Selecting display screen and resolution for L540 and other thinkpads ?

What is the difference between different types of displays : 15.6 " TFT HD (1366 X 768), 15.6 " FHD (1920 X 1080), 15.6 " HDD (1366 X 768) ? I am planning to purchase a 15.6 " Thinkpad but I am not able to decide which type of display to get. FHD display costs $170 extra, and how much the pixel density will affect the screen resolution in 15.6" ? I know in 15.6" screen, 1366X768 will have a PPI of around 101, around how much PPI we need generally ? I am going to use laptop for work purpose, coding, deveopment etc. I am not a gamer and will play and watch movie ocassionaly. So, what type of display will suit me ? Any help will be deeply appreciated.
Thanks

If you are doing desktop publishing, and use a clear plastic ruler to take measurements off the screen, a 19" (18" viewable) ideal resolution at 72 dots/inch and 4:3 aspect ratio yields 1036 by 784 pixels, which is never supported. The closest one down from that is 1024 by 768, adjusted to a picture width of 14.2 inches by height of 10.6 inches. this will give you a really good "what you see is what you get" display, and can save you time and trouble.
That said, it seems nowadays that folks Not doing desktop publishing set them to the highest resolution possible, and then increase the default browser text size until they can read it. If you choose not to maintain a 4:3 aspect ratio (4x number of pixels horizontal to 3x number of pixels vertical) you will have to live with whatever distortion is introduced into your work, including movies and pictures of real-world objects from the Web.
Tests show that refresh rates above 75 Hz reduce flickering for almost everyone, but that there is wide person-to-person variability below that rate. So set it to 75 Hz or higher, if your display supports it.
In any case, the highest refresh rate that works with your display without making high-pitched whining noises or getting really hot will reduce eyestrain. The reduction in system performance from higher refresh rates is truly negligible, as long as your display hardware has VRAM (and the Blue & White has 16 MB on the default display card).

Similar Messages

Is there and optimum photo size and resolution for use on the ipad?

Is there an optimum photo size physical and resolution for use on the Ipad.

It depends on whether you want to zoom in the image. If you don't, pre-converting them to the native screen resolution of your iPad 2, 1024*768 (assuming 4:3 aspect ratio, as is the case with most Point and shoot (but not DSLR, which, generally, use 3:2!)) will make sureyou use the least storage and will always have the fastest file transfer.
If zooming is important and you have pictures over 16 Mpixels you want to fully zoom in, then, you'll need to use third-party apps like Photo Manager Pro (review: http://www.iphonelife.com/blog/87/all-one-photo-viewer-roundup-70-price-drop-bes t-image-viewer ), which doesn't downsize your pics and doesn't use much more storage than it should.
Let me know if you have further questions.

How to control Color Mode and Resolution for brochure creation?

Hello guys,
I am trying to find some settings within Pages, where I could set CMYK color mode and 300 dpi resolution for my pdf file.
I am creating brochure from scratch, using blank document, because non of brochure templates work for what I need. But I can't find any controls for color mode and resolution set up.
Is there any solution for this?

