Selecting Execution Target Option not appear

I have the LabView 7.1 on PC. the Real Time is viewable to me in the "Measurement and Automation Explorer" . I can see the the devices which are present in the Chassis, but when I start the LabView 7.1 for prog. the "Execution Target " Selection Combobox is not Appearing on the window. Can any help how to configure this in my LabView so I can connect the Real Time.

1 cd of Full Dev. System & 2 are Device Drivers .
It's not a device driver - it won't be on the same CD.
It's a separate product.
This link is for the LV 8.0 version - you will have to look around or call your rep for the 7.1 version, or else upgrade your LV 7.1 to 8.0.
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks

Similar Messages

The data target is not appeared in the Infopackage under datatagets tab.

Hi thanks for your response, i eloboreted my problem below pl see,
In the Info Cube structure i check the Trassactinal check box, In the Infopackage level under the data targets tab i selected the 'Select data targets' radio button icon but the data target is not appeared in the table.pl give me a suggetion in which location can i make a change.
Thanks & Regards
Bhaskar

The same question in data source is not appeared in the Infopackage.

Target cost not appearing in process order

Hi All,
Please let me know the reasons for target cost not appearing in process order.
Thanks,
SAP PQ

Two more scenarios:
1. You have co-product.
2. You reverse the variance calculation.
It will show the target cost only after you run variance calculation.

The window to select dimensions simply does not appear and I can't move forward, due to variables exit in the report

Dear experts,
I am having an issue when I try to create a WEBI document using Bex query through OLAP connection (Bics).
Due to variables exit, it is not possible to open query pannel in webi to choose wich dimensions to add to the webi document.
The window to select dimensions simply does not appear and I can't move forward!
In RSRT ou Bex Analyzer, the query is running fine without errors.
CMOD code is like this (I believe there is not any error as it is working flawless on other reports for other variable names):
WHEN 'ZREDT1'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
*      wa2-low = |{ v_year_h }12|.
       IF sy-subrc EQ 0.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
*        wa1-low = wa2-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
    WHEN 'ZREDT2'.
     IF i_step = 2.
       CLEAR wa2.
       READ TABLE i_t_var_range INTO wa2 WITH KEY vnam = 'ZRE_DT_IN'.
       IF sy-subrc EQ 0.
*        wa2-low = |{ v_year_h }12|.
         v_year_h = wa2-low(4) - 1.
         CONCATENATE v_year_h '12' INTO wa1-low.
         wa1-opt = 'EQ'.
         wa1-sign = 'I'.
         APPEND wa1 TO e_t_range.
       ENDIF.
     ENDIF.
Please provide assistance,
Thanks in advance,
Kind regards,
André Oliveira

I solved it.
The problem was due to date coming to exit - as you know some time intervals start at 01-01-1000, and as I was calculating 1000-1 = 999
I was getting and interval from 99901 to 201405. Do not know if it was not working because CHAR NUMC6 was failing trying to recognize interval 99901 - 201405, but probably, this was the issue.
Thanks for your inputs,
Best regards,
André Oliveira

Syncing options not appearing in iTunes 12

When I plug in my iPhone 5s (with iOS8) to sync it, the normal sync options bellow in Summary do not appear.
In addition, I cannot view the music in it. And when I drag music or select Add to... iPhone nothing occurs.
Does anyone have any tips or idea of why this may be?

Hi Since ios 7 almost everything can be dropped over your WiFi When you charge your phone if Automatically backs up to iCloud If you have problems backup to iCloud over your WiFi Then Restore iPhone back to Factory Settings Use same Apple ID Then you will get all your apps & data back. We have 2 iPhones & 3ipads & have not used a pc for over a year with them. Cheers Brian

Why does the "show the blocked pop-up" option not appear?

The pop-up blocker used to give the option to "show the blocked pop-up." This option is listed in parentheses on the Pop-Up Blocker help page. Since I upgraded to FireFox 9.0.1 (and still in 10.0) I often don't have the option to "show the blocked pop-up." Some sites are really unusable without this option.
There also used to be a question about this on the forums. It still shows up in a Google search, but not by searching FireFox Help. I'm running Windows XP, but the op was running Windows 7. I have not noticed the problem on my Linux machine at home.
My question is: Why does this option not (always) appear, and is there any way to make it appear?
Thanks!

