Selecting objects in multisim

I was going along happliy creating a schematic but then after a couple of copy and pastes suddenly many of the components were being selected in a very strange way. Instead of the usual blue box around the componment I just clicked on, I get a very large selection box that encloses a bunch of components and trails off the side of the sheet on to infinity. This behaviour also occurs when components are individually selected with the spreadsheet view.
Not just the last couple cut and pastes were bad but all of the objects I placed today many of which seemed fine moments before the bug bit. Objects I placed yesterday and on other sheets I didn't work on today seem unaffected, that is I can select things one by one.
I tried closing the program and restarting, no luck. I tried "Save As" to another file name but same bug in that file also. I suppose I can try to salvage what I can with cut and paste to a new sheet and then redraw from scratch what I did today but I was hoping there was a better way than to loose a couple hours to file corruption bug.
Any Advice on how to recover this file. I'm using the latest version of MultiSim. I've deleted most of my pages and attached the buggy one here. The effected components are on the right hand side of the sheet. I'll work on another sheet for now.
Attachments:
defective circuit1.ms10 ‏665 KB

I can't figure out what got you into this Multisim behavior, but what I can easily see is that what's causing it is that you have labels (and a couple of components) way beyond the boundary of the sheet. Especially having the component symbol inside the sheet, but the label way far beyond the sheet boundaries create this huge selection box.
There are several ways you could fix this... the most effective ones in my opinion would be:
1. With the mouse, click outside the sheet boundaries and every time you get a huge selection box, delete it. This will obviously delete the corresponding or associated component with that box, so you'll need to add it back.
2. Same way, but instead of deleting them, try dragging the box into the sheet, after doing this you'll notice very tiny labels or components approaching the sheet (you are as zoom-out as possible for this). However, still with this option something is weird with the components.
3. The other option is yes, copy/paste components into a new sheet.
In order to avoid this, make sure that when you are going to copy a component you select the symbol of the component, and not just only the label, RefDes, or any attribute. On either case, the way I would suggest you to copy components is to use the In-Use List, you find it usually in the top-right corner of your toolbar section.
Nestor
National Instruments

Similar Messages

Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?

No one else had this?

Unable to remove a host from VMM - Error (2606) Unable to perform the job because one or more of the selected objects are locked by another job.

I am unable to remove a host from my Virtual Machine Manager 2012 R2. I receive the following error:
Error (2606)
Unable to perform the job because one or more of the selected objects are locked by another job.
Recommended Action
To find out which job is locking the object, in the Jobs view, group by Status, and find the running or canceling job for the object. When the job is complete, try again.
I have already tried running the following command in SQL Server Management Studio
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
I received this error back:
Msg 8169, Level 16, State 2, Line 1
Conversion failed when converting from a character string to uniqueidentifier.
I have also tried rebooting both the host and the Virtual Machine Manager Server. After rebooting them both, I still receive the same error when trying to remove the host.
Here are my server details
VMM Server OS = Windows 2012 Standard
VMM Version = 2012 R2 3.2.7510.0
Host OS = Windows 2012 R2 Datacenter
Host Agent Version = 3.2.75.10.0
SQL Server OS = Windows 2012 Datacenter
SQL Version = 2012 SP 1 (11.0.3000.0)

Hi there,
How many hosts are you managing with your VMM server?
The locking job might be the background host refresher job. Did you see any jobs in the jobs view, when the host removal job failed?
If there is no active jobs in the jobs view when this host removal job fails, can you please turn on the VMM tracing, retry the host removal, and paste back the traces for the failed job (search for exception and paste the whole stack)?
Thanks!
Cheng

Script to apply a random CMYK swatches from a group of swatches to selected objects.

