Selecting rows in table control

Hi experts,
I have question regarding selecting rows in table control. How can I select a row when a button is pressed. I cannot use the selection column in this case. Is there any option to achieve my requirement without using the selection column. Thanks.
regards,
sriram.

By,
Using the Get cursor syntax you can achive the Selected row in Table control.
  DATA : selrow TYPE i,
         selindex TYPE i  .
* getting the cursor line in Table Control for selected row
  GET CURSOR FIELD selfield LINE selrow.
  selindex = <tablecontrol>-top_line + selrow - 1.
Prabhu

Similar Messages

  • How to get all the index of "selected rows" in table control?

    Hi Gurus,
    I have a table control, wherein I need to get selected row so that I can get its respective TABIX.
    I know that the event for capturing selected row is in PAI.
    I also ensure that the w/ selColumn name in my screenpainter is exactly the same as my declaration in ABAP.
    TOP INCLUDE
    YPES: BEGIN OF Y_ZQID_CHECK,
            IDNUM           TYPE ZQID_CHECK-IDNUM,
            WERKS           TYPE ZQID_CHECK-WERKS,
            MATNR           TYPE ZQID_CHECK-MATNR,
            LICHA           TYPE ZQID_CHECK-LICHA,
            LIFNR           TYPE ZQID_CHECK-LIFNR,
            ECOA_S          TYPE ZQID_CHECK-ECOA_S,
            ID_STAT         TYPE ZQID_CHECK-ID_STAT,
            ID_DATE         TYPE ZQID_CHECK-ID_DATE,
            FLAG_MAILCOA(1) TYPE C,
            MARK(1)         TYPE C, "Name of w/ SelColumn in ScreenPainter: T_ZQIDCHECK_DISCH-MARK
           END   OF Y_ZQID_CHECK.
    DATA: T_ZQIDCHECK_DISCH TYPE STANDARD TABLE OF Y_ZQID_CHECK WITH HEADER LINE.
    PAI
    PROCESS AFTER INPUT.
    * MODULE USER_COMMAND_9004.
    LOOP AT T_ZQIDCHECK_DISCH.
      MODULE READ_TC_DISCH .
    ENDLOOP.
    module READ_TC_DISCH input.
      DATA: W_LINE_SEL TYPE SY-STEPL,
                  W_TABIX    LIKE SY-TABIX.
      GET CURSOR LINE W_LINE_SEL.
      W_TABIX = TC_ID_ONLY-TOP_LINE + w_LINE_SEL - 1.
      MODIFY T_ZQIDCHECK_DISCH INDEX TC_ID_ONLY-current_line.
    If I am selecting single row, I can properly get the selected index via debug.
    BUG:
    When I'm selecting multiple rows in table control, only the last row is always being read inside the loop of my table control.
    Please see the screenshot.
    [url]http://img268.imageshack.us/img268/5739/tcselectedrows.jpg[url]
    Notice in the debug screenshot, even if it's just in the 1st loop of table control, it automatically gets the 4th table control index, instead of the 2nd one.
    Helpful inputs will be appreciated.
    Thanks.
    Jaime
    Edited by: Jaime Cabanban on Dec 9, 2009 3:16 PM

    Hi,
    Are you sure that you have selected multiple line for tablecontrol in the property window of the tablecontrol.
    Flowlogic.
    LOOP WITH CONTROL TC_01.
         Module Get_Marked.
    ENDLOOP.
    Module Pool
    Module Get_Marked.
    read the data from the internal table where mark  = 'X'.
    this should give you only selected records.
    Endmodule.
    Kindly check the tablecontrol property.
    Regards,
    Ranjith Nambiar