There has been a lot of discussion in the Pages forum about resolution and some on CMYK.
Much of the discussion has been incorrect.
For the colour handling there is the colour palette
The Apple Colour Palette is the user interface for colour managing vector objects created in Apple Pages such as rules and panels and for colour managing one class of vector objects not created in Apple Pages, namely typographic objects.
Imported objects maintain their colourant model and colour space, if there is one. If there is none, a colour space is assigned and the assigned colour space is saved out into the PDF, opposite e.g. Adobe Photoshop which will colour manage the object in the open editing session, but will then save out the object to disk without the assigned ICC profile if 'Colour Management: Off' is configured.
Therefore, if the imported object is data space CMYK and the colour space device CMYK, the system will assign the Generic CMYK Profile which is equivalent to ANSI CGATS TR001 colourimetry (US SWOP); if the imported object is data space RGB and the colour space is device RGB, the system will assign the Generic RGB Profile which is equivalent to sRGB colourimetry in OS X 10.5 and higher.
In general, always capture and then convert for correction in one of two data spaces with three channels, either ICC colour managed RGB or ICC CIELa*b D50. Then convert to CMYK1, CMYK2, CMYK3, CMYKn from the ICC colour space chosen for correction and archiving. This colour space should be large enough to hold any colours that the output colour spaces can hold.
The Apple ColorSync Utility has a gamut comparison dialogue which is 3D (point, press, and turn the 3D gamut comparison). Use this facility to pick an ICC colour space of reasonable size and shape for correction and conversion into final output. Don't pick sRGB as a quick look will show that it can't hold as input what ISO reference offset can hold as output for pure cyan, let alone hold what a big inkjet can hold in greens, blues, reds and yellows.
The ICC architecture lets the ICC profile for the printed output match out of gamut colours to in gamut colours using the Perceptual rendering intent, as intended in the original architecture from 1995. Adobe internally introduced an inhouse conversion for compatibility with PostScript and as default for PDF, Relative Colorimetric with Adobe Black Point Compension. Relative Colorimetric is in fact a proofing transform, without gamut mapping. Black Point Compensation is a simple linear scaling of the lightness to compensate for the fact that the shadows will be clipped in a Relative Colorimetric conversion.
The other problem is transparency, introduced in the QuickDraw Graphics Extension for Mac OS 7.5. Transparency is not supported in any version of Adobe PostScript (level 1, level 2 or level 3). Transparency is also not supported in any version of Adobe PDF prior to version 1.4 and higher. Therefore, unless the RIP Raster Image Processor is able to accept PDF 1.4 and higher, transparency has to be rendered / flattened which is done in the PDF/X-3 filter of the Apple ColorSync Utility.
The idea in the PDF/X-3 filter (for Adobe PDF 1.3) is that the everyday enduser, after placing ICC colour managed RGB or CIE La*b D50 objects, and after choosing an ICC colour space for objects created in Pages, chooses the ICC colour space for the output condition. The filter accepts both ICC profiles of type MNTR Monitor with data space RGB, ICC profiles of type PRTR Printer with data space RGB, and ICC profiles of type PRTR Printer with data sapce CMYK.
The colourant conversion (RGB to CMYK) and the gamut mapping (out of gamut colours in input colour spaces mapped to in gamut colours in output colour space) is then calculated as per the ICC profile for the output condition. An output condition is the combination of factors that affect how colour is formed: the colour lightness and colour tint of the paper, the colours of the colourants, and the tone value increase. Think of gamut mapping in a good ICC profile as Format 1 kerning in a TrueType font (where your font has state-based kerning for up to 8 glyphs simultaneously).
Below a link to a discussion of how to change the default PDF/X-3 filter the Apple ColorSync Utility. "Wegen diverser Fehler im Mac OS X empfiehlt es sich, wo immer möglich, die PDFs ohne Transparenzreduktion (also auf normalem Weg) über den Befehl Als PDF sichern zu erstellen und das Flattening der Druckerei zu überlassen," that is, pick the plain save as PDF path and leave the transparency flattening to the prepress technician.
Henrik
Reference:
http://www.icalamus.net/tutorials/howtocreatepdfx.php

Formatting size and resolution for PDF documents

How do I format size and resolution for PDF documents with Adobe ReaderX

No way that I know of with just the free Reader.

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?

Hi All, can i have some production support issues with rootcasue and resolution for SAP TM?
Thanks,
Sreenivas

Hi Sreenivas,
I would recommend that you read the Rules of Engagement and other documents in the Getting Started link (top right) before posting anymore. Your Discussion will most likely get reported as non-specific and get removed. If you have a specific problem with TM, please post it in a new thread with error messages, version and SPs installed, and how the error occurs and what you are trying to get TM to do.
There are a lot of resources available in the TM Overview page which can help, so start there and maybe also look at some of the MKS (Monday Knowledge Session) recordings which should also be listed. There are also a lot of experienced people who can help resolve issues your TM installation, but you need to provide enough information on the problems you are having. If you are just looking for information on past problems, do a Search or simply browse through past Discussions which are marked with a green Check (Correct Answer).
Regards, Mike
SAP Customer Experience Group - CEG (and a Moderator)

When will Hub automatically select fewer than 2500 segments for tuning and/or testing?

I have two systems (FR/IT) with 64K+ total segments uploaded.
When I specify "Auto" for tuning and testing, the system only extracts 500 (or some other number < 2500) tuning and testing segments from the TMX files that I uploaded. On visual inspection of the subsequently downloaded training, tuning,
and test corpora, I see nothing unusual: alignment is OK, repeated and partial segments are not very frequent, etc.
Similar content extracted in the same way from the same WorldServer db for other languages (PE, ES, NL, ID) works fine.
When will Hub automatically select fewer than 2500 segments for tuning and/or testing?
Thanks!

Hi Mike,
Here is how auto-selection of Testing and Tuning data works in the Hub.
1. If a segment in tuning data is identical to a segment in training data, the segment is removed from training data.
2. If a segment in tuning data is identical to a segment in testing data, the segment is removed from testing data.
3. If a segment in tuning data and testing data is identical to a segment in training data, the segment is removed from training and testing data.
4. If a segment in testing data is identical to a segment in training data, the segment is removed from training data.
Hub auto selects 2500 sentences and the data under goes above adjustments. As a result you will see fewer than 2500 sentences.
Additional details can be found in hub user guide:https://hub.microsofttranslator.com/Help/Download/Microsoft%20Translator%20Hub%20User%20Guide.pdf
Please let us know if you need any additional information.
Thank you

