Selecting bitrate when copying to 5800 via Ovi Sui...

Hello
In the old 5300-era Nokia Music, you could define a bitrate for the music files that were copied to the device. However, I couldn't find such an option in the new ovi suite. I'm using a 5800 XM. Is it possible to define a bitrate so that more music can be cramped into the phone? Thanks!

Hi,
Nokia Ovi Suite supports only SIM 1.
Br
Mahayv

Similar Messages

Select table to copy as image via Applescript

hi,
Very often I end up copying my tables and then startup Preview and do "New from Clipboard". Has anybody found a way to automate this via Applescript?
There's no starting code by me as I haven't been able to find the command for select table.
Thanks for any reply,
Gert

hi,
Very often I end up copying my tables and then startup Preview and do "New from Clipboard". Has anybody found a way to automate this via Applescript?
There's no starting code by me as I haven't been able to find the command for select table.
Thanks for any reply,
Gert

Synchronizing with 64-bit Outlook 2010 via Ovi Sui...

Is it possible to use Ovi Suite under 64-bit Windows 7 for synchronizing the phone's contacts and organizer with the 64-bit version of MS Outlook included in Office 2010?

I have tried it. It works now but there were hours of frustration along the way. I now have a device with calendar and Contacts syncing to Outlook 2010 X64.
Things I encountered along the way were:
Repeat seizures where the e71 and OVI sat there spinning there wheels and getting nowhere
After attempting for a second time to reload my backup, a bricked e71 that I eventually found out how to unlock by performing a hard reset
More seizures
The steps that eventually got me sorted out are:
Remove (via Programs and Features in Win 7) every piece of Nokia crapware including the USB drivers
I used CC Clean to hose out the registry (after reading advice on another forum)
Reload OVI and configure it to talk to Outlook
I did not attempt to reload the backup because the last time I tried that the device bricked
Although it seems to be working my recent experiences with Nokia hardware, software and support simply demonstrate my experience is not a one-off. Nokia is on a downward slope.
I will never buy or recommend anything with the Nokia brand on it.
AVOID LIKE THE PLAGUE!!

Copy data when creating GR return via delivery

Dear all:
Is there any ways that I can copy header text (MKPF-BKTXT) to header data of delivery note? (LIKP-LIFEX)
This happens when I create return delivery in MIGO and tick "via delivery" in header.
System will automatically create a delivery note when I save this transaction.
I want to copy some information to delivery note. Other header field except LIKP-LIFEX is OK, too.
Please advise. Thanks.

This is solved by Enhancement when creating GR return via delivery
I don't know how to delete my thread, so I just close it by myself.....

Bug when copying processing-instruction() nodes via XSLT

Hi,
Database version :
BANNER
Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
PL/SQL Release 11.2.0.2.0 - Production
CORE     11.2.0.2.0     Production
TNS for 32-bit Windows: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionTest case (XSLT identity transform) :
SELECT XMLSerialize(document
         XMLTransform(
           XMLParse(document '<test><?abc?></test>')
         , XMLParse(document
'<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml"/>
<xsl:template match="@*|node()">
    <xsl:copy>
      <xsl:apply-templates select="@*|node()"/>
    </xsl:copy>
</xsl:template>
</xsl:stylesheet>')
       ) as result
FROM dual;produces :
RESULT
<?xml version="1.0" encoding="utf-8"?>
<?abc ?><test></test>
instead of the expected output, with the processing-instruction() node at the right place, in document order :
<?xml version = "1.0" encoding = "UTF-8"?>
<test><?abc ?></test>Any ideas or workarounds?
Thanks.