  • How to delete selected row in table control

    Hi all,
    here is my coding for deleting selected row.
    But it is not working correctly.
    I am not able to delete seleced row.
    If i press delete button it automatically delete from beginning instead of selected rows.
    Can anyone can help me plz...
    CONTROLS rowdeleting TYPE TABLEVIEW USING SCREEN 100.
    TABLES zdetails.
    data : begin of itab occurs 0,
    NAME TYPE ZDETAILS-NAME,
    ADDRES TYPE ZDETAILS-ADDRES,
    CONTACTNO TYPE ZDETAILS-CONTACTNO,
    INIT TYPE C,
    end of itab .
    DATA OK_CODE LIKE SY-UCOMM.
    CALL SCREEN 100.
    MODULE STATUS_0100 OUTPUT.
    SET PF-STATUS 'BACK'.
    IF ITAB-INIT IS INITIAL.
    SELECT NAME ADDRES CONTACTNO FROM ZDETAILS
    INTO CORRESPONDING FIELDS OF TABLE ITAB.
    DESCRIBE TABLE ITAB LINES rowdeleting-LINES.
    ITAB-INIT = 'X'.
    ENDIF.
    ENDMODULE. " STATUS_0100 OUTPUT
    MODULE CHANGE_SDYN_CONN OUTPUT.
    READ TABLE itab INTO ZDETAILS INDEX rowdeleting-current_line.
    ENDMODULE. " CHANGE_SDYN_CONN OUTPUT
    MODULE READ_TABLE_CONTROL INPUT.
    IF ITAB-INIT = 'X' AND OK_CODE = 'DELETE'.
    DELETE ITAB index rowdeleting-current_line ."FROM ZDETAILS.
    DESCRIBE TABLE ITAB LINES rowdeleting-LINES.
    ENDIF.
    ENDMODULE. " READ_TABLE_CONTROL INPUT
    MODULE USER_COMMAND_0100 INPUT.
    CASE OK_CODE.
    WHEN 'BACK'.
    LEAVE PROGRAM.
    WHEN 'DELETE'.
    IF ITAB-INIT = 'X' AND OK_code = 'DELETE'.
    DELETE ITAB index rowdeleting-current_line .
    ENDIF.
    ENDCASE.
    ENDMODULE.
    regards ,
    ranjith.

    Hi,
    Check the following code:
    CONTROLS TABLE_CONTROL TYPE TABLEVIEW USING SCREEN 100.
    TABLES SDYN_SDW4.
    DATA SDYN_ITAB LIKE STANDARD TABLE OF SDYN_SDW4.
    DATA INIT.
    DATA OK_CODE LIKE SY-UCOMM.
    DATA SAVE_OK LIKE SY-UCOMM.
    DATA MARK.
    DATA  COL TYPE CXTAB_COLUMN.
    CALL SCREEN 100.
    *&      Module  STATUS_0100  OUTPUT
          text
    MODULE STATUS_0100 OUTPUT.
      SET PF-STATUS 'GRUND'.
      SET TITLEBAR '100'.
      IF INIT IS INITIAL.
    Datenbeschaffung
       SELECT CARRID CONNID CITYFROM AIRPFROM CITYTO AIRPTO DEPTIME ARRTIME
                DISTANCE DISTID
                FROM SPFLI
                INTO CORRESPONDING FIELDS OF TABLE SDYN_ITAB.
        DESCRIBE TABLE SDYN_ITAB LINES TABLE_CONTROL-LINES.
        INIT = 'X'.
      ENDIF.
    ENDMODULE.                             " STATUS_0100  OUTPUT
    *&      Module  FILL_TABLE_CONTROL  OUTPUT
          text
    MODULE CHANGE_SDYN_CONN OUTPUT.
    you can change the content of current table control line via
    sdyn_conn
    READ TABLE sdyn_itab INTO sdyn_conn INDEX table_control-current_line.
    ENDMODULE.                             " FILL_TABLE_CONTROL  OUTPUT
    *&      Module  READ_TABLE_CONTROL  INPUT
          text
    MODULE READ_TABLE_CONTROL INPUT.
    Check input values
      IF MARK = 'X' AND SAVE_OK = 'DELETE'.
        DELETE TABLE SDYN_ITAB FROM sdyn_sdw4.
        DESCRIBE TABLE SDYN_ITAB LINES TABLE_CONTROL-LINES.
      ENDIF.
    ENDMODULE.                             " READ_TABLE_CONTROL  INPUT
    *&      Module  USER_COMMAND_0100  INPUT
          text
    MODULE USER_COMMAND_0100 INPUT.
      SAVE_OK = OK_CODE.
      CLEAR OK_CODE.
      CASE SAVE_OK.
        WHEN 'SORT'.
          DATA: FLDNAME(100),HELP(100).
          READ TABLE TABLE_CONTROL-COLS INTO COL WITH KEY SELECTED = 'X'.
          SPLIT COL-SCREEN-NAME AT '-' INTO HELP FLDNAME.
          SORT SDYN_ITAB BY (FLDNAME).
      ENDCASE.
    ENDMODULE.                             " USER_COMMAND_0100  INPUT
    *&      Module  EXIT  INPUT
          text
    MODULE EXIT INPUT.
    LEAVE PROGRAM.
    ENDMODULE.                 " EXIT  INPUT
    Regards,
    Bhaskar

