Selecting Row from Rowset

I have a rowset (table) displayed, and I want the user to be able to click on any row in the displayed table, thereby selecting that row.
I tried using a button as the component type in the table layout, but where do I extract the value from? xxxRowSet.getString("yyy") returns empty and if I grab the button lable (xxx_but.getValue().toString() ) it changes on me each time the rowset is updated.
Anyone know of a code sample, or documentation page I can look at?
Thanks,
harold

See the appModel code example -it shows a few approaches to do this:
http://developers.sun.com/prodtech/javatools/jscreator/reference/codesamples/sampleapps.html
hth,
Val

Similar Messages

Delete operation is not working to delete selected row from ADF table

Hi All,
We are working on jdev 11.1.1.5.3. We have one ADF table as shown below. My requirement is to delete a selected row from table, but it is deleting the first row only.
<af:table value="#{bindings.EventCalendarVO.collectionModel}" var="row"
rows="#{bindings.EventCalendarVO.rangeSize}"
emptyText="#{bindings.EventCalendarVO.viewable ? applcoreBundle.TABLE_EMPTY_TEXT_NO_ROWS_YET : applcoreBundle.TABLE_EMPTY_TEXT_ACCESS_DENIED}"
fetchSize="#{bindings.EventCalendarVO.rangeSize}"
rowBandingInterval="0"
selectedRowKeys="#{bindings.EventCalendarVO.collectionModel.selectedRow}"
selectionListener="#{bindings.EventCalendarVO.collectionModel.makeCurrent}"
rowSelection="single" id="t2" partialTriggers="::ctb1 ::ctb3"
>
To perform delete operation i have one delete button.
<af:commandToolbarButton
text="Delete"
disabled="#{!bindings.Delete.enabled}"
id="ctb3" accessKey="d"
actionListener="#{AddNewEventBean. *deleteCurrentRow* }"/>
As normal delete operation is not working i am using programatic approach from bean method. This approach works with jdev 11.1.1.5.0 but fails on ver 11.1.1.5.3
public void deleteCurrentRow (ActionEvent actionEvent) *{* DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcItteratorBindings =
bindings.findIteratorBinding("EventCalendarVOIterator");
// Get an object representing the table and what may be selected within it
ViewObject eventCalVO = dcItteratorBindings.getViewObject();
// Remove selected row
eventCalVO.removeCurrentRow();
it is removing first row from table still. Main problem is not giving the selected row as current row. Any one point out where is the mistake?
We have tried the below code as well in deleteCurrentRow() method
RowKeySet rowKeySet = (RowKeySet)this.getT1().getSelectedRowKeys();
CollectionModel cm = (CollectionModel)this.getT1().ggetValue();
for (Object facesTreeRowKey : rowKeySet) {
cm.setRowKey(facesTreeRowKey);
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData();
rowData.getRow().remove();
The same behavior still.
Thanks in advance.
Rechin
Edited by: 900997 on Mar 7, 2012 3:56 AM
Edited by: 900997 on Mar 7, 2012 4:01 AM
Edited by: 900997 on Mar 7, 2012 4:03 AM

JDev 11.1.1.5.3 sounds like you are using oracle apps as this not a normal jdev version.
as it works in 11.1.1.5.0 you probably hit a bug which you should file with support.oracle.com...
Somehow you get the first row instead of the current row (i guess). You should debug your code and make sure you get the current selected row in your bean code and not the first row.
This might be a problem with the bean scope too. Do you have the button (or table) inside a region? Wich scope does the bean have?
Anyway you can try to remove the iterator row you get
public void deleteCurrentRow (ActionEvent actionEvent) { DCBindingContainer bindings =
(DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dcItteratorBindings =
bindings.findIteratorBinding("EventCalendarVOIterator");
dcItteratorBindings.removeCurrentRow();Timo

Need sample code to get handle of Selected rows from ADF Table

Hi,
I am new to ADF. I have an ADF table based on VO object.On some button action,I need to get handle of selected rows in application module.
If anybody is having sample code to do this then please share with me.
Thanks,
ashok

wow now link http://blogs.oracle.com/smuenchadf/examples/#134 is working.thanks a lot.
also the link http://baigsorcl.blogspot.com/2010/06/deleting-multi-selected-rows-from-adf.html is very useful. Thanks a lot for Sameh Nassar too.He made it clear that in 11g Select column is not available for a ADF table and provided a solution to get Select column.
Thanks,
ashok

How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

Getting the Selected Row from a JTable

hi,
how Can i get the Selected row from a JTable
thanks...

You know that JTable class? Well, you see those methods in it called "getSelectedRow()" and "getSelectedRows()"...?