I would like to write some scripts for randomising the allocation of swatches to adjacent object.
Example:
Imagine a map of Europe and all her nation states/territories. I have a User Defined Swatch Library. I can open the AI document it was made from as I understand from this thread that having the swatches as objects on the page makes them easier to be referenced in a script.
I want to iterate through the selected objects and randomly assign one of the colours in the swatch document as a fill to each object. It would be great if hidden swatches (they are all small rectangular 'colour chip' filled paths) on page were not included in the reference swatches randomly choosen from.
Iterating the selected objects I can do, but not sure what references I need to use to create an array of swatches to randomly choose from.
I see I can make an array of swatches using the general swatch group from Adobe's CreateSwatchGroup scripts:
JS
var docRef = app.documents.add(DocumentColorSpace.CMYK)
// Create a new SwatchGroup
var swatchGroup = docRef.swatchGroups.add();
swatchGroup.name = "CreateSwatchGroup";
// Get list of swatches in general swatch group
var genSwatchGroup = docRef.swatchGroups[0];
// Collect 5 random swatches from general swatch group and move to new group
var i = 0;
while (i < 5) {
          var swatches = genSwatchGroup.getAllSwatches();
          swatchCount = swatches.length;
          var swatchIndex = Math.round(Math.random() * (swatchCount - 1)); // 0-based index
          // New swatch group does not allow patterns or gradients
          if (swatches[swatchIndex].color.typename != "PatternColor" && swatches[swatchIndex].color.typename != "GradientColor") {
                    swatchGroup.addSwatch(swatches[swatchIndex]);
                    i++;
// Updates swatch list with swatches moved to new swatch group
swatches = swatchGroup.getAllSwatches();
// [… etc etc]
AS
tell application "Adobe Illustrator"
activate
          set docRef to make new document with properties {color space:CMYK}
-- Create a new SwatchGroup
          set swatchGroupRef to make new swatchgroup in current document with properties {name:"CreateSwatchGroup"}
-- Get list of swatches in general swatch group
          set genSwatchGroup to swatchgroup 1 of docRef
-- Collect 5 random swatches from the general swatch group and move to new group
          set i to 0
          repeat until i is 5
                    set swatchesRef to get all swatches genSwatchGroup
                    set swatchCount to count every item in swatchesRef
                    set swatchIndex to random number from 1 to swatchCount
                    set currentSwatch to item swatchIndex of swatchesRef
-- New swatch group does not allow patterns or gradients
                    if class of color of currentSwatch is not pattern color info and class of color of currentSwatch is not gradient color info then
add swatch swatchGroupRef swatch currentSwatch
                              set i to i + 1
                    end if
          end repeat
-- [… etc etc]
If someone can help me to create the Swatch Array object of swatches loaded from a seperate document (or unique layer) then I think I can work my way to changing the fill on the existing paths (the nations in my map of Europe example).
Would be very cool if I could detect neighbooring paths (nieghbooring nations in my map of Europe example) make sure the colour being assigned is not within a certain hue/CMYK range of the random colour and if it is rechoose random colour. I have no idea how to perform the logic of determining neighbooring paths in an Illustartor script. Anybody?!
I'd prefer Applescript for sake of readiblity and also I'm learning AS ATM. Plus I'm using Script Debugger.app (which is excellent) to work with AS and I can't seem to run JSX scripts from within Extend Script Toolkit 2 (perhaps I need to make my scripts point to Illustrator?)
But Javascript is okay if someone has this covered already :-)