  • How to select perticular row in table control for BDC

    Hi all
    I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is  material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
    Please Suggest me. it urgent.
    Thanks& Regards,
    RP

    Hi all
    I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is  material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
    Please Suggest me. it urgent.
    Thanks& Regards,
    RP

  • BDC : to select different rows in table control

    Hi,
    I have to fill many rows in table control and want to select different row one by one  in increasing order which rows are filled in BDC.
    Can anybody suggest me with coding...
    thanks
    naresh

    Hi ,
    I am attaching sample code for BDC transaction code is : FV11 , This code is also contains poage down concepts . By using this page down concept you can add number of item fields
    Program Name        : ZFV11_NEW
    Program Description : To Upload Condition Records-FV11
    Author              : Jagadish
    Start Date          : 11/06/2007
    REPORT zfv11
           NO STANDARD PAGE HEADING LINE-SIZE 255.
       DO NOT CHANGE - the generated data section - DO NOT CHANGE    ***
      If it is nessesary to change the data section use the rules:
      1.) Each definition of a field exists of two lines
      2.) The first line shows exactly the comment
          '* data element: ' followed with the data element
          which describes the field.
          If you don't have a data element use the
          comment without a data element name
      3.) The second line shows the fieldname of the
          structure, the fieldname must consist of
          a fieldname and optional the character '_' and
          three numbers and the field length in brackets
      4.) Each field must be type C.
    Generated data section with specific formatting - DO NOT CHANGE  ***
    TABLES : t100.
    DATA: BEGIN OF record OCCURS 0,
    data element: KSCHA
            kschl(004),               "Condition Type
    data element: SELKZ_LIST
          selkz(001),
    data element: WERKS_D
            werks(004),               "Plant
    data element: ELIFN
            lifnr(010),               "Vendor
    data element: MATNR
            matnr(018),               "Material No.
    data element: KBETR_KOND
            kbetr(016),               "Amount
    data element: KODATAB
            datab(010),               "Condition Validity Date from
    data element: KODATBI
            datbi(010),               "Condition Validity To
    data element: MWSKZ
            mwsk1(002),
          END OF record.
    DATA : BEGIN OF it_new OCCURS 0,                    " Internal Table for Header Data
           kschl(004),
           werks(004),
           lifnr(010),
           END OF it_new.
    DATA : BEGIN OF it_item OCCURS 0,                  " Internal table for Item Data
          werks(004),
          lifnr(010),
          matnr(018),
          kbetr(016),
          datab(010),
          datbi(010),
          mwsk1(002),
          END OF it_item.
    DATA : cnt(2) TYPE n,
           fld(25) TYPE c.
    TYPE-POOLS: truxs.
    DATA: it_raw TYPE truxs_t_text_data.
    DATA : n TYPE n.
    DATA:
         BEGIN OF t_data OCCURS 0,
               data TYPE string,
         END   OF t_data.