Yep, same on 11.2.0.3 :
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - Production
PL/SQL Release 11.2.0.3.0 - Production
CORE     11.2.0.3.0     Production
TNS for 32-bit Windows: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL>
SQL> SELECT XMLSerialize(document
2           XMLTransform(
3             XMLParse(document '<test><?abc?></test>')
4           , XMLParse(document
5 '<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
6    <xsl:output method="xml"/>
7    <xsl:template match="@*|node()">
8      <xsl:copy>
9        <xsl:apply-templates select="@*|node()"/>
10      </xsl:copy>
11    </xsl:template>
12 </xsl:stylesheet>')
13           )
14         ) as result
15 FROM dual;
RESULT
<?xml version="1.0" encoding="utf-8"?>
<?abc ?><test></test>

Ovi games install via Ovi Suite

Hello,
How can I download free games from Ovi store, save the file to my PC and transfer/install it to my X2-01mobile via Ovi suite? I don't want to download and install directly from my mobile. Thanks.

Hello,
THanks for the reply, I wanted to post a new query but can't seem to find the 'Start new message" link:
My Nokia phone X2-01 seems to have a preset security code, although I have never set any codes nor pin codes since I purchased it. I just wanted to delete some message counters logs, but it asks me for security code when I select clear counters menu.
Is there any factory set - security code for Nokia phones? Thank you once again for your advice.
Regards..

Can't see mounted volume of my Canon G9 when camera is connected via USB

Why can't I see mounted volume of my Canon G9 (with 8GB SD card) when camera is connected via USB. I just want to be able to download the movie files. Aperture does this fine on my other Mac but on my MBP I use Lightroom and it does not automatically download additional files a la Aperture.
Also can't read via Kensington Multi-SD reader but suspect that's because it is a little older and does not support the higher capacity SD cards

Digital cameras have several modes in which they can connect to a computer.
One mode is sometimes called "Mass Store". The camera acts like a USB disk or thumb drive. It appears in the Finder and files can be copied from it. This obviously is what you are looking for.
Another common mode is called PTP (Picture Transfer Protocol). In this mode, the camera will not appear in the Finder. You use special software to select and transfer the images. There are many applications available to do this: iPhoto, Aperture, Image Capture, the software provided by the camera's manufacturer.
Consult your camera's manual to see if you can select the mode. My Nikon cameras can be set to either of the modes I mentioned. I think I have heard that Canon supports PTP only. I don't have a Canon, so I can't verify this. In that case you could use Image Capture, or Canon's software, or use a card reader. Card readers are usually faster than the camera anyway.

Error when copying a table

SQL-developer 4 EA2
When copying a table to a name which already exists (as a procedure) SQL-developer replies that the copy- process took place although it didn't.
You do not get the error message ORA-00955 "name already exists"
regards

If the error is on your mac computer, launch Keynote, then click the word "keynote" beside the apple, and select to "provide Keynote feedback"
If on an iOS device, go to www.apple.com/feedback and provide feedback from this web site

