Selecting more then one item in ITunes
Trying to clean up library and need to delete a number of files/items. I see that you can only command and click each individual file to select more then one but is there a easier way to do this? Want to be able to scroll over selection... then delete.
Also when you use option show duplicates this also shows the original as well as the duplicate? Is there a way to ONLY show the duplicate file. So that to would be easier to delete?
Thanks in advance.
Shift click to select multiple items from the iTunes window. Select one item then hold down the shift key and select the another item.
Show Duplicates will show both. iTunes doesn't know one from the other. No program does as far as I know. The Show Dups will show the dups - you have to decide which one is a dup. iTunes is showing you the tunes with the same names - the bit rate, kind, etc maybe different - you will need to decide which one to delete or rename.
MJ
Similar Messages
-
How do I select more then one channel to view in tdms file viewer graph panel
I have a TDMS file that I can view with the labview 2013 TDMS file viewer and I can select one signal out of 15 signals to view on the graph panel. however I would like be able to look at 2 or 3 signals
on the same graph but can't seem to be able to select more then one signal at a time. Is there a way to select more then one to view?I've modified the TDMS viewer in the past to allow selecting multple channels. It's a little bit of a pain because the tree control in the viewer only allows you to select one item. You have to edit the tree to allow multiple items. Now your selection is an array instead of a scalar. This means the rest of the code has to be updated, and the references to the tree in subVIs need to be updated. Not impossible but it takes some time. Alternativly open it in Excel with the free add-in then you can select the two columns you want and insert a graph. Not as simple for the user but using Excel, which users should be familiar with might mean users need less training on data files.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously. -
Select more than one item in a SUD listbox?
Is there a way to select more than one item in a listbox in a SUD? I can't find anything in the properties relating to that. I want to be able to select one or more items in a listbox just like I can in LabVIEW.
GeorgeI tried to do this a while back but had no luck so I took another approach. I ended up using a table instead of a listbox. Here is a link to my posting a while back. Brad's example worked well for me.
http://forums.ni.com/ni/board/message?board.id=60&message.id=1711&query.id=0#M1711
Good luck,
AJL -
How to create a service call for more then one item
Hi All,
How to create a service call for more then one item. i.e. the service call should be logged for more then one itemAs you noticed this is not possible by design.
Maybe you could have a dummy item for that purpose and register the real items to be handled in a UDT...
HTH -
Hi...how do I select more then one song at a time?
Thanks!You hold the "Ctrl" key while clicking the songs you want highlighted OR if you want to select a whole group in a list, Just Highlight the first song, hold the shift key then select the last song in the list/group
-
Issuing more then one item in free goods
Hi SD gurus,
My client is asking to issue more then two items as free goods along the main item. Example material A is sold along with material B and C as free goods.As far as my trails, I'm able to configure only one item as free goods but not the second one. Can any one suggest to configure the above scenario?Hi Ravi krishna,
Free goods can only be supported on a 1:1 ratio. This means that an order item can lead to a free goods item. if you want to give free goods X & Y for material A, then you need to enter material Y in order, simply change the item category as TANN.
As of my knowledge there is no alternative to it.
these are the constraints for free goods:
Free goods are not supported in combinations with material structures (for example, product selection, BOM, variants with BOM explosion).
Free goods are only supported for sales orders with document category C (for example, not quotations).
Free goods are not supported for deliveries without reference to a sales order.
regards
Sunil -
How can we select more than one item from LOV in Query_Find form?
Hi,
I have a requirement i.e i want to select more than one customer number seperated by comma from the customer number lov field in the query_find form.How can we write the code for this requirement?
and after clicking find it has to display notification form which contains the details of customer which you selected from Custome query_find form.
Could you please help me out.
Thanks in Advance,
DhanaFound the "Search Entire Library" option - click on the small (VERY small for my eyesight) down arrow next to the magnifying glass. Also need to select "Filter by: Songs", and then the songs in the main window show the results.
I'm going to leave this up on the board because 1) in case someone else has this question, and 2) I don't know how to delete it anyway. -
Select more then one row in value help (multi selecting)
Hi Everybody,
how is it possible to configure a value help, so that the user can choose more then one row?
regards
Sid
Edited by: sid_mopo on Mar 6, 2009 11:54 AMHi Lekha,
i have a textedit UI-Field with a value help on it. After clicking on the value help there appears a value help table. At this point the user shold have the possibility to choose/mark more then one row. How can i give the user the possibilty to choose more then one row.