I would like to write some scripts for randomising the allocation of swatches to adjacent object.
Example:
Imagine a map of Europe and all her nation states/territories. I have a User Defined Swatch Library. I can open the AI document it was made from as I understand from this thread that having the swatches as objects on the page makes them easier to be referenced in a script.
I want to iterate through the selected objects and randomly assign one of the colours in the swatch document as a fill to each object. It would be great if hidden swatches (they are all small rectangular 'colour chip' filled paths) on page were not included in the reference swatches randomly choosen from.
Iterating the selected objects I can do, but not sure what references I need to use to create an array of swatches to randomly choose from.
I see I can make an array of swatches using the general swatch group from Adobe's CreateSwatchGroup scripts:
JS
var docRef = app.documents.add(DocumentColorSpace.CMYK)
// Create a new SwatchGroup
var swatchGroup = docRef.swatchGroups.add();
swatchGroup.name = "CreateSwatchGroup";
// Get list of swatches in general swatch group
var genSwatchGroup = docRef.swatchGroups[0];
// Collect 5 random swatches from general swatch group and move to new group
var i = 0;
while (i < 5) {
          var swatches = genSwatchGroup.getAllSwatches();
          swatchCount = swatches.length;
          var swatchIndex = Math.round(Math.random() * (swatchCount - 1)); // 0-based index
          // New swatch group does not allow patterns or gradients
          if (swatches[swatchIndex].color.typename != "PatternColor" && swatches[swatchIndex].color.typename != "GradientColor") {
                    swatchGroup.addSwatch(swatches[swatchIndex]);
                    i++;
// Updates swatch list with swatches moved to new swatch group
swatches = swatchGroup.getAllSwatches();
// [… etc etc]
AS
tell application "Adobe Illustrator"
activate
          set docRef to make new document with properties {color space:CMYK}
-- Create a new SwatchGroup
          set swatchGroupRef to make new swatchgroup in current document with properties {name:"CreateSwatchGroup"}
-- Get list of swatches in general swatch group
          set genSwatchGroup to swatchgroup 1 of docRef
-- Collect 5 random swatches from the general swatch group and move to new group
          set i to 0
          repeat until i is 5
                    set swatchesRef to get all swatches genSwatchGroup
                    set swatchCount to count every item in swatchesRef
                    set swatchIndex to random number from 1 to swatchCount
                    set currentSwatch to item swatchIndex of swatchesRef
-- New swatch group does not allow patterns or gradients
                    if class of color of currentSwatch is not pattern color info and class of color of currentSwatch is not gradient color info then
add swatch swatchGroupRef swatch currentSwatch
                              set i to i + 1
                    end if
          end repeat
-- [… etc etc]
If someone can help me to create the Swatch Array object of swatches loaded from a seperate document (or unique layer) then I think I can work my way to changing the fill on the existing paths (the nations in my map of Europe example).
Would be very cool if I could detect neighbooring paths (nieghbooring nations in my map of Europe example) make sure the colour being assigned is not within a certain hue/CMYK range of the random colour and if it is rechoose random colour. I have no idea how to perform the logic of determining neighbooring paths in an Illustartor script. Anybody?!
I'd prefer Applescript for sake of readiblity and also I'm learning AS ATM. Plus I'm using Script Debugger.app (which is excellent) to work with AS and I can't seem to run JSX scripts from within Extend Script Toolkit 2 (perhaps I need to make my scripts point to Illustrator?)
But Javascript is okay if someone has this covered already :-)

Indesign CS3: How to get the UID of the selected object?

Hello,
How can I get the UID of the selected object in an document?
Thanks,
Alois Blaimer

Hello!
I do not get it. Please give me some more hints.
I only want to know if the selected object is a square and then the UID of the selected square.
Thanks,
Alois Blaimer

Querying for a script insert multiple selected objects...

Is there a script or plugin which insert multiple selected objects in one new text frame with one click?
And is there a script or plugin which extract the content of anchored text frame out it's frame and replace it with it's frame. and extract selected text and insert it inside a new anchored text frame in it's place? (like convert text to table - convert table to text, but instead table we use text frame)

Hi,
Using OMB scripting to set attribute properties in a data mapping sort of defeats the purpose of utilizing a graphical user interface to define and set properties for a data mapping? Surely the GUI data mapping tool was created to get away from writing scripts and scripting would also require that you know the name of the data mapping, table operator and the set of attribute names for which you have to write one line of script to set each property value, i.e. 90 lines to set 90 attribute values.
Cheers,
Phil

Select Object Tool Adobe Pro 9.0

Can someone please help me. My "Select Object Tool" under Tools, Advance Editing is greyed out. Does any one know how to activate it?
Thank you in advance
[email protected]

Are there any security settings on the document?

Create a new object that surrounds the selected objects

Is there anyway in illustrator to create a new vector object from selected objects?
IE if i have three rectangles selected, can I make a new vector path that surrounds them all.
I dont mean welding a group of vectors together or offsetting a path...which isnt exactly what i need.
What Im needing to do is create cut lines around complex vector art quickly.
Thanks in advance.

Mike i need to make an outline around a logo but if the logo has many elements that make up the edge of the logo does that method work?
As the cut line needs to be a closed path
Ideally i want to avoid tracing around the logo with the pen tool or add to shape area in pathfinder tab.
I sure theres a really easy way to do this.
Kurt its an interesting discussion however in need a closed path to surrond artwork and live paint does just the opposite :)

