Selecting bridge type for 9237 module on cRIO

How do you select 1/2 or Full bridge completion and Shunt settings for 9237 Bridge module on cRIO? The getting started example only seems to set the data rate?. The FPGA Property Node only has Data Rate, Excitation, and ID params available as choices? Am using 8.2.1. Other discussion threads talk about configuring with MAX but for cRIO/8.2.1 MAX doesn't show modules, just the remote system top level.
Thanks,
Bruce

Hi Bruce,
The Half vs Full Bridge as well as the Excitation Voltage settings live in the properties page for the NI 9237 module in the LV Project (right-click module item>>Properties). See attached image.
JMota
Attachments:
9237 properties page.JPG ‏36 KB

Similar Messages

Message Types for respective Modules

Hello All,
Could you please let me know how we can determine the message type and idoc types for respective Modules based ont the description. Example FICO i.e. Invoice or etc.
Thank you.
Regards,
Dinesh

Hi,
Thanks for ur reply. But i have descriptions stating "SAP Inbound Inventory Transfer" and required specification to be implemented is "Plan to Fulfill.Inventory transfer with in the plant". In this case, which idoc must be used. I have checked in the tables earlier different message types.
Regards,
dinesh

How to get select-options type fields in module programming

i need to get ranges type of fields ( like we use select-options in reports) in module prgrming..im only gettin single entry field (like we use in paramenters)...how to get it like this
field1 ___ to ___ ->
field2 ___ to ___ ->
Thanx,
Naveen Vishal

Hi,
report zrich_0006 .
tables: mara.
Custom Selection Screen 1010
selection-screen begin of screen 1010 as subscreen.
selection-screen begin of block b1 with frame title text-001.
parameters: p_rad1 radiobutton group grp1 default 'X',
p_rad2 radiobutton group grp1,
p_rad3 radiobutton group grp1.
select-options: s_matnr for mara-matnr,
s_matkl for mara-matkl,
s_mtart for mara-mtart.
selection-screen end of block b1.
selection-screen end of screen 1010.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
module status_0100 output.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
endmodule.
*& Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
endmodule.
Create Screen 100 with a subscreen area called "subscreen_1010"
Screen Flow Logic follows
*process before output.
module status_0100.
call subscreen subscreen_1010 including sy-repid '1010'.
*process after input.
call subscreen subscreen_1010 .
module user_command_0100.

How to select paper type for Canon iP5000 with Leopard and Photoshop CS3.

I have printed photographs quite happily for years on my iP5000 using PS7 and 10.X. However since installing Leopard and switching to PS CS3 I am unable to select paper type (glossy, matt, etc). Is this a 10.5 problem, or as I suspect a CS3 problem. Any suggestions would be appreciated.
I can select paper type in other applications.

I don't know if it is the same for your printer but with my Canon MP600 I experienced the same problem until I came across the fact that when Print is clicked there is a Blue Triangle on the right of the dialogue. Click this and the paper type etc is displayed.

Selecting document type for settlement CJ88

During project or order settlement (CJ88,KO88) the document type "YP" specified in the Settlement Profile is used for the FI portion of the settlement, WBS to AUC, but the controlling entries use the default FI/CO document type. We would like all transactions in the settlement process, both FI and CO, to use the document type YP.
The controlling enties, settlement from WBS to WBS, post to FI through Real Time Integration CO-FI. If I change the document type in FAGLCOFIIMG from SA to YP then the CO settlement documents begin posting as YP as desired.
Is there a way to have Real Time CO-FI Integration select a variant by transaction type so it chooses YP for only settlement transactions? Or is there a better way to have all settlement transactions use the same document type?
Thanks,
Jeff

Go to transaction KOT2_OPA and check against the order type that you use, which settlement profile is assigned.Then go to transaction OKO7 to change the document type for that settlement profile. Document types can be created in transaction OBA7.

Non-void return type for Application Module Clients Interface

Hello, can anyone guide me on how will I solve my problem.
first of all, I'm using JDeveloper 10.1.3, I use JSF, ADF Faces, ADF Model, ADF Business Components.
I made a web page that has a Transactional Capabilities, all is going smoothly, all data's can be saved to oracle database. I created a Custom Method in my Application Module and can be used in Clients Interface, that method is for saving data's to database.
My problem is I dont know how to create a custom method that returns a value in my Application Module. Which means if I set it to non-void return type, it is not visible to Client Interface. If you're going to ask me why I need it to return a value? Well since that method is for saving data's, if there's an Error Occured, I can return the Error Message and show it to my user interface.
Please help. thanks

If you want to return your own type then simply define it as serializable and you will find that it will appear in the Client Interface dialog of your AM.
eg, you could return this type from your application module to progagate a meaningful message to your UI:
package com.delexian.model;
import java.io.Serializable;
public class MyMessage implements Serializable {
    private String _severity;
    private String _message;
    public MyMessage() {
    public void setSeverity(String severity) {
        this._severity = severity;
    public String getSeverity() {
        return _severity;
    public void setMessage(String message) {
        this._message = message;
    public String getMessage() {
        return _message;
}regards,
Brenden

