Selecting Clips for E-mail

Remember in iMovie you could select a clip and SHARE. Then E-mail it using QT.
Well I did a 15 minute Vid in FCEHD and did a voice over for a 15 second clip. Then went to to export... and it keeps using the entire 15 minute video when all I want is the 15 second one to send via E-mail. I am new here and some how I seem to have done it right one time but the voice over I did ..well I mumbled ...so I wanted to re do it and cannot seem to get the same settings. It seems simple and probably is but my brain must be full.
I open FCE and Highlite a clip and do a Voice Over. Then I go to export and save it in QT in my Movies folder...but it always seems to import the whole movie and not the selected clip. What am I doin' wrong. And better yet what did I do right the first time!
Thanks in advance.
Rob

In the Timeline, try setting In and Out points that encompass the portion of the program you want to Export
Dont forget to Mixdown your audio (Sequence>Select Only>Mixdown)

Similar Messages

I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

I had this and fixed it.
I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
After lots of hunting, I found the Signature Folder. It's in:
Yourusername>Library>Mail>V2>MailData>Signatures
Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
Since this was literally a clone of my previous setup to a new machine, here's what I did:
1. Quit Mail
2. In Problem machine, go to
Yourusername>Library>Mail>V2>MailData>Signatures
3. Move the Signatures folder someplace safe, but out of the MailData folder
4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
5. Start Mail on the problem machine
This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
Hope this helps

Auto-select clip under playhead? (for color correction)

Hi all
Another newbie question concerning color correction in FCS2.
When moving from clip to clip in the timeline, the viewer (which contains the 3-way color correction filter) doesn't refresh until I remember to double-click on the current clip to select it. In other words, if I change a filter on one clip, then move in the timeline to the next clip, the viewer still contains the previous clip's filter, and if I forget, I'll start fiddling with it, thinking I'm now looking at the current clip.
Still with me?
So, my question is, is there an "auto-select" feature whereby, as I move my playhead along the timeline, clips on a selected track (eg V1) will automatically get selected and loaded into the viewer?
I know there is an auto-select feature for tracks, which I've enabled for my video track, but it doesn't seem to be meant for what I want.
Thanks!
Matt

If you set the SYNC to OPEN, what is being played in the time line (and displayed in the Canvas view) will also be displayed in the Viewer.
Just a point of clarification - the Viewer doesn't hold the CC filter, it will only display the filters that have already been applied to currently displayed clip. If the next clip displayed in the viewer has not had the 3way CC applied, the 3way CC won't display as part of the filters on that clip.
Good luck,
x

Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

Thanks. Beforehand, I was double clicking on the multicam clip and forced to make a marker on either the Cam A or B. I realize now that I can do it in the Event Browser. THANK YOU.
Considering I may create >20 markers per clips for around 10 different interviews, I wish there was a way to bring the Event Brower to the bottom half of the FCPX windows, to resemble the screen orientation when I'm working in an actual project (one could do this in iMovie), and this way the markers could be listed to the left without having all the other event clips around it. Is that clear? Is that possible?

Keyboard shortcut for selecting clips

I'd like to program a button or buttons on my control surface to select clips in the timeline. Are there keyboard shortcuts for selecting clips? (it's not "x")

Thanks RedTruck.
The problem with x is that it seems to mark every clip, but I think you may be on to something. Is there a keyboard command for selecting the target track? I could possibly add that command to the macro to make this work....trying to get to mouse-free editing.

I am having a difficult time getting the duration of multiple selected clips. The duration display only will display the time for one clip. Yes, I know I can add them up myself, but why? :-)

I am having a difficult time getting the duration of multiple selected clips. The duration display will only display the time for one clip not multiple clips. Yes, I know I can add them up myself, but why? :-)
I am using imovie 10.0.6

For reasons that you would have to ask Apple for they decided not to allow the precise position of the playhead to be shown in iMovie 10 (unlike in FCP 10.1.x).
Geoff

Selecting aol for mail

When trying to select aol for mail in preferences,the aol is gray and cannot select. Any ideas? Thanks Using imac G5,X.3.9 and 4.03 iphoto

Hi Terry, and Welcome to "Discussions"!
Quit iPhoto.
Open the Applications folder and Rename the AOL application to America Online.
Good Luck, and Enjoy Your Stay in "Discussions"!
ali b

Share selected clips only button not enabled for videocamera

iMovie HD 06. I have 3 adjacent, no transitions clips from one iMovie that I am trying to "share" back to the video camera (I had manipulated/extracted and added audio effects to these 3 clips, which don't cut and paste from existing iMovie to a new project) plan was to share to tape, then reimport from tape back to a different iMovie (to at least get the audio back). Unfortunately the "share selected clips only" button is never enabled. Really don't want to share entire movie. Any ideas?

