Selecting Semantic Group Key Fields for Cube to Cube DTP
Is it possible to use the semantic group key fields selection when performing a DTP between two infoCubes? When I try to select the key field of 0CALWEEK, i am unable to as the selection screen is grayed out like I'm in display mode even though I'm in change mode for the DTP.
Thanks,
Matthew
Hi,
Have you initialized the planning area for the 11th key figure to be loaded. Make sure that the key figure which you want to load is initialized for the planning version for the respective planning area.
Also check the loading period inside the variant is within the planning area initialized period for that key figure. And make sure that you have made the key figure assignment for the info cube and planning area inside the variant.
thanks and regards
Murugesan
Similar Messages
-
Select query on key field for different time format
Hello Experts,
I am working in Sender ABAP proxy <===> SAP PI 7.31 JAVA <===> Oracle database.
Oracle Database stores all records of material sold where the date is maintained in 01/15/2010 01:48:20 which has date and time format.
In ECC , I will be sending a proxy request with system date as the only field and this would be key field to select all the material records sold for 01/15/2010 in Oracle Database i.e. Select statement.As we can observe that the system data of ECC does not have time stamp.
I am clueless how to get this done in Message Mapping or in some way? If I maintain just the date stamp of ECC as the key field, would I be
able to fetch all the records from Database?
Regards
RebeccaDear Hareesh and Harish,
Ooopps the names are confusing. but very close..
Yes I changed my receiver structure and added <compareOperation> under the key field Material Number. In the Message Mapping , I assigned a constant EQ to <compareOperation>.
Now tested the proxy will value of Material with no 100 , expecting a response from database for Material 100. But getting error as below.
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSING">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message 53cc7fab-e712-0b20-e100-8000ac10134c(OUTBOUND) expired. at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:746) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:505) at
I am not sure whether there was any response from database.
I am close to end of this thread..
Please guide.
Regards
Rebecca -
Show different key fields for different caracteristics in the column.
Hi, experts
I am creating a query where there are 4 colomns reprensenting 4 different dates. But I would like to display diffferent key fields for them. For example, under DAY 1, i would like to diplay KeyField 1, for DAY2, DAY3 and DAY4, KeyField 2 et 3 will be added under them.
To do that, i made these key fields "Constant selection" and made some definition in the cells-------
On the line of DAY1 in the colomn KeyField 2 and KeyField 3, I made them "Always Hide".
But I didn't get what i wanted as the two columns (KF2 et KF3) still appear in the report, even if there are no data in these two columns.
Is it possible to realise this requirement:
DAY1 DAY2 DAY3
KF1 KF2 KF3 KF2 KF3
Thanks in advance!!!!There is no need to define a cell for this, use a restricted key figure:
KF1 needs to be restricted by Day1
KF2 restrict it by Day2 and so on,
and use those restricted figure in the key figure section, but to make the column more descriptive use a text variable for the name of the columns.
this should be easier than cell definition.
thanks.
Wond -
Group Key field Match Code in Vendor Master
My client have a unique requirement to group the vendors. We are using the Group key field in the vendor master for this purpose, We want to create a match code which can link the vendor number to the group key field. Anyone have any idea on how this can be developed or configured.
When I looked at the help on this field Following is the help mentioned. but I am not sure how the match code for the group key would work or how to configure this. I appreciate any inputs on this issue.
Group key
If the customer or the vendor belongs to a group, you can enter a group
key here. The group key is freely assignable.
If you create a matchcode using this group key, group evaluations are
possible.I know it has to be done by ABAP group but I got confused with the help on this field.. ABAP group says it is going to be a core code change since there is no user exit available for that field.
-
How to update key fields for table
Hi,
how to update key fields for a table.The update statement is not working for the same.
Regards,Hi,
See the below example.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
Regards,
raj. -
EEWB: Insert New Table with more than one key field for BP object
Hi Gurus,
I want to enhance Business Partner object with a new table with two key fields, one the address number and another a sequence number, because I need to save several entries for each address belonging to a determined business partner. Something as what happens in communication data (i.e fax number)for an address.
I have run the wizard from EEWB but the only possibility that offers you is to create only one key field for the new custom table. There is something in EEWB to achieve this, two key fields for the new table?
Another question is the following: which Badi or BAPI must I enhance to populate my table with the corresponding address number to which the data belong to?