Selecting Paper Type for HP Photosmart 8750 In Lightroom 3.3

Since converting to Lightroom v. 3.3 I am unable to select the paper types on which I wish to print from my HP Photosmart 8750 printer. In the printer dialog box, the following option is grayed out: "Photosmart PDE." I also get the following message: "The bundle 'HP Photosmart PDE' could not be loaded because it does not contain a version for the current architecture." It then tells me to contact the bundle's creator for the latest version and then lists the following: HP Photosmart PDE v. 5.3. I would appreciate any thoughts as to what the problem is and how it may be corrected. I have downloaded the most current printer driver and did not have this problem with Lightroom 2, so I am thinking that it must be a compatibility issue between the HP software and Lightroom 3. Thanks.

I inserted photo paper into the printer tray a the start but it printed horribly, like my old canon used to do when I accidentally stuck laser paper in instead of glossy / matte.
Other prints (like from iPhoto) print fine thru the printer.
The Print dialog in the pull down menu contains no options to look at or change the paper type.
On my pc I had a huge section of options when printing where I could select the profile, colour correction, print quality etc etc on any print. Cant seem to find the same options thru Mac.
Still puzzled?!

User exit for different modules

Hi Everybody,
I want to search for all User Exits for different moldules.
Like for SD, MM.....how can we find that?
I know there is some way , Goto Se80, then.....
Please help me guys, its Urgent....
Will be rewarded.
Thanks in advance.
Regards,
Seevangi

Hi,
Go To Se84..
Give Program Name .
Display.
In the Tree U Will Have Option Called Enhancements
This Shows What R the Enhancements Available For That Program Or Transaction
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Reward Points if found helpfull..
Cheers,
Chandra Sekhar.

Output Types for QM

Can anyone tell me the output types for QM modules
regards
shankar

If you goto SPRO and click on IMG --> In the tree click on Quality Management.
This contains all settings for QM. Here you can check Output types defined for QM for various areas.
For eg if you follow path Quality Inspection --> Define Print Control forms, print programs, you will see all Output Types and respective details defined here.

How To... Change the Data Type for a SELECT-OPTIONS at run time.

Hello,
I am trying to restrict the values available for entry into a SELECT-OPTIONS at run time depending on user input.
The logic is as follows. The user has two input fields. A PARAMETER field which has the type RSDIOBJNM and allows them to choose an InfoObject. And the user has a SELECT-OPTIONS field to allow them to select the Characteristic values for that InfoObject.
I would like the following example to be possible:
The user enters 0MATERIAL into the PARAMETER. When the user clicks on the SELECT-OPTIONS control code will derive a list of possible options the user can enter in the SELECT-OPTIONS. In this case only values found in the master data or at least no values greater than 18 characters.
I have looked at the following function module SELECT_OPTIONS_RESTRICT and this do not appear to be helpful as they only restrict on the signs allowed for the values (unless I misunderstand, it is a complex function module!).
The code I have so far is (thus the user enters a InfoObject into p_char1 and the select options so_char1 should only accept active values of that InfoObject):
declaration of variables for user interface
DATA c_char(32) TYPE c.
declaration of count variable
DATA i_count TYPE i.
declaration of user interface
SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
    PARAMETERS: p_ipack TYPE RSLOGDPID.
SELECTION-SCREEN END OF BLOCK a1.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
    PARAMETERS: p_char1 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char1 for c_char NO INTERVALS.
    PARAMETERS: p_char2 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char2 for c_char NO INTERVALS.
    PARAMETERS: p_char3 TYPE RSDIOBJNM.
    SELECT-OPTIONS: so_char3 for c_char NO INTERVALS.
SELECTION-SCREEN END OF BLOCK b1.
Is what I am trying to do possible???
Thanks for any help. Ross.

You really want to restrict possible values of a select-option based on another field, not change the length of type of the select-option field, right?
Here is what you do: Code a custom F4 value help for the select-option at event AT SELECTION-SCREEN ON VALUE REQUEST FOR.. The first thing you do here is read the value of the parameter field (p_ipack in your example). You can use function module DYNP_VALUES_READ. Based on this value, you can propose values for the select-option fields. Note that the use can still enter whatever s(he) wishes in to the select-option field without pressing F4. In this case, you will have to code some input validations taking into account the value in the p_ipack field.

LR5 version 5.3 abends when selecting media type in the print module; on Mac OSX 10.9.1. Why?

LR5 version 5.3 abends when selecting media type in the print module; on Mac OSX 10.9.1. Why? The printer is an Epson 4900.