Well that would make too much sense! iLife 05 Quicktime did not maintain widescreen so I was not keen on trying, but (as you probably knew) iLife '06 quicktime is a nicer beast. Actually went into Apple Store and turned out that,more or less, a combination of forum suggestions........WORKED! So to others that have not been able to cut and paste clips that have had audio extracted, etc.with iLife '06: put playhead a bit before your targeted consecutive clips, click and drag from below the audio tracks upwards and to the end of the target. File, Export, Quicktime, Full Quality, Share. Pick your location to share to. And there you go. Then open a new/existing project, Import (find your desired clips), Open. Your clips with audio, special effects all import without a hitch.
Have you tried it?
iMac G5 Mac OS X (10.4.5)

"Silence Selected Clips in Time Selection" working erratically in Audition CC for OS X

I am working on a multitrack audio file and using the "Silence Selected Clips in Time Selection" to quiet any background noise between pauses. 60-75% or the time it's working fine but the other 25-40% of the time it reacts in a super odd way and takes all of the markers it makes down to -∞ db and I have to fix it myself. I also should note that I am using Synergy to share the keyboard and mouse across screens (in case it is a stuck key issue or something). What is causing this, is it something I can fix?

I have tried it in both Windows 7 and OS X and with and without the mouse sharing software, and with snapping both on and off. Maybe of note is that there are parts that I have silenced and then cut out part of after the fact, I'm not sure if that would affect it or not. Also, just in case it wasn't clear, I am doing this in multitrack view. Here's an example of some of the cuts:

Exporting for e-mail

I transfered a short 30sec movie clip from my DV cam onto iMovie. I saved it as a quicktime movie for e-mail purposes. I e-mailed it to a friend thru hotmail. The problem was, it was too small to view the clip when opened. Is there a way I could make this clip bigger but compress it way down that I could send it thru e-mail?
Mac OS X (10.3.9)

luvmacs,
The QuickTime presets that iMovie uses for web, mail etc. are kind of a one-size fits all. While it does make things easy you don't always get quite what you want.
However, you can also adjust the settings manually. Just choose Share>QuickTime>Expert Settings. After you click Share select Export to QuickTIme Movie from the drop down menu and click options.
I won't pretend to know what all the settings are for but I'd try playing around with size and frame rate. Through some trial and error you should be able to find something bigger that can still make it through as an email attachment.
Matt

How do I pre-render only portions of the timeline or selected clips?

I'm switching from Vegas Pro to Premiere Pro. In Vegas, you select a portion of the timeline, then hit control-B and it pre-renders that segment.
In Premiere, you hit enter, but it doesn't pay attention to the selected clips, it just pre-renders the entire sequence.
This wouldn't be such a big problem except I'm managing projects that are fairly long, with 20-30 sequences and 20 or so nested sequences in each project and I'm switching between around 18 different projects for a series of 23 or so videos.
These vids are already taxing my system resources with only a few minutes or so (referencing about 80-120gb of source footage), but my office comp is kinda weak.
The problem is that when I pre-render a nested sequence and bring it back to the main timeline, I have to pre-render it *again* after making the next set of adjustments (ie color correction, transitions etc). Then I have to do it AGAIN when I copy it to another timeline for another similar project.
Every time, it can take as long as 15 or 20 minutes (my video card is an nVidia GTX 560 Ti, it has CUDA, but prem doesn't support it for some reason).
When my main timeline glitched out, forcing me to split into different projects, it took me almost 4 hours just to copy things into place with the additional 20 minutes to load the glitched file.
Then I had to go and pre-render everything again to work my edits back into place.
Even when everything is 90% correctly laid out, I still have to wait for the entire sequence to finish pre-rendering.
As above, in Vegas Pro, I just select a portion of the timeline and the pre-render sticks to that area.
I saw an article that said you could create in and out points and use that for rendering, but it doesn't seem to be a CS6 thing.
I heard that Adobe was trying to keep CS6 up to date as a parallel thing to CC. Surely I don't have to switch to a $600/year subscription just so I can pre-render portions of the timeline like a lower-end competitor program has had for something like 5 years...?
What am I missing? There has to be a way to do this simply.