HP LaserJet MFP M476dw paper size mismatch when copying or scanning from ADF

We have HP Color LaserJet MFP M476dw that has an issue when copying or scanning from the ADF.
Put a single A4 sheet in the ADF and choose copy, with all settings correct & no resizing, and the output copy is moved down the page (increased top marging by a couple of inches).
My initial thoughts were a paper size issue (e.g. treating A4 as Letter or vice versa) but all settings look correct. I have even done a reset and started over and the problem remains.
If I take the original and place it on the flatbed and copy from there with all the same settings then it works fine.
There is a similar issue when scanning from the ADF. Again, scanning from the flatbed works fine.
I've tried all I can think of. Does anyone have any further suggestions? Could it be a fault in the ADF?
Here's the full device settings info:
Device Configuration
[Shop for Supplies][Support]
Product Information
Product Name:
HP Color LaserJet MFP M476dw
Formatter Number:
YF10C9X
Serial Number:
CNB7G2H6T9
Service ID:
24113
Firmware Datecode:
20131122
Disable Fax:
No
Telecom Version:
05-031-001
Location:
UK
ADF Installed:
Yes
Max Monochrome Print Quality:
600x8
Max Color Print Quality:
ImageREt 3600
Controller Number:
72
Duplexer Version:
0
Device Description:
HP Color LaserJet MFP M476dw
Language:
English
Default Settings:
Self-managed
Asset Number:
Your Company Name:
Contact Person:
Device Location:
Geo Location:
Product Security:
Off
Wired HW Address:
fc:15:b4:78:28:46
Wireless HW Address:
54:35:30:2f:d7:fc
Network In Use:
Wired
Host Name:
NPI782846
IPv4 Address:
192.168.9.18
IPv6 Address:
FE80::FE15:B4FF:FE78:2846
Total Memory:
256 MBytes
Available Memory:
117.7 MBytes
Installed Personalities and Options
PCL6
(20040201)
AirPrint
PCL
(20040201)
PDF
(20040201)
PS
(20040201)
USB Flash Drive:
Empty
Impressions
Total Impressions:
10684
Monochrome Impressions:
4799
Color Impressions:
5885
Total Equivalent Impressions (A4/Letter):
10684.0
Monochrome Equivalent Impressions (A4/Letter):
4799.0
Color Equivalent Impressions (A4/Letter):
5885.0
Duplex Sheets:
1223
Jam Events:
0
Mispick Events:
4
Photo Color Impressions:
0
Photo Monochrome Impressions:
0
USB Flash Drive Insertions:
0
Images Scanned to USB Flash Drive:
0
Copy Flatbed Images Scanned:
373
Copy ADF Images Scanned:
409
Copy Monochrome Impressions:
1122
Copy Color Impressions:
102
ADF Images Scanned to Host:
0
Flatbed Images Scanned to Host:
0
Images Scanned to E-mail:
0
Images Scanned to Network Folder:
0
Fax ADF Images Scanned:
23
Fax Flatbed Images Scanned:
1
Fax Impressions:
18
Images Sent from PC:
0
ADF Images Scanned:
1149
Flatbed Images Scanned:
779
Scanner Jam Events:
8
Paper Settings
Default Paper Size:
A4
Default Paper Type:
Plain
Tray 1 Size:
A4
Tray 1 Type:
Letterhead
Tray 2 Size:
A4
Tray 2 Type:
Plain
Paper Out Action:
Wait Forever
Manual Feed:
Off
Duplex:
Off
Bind:
Long Edge
Print
Auto Continue:
Off
Number of Copies:
1
Courier Font:
Regular
Orientation:
Portrait
Monochrome RET:
On
Wide A4:
No
Monochrome Resolution:
600
Monochrome Bits per Pixel:
8
Color Resolution:
