Selecting multiple tabs not working anymore

Selecting multiple tabs e.g. by using Shift-<left mouse buttom>
used to work in Firefox 7 and I enjoyed it a lot. I.e. for closing
multiple tabs at once.
This doesn't seem to work anymore in Firefox 8.

Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

Similar Messages

  • Opening multiple tabs not working, network hangs

    Like the title says, when I open multiple tabs at once Safari hangs my network. Maybe two of tabs are loaded the others are stopped in the middle...and the whole network hangs...

    Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found

  • Keyboard Shortcut to Select Next Tab not working

    Hello. Somewhat similar to this issue (http://discussions.apple.com/message.jspa?messageID=11414081#11414081), the keyboard shortcut to select the previous / next tab in Safari isn't working in (my) 10.6.3. What is it with this system, or what fundamental thing am I missing, that these different key shortcuts aren't working?
    Thanks again

    HI,
    Try Resetting the PRAM
    Carolyn

  • Single task flow with multiple tabs not working properly in UIShell

    Hi,
    I am using the UIShell Dynamic tabs concept. Here am creating the task flow with a fragment which am binding to the backing bean. if am trying to open the same task flow in two tabs.the getter of backing bean are calling for both tabs when am opening the second tab.
    Please provide me any solution or why backing bean getter is firing for the first tab even i opened the second tab.
    Reg,
    Brahma B.

    There are a few problems that I have noticed so far.
    Line #1 <!doctype html5> is not recognised, hence the page will revert back to HTML 4.01 Transitoinal. It should read <!doctype html>
    Line #51 (links to) style rules should be placed in the <head> element, not in the <body> element
    Lines #124, #159 and #188 all link to the same JS file. Delete two of them.
    Lines #126, #161 and #207 contain a constructor for the same widget. The former two should be deleted.
    Lines #190 and #208 contain a constructor for the same widget. The former should be deleted
    Although JS can be placed anywhere in a document, I tend to place all JS at the bottom, just above the ending body tag (</body>) unless the JS is required for rendering purposes in which case it should be placed where it is required. This way, you can keep check of what you have linked to and which constructors you have created thus eliminating the problems mentioned above.
    Also you might like to have a look at a collapsible panel group http://labs.adobe.com/technologies/spry/samples/collapsiblepanel/CollapsiblePanelGroupSamp le.html. This will simplify the code somewhat.
    Gramps

  • Sync Photo Selected folders option not working anymore in iTunes 10

    I used to sync selected subfolders with photos using iTunes on my AppleTv
    Now no matter what I select it copies the whole root directory
    As workaround I had to create a new folder with all the subfolders I wanted and use the all folders options
    Message was edited by: Interceptor121

    Yes, I have the same - I now have to select File > Devices > Transfer Purchases from "iPhone" to acheive this.
    I think it's a known "feature"
    Regards,
    Shawn

  • Automatic Selected Item of List Builder Component Does not work (anymore)

    Hi all,
    Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
    Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
    This are my settings of the list builder component (which was running correctly earlier..):
    -at the general tab I defined a range of labels
    -at the general tab I defined 2 data column insertion series
    -at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
    -all of the data comes from an external xml data source
    You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
    I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
    Greetings Erik-Jan Vriens

    Hi njnits,
    Print view button is a standard component of Xcelsius: look at it in the IDE
    Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
    All visualisations, not only the table,  in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
    The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
    Hopes this info helps....

  • Select end (Shift+End) in Dreamweaver (MAC) not working anymore

    Hi all,
    all of a sudden it seems that my DreamWeaver shortcut Shift+End is not working anymore to select text till the end of the line. Shift+Home is still working. I'm pretty sure I've been using it till the day before yesterday. I noticed the shortcut not working on my macbook yesterday, but since that was a clean install I thought that might have been the issue. But today I noticed the same on my working station which has been installed for a couple of days now.
    Is anyone else facing this problem? I tried re-adding the shortcut, but that doesn't work at all..
    Joshua

    Seemed to have fixed itself.. all of a sudden it is working again..    

  • I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

    I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

    Go to Finder > Preferences then select the General tab
    Make sure External disks is selected.

  • Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million :)

    Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million

    Try troubleshooting the Safari .plist file.
    Quit Safari.
    Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
    Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Relaunch Safari. Try a bookmark.
    If that didn't help, check Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, quit then relaunch Safari.
    If Extensions aren't the issue, reset Safari. From the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

  • I had somebody  work on my OS 10.9.2 to speed it up. He failed and now  Preview, Textedit, App Store, Mail and Contacts  do not work anymore. I can still use Safari, Firefox and iPhoto etc. How do I get it fix I can still use Safari, Firefox and ed again?