Resizing selected objects

Ok, so I am trying to write a script that resizes an object that is selected. I have two objects selected, the one on top is a group item, the one below it is a rectangle. I am trying to resize the rectangle to the size of the group item on top of it with a little margin around it. Here is what I have so far.
var design = app.activeDocument.selection[0];
     var top=design.visibleBounds[1]+5*2;
     var left=design.visibleBounds[0]-5*2;
     var width=design.visibleBounds[2]-design.visibleBounds[0]+10*2;
     var height=design.visibleBounds[1]-design.visibleBounds[3]+10*2;
var background = app.activeDocument.selection[1];
background.position = (top, left, width, height);
The problem is the last line there. I'm not sure how to manipulate the position/size of the selected object or if it is even possible I have searched for it and haven not found an answer. Thanks in advance!

position property expects an Array, with x and y values, in that order. As for the width and height properties, use them in separate statements
background.position = [left, top];
background.width = width;
background.height = height;

Script to align selected objects to artboard

Hello, I was wondering if anyone had a simple solution to aligning selected items to the artboard. I was going to create an action but then realized it would be more convenient for me to include it in my script file....I have a script to align objects with each other but they dont align to the artboard. Any suggestions?

Hello volocitygraphics,
here is a quick&dirty solution.
Note that the result may be different, if clipping masks are exists in the document.
Please test it at first on copies of your documents. Use it on your own risk.
// ArtboardCenterAroundSelectedPaths.jsx
// works with CS5
// http://forums.adobe.com/thread/1336506?tstart=0
// (title: script to align selected objects to artboard)
// quick & dirty, all selected items will be centered at the active artboard
// (include clipping paths !visible result can be different)
// regards pixxxelschubser 19.Nov. 2013
var aDoc = app.activeDocument;
var Sel = aDoc.selection;
if (Sel.length >0 ) {
    var abIdx = aDoc.artboards.getActiveArtboardIndex();
    var actAbBds = aDoc.artboards[abIdx].artboardRect;
    var vBounds = Sel[0].visibleBounds;
    vBounds_Li = vBounds[0];
    vBounds_Ob = vBounds[1];
    vBounds_Re = vBounds[2];
    vBounds_Un = vBounds[3];
if (Sel.length >1 ) {
    for (i=1; i<Sel.length ; i++) {
        vBdsI = Sel[i].visibleBounds;
        if( vBounds_Li > vBdsI[0] ) {vBounds_Li = vBdsI[0]};
        if( vBounds_Ob < vBdsI[1] ) {vBounds_Ob = vBdsI[1]};
        if( vBounds_Re < vBdsI[2] ) {vBounds_Re = vBdsI[2]};
        if( vBounds_Un > vBdsI[3] ) {vBounds_Un = vBdsI[3]};
    aDoc.artboards[abIdx].artboardRect = [vBounds_Li +((vBounds_Re - vBounds_Li)/2-(actAbBds[2]-actAbBds[0])/2), vBounds_Ob -((vBounds_Ob - vBounds_Un)/2+(actAbBds[3]-actAbBds[1])/2), vBounds_Li +((vBounds_Re - vBounds_Li)/2-(actAbBds[2]-actAbBds[0])/2)+(actAbBds[2]-actAbBds[0]), vBounds_Ob -((vBounds_Ob - vBounds_Un)/2+(actAbBds[3]-actAbBds[1])/2)+(actAbBds[3]-actAbBds[1])];
    } else {
        alert ("No selection");
I hope so, the document coordinatesystem is the same as in CS6+
Have fun

Selecting objects in a layer to copy and paste into a new doc?

How can I select all objects in a layer and copy and paste the objects into a new document? We are having issues with the copy and paste method. Is this because it uses the operating systems clipboard?

the sample I mentioned describes how to duplicate all selected objects in a document, using
var docSelected = app.activeDocument.selection;
it is usually not advice to use the selection for this kind of stuff, to work with ALL pageItems in a document use
var allPageItems = app.activeDocument.pageItems;
now if you only want to copy items in a layer you can use either the index number (for instance, top layer index = 0) or the name of the layer (for instance "Layer1"), use this, you don't have to select them
var topLayerPageItems = app.activeDocument.layers[0].pageItems;
or using the layer name
var Layer1PageItems = app.activeDocument.layers['Layer1"].pageItems;