Slice and 'saving for web and devices' not saving all images in selected area

Ive designed my site in illustrator and now im using slices and save for web and devices.
When I save a slice as a jpeg or gif it saves the text and but not the background image behind it. I haven't locked the background image and all the content is on the same layer in illustrator so why is it doing this and how can I stop it?
Thanks
James

Thanks for your reply. Yes, my Photoshop CS5 is updated to 12.1. I'm running OSX 10.5.8 and have tried viewing in Safari, Firefox, and Chrome with no improved success.
I have been reading these forums for about 3 hours trying to find the answer to this question but am still at a loss. I have found one article here:
http://stackoverflow.com/questions/7974006/overlapping-image-in-photoshop-splice-how-to-fl oat-with-css
which explains using an "absolute" value in CSS to lock images in place. I'm currently working in Dreamweaver to see if it's a common error in Photoshop when resizing browser but is easily fixed on the CSS side.
Any help would be appreciated
Thanks!

Did up date for 10.7.4 to 10.7.5 and update for Aperture and now Aperture doesn't open. How do I fix?

Did up date for 10.7.4 to 10.7.5 and update for Aperture and now Aperture doesn't open. How do I fix?

I heard dump the app and reinstall? How do I go about that?

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond I do not understand how a company like Apple puts experts to help users Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

Users of imovie experience a lot of problems and crying for help and no one at Apple did not respond
I do not understand how a company like Apple puts experts to help users
Please note that anonymous experts in Internet offer their help for money

Help me plz.. i,ve got a apple i phone 4 and i'm the 2 owner of it and i dont have it's apple id and passward for it and 1st owner doesnt know it too so what can i do for this plz help me....

help me plz.. i,ve got a apple i phone 4 and i'm the 2 owner of it and i dont have it's apple id and passward for it and 1st owner doesnt know it too so what can i do for this plz help me....

Neither can we. Only the original owner can help you, surely he/she can reset their password.

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?

My mac 10.8 does no have the file, com.apple.desktop. plist I wentto lIbrary, preference and look for it and it is not where in my mac. I also launch time machine and file is no where on my Mac. How do I get this file back?
thanks

System files are hidden by default in Finder now, search for what you want then click the little + button on the top right of the bar that appears when you do a search. A new bar comes up and click the first box (that says "Kind"), change it to "System Files". Then change the box that says "aren't included" to "are included" and your file should show up.
http://osxdaily.com/2009/02/25/show-hidden-files-in-os-x/

Interview Questions and Answers for Pricing and Shipping Modules!!!!

Please let me know the Interview Questions and Answers for Pricing and Shipping Modules?

http://www.google.co.in/#hl=en&tbo=d&sclient=psy-ab&q=interview+questions+in+oracle+pricing+and+shipping&oq=interview+questions+in+oracle+pricing+and+shipping&gs_l=hp.3..33i21.1169.38878.0.39096.61.45.10.6.6.4.4004.21813.2-21j9j6j3j2j1j1j1.44.0.les%3B..0.0...1c.1.jEq3EQIj8vA&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&bvm=bv.1357700187,d.bmk&fp=cedcde5e8e6bc792&biw=1280&bih=619
HTH
Mahendra

Oracle10G and oracle11gr1 for windows and Linux

Hi
Can you help me in getting these Softwares
Oracle10G and oracle11gr1 for windows and Linux ,I am unable to get them .
Thanks in advance
Sanjeev Sen

Oracle10G NOT SUPPORTED ANYMORE,NO SOFTWARE AVAILABLE TO DOWNLOAD TOO
oracle11gr1 for windows and Linux > http://www.oracle.com/technetwork/database/enterprise-edition/downloads/index.html

[svn:fx-trunk] 8136: Adjustments to default size and padding for TextInput and TextArea skins.

Revision: 8136
Author:   [email protected]
Date:     2009-06-23 16:16:49 -0700 (Tue, 23 Jun 2009)
Log Message:
Adjustments to default size and padding for TextInput and TextArea skins.
TextInput default with is big enough to hold 10 characters (it will actually hold more than 10 "normal width" characters)
TextArea padding matches TextInput padding
These changes are done to the Spark and Wireframe skins.
Bugs: SDK-16300 & SDK-16294
QE Notes: New baseline bitmaps are needed (sorry Peter!)
Doc Notes: None
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16300
    http://bugs.adobe.com/jira/browse/SDK-16294
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/TextAreaSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/TextInputSkin.mxml
    flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/TextAreaSkin.mxml
    flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/TextInputSkin.mxml

I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

I have to use microsoft office 2007 and 2003 for windows and I'm using a macbook pro, How i can get the on mac?

You can either use Office for Mac 2011 or use Boot Camp to run Windows or use a VM, such as Parallels Desktop to run Windows. Running Windows, you'd be able to use MS Office for Windows.
Clinton

Selecting display screen and resolution for L540 and other thinkpads ?

Similar Messages

Maybe you are looking for