You can set the default in "Firefox/Tools > Add-ons > Plugins" and change that for the Shockwave Flash plugin to "Always Activate".
You can inspect and manage permissions for the domain in the currently selected tab via these steps:
*Click the "[[Site Identity Button|Site Identity Button]]" (globe/padlock) on the location/address bar
*Click "More Information" to open "Tools > Page Info" with the Security tab selected
*Go to the Permissions tab (Tools > Page Info > Permissions) to check the permissions for the domain in the currently selected tab
See also:
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions

"Save as" Options not appearing in Photoshop

"save as" options do not appear when trying to save a PSD file as a PNG, etc. Any ideas? I onoly get 3 or 4 choices and no JPG, PNG, or some of the more common ones.

You must be on CS6 with a Mac?
You copied Adobe plugins from a previous version into CS6 or pointed CS6 to a previous version plugin folder. Delete all the plugins you moved.
If you have 3rd party plugins they should be in the plugin folder but should be latest versions downloaded from website rather than just moved.

Selected Desktop Picture Will Not Appear

I recently downloaded this picture from this site:
http://interfacelift.com/wallpaper/details.php?id=654
I have done so on both my iBook G4 (12") and now my iMac G5 (20"). I selected the file for 1680x1050 to match my resolution settings.
I placed the file in the Desktop Pictures folder and opened System Preferences. A thumbnail of the image appears in the list of choices as the other images do and I select it. However, the image does not appear on my desktop, instead I get a solid default blue background and that is it.
Other images I have downloaded to not appear to have the same problem and I am able to open the picture with Preview with out issue. I have tried various File sizes and resolution settings with no effect. I did not have this issue on my iBook.
Any idea how to fix this?

Hi, Jason.
I was able to reproduce the problem you are seeing with that image. I also tried the 1900x1200 download version: same problem.
I suspect it may have something to do with the fact that the details for the file (perform a Get Info on the image, open the More Info panel) shows:
"Profile Name: Calibrated RGB Colorspace"
which is the ColorSync Profile specified in the image. I'm using the Cinema HD color profile with my 30-inch Cinema HD Display, so perhaps that may explain why the image cannot be used as a desktop image: lack of matching ColorSync profile.
I was able remove the specified ColorSync profile as follows:
1. Open the file in Preview.
2. Select File > Save As.
3. Specify a new name for the file.
4. Specify a location for saving the file.
5. Select JPEG file type and desired Quality.
6. Click Save.
I was then able to use the newly saved image as my desktop picture.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

HT1368 Wish list option not appearing on my iPhone 5 with iOS 7

Wish list not appearing on my iOS 7

Are you trying to view or add to your wish list ? If adding to it, what are you trying to add (if it's a free item then you won't get the add to wish list option) ?

Target element not appearing

hi all,
i have node is source source_n1 occurace 0.unbouned ,in target it is mapped to node target_n1 occurance 0.unbouned .
target node has extra fields tar_e1 mapped from another source node which has element e1 ocurace 1.1
target elemnet occurce 0...unbouned have given
probelm is that Target node target_n1 is getting occured times sourece node source_n1 but the element in target is apperaing only once in target ( it appears only in first target node only ) .
it is not appearing in other target nodes target_n1
plz help me out .
Thanks

Hi,
As Raj has correctly said use the same. Refer the below example.
Use standard function "useOneAsMany" http://help.sap.com/saphelp_nw04/helpdata/en/ef/df564b6aa24fc9ab0d685460747de5/content.htm
Thnx
Chirag

Viewer Version option not appearing in New Folio window

When I create a new folio I do not get the option to specify the Viewer Version.
The option does not appear in the New Folio window - see screengrab.
As I understand it - I need to set this to v23 or higher to allow my multistate objects to export as vectors when article is set to PDF (to prevent pixelisation on some ios devices).
I am using CS5 on a mac with the latest versions of the folio tools etc.
Any help would be greatly appreciated

I've just tried installing the tools on another machine (same hardware & software) and it works fine.
It seems there's something wrong with my install of the tools, in the About panel of the folio builder mine says : 13.1.1.20130115_m_709452 7.0.5.17
Where as the machine that works says: 13.1.1.20130115_m_709452 7.0.9.23
I've uninstalled the Folio Builder Panel and the Folio Producer Tools, then reinstalled - but no change.
Any ideas?