600
Color Bits per Pixel:
32
IO Timeout:
120 Seconds
Jam Recovery:
Auto
Personality:
Auto
Print PS Errors:
Off
USB Flash Drive
Print Documents:
Number of Copies:
1
Paper Size:
A4
Paper Type:
Plain
Fit to Page:
On
Collation:
Off
Output Color:
Color
Print Photos:
Image Size:
10 x 15 cm
Paper Size:
A4
Paper Type:
Plain
Lighter/Darker:
<-----*----->
Number of Copies:
1
Output Color:
Color
Scan Settings:
Scan Resolution:
150
Scan File Type:
PDF
Scan Paper Size:
A4
Flatbed Scanner:
Single Page
Document Feeder:
1-Sided
File Name Prefix:
scan
Output Color:
Color
Copy
Optimize:
Auto Select
Lighter/Darker:
<-----*----->
Paper Size:
A4
Paper Type:
Plain
Collation:
On
Number of Copies:
1
Reduce/Enlarge:
Original=100%
Draft Mode:
Off
Tray Select:
Auto Select
Two-Sided:
1-Sided to 1-Sided
Multi-Page Copy:
Off
Fax
Your Company Name:
HP Fax
Answer Mode:
Automatic
Rings to Answer:
2
Distinctive Ring:
All Rings
Dial Prefix:
Off
Fax Resolution:
Fine
Lighter/Darker:
<-----*----->
Fit to Page:
On
Glass Size:
A4
Dialing Mode:
Tone
Redial if Busy:
On
Redial if No Answer:
Off
Redial if Comm. Error:
On
Detect Dial Tone:
Off
Billing Codes:
Off
Extension Phone:
On
Stamp Faxes:
Off
Private Receive:
Off
Confirm Fax Number:
Off
Allow Fax Reprint:
Yes
Print Duplex:
Off
Fax/Tel Ring Time:
20
Fax Speed:
Fast (V.34)
Error Correction:
On
Forward Fax:
Off
Block Junk Faxes:
Off
Phone Line Volume:
Medium
Alarm Volume:
Medium
Ring Volume:
Medium
Key-Press Volume:
Medium
Fax Confirmation:
Never
Fax Error Report:
Never
Include First Page:
On
Auto Log Print:
On
Print T.30 Trace:
Never
Paper Types
Plain:
Normal
HP Matte 90g:
Normal2
HP Matte 105g:
Heavy
HP Matte 120g:
Card stock
HP Matte 150g:
Extra Heavy
HP Matte 200g:
Extra Heavy
HP Glossy 120g:
Glossy
HP Glossy 150g:
Glossy
HP Tri Glossy 150g:
Glossy
HP Glossy 200g:
Heavy Glossy
Light 60-74g:
Light
HP EcoSMART Lite:
Extra Light
Intermediate:
Normal2
Mid-Weight 96-110g:
Heavy
Heavy 111-130g:
Card stock
Extra Heavy 131-175g:
Extra Heavy
Hvy Glossy 111-130g:
Light Glossy
X-Hvy Glossy 131-175g:
Glossy
Card Glossy 176-220g:
Heavy Glossy
Color Transparency:
Transparency
Labels:
Label
Letterhead:
Normal
Envelope:
Envelope
Heavy Envelope:
Heavy Envelope
Preprinted:
Normal
Prepunched:
Normal
Colored:
Normal
Bond:
Heavy
Recycled:
Normal
Rough:
Heavy
Heavy Rough:
Heavy
HP Tough Paper:
Tough Paper
Opaque Film:
Tough Paper
Energy Settings
Sleep/Auto Off After:
30 Minutes
Wake on These Events
USB Job
Yes
LAN Job
Yes
Wireless Job
Yes
Control Panel
Yes
Fax Ring
Yes
Shut Down After:
Never
LaserJet Updates Settings
Check Automatically
Yes
Prompt Before Install
Yes
Allow Downgrade
Yes
Allow Updates
Yes
Miscellaneous
Extended print modes modified:
No
Very Low Setting (Black Cartridge):
Prompt
Very Low Setting (Color Cartridges):
Prompt
Low Threshold (Black Cartridge):
5%
Low Threshold (Cyan Cartridge):
3%
Low Threshold (Magenta Cartridge):
3%
Low Threshold (Yellow Cartridge):
3%
Store Usage Data&colon;
On Supplies
USB Connection:
No
Font Source:
I (Internal)
Font Number:
23
Font Pitch:
10.00
Font Point Size:
12.00
Symbol Set:
PC-8
Form Length:
64 Lines
Append CR to LF:
No