How to select rows from database like 10 to 20 etc

Hi Experts,
I want to select rows from database like row number 10 to row number 20.How could it be done?

HI,
   First get the data into the INTERNAL TABLE from the FLAT FILE and read the internal table using the index.
    ex: 1) Read table ITAB index 10.
          2) Read table ITAB index 20.
or use as said by Srinivas Gurram, to get the range of records using where condition to the loop.
<REMOVED BY MODERATOR>
Edited by: Ravi Kumar on Jun 9, 2008 4:01 PM
Edited by: Alvaro Tejada Galindo on Jun 9, 2008 3:16 PM

How to get selected row from a non-bind ADF table

Hi,
I have an ADF table that is based on a collectionModel built programmatically. The collectionModel is this:
model = new SortableModel(new ArrayList<ArrayList>());
Hence, it is not a binding table. My question is how to get the selectedRows from a non-bind table.
I am used to building binding ADF table and I know we can get it from voiterator.getCurrentRow, since the selectionListener is set to the binding....collectionModel.makeCurrent
<af:table value="#{bindings.ItasLookupTypesVO1.collectionModel}"
selectedRowKeys="#{bindings.ItasLookupTypesVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.ItasLookupTypesVO1.collectionModel.makeCurrent}"
</af:table>
I am thinking maybe I need to write my own selectionListener, but need more advice/ideas of what's the codes in the customer selection Listener to get it from my SortableModel.
Please help.
Thanks
-Mina

I'm not sure if this works in your case, but check out the selection listener I write in this blog http://wp.me/pcBZk-eu
You should use the selection event and check the added set. This should give you access to the selected row.
Timo

How to get selected row from table(FacesCtrlHierBinding ).

I'am trying to get selected row data from table:
FacesCtrlHierBinding rowBinding = (FacesCtrlHierBinding) tab.getSelectedRow();
Row rw = rowBinding.getRow();
But import for oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding cannot be found from my JDev 11.
What is correct package for FacesCtrlHierBinding?

Hi, another problem.
I fill table with data manualy from source:
<af:table var="row" value="#{getCompanyData.com}"
rowSelection="single" columnSelection="single"
editingMode="clickToEdit"
binding="#{getCompanyData.tab}"
selectionListener="#{getCompanyData.GetSelectedCompany}">
<af:column sortable="false" headerText="col1">
<af:outputText value="#{row.id}"/>
</af:column>
<af:column sortable="false" headerText="col2">
<af:outputText value="#{row.name}"/>
</af:column>
<af:column sortable="false" headerText="col3">
<af:outputText value="#{row.phone}"/>
</af:column>
</af:table>
and when I'am trying to use method to get selected row:
RichTable table = this.getTab(); //get table bound to UI Table
RowKeySet rowKeys = table.getSelectedRowKeys();
Iterator selection = table.getSelectedRowKeys().iterator();
while (selection.hasNext())
Object key = selection.next();
table.setRowKey(key);
Object selCompany = table.getRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding) selCompany;
row = rowData.getRow();
I got an error:
SEVERE: Server Exception during PPR, #1
javax.el.ELException: java.lang.ClassCastException: data.COMPANY cannot be cast to oracle.jbo.uicli.binding.JUCtrlHierNodeBinding
When I created tables by dragging data from date control, all worked fine.
What could be a problem?

How do i copy and paste selected rows from numbers to another numbers worksheet

I have asked this question before, but it sounds as if numbers did not have the update at that time. I have pasted a spreadsheet from excel into numbers. I would now like to take selected rows, for example, row 5, row 9, row 22, row 27, etc, copy these entire rows, and pastte into another blank numbers work sheet. In excel, one can hold down the ctrl key, and click on each row they want to copy, and all will be copied in one operation, Than you can paste into a new excel work sheet. I have tried this on my ipad 2 many times, holding down the command key, and tapping on each row I want to copy. I just cannot get this to work. Please let me know how to do this, if numbers even has this possible. Thanks.

I have tried this on my ipad 2 many times, holding down the command key, and tapping on each row I want to copy.
Command Key.... on ipad? Ddint know there was one.
As for copying non-continuous ranges, cannot be done on ipad at this time. On a desktop maybe, but i cannot test it right now.
Each row can be done individually, or you could sort the rows to grab the range you want. To do this (espeically if there is nothing that is unique about them), just make a new column and place a 1 in the cell for each row you want to copy, sort. That will place all your rows together and enable you to copy.paste them back out.
If you want to preserve the original sort order, make another column (I usually use A for this) and put in =ROW() as the equation. Fill it down for the whole table and copy/paste values over it. now after you do any kind of sorting, you can always return the list to the original sort order.
Jason

