Selecting separate input and output devices!
hi, i have logic pro 8 and cant find out how to select separate devises for input and output!
for my output (and input when recording drums) i use a alesis multimix 16 (16 track firewire desc) but for recording guitars and bass and poss vocals i would like to use my line 6 x3 live as my input devise but still using the alesis for monitoring.
is this possible? cant figure how to do it.
any help is great help! cheers, Dan
In Logic 9 you can easily select different input and output devices in the Preferences Devices area. In Logic 8 you must create an aggregate device -
http://support.apple.com/kb/HT1215
JG
Similar Messages
-
I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match. How do I fix this?
I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.
-
Hi, I tried to set up a new output audio device on my mac that would have multiple outputs (iBox Twist speaker and my internal speaker) but when I went to click onto one of the iBox Twist (there were 2 options available: iBox Twist and iBox Twist Stereo), Audio MIDI Setup crashed and when I finally got that back open, I found that there were no audio input or output devices to be found. My sound is working, as when I turn on my iMac, the starting sound still plays, however the volume control in the menu bar is no longer a black colour, but grey and when I try to change the sound on my keyboard it does not change. This already happened to me once, and after 3 hours I managed to fix it very simply (switching off Mac, unplugging power cord, leaving for 15 seconds, plug power cord back in and switch Mac back on, holding Alt, Cmd, P and R keys until you hear the Starting Up sound twice) however this same technique that fixed it once before is not working this time and I am still stuck without sound. I have tried Repair Permissions, rebooting in Safe Mode, Hardware Test and checking for Software Updates. Has anyone else had this problem and managed to fix it?
Thanks in advance for any help anyone can give me!In case anyone has had the same problem as me, I have just managed to fix this by doing the following:
Switch off Mac
Switch back on in Safe Mode (Hit power button, then hold Shift key until a loading bar appears at the bottom of the screen).
Switch off Mac again
Remove power cord and wait 15 seconds
Plug power cord back in and hold down the keys alt, cmd, p, r all at the same time until you hear Starting chime for a second time and hopefully your audio will back. -
Where is the ROM memory, input and output devices located on personal computers (laptops)
I have an assignment due that requires I locate the ROM memory and input/output devices. Where can i find these items?
AmandaIf this is your homework, please complete it yourself. We're not here to help you avoid studying.
-
The sample rates of the audio input and output devices do not match.
I am trying to record line-in audio and keep getting this error. have a realtek sound card. I have tried everything I know but cannot record. please help if you can, thanks.
Setting the Sample Rate in Windows Vista and 7
-
Sample rate off the audio input and out devices do not match - what to do?
This is fundamental, I know, but nevertheless I can't find my way around it. I get this error message when trying to recor:
Sample rate off the audio input and out devices do not match
and am asked to do this:
Use the appropriate operating system or audio device control panel to adjust the sample rates of the input and output devices to use the same settingt.
I have defined the sample rate to 44.1/16 bit in accordance with my inbuild soundcardt.
I am trying to record from LineIn.
When running on a M-Audio sound card I don't face any problems.
HP 8560W, sound card IDT/High definition audio Codec
Any suggestions?
Knud
CopenhagenYou're sure you have set BOTH the input and output settings to 44.1 16 bit?
Which version of Windows are you running? There are a number of posts on this forum about how to fully access both the Windows Mixer and the Mixer for your soundcard. Especially, you need to ensure that all "Windows Sounds" are turned OFF. -
Input and output on same device, producer/consumer structure
Hello interested people,
I have a question about using the same device for both digital inputs
and outputs. I have written a simple program of one while loop
that continuously polls the device, processes, and requests. I
have addressed the device using two DAQmx Asst. and I have attached
them with their error in/out cluster terminals to provide data flow and
eliminate the chance of addressing the devices at the same time (which
produces an error). Now I want to change this program structure
to a producer/consumer loop foundation with state machine.
In this design, I will have the DI in the producer loop and the DO in
the consumer loop, under one of the states. I can't simply
connect the error in/out ports in this configuration, so my question is
how to avoid the error caused by addressing the same device
simultaneously with two different tasks (input and output)? I
have attached two VI's, the "One Loop" vi is the original configuration
(simplified), and the Producer-Consumer vi is a NONSENSICAL program
that simply represents the desired configuration. (I don't need
any comments on the programming of this vi, it is only an example for
illustration of the problem).
I am thinking about bundling the input data and the error cluster, both
from the PXI 6528 DI, into one cluster, queueing that up, and
unbundling the de-queued elements for some kind of data flow between
the producer loop and the "Request" state of the consumer loop.
Is this the right approach, or am I barking up the wrong tree?
Thanks
Attachments:
One Loop DO DI.vi 102 KB
Producer-Consumer DI-DO.vi 106 KBHello,
It sounds to me like you really have two modes:
1. user interface actions determine execution
2. user interface is locked, and execution is automated.
I think it would make sense to use the producer consumer for an architecture. Basically you would do the following:
1. program the producer to handle the user interface as you normally would.
2. provide one additional event case in the producer which would be your "automated handling" case. In that case, you could put a state machine which could run until whatever conditions were met to put your program back in "user interface mode".
Keep in mind that you can use custom USER EVENTS to programmatically generate events ie. you can trigger the start of your "automated handling" form anywhere in your code at virtually any time.
I think this would allow you to take advantage of the producer consumer architecture in its intended spirit, while integrating an automated routine.
I hope this helps!