At this time only one row can be selected by a user.
regards,
Sid -
Can I select more then one project to process
I have created several different prjects within FCPX and now want to process them so that I can use them in other Apple applications i.e. IDVD. can I select more the one project to process or do I have to wait for each individual one to finish before selecting a second one to process.
Unfortunatley there is no batch export function in FCP. An excellent feature request. Please use feedback from the FCP menu to add your name to the list of those asking for this.
-
Selecting more then one message.
The iPad commercial show multiple messages being selected and then all opened at the same time. (looks to stack them all a little unevenly)
How did they do that?Same problem here... Yahoo pushes just fine on my iPhone but on the iPad there is not even a option to select push just fetch or manual. I set up a mobile me account and that pushes just fine. So maybe its Yahoo? It isn't that much of a problem i sopose since i hear on my iphone that i have mail then just check it on my iPad. It just seems strange that it is not working.. Oh and as for the multiple messages being selected there not being opened thats how you either delete them or move them to a different folder. just hit the edit button.
-
Can u select more then one" Draw Ap Div"?
Hello All
My background has an image inside a "draw Ap Div". I have 20
images on top of that (all 20 inside their own Ap Div). I need to
move all 20 of the images downward. Is there a way I can select
only the 20 images that are on top of my background image without
doing them one by one? Is it possible to lock down my background
image that is nested inside the AP Div. and only select my 20 image
so they can be moved downward together?
CS3 Mac user
thanks
why_atl"Why_ATL" <[email protected]> wrote in
message
news:gga335$e40$[email protected]..
> Hello All
> My background has an image inside a "draw Ap Div". I
have 20 images on
> top of
> that (all 20 inside their own Ap Div). I need to move
all 20 of the
> images
> downward. Is there a way I can select only the 20 images
that are on top
> of my
> background image without doing them one by one? Is it
possible to lock
> down my
> background image that is nested inside the AP Div. and
only select my 20
> image
> so they can be moved downward together?
Sounds like a nightmare approach.
Anyway... wrap a positioned div around your 20 AP divs. That
way the divs
will be positioned relative to it. Then you can position just
that one div
how you like.
BTW, you also don't need to place images in divs in order to
absolutely
position them; you can position the images themselves.
But you're going to want to change your approach, I can
guarantee you.
Absolute positioning is far more trouble than it's worth, 19
times out of
20.
tim
http://www.pactumweb.com -
Since iTunes 7 can't import more then one song at a time
When I use File> Add file to library, I can no longer import more then one song. If I select more then one file, iTunes wont import anything. I have my music download to my main iTunes folder, therefor I dont want to use add a folder, also there often is other songs I dont want to import at that time. I can drag and drop from explorer, but its annoying.
Not a terrible bug, but another in the long list for iTunes 7.
custom Windows XP Pro P4 2.8, 1 Gig Ram, Radeon x1600pro, Asus moboThanks Rachyl, I'll try that when I get off of work. What about the album art? How can I make sure I get it every time in the future. Can I rip my CD's using another software to make sure they are tagged right?
BTW I used to live in NC not too long ago and went to school there....GO HEELS! -
How to use 'BAPI_GOODSMVT_CREATE' for more then one row selected ???
Hi,
I am using bapi , BAPI_GOODSMVT_CREATE , my requirement is that first perform ALV display with check boxes & then user can selsct any number of rows & then on clicking execute button this bapi is triggered , now my ques is that if i am selecting rows one by one & executing , then am able to post data successfully, but if am selecting more then one row at a time then its giving me error
" exactly one serial no must be selected (instead of more then two / three ) ."
plz help me .
this is how i am filling data in BAPi & bapi call
FORM FILL_BAPIDATA .
wa_GOODSMVT_HEADER-PSTNG_DATE = sy-datum.
wa_GOODSMVT_HEADER-doc_DATE = sy-datum.
wa_goodsmvt_code-gm_code = c_gmcode.