How do I select rows from the same table that have multiple occurances

Hi Everybody,
I am trying to select records from a detail table by grouping it. The table has more than 1 million records and the query is not performing well. The basic question is how to select a distinct record from a table which matches all values in one column and any in the other.
desc SCV
ID NUMBER PK (ID + SCRID)
SCRID NUMBER FK(SC)
ID SCRID
1 1
2 1
3 1
4 2
5 2
6 3
7 4
8 4
desc PROJECTS
ID NUMBER PK
NAME VARCHAR2(100)
ID NAME
1 PROJECT1
2 PROJECT2
3 PROJECT3
4 PROJECT4
desc PJS
ID NUMBER
PROID NUMBER FK (PROJECTS)
SCRID NUMBER FK (SCV(SCRID + SCVID)
SCVID NUMBER
ID PROID SCRID SCVID
1 1 1 1
2 1 1 2
3 1 2 5
4 1 3 6
5 1 4 7
6 2 1 3
7 2 2 4
8 2 2 5
9 2 4 7
There are over 1 million records in PJS.
desc TBP
SCRID NUMBER
SCVID NUMBER
SCRID SCVID
1 1
1 2
1 3
2 4
2 5
3 6
4 7
4 8
The requirement is to select projects that have matching SCRID, SCVID from TBP such that
all distinct SCRID should match and within that and any SCVID match will do. (A "AND" between each SCRID and an "OR" for each SCVID in that SCRID like 'SCRID = 1 AND (SCVID = 1 OR SCVID = 2 OR SCVID = 3) AND SCRID = 2 AND (SCVID =....)
So, for the sample data it should return us PROID = 1
I have few queries written for this:
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 1
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 2
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 3
INTERSECT
SELECT PROID FROM PJS,TBP WHERE TBP.SCVID = PJS.SCVID AND TBP.SCRID = 4
This query performs well but the cost is very high, hardcoding, sorting.
The 2nd option is to:
SELECT pjs.PROID proid
FROM TBP tbp,
PJS pjs
WHERE pjs.SCVID = tbp.SCVID
AND pjs.SCRID = tbp.SCRID
GROUP BY pjs.PROID
HAVING COUNT(DISTINCT pjs.SCRID) = (SELECT COUNT(DISTINCT SCRID ) FROM TBP)
This has a low cost but runs slowly.
One more way I tried was with the IN operator like
SELECT DISTINCT PROID FROM PJS A,TBP T WHERE T.SCRID = 1 AND T.SCVID = A.SCVID
AND PROID IN (SELECT PROID FROM PJS A,TBP T WHERE T.SCRID = 2 AND T.SCVID = A.SCVID
AND PROID IN (...SO ON with each DISTINCT SCRID.
Again this involves too much of sorting.
Any help will be appriciated.
Thanks in advance.

Hi Andrew,
Use DELETE t_itab statement inside the loop.
I have modified your code. It is perfectly working.See bellow -
LOOP AT it_zmember01 INTO wa_zmember01.
WRITE: / wa_zmember01-mnumber UNDER 'NUMBER',
wa_zmember01-mname UNDER 'NAME',
wa_zmember01-mdob UNDER 'DOB'.
WRITE / '-----------------------------------------------------------------'.
DELETE it_zmember01. " Modified
ENDLOOP.
DELETE it_zmember01. statement inside the loop will delete the current row of the table.
Regards
Pinaki

How to delete a selected row from datagrid and how to create a datagrid popup

hi friends,
              I am new to flex.i am doing a flex4 application,i need help for this.
            i am having a data grid with columns.i have two questions.
           Ques 1: when i selected a partiuclar row from a datagrid and click delete button means that record will delete from the datagrid and DTO from the cloud tables also.
            Ques 2: when i save the data grid values using save button means that data will store in respective cloud DTO which is related to the datagrid,
                 My requirement is i am using a search button when i click the search button it will show a datagrid that datagrid will contain the previous datagrid datas which is saved in the cloud.
REQUIREMENT example: first screen:           i am using with data grid 3 columns (Student Roll number ,Student Name,Student pecentage)---->save--->data will store in cloud DTO.
Second screen:                search button ----> it need show datagrid popup.it will have data which we saved in the first screen with same columns(Student Roll number ,Student Name,Student pecentage).
This is my requirement.
Any suggession welcome.
Thanks in advance.
B.Venkatesan