    DATA:BEGIN OF it_mess OCCURS 0,
      msgtyp(5),
       lms(200),
       msgv1(50),
        END OF it_mess.
    DATA : p_mode    TYPE c.
    DATA:it_msgtab TYPE STANDARD TABLE OF  bdcmsgcoll WITH HEADER LINE,
       it_msgtab1 TYPE STANDARD TABLE OF bdcmsgcoll WITH HEADER LINE.
    DATA :  l_mstring(150).
    DATA : BEGIN OF bdcdata OCCURS 0.
            INCLUDE STRUCTURE bdcdata.
    DATA: END OF bdcdata.
    PARAMETERS : p_file1 LIKE rlgrap-filename.
    INITIALIZATION.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
      PERFORM file_selection.
      PERFORM data_upload.
      PERFORM table_control.
      LOOP AT it_new.
        REFRESH bdcdata.
        PERFORM bdc_dynpro      USING 'SAPMV13A' '0100'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'RV13A-KSCHL'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'RV13A-KSCHL'
                                      it_new-kschl.
        PERFORM bdc_dynpro      USING 'SAPLV14A' '0100'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'RV130-SELKZ(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=WEIT'.
        PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KONP-KBETR(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '/00'.
        PERFORM bdc_field       USING 'KOMG-WERKS'
                                      it_new-werks.
        PERFORM bdc_field       USING 'KOMG-LIFNR'
                                      it_new-lifnr.
    DATA: "X(5) TYPE N,
             N(5) TYPE N.
       N = 0.
       LOOP AT it_item.
         N = N + 1.
       ENDLOOP.
       "X = 1.
       CNT = 1.
       DO N TIMES.
         IF CNT > 19.
           perform bdc_field       using 'BDC_OKCODE' 'KOMG-MATNR(01)'.
           perform bdc_field       using 'BDC_OKCODE' '=P+'.
           PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
           CNT = 1.
         ENDIF.
        cnt = 1.
        LOOP AT it_item WHERE werks EQ it_new-werks AND lifnr EQ it_new-lifnr . "FROM x TO x.
          CONCATENATE 'KOMG-MATNR(' cnt ')' INTO fld.
          PERFORM bdc_field USING fld it_item-matnr.
          CONCATENATE 'KONP-KBETR(' cnt')' INTO fld.
          PERFORM bdc_field USING fld it_item-kbetr.
          CONCATENATE 'RV13A-DATAB(' cnt ')' INTO fld.
          PERFORM bdc_field USING fld it_item-datab.
          CONCATENATE 'RV13A-DATBI(' cnt ')' INTO fld.
          PERFORM bdc_field USING fld it_item-datbi.
          CONCATENATE 'KONP-MWSK1(' cnt ')' INTO fld.
          PERFORM bdc_field USING fld it_item-mwsk1.
          cnt = cnt + 1.
          if cnt = 20.
            perform bdc_field       using 'BDC_OKCODE' 'KOMG-MATNR(19)'.
            perform bdc_field       using 'BDC_OKCODE' '=P+'.
            PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
            CNT = 1.
           endif.
    CLEAR it_item.
        ENDLOOP.
       ENDDO.
        PERFORM bdc_dynpro      USING 'SAPMV13A' '1363'.
        PERFORM bdc_field       USING 'BDC_CURSOR'
                                      'KONP-MWSK1(01)'.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                                      '=SICH'.
        CALL TRANSACTION 'FV11' USING bdcdata MODE 'A'
                                            UPDATE 'S'
                                           MESSAGES  INTO it_msgtab.
        CLEAR bdcdata[].
        PERFORM error.