Are you sure?
I have only 3 options on my Sequence menu.
The first is: Render Effects in Work Area (default shortcut - Enter)
Then: Render Entire Work Area
and: Render Audio
No other Render options are available from that menu.
Oddly, those two things are virtually identical. One of them shows 52 clips, the other showed 57 clips. With 26389 frames (approximately...) ETA is around 20-25 mins. That's not very workflow friendly.
It is smart enough that if I pre-render once, making minor changes later makes for much less pre-rendering work, but because I'm working with so many similar projects and sequences, all of them end up needing to be completely re-pre-rendered even if I'm doing a copy-paste and I need to tweak a few little things in one area of the timeline.
This was especially evident recently when in a 3 hour period, I had to go through 4 revisions and needed to keep my original iterations because the person who made the broad, sweeping decisions was making really bad decisions and I knew I would end up going back to my original plan and making a few comparatively simple changes (which is exactly what happened right after the 3 hours).
Out of 3 hours, I could have lost a good hour and a half just waiting around for pre-rendering stuff that hard already been pre-rendered, but because it had been copy-pasted, Prem couldn't see those previous pre-renders.
I actually only lost around 40 mins. But I had to reshoot footage, including setting up lights and camera angles, plus import and do color correction again thanks to no round-tripping to speedgrade and having shot in other areas with those cameras...
If I had been doing it in Vegas, I would have spent only around 10 minutes doing those pre-renders. Oh and Vegas can use my GPU... I'm an Adobe guy mainly, so it's frustrating to see Vegas win on silly niggles like this.

Is there a way to change the duration of a group of selected clips all at once?

Hi all,
I'm working with good old Premiere 6 on Windows 7.
Is there a way to change the duration of a group of selected clips all at once? If I have a large group of clips in my timeline that are all the same duration, once I've selected them all in a group, can I somehow change the frame number duration of all the clips at the same time?
I've found other things that can be done to a group of clips at the same time, but I can't find a way to change the duration of a group of selected clips.
Thanks,
digi

Thanks Jim and Bill,
In my efforts to work around the problems with the distortion and horizontal interlace lines that come when using the Motion Settings, I'm doing stop frame animation with hundreds and hundreds of layers in PSDs in multiple files placed in hundreds of one, four and six frame sections in Premiere, so if I find that I need to change the number of frames per clip in hundreds of consecutive clips (not actual duration of speed changes), then I need to pull out the right side of hundreds of frames after first moving them apart enough to allow for changing them if I'm making them longer.
These animations are different from the rotating reel animations in that they are for laterally moving subjects that are long streams of moving graphics and photos.
I read about "clip nesting", but I think that only applies to clips or groups of clips that are the same, whereas my clips are each from different imported layers times 125 or so, consecutively placed one after another to create the laterally moving stop frame animation.
Now I've tried johnbmx4christ's alternate method of creating rotations that was just posted on the other thread about the rotation distortion, but that method results in the same oblong distortion and messed up looking horizontal interlace lines.
What a can of worms.
Thanks,
digi

How can I select to answer a mail with or without the message

Hello
When a mail is received and then opened, I have the options to answer to the sender or to all. In the account preferences, I can specify if the original message is copied or not. This option applies to ALL the answers. How can I choose when editing a mail if I want the message to be copied or not ?
Kind regards
JP

This is the easiest method I have found that will resolve your issue.
'Tools' > 'Account Settings' > 'Composition & Addressing' for the maill account
or
'menu icon' > 'Options' > 'Account Settings' > 'Composition & Addressing' for the mail account.
deselect / do not select 'Automatically quote the original message when replying'.
Click on OK to save changes.
To send a 'Reply' with no original message, simply click on 'Reply' button.
To send a 'Reply' with all or part of original message.
Highlight the section of the message or all of the message and then click on 'Reply' button

Something happened, now I can't select clips in the timeline of my current project(in Elements 4)