I mean my custom data are filled through a table control that I have allocated within the screen sequence BUA130 (Detail Address). Thus, when a new address is added to a BP and my particular table control is populated within this address I should fill the key fields from my table (address number and sequence number) when the BP were saved. So, I must know beforehand which address number the system will assign to this new address.
I repeat the question: which Badi or BAPI must I enhance to populate my table with the corresponding address number to which the data belong to?
Thanks in Advance.
Regards,
Rosa FerrandoHi Rosa,
Please go through the following links. It will help you.
<a href="http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm">http://help.sap.com/saphelp_crm50/helpdata/en/20/a4ffee7e0fcc4ebb7e5466d3903d38/frameset.htm</a>
<b>Reward points if it helps.</b>
Regards,
Amit Mishra -
Difference between semantic and key fields in DSO
Hello All,
Please help me in understanding about difference between "Key fields" and "Semantic key" in write optimize DSO.
thanksHi,
you dont have key fields in write-optimized DSO, key fields terminology is forin standard DSO.
And semantic key is used in write-optimized DSO.
As we know standard DSO is a flat structure similar to transparent tables that we have in R3/ECC system with key fields (combination of values which needs to be unique).
Now, The system generates a unique technical key for the write-optimized DataStore object. The standard key fields are not necessary with this type of DataStore object. If there are standard key fields anyway, they are called semantic keys so that they can be distinguished from the technical keys. The technical key consists of the Request GUID field (0REQUEST), the Data Package field (0DATAPAKID) and the Data Record Number field (0RECORD). Only new data records are loaded to this key.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm -
Add key fields for FM REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi everyone,
I would like to ask if it is possible or is there a way to increase the number of key fields used in FM REUSE_ALV_HIERSEQ_LIST_DISPLAY. The table parameter for the key fields is IS_KEYINFO. It can only contain 5 key fields. My program needs to have 7 key fields. I cannot modify type group SLIS to add more fields in its type declaration since it is a global object.
Thanks,
EricHi everyone,
I would like to ask if it is possible or is there a way to increase the number of key fields used in FM REUSE_ALV_HIERSEQ_LIST_DISPLAY. The table parameter for the key fields is IS_KEYINFO. It can only contain 5 key fields. My program needs to have 7 key fields. I cannot modify type group SLIS to add more fields in its type declaration since it is a global object.
Thanks,
Eric -
To create Dynamic Selection screen using Key Fields
Hi All,
We have a requirement where we want to create Dynamic selection screen using Key fileds of Z-table or any standard table.
Please provide some solution if you have worked in this area.
Thanks in Advance,
Anand Raj KurubaHi,
You can use the following statement.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR NODE|TABLE <node>.
declares a node <node> of a logical database for dynamic selections in the selection include.
To use the dynamic selections in the SELECT statements of the subroutine PUT_<node>, you must use the data object DYN_SEL. The data object DYN_SEL is automatically generated in the logical database program as follows:
TYPE-POOLS RSDS.
DATA DYN_SEL TYPE RSDS_TYPE.
You do not have to program these lines yourself. The data object DYN_SEL is available in the database program but not in a connected executable program.
The type RSDS_TYPE of the data object is defined in the type group RSDS as follows:
TYPE-POOL RSDS.
WHERE-clauses ------------------------------
TYPES: RSDS_WHERE_TAB LIKE RSDSWHERE OCCURS 5.
TYPES: BEGIN OF RSDS_WHERE,
TABLENAME LIKE RSDSTABS-PRIM_TAB,
WHERE_TAB TYPE RSDS_WHERE_TAB,
END OF RSDS_WHERE.
TYPES: RSDS_TWHERE TYPE RSDS_WHERE OCCURS 5.
Expressions Polish notation ---------------
TYPES: RSDS_EXPR_TAB LIKE RSDSEXPR OCCURS 10.
TYPES: BEGIN OF RSDS_EXPR,
TABLENAME LIKE RSDSTABS-PRIM_TAB,
EXPR_TAB TYPE RSDS_EXPR_TAB,
END OF RSDS_EXPR.
TYPES: RSDS_TEXPR TYPE RSDS_EXPR OCCURS 10.
Selections as RANGES-tables -----------------
TYPES: RSDS_SELOPT_T LIKE RSDSSELOPT OCCURS 10.
TYPES: BEGIN OF RSDS_FRANGE,
FIELDNAME LIKE RSDSTABS-PRIM_FNAME,
SELOPT_T TYPE RSDS_SELOPT_T,
END OF RSDS_FRANGE.