    I had somebody  work on my OS 10.9.2 to speed it up. He failed and now  Preview, Textedit, App Store, Mail (crashes) and Contacts  do not work anymore. I can still use Safari, Firefox, Word, Photoshop and iPhoto etc. How do I get the Apple programs fixed again?

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
         Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).
    4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Reinstall the 10.9.2 update: OS X Mavericks 10.9.2 Update (Combo).

  • X-FI Not Working Anymore...Can Anyone Help??

    ,X-FI Not Working Anymore...Can Anyone Help?e Ok, so first off here are my comp specs...
    E8400 @ 3.8
    2 x eVGA 9800GTX's SLI'ed
    WD 320 Gb main dri've
    2 x Raptors in RAID 0
    2 x 2 Gb Patriot Blade Ram @ 600 DDR3
    X-FI XtremeGamer Fatality Pro
    Logitech X-540 speakers
    Vista 32-bit HP
    I've had this setup for about a year with no hiccups whatsoever. Today, I decided to update the driver for my soundcard and now I have no sound at all. I installed the latest driver and console. Device Manager shows the correct driver being installed. If I try and open either control panel it tells me there isn't a compatible device hooked up. I never disconnected my speakers or pulled my soundcard either. Can anyone tell me what is going on? I'm really confused and pissed off at this point. Any help would be greatly appreciated.

    TRy deleting and re-installing the FB app on your iPhone. You can deselect the app under the Applications tab for your iPhone sync preferences with iTunes followed by a sync to remove the app from your iPhone. When the sync is completed, re-select the app followed by a sync to re-install the app on your iPhone.
    If no change after doing so, try contacting FaceBook customer or technical support regarding the problem you are having with their app on your iPhone.

  • Enter key does not work anymore in address bar after FF update

    After the update the Enter key does not work anymore. Neither when I type the url directly, nor when I select it from the history.
    In short FF has become unusable. Now I need to install and use a less crappy browser. Extremely sloppy, amateuristic update.

    see if this is helpful : go to Tool > Options > Advanced > General tab > Browsing and '''Uncheck''': "Use hardware acceleration when available" .

  • Itunes is not working anymore!!

    Hello all,
    since a month my Itunes is not working anymore.
    I don't know whats wrong with it but all of a sudden it's not working anymore. When I start it my computer sais: There is an fault in Itunes and it has to be closed.
    I really hope u guys can help me.

    I noticed this recently too. Either you see "No artwork available" or, if you select multiple items, the box says something like "Multiple items selected." But other times it says "Drag artwork here." I can't make sense of it.
    Rest assured you can still drag/drop. There is no need to save the picture first. The trick is to drag/drop onto the artwork box in the Get Info window instead of the left corner of iTunes.

  • TV does not work anymore on Qosmio G10

    Good morning,
    TV does not work anymore, may be due to an update. It has been working OK before.
    When selecting TV option 'TV direct ' with MCE menu, I get the following error message: "necessary files for video display are not installed or do not work properly, restart MCE or the computer". Restarting MCE and / or G10 does not solve the problem.
    -Intervideo WinDVD creator is installed.
    -TV PCI tuner seems to work properly (as per hardware status)
    Which files can be missing? What needs to be done?
    Any help, suggestions, well appreciated.
    Thank you to anyone answering this message.

    Hello Luciano
    Like you know on this way it is not easy to give you precise answer because we dont know what did you done exactly with your Qosmio.
    Please try to use System restore tool at first and roll back the operating system to earlier time. Maybe this will help you and the MCE configuration will be as before.
    Try it at first.

  • Is there a way to select MULTIPLE tabs and then copy ALL of the the URLs and titles/or URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; However, I prefer to use a Firefox feature rather than download an add on. Thanks.

    Currently, I can copy ONE tab's url and nothing else (not its name). Or I can bookmark all tabs that are open. However, I'd like to have the ability to select multiple tabs and then copy ALL of the the URLs AND their titles/or copy ALL of the URLs+titles+HTML links? This can be done with the Multiple Tab Handler add on; when I download the add on, I get a message saying that using the add on will disable Firefox's tab features. I prefer to use Firefox features rather than download and use an add on. Is there a way to do this without an add on?

    Hi LRagsdale517,
    You should definitely be able to upload multiple files by Shift-clicking or Ctrl-clicking the files you want to upload. Just to make sure you don't have an old version of the service cached, please clear the browser cache and then log in to https://cloud.acrobat.com/files. After clicking the File Upload icon in the upper-right corner, you should be able so select multiple files for upload.
    Please let us know how it goes.
    Best,
    Sara

Maybe you are looking for