[Agentry] Identifying the selected object in multi-tab lists on iPad

hi all,
On iPad, we can create a multi-tab lists to group objects based on different criteria as shown below.
In my implementation, I created a Tile Display which holds a screen set called “Lists” with multiple list screens.
Once we select an object in one of the lists, we need to either display details of the it or execute some transactions on that object. Then I had difficulty to find a way to identify the selected object. Since this is a screen set inside a tile display. I first tried to see if I can drill down on the tile display.
As shown above, I cannot go further on the tile display.
Then I tried to see if I can find the object on the “Lists” screen set. There are four screens each of which has “selected object” option. During the application’s execution, the user may switch between lists/tabs. Is there any method we can figure out which tab/screen the user is currently on? With that piece of information, I can identify the screen and then the object accordingly.
My development environment is 6.0.42 and iOS 7.1.
If this is not correct way to accomplish such function, is there any work around available to present a workable multi-lists tile on iPad?
Thanks a lot.
-Yang

Jason,
My following question might be a bit off the original topic. Please let me know if you want me to open a new post.
I actually tried the navigation as well as the list selection. The navigation did happen. However, instead of presenting the Lists screen in the original tile display, a new full screen is created after the navigation which covers the original screen on iPad.
This leads to a general question regarding the navigation on screen with tile display. For pocket PC, the navigation is straight forward as a new screen is going to be created to cover the original screen. On tablet, if tile display is used, is it possible to navigate to, i.e., activate the focus on, a particular screen inside a tile display?
Please let me know if I make my question clear.
Thanks a lot.
-Yang

Select objects inside a shape

Hello!
Im looking for a way to export a pattern made in Illustrator to auto cad.
I would like to select objects inside a shape based on the shape.
As you can see here i would like to select all the objects inside the blue circle, and delete everything outside of it. I dont want to use a cliping mask as it does not really destory the objects outside the
circle. Any help would be much appreciated.
/Jakob

Jakob,
You may use careful manual cutting (using Smart Guides) along the circle and grumble over the lack of easy ways to do it properly on open paths.
Or you may do the destructive deed, with the Clipping Mask selected:
1) In the Transparency palette/panel dropdown list select anything but Normal (Multiply is fine),
2) Object>Flatten Transparency, just keep the defaults including 100% Vector,
3) Shudder.
This should reduce the size to the Bounding Box of the Clipping Path.
It makes a bit of a mess out of the mesh (strokes are outlined to become filled paths); it has the (dis)advantage of cutting each path end at the actual angle of the Clipping Path (the circle).

Help too selecting object [JS]

Hi there
I am problems selecting an object by it id or label. In my script a list items on on page and if the text are using ParagraphStyleName "Itembox 9" i save it in array.
But how do i select the object by id or label ?
I have to do this to make changes on the object later.
Does anyone know about good books on indesign scripting with javascript ?
Regards
TT.
test()
function test(){
var myDocument = app.documents.item(0);
var myElement = myDocument.pages.item(0).pageItems;
var myObjectsToSelect = new Array;
for(myItemCounter = 0; myItemCounter < myElement.length; myItemCounter ++){
      var myElementID = myElement[myItemCounter].id;
   try {
    var myTextParagraphStyleName = myElement[myItemCounter].parentStory.appliedParagraphStyle.name;
       if(myTextParagraphStyleName == "item_box_9"){
           $.writeln("Element Id ", myElementID);
          var myTextContents = myElement[myItemCounter].contents;
         $.writeln("Text ", myTextContents);
         myObjectsToSelect.push(myElementID);
      catch (Error) {
// error

In contrast with the interface, in scripting you rarely need to select objects in order to do something with them. You collect certain text frames in your array myObjectsToSelect. If e.g. you want to move them, you'd do something like this:
for (i = 0; i < myObjectsToSelect.length; i++)
    myObjectsToSelect[i].move (...);
What do you want to do with them?
Peter

CS3: elements sorting of selection object

Hi people!
I think U know that in CS2 app.selection[0] always return LAST selected object
and app.selection[app.selection.length] return FIRST selected object
its logically good way.
but in CS3 Adobe changed this order. And now sorting of objects in this array depend not from selection order.
now question: how to determine the first and last selected object in CS3?
Му collection of cs2 scripts be based on this behoviour.
Did anybody know how to solve this problem. May be exist simple way via javascript? Or harder - via third party plugins...
Help please!

>now question: how to determine the first and last selected object in CS3?
Unfortunately, you can no longer do that in CS3. I don't know of any workarounds.
Peter

Selecting objects in multisim

Similar Messages

Maybe you are looking for