TYPES: RSDS_FRANGE_T TYPE RSDS_FRANGE OCCURS 10.
TYPES: BEGIN OF RSDS_RANGE,
TABLENAME LIKE RSDSTABS-PRIM_TAB,
FRANGE_T TYPE RSDS_FRANGE_T,
END OF RSDS_RANGE.
TYPES: RSDS_TRANGE TYPE RSDS_RANGE OCCURS 10.
Definition of RSDS_TYPE
TYPES: BEGIN OF RSDS_TYPE,
CLAUSES TYPE RSDS_TWHERE,
TEXPR TYPE RSDS_TEXPR,
TRANGE TYPE RSDS_TRANGE,
END OF RSDS_TYPE.
For more information, please check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/67/93b80914a911d2953c0000e8353423/content.htm
Regards,
Ferry Lianto -
Key Fields for Vendor as a Customer
Hi experts,
I have to develope report for vendor payment, my senario is as follows
- vendors which are also our customers,
- payments done at every 15 days
- I have to develope the payment summary report for this please tell me which are the key fields to be used for vendor as a customer to develope this report.
- some deductions are carried out in MM side and some are carried in SD side
Regards
AmolHI,
Vendor Number - LIFNR
Customer Number - KUNNR
These are from table LFA1.
Also from the finance side use tables for payment details regup and reguh
also please check on bsad bsas bsed bseg bses bsik bsis tables.
Thanks& Regards,
Kiran -
Corporate Account/Group Key field in SD Reports?
Hi,
We would like to start populating the Corporate Account field on the General Data > Internal Control tab of the customer master. This field is available in FI reporting (FBL5N - as Group Key) but does anyone know if it is available in SD reports? We can't find it...
Thanks in advance!
SDUser_2011Hi SD User
Check : KNA1-KONZS(Group Key)
Regards,
Krishna. -
How to enable all fields in DTP Semantic Group....
Hi
In BI, for one of my Master Bearing Infoobjects DTP-> Semantic Group is enabled for all fields. But for 2nd master bearing infoobject, only its primary keys are enabled & non-primary keys r disabled in its semantic group. Even both structure have same DTP settings and both have data.
Could u pls. let me know why is it so & how can i enable all fields in semantic group.
Thanks...Hi Harpal,
What are your target and source objects?
Take a look to the following link.
[http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/42/fa50e40f501a77e10000000a422035/frameset.htm]
Choose This graphic is explained in the accompanying text Semantic Groups to specify
how you want to build the data packages that are read from the source (DataSource or
InfoProvider). To do this, define key fields. Data records that have the same key
are combined in a single data package.
This setting is only relevant for DataStore objects with data fields that are
overwritten. This setting also defines the key fields for the error stack.
By defining the key for the error stack, you ensure that the data can
be updated in the target in the correct order once the incorrect data
records have been corrected.
Regards, Federico -
No key field found for creation of DataSource - Classification Datasource
Hello,
While trying to create a clasiffication datasource based on 0PLANT_ATTR, when i assign a characteristic and push the DataSource button, i get the following message:
No key field found for creation of DataSource
Diagnosis
During generation of a classification or configuration DataSource, only those key fields for the object table (field "Obj.Tabelle") that are already present in the basis DataSource transferred to the extract structure. This is the case when none of the key fields of the object table were found in the structure of the basis DataSource.
System response
A DataSource cannot be created without key fields. The action was cancelled.
Procedure
Check whether you have selected the correct basis DataSource and object table. For more information, please see SAP Note 569849.
Do you know what can be the problem?
Thank you and regardsHi Alberto,
plants are a special case. The key which is used for the classification
of plants (object type BETR) is not the same as the key which is used in
datasource 0PLANT_ATTR.
BETR has key LOCNR (Site). That's a customer related to a plant. The
customer number will be extracted in field LOCNR.
0PLANT_ATTR extracts the plant in its key field WERKS.
Transaction CTBW and the generic extraction program for classifications
don't know the relationship between LOCNR and WERKS. So they cannot map
them.
I do recommend a solution which would add the mapping between
LOCNR and WERKS:
1. Create please the classification datasource as intended, but use
datasource 0RT_LOC_MGR_ATTR as basis datasource. It's the only
datasource of the content where LOCNR is a key field. So
0RT_LOC_MGR_ATTR is used as a dummy here, to allow transaction CTBW to
create the classification datasource. It's not necessary to extract
data with datasource 0RT_LOC_MGR_ATTR.