      ENDLOOP.
           Start new screen   -Subroutine     for screen s                                      *
    FORM bdc_dynpro USING program dynpro.
      CLEAR bdcdata.
      bdcdata-program  = program.
      bdcdata-dynpro   = dynpro.
      bdcdata-dynbegin = 'X'.
      APPEND bdcdata.
    ENDFORM.                    "BDC_DYNPRO
           Insert field        -Subroutine   for field s                                         *
    FORM bdc_field USING fnam fval.
      CLEAR bdcdata.
      bdcdata-fnam = fnam.
      bdcdata-fval = fval.
      APPEND bdcdata.
    ENDFORM.                    "BDC_FIELD
    *&      Form  file_selection
    FORM file_selection .
      CALL FUNCTION 'F4_FILENAME'
        EXPORTING
          program_name  = syst-cprog
          dynpro_number = syst-dynnr
          field_name    = 'P_FILE1'
        IMPORTING
          file_name     = p_file1.
    ENDFORM.                    " file_selection
    *&      Form  data_upload
    FORM data_upload .
      CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
       EXPORTING
        I_FIELD_SEPERATOR        =
           i_line_header            =  'X'
           i_tab_raw_data           =  it_raw
           i_filename               =  p_file1
         TABLES
           i_tab_converted_data     = record
        EXCEPTIONS
           conversion_failed        = 1
           OTHERS                   = 2.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " data_upload
    *&      Form  error
    FORM error .
      LOOP AT it_msgtab.
        IF it_msgtab-msgtyp = 'E'.
          SELECT SINGLE * FROM t100 WHERE sprsl = it_msgtab-msgspra
                                    AND   arbgb = it_msgtab-msgid
                                    AND   msgnr = it_msgtab-msgnr.
          IF sy-subrc = 0.
            l_mstring = t100-text.
            IF l_mstring CS '&1'.
              REPLACE '&1' WITH it_msgtab-msgv1 INTO l_mstring.
              REPLACE '&2' WITH it_msgtab-msgv2 INTO l_mstring.
              REPLACE '&3' WITH it_msgtab-msgv3 INTO l_mstring.
              REPLACE '&4' WITH it_msgtab-msgv4 INTO l_mstring.
            ELSE.
              REPLACE '&' WITH it_msgtab-msgv1 INTO l_mstring.
              REPLACE '&' WITH it_msgtab-msgv2 INTO l_mstring.
              REPLACE '&' WITH it_msgtab-msgv3 INTO l_mstring.
              REPLACE '&' WITH it_msgtab-msgv4 INTO l_mstring.
            ENDIF.
            CONDENSE l_mstring.
            it_mess-msgtyp = it_msgtab-msgtyp.
            it_mess-lms = l_mstring.
            it_mess-msgv1 = it_msgtab-msgv1.
            APPEND it_mess.
           WRITE: / it_msgtab-msgtyp, l_mstring(150).
          ELSE.
           WRITE: / it_msgtab.
            it_mess-msgtyp = it_msgtab-msgtyp.
            it_mess-lms = l_mstring.
            it_mess-msgv1 = it_msgtab-msgv1.
            APPEND it_mess.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " error
    *&      Form  table_Control
    FORM table_control .
    SORT record BY lifnr matnr.
      LOOP AT record.
        ON CHANGE OF record-lifnr.
          MOVE-CORRESPONDING record TO it_new.
          APPEND it_new.
        ENDON.
        MOVE-CORRESPONDING record TO it_item.
        APPEND it_item.
      ENDLOOP.
    ENDFORM.                    " table_Control
    Reward if useful
    Thanks
    Jagadeesh.G