Lets break the problem statement in multiple steps
1. We need a way to know the selection on all rows.
2. We need the association of the checkBox with the data
The solution is to use a arrayCollection/array that holds all the instances created for checkbox.This collection should be a property of component containing the datagrid. We need to use a custom component implementation or inline ItemRenderer. The way you have used is called dropinItemRenderer. Preferaly use custom component implementation and add the instance to the arrayCollection at CreationComplete. Make sure you use addItemAt so that you add the instance in the same row as the data. To get rowIndex the custom Checkbox should implement IDropInListItemRenderer. You could iterate this collection to check all the instances that are checked.
Note: This is the approach considering your dataprovider doesnt have a selection field.
Nishant

How to delete a Selected row from datagrid and how to create a datagrid popup with saved values

hi friends,
              I am new to flex.i am doing a flex4 application,i need help for this.
            i am having a data grid with columns.i have two questions.
           Ques 1: when i selected a partiuclar row from a datagrid and click delete button means that record will delete from the datagrid and DTO from the cloud tables also.
            Ques 2: when i save the data grid values using save button means that data will store in respective cloud DTO which is related to the datagrid,
                My requirement is i am using a search button when i click the search button it will show a datagrid that datagrid will contain the previous datagrid datas which is saved in the cloud.
REQUIREMENT example: first screen: i am using with data grid 3 columns (Student Roll number ,Student Name,Student pecentage)---->save--->data will store in cloud DTO.
Second screen: search button ----> it need show datagrid popup.it will have data which we saved in the first screen with same columns(Student Roll number ,Student Name,Student pecentage).
This is my requirement.
Any suggession welcome.
Thanks in advance.
B.Venkatesan

Lets break the problem statement in multiple steps
1. We need a way to know the selection on all rows.
2. We need the association of the checkBox with the data
The solution is to use a arrayCollection/array that holds all the instances created for checkbox.This collection should be a property of component containing the datagrid. We need to use a custom component implementation or inline ItemRenderer. The way you have used is called dropinItemRenderer. Preferaly use custom component implementation and add the instance to the arrayCollection at CreationComplete. Make sure you use addItemAt so that you add the instance in the same row as the data. To get rowIndex the custom Checkbox should implement IDropInListItemRenderer. You could iterate this collection to check all the instances that are checked.
Note: This is the approach considering your dataprovider doesnt have a selection field.
Nishant

How to read 'clicked header' AND selected row from multicolumn listbox?

I have a multicolumn listbox filled with 6 columns and about 500 rows.
I want the user to be able to click on a column header, and sort the listbox alphabetically on that column. I've written the code for that, and that works. (using the 'itemnames' en 'get clicked col hdr' properties.)
However, I also want to include the option, that when a user highlights a row, and then clicks on the header, that after the listbox gets sorted it scrolls down to the selected row.
(So that the user doesn't have to search for it)
And that's where things go wrong, because the value of the listbox changes to zero when you click on a column header. No I idea why it does that, but it's rather
annoying. Can I change that behaviour somehow?
Or any ideas how to get around it?

My thanks to you and Jared.
Seems I got a working solution now.
Did take a while to figure out why your solution worked. Basicly, you're reading the row from a few iterations before.
As soon as I understood that, I simplified it a little. Look at the attached file... I think it does the same. :-)
Jared asked for the sorting routine. As I don't seem to be able to attach files when replying to comments, I took the liberty to include it here also.
Basicly, I just use the 'sort 1D array' that comes with Labview 6. To be able to sort a 2D array, I convert every row to a cluster. That's something the 'sort 1D array' VI can handle nicely.
To sort on the correct column, I just cut all columns in front, and paste them behind again. A
fter sorting, I reverse the process.
Anthony.
Attachments:
copy2_of_multicolumn.vi ‏26 KB
sort_2d_string_array.vi ‏34 KB

Selecting rows from a JTable using keys

Hi all, be very grateful for some help on this.
I want to provide functionality in an application where the user will be able to select multiple rows from a JTable by using the page up/ page down button.
Anybody know how this can be done?
Thanks

Just add a KeyListener to the table which does what you want on pressing the relevant key.
it seems a bit odd though. If I pressed page up/down in a table I'd expect it to scroll and would be somewhat confused if it started selecting stuff. Generally it's best not to muck around with the default behaviour of UI components.

How to save the selected rows from Advance table into database

Hi
I have requirement like..
In custom page , Manager Search the Candidates and selects the candidate ROWS from advance table.
The reqt is how to save the selected multiple rows into the database.

hi Reetesh,
In Custom page
Supoose the Recruiter Search is for Position Finance Mangager , it retrieves 100 rows , out of which Recruiter select 10 rows .
So in Such scenario how to save this 10 rows against Recruiter
, i mean , Is i need to create custom table, to save Recruiter , these selected 10 rows.
I hope u understand my question

Selecting Row from Rowset

Similar Messages

Maybe you are looking for