File Link Framemaker Document option not appearing

Edition: Technical Communication Suite 2.5 (Framemaker 9.0.4 & RoboHelp HTML 8.0.2)
Hi all,
One of our new tech writers recently installed the Technical Communication Suite v2.5. I was going to show her our process for linking a Framemaker document to a new project, but when she tried to link to a book the only option she saw was to link a Word document.
She used the same install CDs as the rest of our team, then fully upgraded to Framemaker 9.0.4, and RoboHelp 8.0.2. The rest of the team sees the Link > Framemaker Document option.
I have had her restart her computer after installation. Then uninstall Framemaker and Robohelp, and finally reinstall Framemaker and Robohelp. No luck. I have seen other forum topics where the FM Document option is unavailable (grayed out), but nothing about it not appearing at all.
Any ideas? Thanks!

Did she have either FM9 or RH8 installed as point products? If so, you probably need to fully uninstall and then reinstall
-Matt
@mattrsullivan

Manage Aggregates option not appearing .

When i click on an infocube , manage aggregates option is not appearing .

HI,
Which version of BW you are using ? If you are on BW 7.3 you wont get this option.
Check new features of BW 7.3 for more details.
Thanks & Regards,
Chandra Sekhar.

File Format options not appearing in the Save As dialog box - InDesign CC

So i was working with a legacy file (an .eps from illustrator4) that i placed into InDesign CC, and when i went to export as a jpg, the option to choose a different file format from the bottom of the dialog box was gone. Did i hit some crazy shortcut to remove the options, or is this a bug that occurs when working with certain legacy files? I've restarted InDesign, rebooted my laptop, deleted my Adobe preferences, reset my adobe warning dialogs, and I still cant export or save as any other file format because the option doesnt appear. And it doesnt matter if i create a new file or open an existing one. Please help. See the pic below. No option for file format on the bottom of the dialog box.

Thank you very much!
Reinstalling worked, but i'd still kinda like to know what caused this problem & if this will continue to happen. To me, reinstalling is pretty much like having to reboot anytime you go to IT -- they dont know what the problem is, they just know how to fix/stop it.

'Install Updates and Shutdown' option not appearing for Windows 8.1 users

Windows 8.1 users are reporting, and I have verified, that they are not being prompted to install Windows updates while shutting down, even though the updates are downloaded. Here are the relevant Windows Update gpo's from a sample Group Policy Result
for a typical user on one of our Windows 8.1 workstations:
(Note: The "Specify intranet Microsoft update service location" is the last policy in the updates section, and the value specified there is not relevant to this question.)
These same settings when applied to Windows XP workstations used to prompt users to install updates at shutdown. That is, the default shutdown option was "Install Updates and Shutdown". That was a great workflow because all client workstations
were shut down every night and the user didn't have to worry about updates installing while they were using the workstation. All client workstations are now running Windows 8.1 Pro and the only way updates are getting installed is by manually pulling
up the Windows Update dialog and initiating updates from there. That is even worse than automatic updates that install during business hours.
I do notice that
a notification that updates are available appears in the login screen, but one can not take action upon it from there, and most users don't know how to find the update screen once they sign in; and
once updating is begun, then the Install Updates and Shutdown option becomes a default - but by that point its rather cosmetic: that is the only option (to configure the partially installed updates during shutdown) and there is nothing
that could be done to NOT do that at that point.
Is anyone having similar issues? As far as I can tell right now, there is no ability to actually switch the user's default option to
Install Updates and Shutdown in the same way as in previous Windows editions even though the GPO is identical.

Hi,
>>Is anyone having similar issues? As far as I can tell right now, there is no ability to actually switch the user's default option to
Install Updates and Shutdown in the same way as in previous Windows editions even though the GPO is identical.
Regarding this point, the following blog may provide a good explanation.
Minimizing restarts after automatic updating in Windows Update
http://blogs.msdn.com/b/b8/archive/2011/11/14/minimizing-restarts-after-automatic-updating-in-windows-update.aspx
Best regards,
Frank Shen

Selecting Execution Target Option not appear

Similar Messages

Maybe you are looking for