I've been working on a project for a few days now, everything's been fine. Last night while editing, something happened when I was trying to add a transition between two clips. Now I can't select or edit any clips in the timeline anymore, and can't add new ones. When I click on the clips in the timeline, nothing happens. When I try to drag the select box around several of them, same thing. It acts like there's nothing to select. Same thing with right clicks, soundtrack mp3s, etc. The clips ARE still THERE though, and they all play fine in the preview screen in real time, and when I drag the slider back and forth along them.
All the clips are already rendered except the one transition I was adding when this started. When I hit 'Enter' to render, though, it says "Rendering 1 of 6 Audio Previews" instead of the usual x-number of video previews. I've not seen that before so it probably has something to do with all this.
It's ONLY with this one project. I can still edit and select clips in all my other projects as before.
I've already tried loading other projects and then coming back to this one, as well as closing the program and re-opening it. My current project is still stuck like this but the others are fine.
Please keep all this info in mind. This can't have anything to do with codecs or the clips being in the wrong format for the program. They're all regular AVI files and MP3s, I've been selecting and editing every single clip on this timeline dozens of times over the past few days with no problems. I'm just suddenly not able to select or edit them anymore or add anything new to the timeline, but they still play normally as previews.
I'm really hoping this is a simple thing where I've just tripped some setting and accidentally saved it that way and it can be easily changed back.

OK, then all that I suggested here:
Now, Exit from PrE, and Shutdown the computer completely. Wait a few moments, and then do a cold boot, launching PrE and Opening that Save_As Project. Do you now have the ability to edit the Clips on the Timeline?
If not, go to the location where you Copied the AutoSave folder, and view the files with Detail View ON. Then, look at the Date/Time of the files (probably will be 5 of them). Choose the last one written, Open that, and test. If no change, work backwards to the oldest.
If nothing is working, the only thing that comes to my mind would be an issue with the display driver, BUT that should affect all Projects, and not just this one. However, updating the video driver is always a good step, and should not hurt anything.
Note: many MP3's can cause all sorts of problems. I recommend always converting them to PCM/WAV @ 48KHz 16-bit, and replacing MP3's with those WAV files. One can use the great, free audio-editor, Audacity, to convert the MP3's.
If all of the above tests fail, let us know, and if you get any error, or warning messages, copy those down completely, and post those
all failed too?
If so, there is nothing that I can suggest. It seems that your Project is hosed, and is very likely not recoverable.
Sorry,
Hunt

How to send FCP edited audio clips for processing in Soundtrack?

Hello
How do I send just the edited audio clips from hour long files to be processed in Soundtrack from Final Cut?
I need help as I'm trying to adjust some edited audio clips in Soundtrack Pro but when I send them from FCP to Soundtrack - it opens the whole original audio file and then any adjustments I apply in Soundtrack are being processed over the whole audio file not just the short edited audio clip that I want to adjust.
Normally I don't mind as my scenes are usually short and Soundtrack analysis over the whole scenes audio is usually desirable, but this projects files have been transfered from tapes as hour long AVI files (all the tapes clips transfered into one hour long files) and every FCP edited audio clip I send is being treated as an hour long audio file in Soundtrack.
I'm sure there's a simple answer for settings but I haven't been able to find it. Any advice appreciated.
Barra

Thanks Javi, my sequence is an hour and half duration so what I'm trying to do is save processing time in Soundtrack by just processing adjustments on the few audio clips that need processing.
I have set Soundtrack to open referenced audio only and with 5 sec in and out handles, but it still imports the whole original audio file into Soundtrack timeline upto the selected clip, I then double click in Soundtrack on the clip in brackets, and it then selects just the audio clip I want to adjust, then Soundtrack will just process on the edited clip but when I 'render to action' it seems to apply changes to whole original audio file - taking longer than I want.... frustrating
Also the sound always sounds very different in FCP than Soundtrack even after 'rendering to action' and rendering in FCP... this is not the easy workflow I expect from such expensive software programs, I understood that they work together in a fully integrated way, what's the problem! This is wasting my precious time and preventing me from editing not helping me, this is a common problem and yet I can find no help in the user manual - I'm not impressed!

Selecting Clips for E-mail

Similar Messages

Maybe you are looking for