  • How to select all the rows of table control in BDC

    Hi All,
    While I am doing BDC for Transaction Code MC88, After the first screen I will get another screen with tabble control, Here I need to select all the rows of table control, I am assignng the 'X' to the first field of Table Control which is the indicator for selection.
    Here I am getting message called Indicator field is not in program and screen.
    While doing Recording I am not able to record the indicator, Please any one let me know how to record the Entire table control selection.
    Thanks in advance..

    Sorry about that lakshmi. Here is my code.
        PERFORM dynpro USING : 'X'   'SAPMMCP6'          '0105',
                               ' '   'RMCP2-MATNR'       t_matnr,
                               ' '   'RMCP2-WERKS'       t_werks,
                               ' '   'BDC_OKCODE'        '=AKTV'.
        PERFORM dynpro USING : 'X'   'SAPLMCPA'          '0707',
                               ' '   'BDC_OKCODE'        '=MRKE'.
        PERFORM dynpro USING : 'X'   'SAPLMCPA'          '0707',
                               ' '   'BDC_OKCODE'        '=GRAO

  • How to delete the row in table control with respect to one field in module pool programming?

    Hi,
    Can I know the way to delete the row in table control with respect to one field in module pool programming
    Regards
    Darshan MS

    HI,
    I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
    I have written this code,
    module USER_COMMAND_9000 input.
    DATA OK_CODE TYPE SY-UCOMM.
    OK_CODE = SY-UCOMM.
    CASE OK_CODE.
         WHEN 'DELETE'.
            LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
                APPEND LS_SOURCE TO LT_RESTORE.
                DELETE TABLE LT_SOURCE FROM LS_SOURCE.
                SOURCE-LINES = SOURCE-LINES - 1.
            ENDLOOP.
    But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
    So I thought of doing with respect to the field.

  • Unable to delete a row in table control

    Hi,
    I'm unable to delete a row in table control.
    I have defined a selection column for my table control but it is not getting value 'X' when i'm selecting a row for deletion.
    Also, when I press enter, some of the columns in table control are getting initialized. I'm passing these values to the internal table along with other columns.
    Please help.
    Regards,
    Manasee
    Message was edited by: Manasee Chandorkar

    hi,
    kindly chk this.
    PROCESS BEFORE OUTPUT.
    MODULE status_9010.
    LOOP WITH CONTROL tab_control.
    MODULE move_data_to_table.
    ENDLOOP.
    PROCESS AFTER INPUT.
    LOOP WITH CONTROL tab_control.
    MODULE move_data_from_table.
    ENDLOOP.
    *& Module move_data_to_table OUTPUT
    This is to move the data from the internal table to the table control
    MODULE move_data_to_table OUTPUT.
    This is to move the data from the internal table to the table control
    zmpets_mode-modecode,zmpets_range-rangeid,zmpets_servfacto-factor are column name of table control
    READ TABLE int_factor INDEX tab_control-current_line.
    IF sy-subrc = 0.
    zmpets_mode-modecode = int_factor-modecode.
    zmpets_range-rangeid = int_factor-rangeid.
    zmpets_servfacto-factor = int_factor-factor.
    ENDIF.
    ENDMODULE. " move_data_to_table OUTPUT
    *& Module move_data_from_table INPUT
    Date is moved from the table control to the Internal Table
    MODULE move_data_from_table INPUT.
    To move the data from the table control to internal table 'INT_FACTOR'.
    int_factor-modecode = zmpets_mode-modecode.
    int_factor-rangeid = zmpets_range-rangeid.
    int_factor-factor = zmpets_servfacto-factor.
    int_factor-chk = line.
    *here if the data is there, it will modify
    MODIFY int_factor INDEX tab_control-current_line.
    IF sy-subrc NE 0. "data not exixting in table control . ie new data, then append it
    APPEND int_factor.
    CLEAR int_factor.
    ENDIF.
    ENDMODULE. " move_data_from_table INPUT
    *delete a line from table control
    MODULE user_command_9010 INPUT.
      CASE sy-ucomm.
    When an entry is deleted, and the entry is removed from the table
    control.
        WHEN 'DELETE'.
          PERFORM f_del_frm_tab_cntrl.
      ENDCASE.
    ENDMODULE.
    FORM f_del_frm_tab_cntrl .
      LOOP AT int_factor WHERE chk = 'X'.
        DELETE int_factor WHERE chk = 'X' .
        CONTINUE.
      ENDLOOP.
      CLEAR int_factor.
    ENDFORM.
    for any clarifiaction pls mail me.
    pls reward points, if this helped u.
    regards,
    anversha.
    [email protected]
    Message was edited by: Anversha s

  • How to get selected row from table(FacesCtrlHierBinding ).

    I'am trying to get selected row data from table:
    FacesCtrlHierBinding rowBinding = (FacesCtrlHierBinding) tab.getSelectedRow();
    Row rw = rowBinding.getRow();
    But import for oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding cannot be found from my JDev 11.
    What is correct package for FacesCtrlHierBinding?