To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Error when copying files using WebDav web folder

When copying a large group of files/folder to a 10gAS portal page we are randomly seeing the error: "An error occurred while copying some or all of the selected files" in Windows Explorer. Clicking "ok" will resume the file copy process.
The only error I see in the Apache log is:
[Mon Aug 2 18:00:06 2004] [error] OraDAV: Apache/OCI Error -9999/0: ORADAV: LOB was closed with active write operation
Any suggestions? I couldn't find anything on metalink, though i have logged an iTAR as well.

My AirPort Extreme card was replaced on my MacBook by Apple. Prior to this, I was getting odd errors like the one outlined above. I do not receive this issue anymore, and I think I can attribute it to the hardware issue with the card.

Not able to generate AS2 MDN when receiving custom XML via AS2

Hi friends,
I have setup the trading partner and the corresponding TP certificate import for receiving the custom XML via AS2 channel.
I am receiving the custom xml properly to oracle b2b and able to receive the same to bpel as well. however in the oracle b2b console under reports tab i am seeing only one record for inbound document receive and i am not seeing the other record for the AS2 MDN going back to vendor. I have setup the AS2 channel under the external trading partner --> Channel using the vendor AS2 URL and selected all the security parameters while creating the Outbound AS2 channel.
1. Not able to generate AS2 MDN when receiving custom XML via AS2.
2. eventhough i am able to decrypt the inbound custom XML and ablr to recieve it in bpel also for processing, in the reports tab the inbound message state is changing to MSG_ERROR and it has the folloing error message:
Error Code
B2B-50037
Error Description
Machine Info: (***********) Description: B2B inbound message processing error
Error Level
ERROR_LEVEL_COLLABORATION
for AS2 MDN generation for custom XML receiving using As2 protocol, do we need to setup anything other than the outbound As2 Channel using the external vendor AS2 URL?
Can you please help me how can i generate the AS2 MDN for the inbound custom XML document i have received and also why the inbound message is failing even though i am receiving the custom XML properly to bpel?
Thanks,
Amirineni.

Hi Prasanna,
Vendor has enabled the ACK mode as SYNC.
Below are the headers for the inbound message to B2B. and we are able to receive the input message to bpel also.
Protocol Transport Binding
ChannelName=******** AS2-To=****AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=****** Recipient-Address=https://******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=****** Content-Disposition=attachment; filename="smime.p7m" Host=****** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=****** Mime-Version=1.0
Message Digest
Message Digest
Digest Algorithm
sha1
Transport Protocol
HTTP
Transport Protocol Version
1.0
Url
http://******
security
Transport Headers
ChannelName=****** AS2-To=******AS2 TE=trailers, deflate, gzip, compress Date=Thu, 02 Oct 2014 14:26:31 GMT AS2-Version=1.2 Accept-Encoding=deflate, gzip, x-gzip, compress, x-compress AS2-From=****AS2 Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1 Disposition-Notification-To=https://******/as2 Message-ID=<CLEO-20141002_142630452-31X54N@****AS2_*****AS2.pcwbedi1-O> Content-type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m Content-length=747006 MSG_RECEIVED_TIME=Thu Oct 02 10:26:39 EDT 2014 Subject=EDI ECID-Context=1.005175bK7U^AXNJCAnf9Cx0002pW000yjX;kXjE1ZDLIPGIj2QCYV8QoKSSILRO_PQT_IS Proxy-Client-IP=***** Recipient-Address=*******/b2b/httpReceiver User-Agent=RPT-HTTPClient/0.3-3I (Windows 2003) X-Forwarded-For=******* Content-Disposition=attachment; filename="smime.p7m" Host=***** EDIINT-Features=CEM, multiple-attachments, AS2-Reliability Connection=Keep-Alive X-WebLogic-KeepAliveSecs=30 X-WebLogic-Force-JVMID=-1497702782 From=***** Mime-Version=1.0
Thanks,
Amirineni

Error Message when copying music files to Nano

When copying an album to the Nano, I receive and error message with 4 songs left to copy off of the album. Error states: Attempting to copy to the disk "IPOD" failed. The disk could not be read from or written to. With 4 songs left to copy
I have only used approx. 344.8 MB of memory. I tried resetting the Nano and then also deleting album and recopying and the same files back. Nothing seems to work, please help!

If you want to use large files you have to reformat it. It will erase any data that is on the drive, If the drive will be used only with OSX, format it as Mac Extended (HFS+) Journaled with the GUID partition table.
Start Disk Utility (Utilities Folder). Select the drive in the left column (be sure to select the drive, all the way at the left, not the volume indented below it). Select the "Partition" tab. Set "Volume Scheme" to "1 Partition". Click the "Options" button. Select "GUID Partition Table". Click the "OK" button. Enter the volume name and click the "Apply" button.