2. Extend please the extract structure of the created classification
datasource. Add please field WERKS using component type WERKS_D. Make
this field visible.
3. Fill field WERKS in the extractor user exit EXIT_SAPLRSAP_002. WERKS
can be read from table KNA1 by using the customer number extracted to
LOCNR to select on field KNA1-KUNNR.
4. Transaction CTBW_META on the BW system isn't able to append the
characteristics from the classification datasource to infosource
0PLANT, because the keys are different. So create please a new info
source with CTBW_META. This allows CTBW_META to create the info objects
for the characteristics used in the classification datasource.
5. Add please the characteristics used in the classification datasource
to infosource 0PLANT manually. You will find the info object names of
the characteristics by looking up the characteristic datasources which
are assigned to the classification datasource in transaction CTBW. From
these names you can derive the info object names:
1CL_A... -> C_A...
6. Disconnect the infosource which has been created with CTBW_META from
the classification datasource.
7. Connect please the classification datasource to infosource 0PLANT
Use following info object:
info object field
0PLANT WERKS
The info object names for the characteristics are explained in step 5.
8. Add an infopackage to infosource 0PLANT for the classification
datasource.
Now the extraction of classifications of sites should work.
Best regards,
Rolf
P.S. I saw the system messed it up and doesn't display any new and empty lines. Sorry, I hope you still can read it.
Edited by: Rolf Doersam on Mar 26, 2010 6:56 PM -
GRC CUP - How to add a custom field in "Select Roles/Groups" form
Hi Forum,
I created a custom field "REGION" in CUP configuration. I used this field in "Role Attributes"
In "New Account" workflow, when i click on Select Roles/Groups" a screen for Select Roles/Groups will display to select the roles by different combinations.
I need this "REGION" field in the above selection creria to select roles by REGION.
How to make this field "REGION" appear in above selet cretiria.
Thanks,
RAM
Edited by: Ram.Sathish on Apr 21, 2011 3:46 PMyou can not add custom fields in the search, have you thought about using the company field as the fied for location?
Regards,
Chinmaya -
How to set a key field in a local provider for BW workspace
Hi Experts,
I've created a local provider through BOBJ analysis for excel / Workspace designer in a BW workspace. However, all the dimensions by default are not having the key field enabled and I'm not able to enable the key field through BW workspace. Also I see the Fact Index Without Key is enabled by default in technical settings, which is not allowing me to select "Fact Index with Key" either. When I go to edit mode, it says "Analytic Index XXX can only be changed in workspace designer". I even tried to go into workspace designer and by selecting the necessary local provider, I coudn't find an option under Local Provider->Reload Provider->Reload (With Changes)->Choose File->Edit Columns to enable the key field(s) for the dimensions.
Can you please help to locate how to enable the key field for dimensions in local provider.
Thank you in advance.
Regards,
KarthikThere's nothing to solve. If Reader (XI only) is used only PDF files can be selected. This is how it's supposed to work (although I agree it's silly and should be changed).
Maybe you are looking for
-
Not to print "No Entry" in list view. How ?
Hi and sorry if this has been asked before (just couldn't find the thread). Printing a list view of a calendar works fine, except iCal prints each and every day ... So on some calendars I have endless days with "No Entry". Is there a way to tell iCal
-
Common screen problem while playing games in Windows 7 x64
When I start games like Red Alert2 and alot others, the game doesn't show properly as some times the screen goes black or the buttons or menues doesn't show at all Some other forums adviced to make these steps Right click on Desktop Select Screen Res
-
Import json file to sql server
I have 1000 records in text file. My requirement is to insert data into sql server. For that, if i can convert to xml or push to script component also fine. Text file consists in this format... [{"ID":1,:"Name":"test1","State":"AP"},{"ID":2,:"Name":"
-
How to stop the background job "Sap_collector_for_job_statistic"
Dear All, Kindly let me know how to stop the Background job "Sap_collector_for_job_statistic" which is running everyday. We want to stop this background job. Kindly suggest. Regards, Mullairaja
-
Query Error LIKE [ac]
I Need to reserch a customer's name where his name is "Joco". I would Like to research the field's name with these options: "Joco" or "Joco" I Wrote this query but Oracle doesn't support: SELECT name from customer where name like 'Jo[ac]o' Can anyone