    Hi, another problem.
    I fill table with data manualy from source:
    <af:table var="row" value="#{getCompanyData.com}"
    rowSelection="single" columnSelection="single"
    editingMode="clickToEdit"
    binding="#{getCompanyData.tab}"
    selectionListener="#{getCompanyData.GetSelectedCompany}">
    <af:column sortable="false" headerText="col1">
    <af:outputText value="#{row.id}"/>
    </af:column>
    <af:column sortable="false" headerText="col2">
    <af:outputText value="#{row.name}"/>
    </af:column>
    <af:column sortable="false" headerText="col3">
    <af:outputText value="#{row.phone}"/>
    </af:column>
    </af:table>
    and when I'am trying to use method to get selected row:
    RichTable table = this.getTab(); //get table bound to UI Table
    RowKeySet rowKeys = table.getSelectedRowKeys();
    Iterator selection = table.getSelectedRowKeys().iterator();
    while (selection.hasNext())
    Object key = selection.next();
    table.setRowKey(key);
    Object selCompany = table.getRowData();
    JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding) selCompany;
    row = rowData.getRow();
    I got an error:
    SEVERE: Server Exception during PPR, #1
    javax.el.ELException: java.lang.ClassCastException: data.COMPANY cannot be cast to oracle.jbo.uicli.binding.JUCtrlHierNodeBinding
    When I created tables by dragging data from date control, all worked fine.
    What could be a problem?

  • How to find out the selected column in Table Control

    Hi all,
          How to find out the selected column in Table Control?
    Thanks & Regards,
    YJR

    Hi,
    Let your table control name in Screen painter be TC1.
    READ TABLE TC1-COLS INTO WA_COLS (some wok area)
                 WITH KEY SELECTED = 'X'.
            IF SY-SUBRC = 0.
              CLEAR: W_DUMMY, W_COL_NAME.
              SPLIT WA_COLS-SCREEN-NAME AT '-' INTO W_DUMMY
                                                   W_COL_NAME.
            endif.
    W_COL_NAME gives you the column name.
    Hope it helps.
    cheers
    sharmistha

  • Record selected in the table control

    Hi All,
      How do i know the line no of the record selected in the table control.I have declared a table control CONTROLS : t_control1 type tableview using screen 200.But in t_control1-current_line the line no that is stored is always 1.
    Thanks,
    Rakesh.

    in table control property window you have to set that suppose you have set itab-mark as the sel field then it will always be X if you select the field ...
    regards
    shiba dutta

  • How do I deselect a row in table control on scrren?

    Hello All:
         How do I write the code to deselect a row in table control on a screen? This is in dialog programming.
    Thanks.
    Mithun

    I thought that the descriptions given in the Help are clear.
    The ADDRESS function constructs a cell address string from separate row, column, and table identifiers.
    ADDRESS(row, column, [type], [style], [table])
    row: The row number of the address.
    column: The column number of the address.
    I dropped the comments about type, style and table as I don't use them here.
    =IF(ISBLANK(INDIRECT(ADDRESS(ROW(),1))),"",INDIRECT(ADDRESS(ROW(),2))*INDIRECT(A DDRESS(ROW(),3)))
    INDIRECT(ADDRESS(ROW(),1))
    returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 1st one)
    INDIRECT(ADDRESS(ROW(),2))
    returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 2nd one)
    INDIRECT(ADDRESS(ROW(),3))
    returns the contents of the cell whose row is the same than the one containing the formula \[the row number is given by ROW()] and whose column is the 3rd one)
    In short, when the formula is applied in row 9 it behaves like:
    =IF(ISBLANK(A9),"",B9*C9)
    The long syntax is required to be able to enter it only once in the header cell as described in the Help and in the PDF User Guide in a chapter entitled "Applying a Formula Once to Cells in a Column or Row".
    As we want to use such a formula, it would be odd to destroy its ability using a different formula in a standard bottom row.
    More, in a footer row, we may use shorter formulas than in other rows.
    In a standard row 10 we would have to write =SUM(D2:D9)
    in a footer row we enter only =SUM(D) which add the contents of every standard cells of the column D.
    This feature is also described in the named resources.
    Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:21:13)