I contacted Epson and the following steps resolved the problem.
Please close all of your programs to Repair Permissions:
1. Go to your Mac Hard Drive > Applications > Utilities and open the Disk Utility.
2. Click on and highlight your main Mac Hard Drive in the list on the left.
3. Select Repair Disk Permissions and once this is finished, restart your computer.
Once restarted, please do the following:
1. Open your System Preferences
2. Open Print & Fax (10.7/10.8/10.9 is Print & Scan)
3. Highlight your Epson printer in the Printer List on the left hand side of the window if it is showing in the list. If it is not showing up, continue to step 5
4. Click on the MINUS sign below the Printer List and confirm deletion of the printer
5. Click on the PLUS below the Printer List to re-add the printer
6. Click on and Highlight the Epson Printer in the window and confirm that in the USE field it reads for "EPSON XXXXXX"
7. If it does, click ADD and the printer should show up again in the Printer List and you can try to print again
If you are still having issue, try printing from Apples Preview and see if it print fine. If so, the issue would be PS and/or LR and you would need to troubleshoot the program installation.
We take your satisfaction seriously and hope that we have helped resolve your issue. If you receive a survey from us, we would greatly appreciate if you could take a few minutes to provide us with feedback about your support experience. Your ratings and comments are extremely important to us.
If this did not resolve your issue, please reply to this email for further assistance. If you have a different support issue, submit a request via our U.S. or Canada Support Site and we will respond in a timely manner.
Thank you again for contacting Epson.

Bridge CC, unsuccessful manual installation for output module.

I have manually installed the Adobe Output Module for Bridge CC. I followed EVERY STEP in the directions from http://helpx.adobe.com/bridge/kb/install-output-module-bridge-cc.html
After installation, I am receiving the "I/O error". I have googled this error, and it appears that many are having this same issue, and no one has a solution to fix the problem. I am currently taking an online graphics course, and this first assignment should only take 1 hour...I am now up to 8 hours of trying to troubleshoot this and figure this out...and I'm wasting my Labor Day. I'm so frustrated and almost to the point of canceling my Creative Cloud membership AND my online class since I'm already running into problems with Assignment #1. I do have the CS3 program, but I do not want to go through this class with such an outdated program.
Does Adobe know if they are working to fix this problem, or if it will ever be fixed? If they are in the process of fixing it, do they know approximately how long it will take? Can someone please offer a solution or shine some light on the topic. I am working on a MacBook Pro laptop, Mac OS X version 10.6.8.
Thank you!

No, I can not get older versions. I would have to pay $999 for CS6
This is not true, you should be able to download CS6 for free with your CC subscription:
From the FAQ of CC:
Do Creative Cloud members have access to previous versions of Creative Cloud apps?
Yes. Creative Cloud paid members have access to a select set of archived versions of the desktop apps. Starting with CS6, select versions of each of the desktop creative apps will be archived and available for download. Archived versions are provided "as is" and are not updated to work with the latest hardware and software platforms.
You just have to dig a bit deeper in the Creative Cloud download center.
Try this link:
https://creative.adobe.com/products/photoshop
Or visit the Creative cloud page and look for the download center, select Photoshop icon and from this page you can select either CC or CS6

Quarter bridge for 9237

How do I select quarter bridge completion settings for 9237 with 9944?
Message Edited by Frederico Barros on 09-28-2007 09:02 AM

The 9237 is capable of full and half bridge measurements without addition equipment. In order to take quarter bridge measurements with the 9237 you need a quarterbridge completion resistor component (like the ni 9944). This turns your quarterbridge configuration into half bridge, which the 9237 can do. You will need one of these completion components for each of your strain gauges.
[will work for kudos]

Report MB5B for selected movement types

Dear All,
When I am executing report for selected movement types , system givivng me message below " Movment type is reset"
After continuing that Movement type field turns BLANK, and report is executed with considering all movement types.
If there is a way for executing MB5B report for selected movement types, please suggest.
Thanx..

Hai,
1.The MB5B report will show the stock on posting date with all movements like Goods recipt from Purchase, production order, stock transport order, & goods issue due to consumption posting, stock transfers & transfer posting.
2. This is designed to see the Opening balane+Goods receipt - goods issue = closing balance.
3.You can't take report only for particulat movement type.
4.If u want to get the details as per the movement type, then use MB51 report.

PO document type for automatic PO is transportation module

Hi,
I am generting automatic POs through transportation module. I am able to assign plant, P.org and P. group through transportation planning point for automatic PO but it is always creating PO of NB type. Is there any configuration where I can change the PO type for automatic POs in transportation?
Thanks & Regards,
Yuvnish

Hi
Check the path :-
IMG-->Material Mgt. -->Purchasing --> Define default Values for Document Type.
Regards
Amitesh Anand

Selecting bridge type for 9237 module on cRIO

Similar Messages

Maybe you are looking for