LOOP AT it_final INTO wa_final.
wa_GOODSMVT_ITEM-MOVE_TYPE = c_movtype. " '313'.
wa_GOODSMVT_ITEM-material = WA_final-MATNR.
wa_GOODSMVT_ITEM-ENTRY_QNT = wa_final-verme.
wa_GOODSMVT_ITEM-plant = WA_final-WERKS. "'DB10'.
wa_GOODSMVT_ITEM-STGE_LOC = WA_final-LGORT.
wa_GOODSMVT_ITEM-BATCH = WA_final-CHARG.
wa_GOODSMVT_ITEM-BATCH = l_charg.
append wa_GOODSMVT_ITEM to IT_GOODSMVT_ITEM.
clear: wa_GOODSMVT_ITEM.
ENDLOOP.
LOOP AT it_final INTO wa_final.
wa_serialnumber-SERIALNO = wa_final-sernr.
APPEND wa_serialnumber to it_serialnumber.
CLEAR wa_serialnumber.
ENDLOOP.
LOOP AT it_position2 INTO wa_position2.
wa_serialnumber-MATDOC_ITM = wa_position2-wepos .
MODIFY it_serialnumber INDEX sy-tabix from wa_serialnumber TRANSPORTING MATDOC_ITM .
ENDLOOP.,
data: begin of mthead.
include structure bapi2017_gm_head_ret.
data: end of mthead.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
GOODSMVT_HEADER = wa_GOODSMVT_HEADER
GOODSMVT_CODE = wa_GOODSMVT_CODE
IMPORTING
GOODSMVT_HEADRET = mthead
MATERIALDOCUMENT = w_MATERIALDOCUMENT
MATDOCUMENTYEAR = w_MATDOCUMENTYEAR
TABLES
GOODSMVT_ITEM = IT_GOODSMVT_ITEM
GOODSMVT_SERIALNUMBER = IT_SERIALNUMBER
RETURN = IT_RETURN
GOODSMVT_SERV_PART_DATA =
EXTENSIONIN =
APPEND w_MATERIALDOCUMENT to it_GOODSMVT1 .
IF sy-subrc = 0 .
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
*MESSAGE text-016 TYPE 'I'.
PERFORM msg_log .
ENDIF.Hi,
Did u check the serial numbers table before calling the BAPI. Might be the case tht same serial number is assigned for all items, in this case the goods movement may be possible with same serial number for all items.
Reagrds,
Aditya
Edited by: aditya on Aug 11, 2009 11:46 AM -
How can i select more than one song from drop down search bar
sometimes to make a playlist i will search my music library for a word & then add all the songs with that word in the title
the drop down search bar will not allow me to select more than one song
or
will it? & i just can't suss out how... maybe you know?
if so, please tell me~!!!
thank youhey i tried that before i posted this question... i tried all of the normal ways one would use to select more than one item...
any click of any kind at all takes you out of the search drop down & into the main itunes window... where you are deposited back into the songs alphabetically... no longer are you seeing the results of the search...
sigh
at the risk of sounding like one of those people, the "old" itunes did not have this problem...
grrrr... it seems to be that pesky drop down menu~ if only you could see the search results in the main list as opposed to only in the drop down thing -
How could I select more than one file in a dialog?
Hello NG,
is it possible by using a "file path - frontpanel element" to configure
the dialog for the possibility of selecting more then one file? The
return should be an array. At the moment, I am only able to choose one
file or a whole directory. But I want to select different files of
different directories and do not want to reopen the "file path dialog
box" continously.
Thanks a lot for your help.
Best regards,
MichaelHere's an example that uses the program you download from here. I also used a Boolean with the file browse icon that I got from OpenG. If you want, you can also check out this thread.
Maybe you are looking for
-
Macbook Pro 2011 extremely slow wondering if hard drive failure
Hello, I want to start off by saying I'm not a huge computer guru, so that is why I'm coming here first. My Macbook Pro worked very well for a year, and then it has slowed down drastically. I've always been a windows user so mac is kind of foreign to
-
Query: How to add new fields in ABAP query?
Hi All, Can any one tell me how to add new fields in the ABAP query output? We have to add the new fields using query design or we have to add those in the background program(automatically generated behind query) by selecting new fields in the code?
-
I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?
-
Create outbound delivery with reference to purchase order
Hi, I've created new plant and when i make purchase order i cant see the PO in VL10B, and there for i cant create outbound delivery. In the PO in Item Detail there is no shipping category. What i need to do ? Thank you.
-
I have had my Macbook for about a month & everything has been working perfectly. Today I had to change my Apple ID password & now my iMessage & my Facetime aren't connected to my Mac. When I go to iMessage it says everyone is offline & when I try to