  • Adding one additional row to table control of VA01

    HI all,
    I am working on free goods N:N senario which is not supported by sap standard.
    so we have decided to club all the material on the basis of material group and PSTYV = 'tann' in the table control of va01 and at the end of tann we have to display the free goods .The user exit is USEREXIT_MOVE_FIELD_TO_KOMP.
    Please help in in adding the additional row in table control of va01 (TCTRL_U_ERF_AUFTRAG).
    Even i have gone through all the thread in sdn and tried all the solution but none of the solution is working .
    plz quote solutions....
    thanks..
    Kundal.

    The user exit is USEREXIT_MOVE_FIELD_TO_KOMP
    Are you adding condition records, or adding free materials to VBAP?  If free materials to VBAP, you're in the wrong exit, I think....look for routines that allow you to add to internal table XVBAP in includes named like MV45AFZ*, and remember to set you UPDKZ to 'I'-insert if you're adding new rows.
    Not sure what you mean by not supported by SAP standard;  SAP does support free goods, via config!
    Edited by: BreakPoint on Mar 14, 2011 4:11 PM

  • Enable/Disable Rows In table Control

    I m getting material number for particular material doc.  if i get N rows in output i want to disable all other rows of table control.
    Moderator message: please search for previous solutions to similar problems before asking.
    Edited by: Thomas Zloch on Nov 20, 2010 7:24 PM

    Hi,
    In PBO, Loop at your table control lines, create a module inside it and use
    LOOP AT SCREEN.
    SCREEN-INPUT = '0'.
    MODIFY SCREEN.
    ENDLOOP.
    Regards,
    Senthil

  • Unable to select rows in table

    Hi Expert,
    I am a beginer of Webdynpro application development. I have created 2 views. In main view material No selection is there and in a second view table display is there. Data is getting populated nicely in second view but i uanble to select rows in table.
    I have checked the node parameters in component controller for selection 0 - n and it was maped in second view. and in table perameter row selectable perameter is also enabled. I unable to fix this issue. Kindly guide me.
    Thanks and Regards,
    Jayakumar Mani

    Hi Jayakumar,
           If you want select a single or multiple row of a table then
    1. your table should not be read only. This property should not be checked.
    2. It should be enabled. This property should be checked.
    3. It should be row selectable. This property should be checked.
    However when ever you create a new table in in layout the above properties are set accordingly by default.
    In your case if you are still unable to select a row of your table you can set this properties dynamically through coding from any particular action.
    Create a attribute of type WDUI_TSMODE.
    Then bind this attribute with the selection mode property and the set values according to your requirement.
    Check this once and reply in case of any issue.
    Regards,
    Monishankar C

Maybe you are looking for

  • Delete language template in use Cisco ISE

    Hi I have a problem updating my ise, there is a faulty language template in use as I can see in the log files, its not a system template so I want to proceed to delete it, but I can't because its still in use by a sponsor or a user, the problem is th

  • [solved] stat64() usage in C

    Can someone tell me how to use the large file functions, especially stat64()? I always get warning: implicit declaration of function 'stat64' and for the struct stat64 named "filestat" error: storage size of 'filestat' isn't known I already crawled e

  • Table Header is required in each page

    Hi, Inside the main window I have two tables say 1st table, 2nd Table . In the 1st  table I have only one row of data with header. In the 2nd table different header with many line items. It may go to next page. Now my requirement is if due to 2nd tab

  • Migrate from Premiere Pro CS6 to Premiere Pro CC Installation

    I am a Creative Cloud subscriber.  When I initially downloaded Adobe Premiere Pro, I downloaded CS6.  I know nothing about the program as I am a Final Cut Pro X user but I installed it so that I can start learning the software but have only just gott

  • Error logs for Jdeveloper embedded oc4j

    Hi guys, I am currently using the oc4j embedded within jdeveloper (9.0.2) to develop and obviously to debug some code. When there is an exception in the init() method, there seems to be no record of it in the logs, the only log I found are in jdev/sy