, but using the 'burn' software, I am not getting seamless video quality on DVD even though I am burning at 2* speed. Any ideas? Do I need better software? Or is there a problem with the SuperDrive?

Selecting and moving clips to the right of the TCI

Similar Messages

Maybe you are looking for