Font changes when copy and paste url (Safari to Mail)

When copy from iphone 5 (vs 7.1.2-& no I don't want to update yet ) Safari, a URL/web address and paste into MAIL app, the font changes and won't paste in the same format as the email I've been typing. Is there any way to correct this? Also, anything I type after the paste keeps that same "other" format, when I want what I had started email in to stay the same.
I tho't I"d look at some settings and under iphone Accessibiilty I have Larger Text ON and Bold Text chosen, and Reduce Motion ON. Under GENERAL and TEXT SIZE I have it set to 4th choice up. I don't see any MAIL settings re FONT. Would any of these be the cause?

OK, I think I found another way to describe my issue:
When I copy text from a webpage in Safari, some form of "meta-information", or formatting data, is kept, and when I paste into MS Word, the formatting from the webpage is retained. In my default setup of Firefox, this formatting meta-information is not retained, it only copies the plain-text.
So my question is actualy: How do I prevent Safari from retaining formatting data, and only copy the plain-text?
I have been testing some clipboard managers, and have yet to find one that will auto-filter out formatting data from text that I copy, but they can after interaction.
The other, current, method I have been using is to:
1. select and copy the text in Safari
2. paste text into notepad
3. select and copy text from notepad
4. paste de-formatted text into MS Word
Or in Firefox:
1. select and copy the text in Firefox
2. paste text into MS Word (no formatting retained)

I am dual booting my mackbook pro with windows 7 64 bit. Yesterday it started locking up at the disk drive selections screen, when you hold down the "option" butting when powering on. I have been searching all morning, and so far nothing. Thanks. :)

Hey folks,
I have been using bootcamp for months now with windows 7 64 bit, and its been fine, yesterday while I was rebooting to do some gaming, at the hard drive selection screen when you boot holding the "options" butting down, it locks up when I select the windows drive and just sits there for ever. It doesn't throw an error, it boots fine into Lion.
I searched all morning and didn't find anything, was hoping that someone might have an idea.
Thanks in advance

Search again. Microsoft has tips on what to do and Windows has a number of features
system restore points
automatic system repair using the Win7 DVD
system restore image creation
Just like you would with OS X Lion and Lion Recovery and Repair
Use WinClone 3 www.twocanoes.com $20 to make an image just like you would with Disk Utility Restore or Carbon Copy Cloner
rollback to last known good boot check point
rollback a driver or program or any changes
clean out temp files
clean registry
chkdsk
https://discussions.apple.com/people/The%20hatter?view=bookmarks

CR duplication when Copy/Pasting text from a JTextArea

I have a typical scenario of having text in a JTextArea. When I select some of that text and try to paste it either to an external text editor or even in the same JTextArea, I am getting extra line spaces in the screen.
For example, if I have the following text:
<a id=1>
<b/>
</a>When I copy paste it, I get:
<a id=1>
<b/>
</a>When I looked to see what characters were being used for the CR, I see "\r\n". This is the standard line.seperator for Windows OS which is fine. When I save this text to a file using the Java I/O libraries, it is fine (no extra lines). But when copy/pasting it prints extra lines.
Has anyone had similar problems?

Has anyone had similar problems? No. How are you doing the copy/paste? Did you write your own routines or are you using the default Actions. By default, when a Document is loaded it will convert the "\r\n" end of line string to "\n" and store the single character in the Document. When you use the getText(..) method the enod of line string will be expanded to "\r\n" on a Windows system, but this should not happen in a copy/paste operation. How do you add data to your text area?
This section from the Swing tutorial on "Text Component Features" has a working example of using copy/paste:
http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html

Selecting bitrate when copying to 5800 via Ovi Sui...

Similar Messages

Maybe you are looking for