Best Regards,
JLS
Best,
JLS
Sixclear -
I use a Mac 2003 FW800 MDD desktop with dual 1.25 GHz processors, 2 GB memory, and a native Bluetooth card installed. I use OS10.4.11. The FW800 was the only MDD that could use Bluetooth natively, as an optional installation. I use the installed Bluetooth to run an Apple Aluminum Keyboard, and would like to use it with a new (2010) Samsung SBH-600 Bluetooth Headphone set, but, although the set will pair with the computer, and is recognized in both the System Profiler, and the Bluetooth section of System Preferences, it is not recognized in the Sound preferences section of System Preferences as either an Input or Output device. Only the installed external Apple speakers are recognized. I'd like to know if there is anything that can be done to make the Bluetooth system installed work with these headphones - either something that can be changed in the computer settings, or an added external Bluetooth device with different Bluetooth capabilities.
It it may be that you are running either an outdated BT software or the firmware of the card is not up to date.
What version is your BT software? Is it later than 1.5?
http://support.apple.com/kb/DL1209
Firmware:
http://support.apple.com/kb/DL354
Along with the firmware, it is likely that the headphones require a later BT revision than you are running. The headphones need rev.2.
You may need to move to Leopard for support.
http://support.apple.com/kb/DL889
It also may be that headphone support is limited to iChat or the like in Tiger.....
If you go to a USB BT dongle, D-Link often gets the nod as having native compatibility in OS X. -
Data types used in a sub VI - selecting the correct input and output types?
data types used in a sub VI - selecting the correct input and output types?
I can never work out how to choose an input or output format for Subvi's.
I want to create a SubVI for the code in red. I needs an VI Server Reference compatible input and an output that goes to a waveform.
Thanks in advance.
Attachments:
data types.PNG 11 KBGerdW,
I realise now I have taken us in the wrong direction. apologies for that.
History, this is not my code and I do not own the process and NOT my preferred method of using it. I was looking for a simple way to make subtle changes.
What we do - We use these programs to collect data from typically 6 pressures and 6 temperature probes and capture RS232 / USB VISA strings from sensors.
So every few weeks / months or up to a year we rearrange each sensor location to suit the new process. I did not write the code. I cannot change the procedure too much without resistance.
So headers in the CSV file have the DaqMX string passed through the code. Great.
Other data to the CSV file comes from calculations or extracted from the VISA string. Hence why we have headers with "Untitled 1 ()". These values also go to a History Chart.
So I was looking for a simple way to read the the local variable label as it is always linked to the front page indicator. People can cope with editing the indicator label, save the VI and hit run.
TL;DR - GerdW is now a psychologist.
Attachments:
data to csv and history chart.png 1043 KB -
I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
How can I use a different driver for audio input and output?
I did a search of course, and came up with something about an aggregate. I have no idea what this is, how to do it, or if it would even work for me.
What I am trying to do is:
1) Record into Logic Express using my Tascam US-122.
2) Have playback come out of my computer sound system, not the Tascam.
If I go over to the Audio setup window, I can only record when the driver is set to Tascam US-122. Likewise, I can only listen to sound when my Built-In Audio is selected. It gets rather annoying going between the two.
So, would this aggregate thing solve my problem? If so, how do I do it? Thanks for any help!
-allenYes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices. -
How to use a bluetooth cellphone for audio input and output
Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
Thanks!Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices. -
FINALLY INPUTTING and OUTPUTTING Annotations!
Ok, before everyone thinks that this is a very bad solution, I have to tell that I`m no programmer and my knowledge of PostgreSQL, Ruby or any other language is very poor.
With useful help from Jamie Hodge, fbm and Nicholas Stokes (mainly)
I could manage to write a command for inputting and outputting from Final Cut Server Annotations.
So lets go to the fun part:
INPUTTING:
1- Create a Response called "Annotations IN" (or whatever you want):
a - Reponse Action: "Run an external script or command"
b - Run Script > *Commnad Path: /Library/Application Support/Final Cut Server/Final Cut Server.bundle/Contents/Resources/sbin/fcsvr_run
Command Parameters: psql px pxdb -c "COPY pxtcmdvalue FROM '/FCSRV/annotation-in.txt' USING DELIMITERS '|';"
2 - Create a poll Watcher with name: "Watch for Annotations IN"
a - Enable: true
b - Monitor Address: Chooses a Device (create a new one or use a tmp one) and path to where you`ll going to put a txt file with the annotations.
c - Response List: Choose the Response you created "Annotations IN" in my case.
d - Event Type Filter: Created, Modified
e - Poll Watcher > Listing Frequency: 2 (or any number of seconds you feel like it).
Listing multiple: 2
Wildcard include Filter: *.txt (or any custom extensions you want)
3 - Create a txt file and use this as a template:
{ASSET_ENTITYID}|1527|{TCIN}/(30000,1001)|{TCOUT}/(30000,1001)|{Annotation}|{USE RID}|{DATE}
Where:
{ASSET_ENTITYID} = Is the entityid of your asset. You can find what number it is by issuing:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT pxmdvalue.entityid, pxmdvalue.value AS asset_name FROM pxmdvalue INNER JOIN pxentity ON pxentity.entityid = pxmdvalue.entityid WHERE pxmdvalue.fieldid='1543' AND pxentity.address LIKE '/asset/%';"
This will output ALL your assets, so if you know the name or want to parse the name you can use:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT pxmdvalue.entityid, pxmdvalue.value AS asset_name FROM pxmdvalue INNER JOIN pxentity ON pxentity.entityid = pxmdvalue.entityid WHERE pxmdvalue.fieldid='1543' AND pxmdvalue.value='ASSETNAME' AND pxentity.address LIKE '/asset/%';"
Where in ASSETNAME you`ll have to put your Asset Name without extension.
{TCIN} and {TCOUT} is, of course, the TC`s points. In the form of: HH:MM:SS;FF
{Annotation} is the commentary.
{USERID} (in my case was 1)
{DATE}: This one is tricky. My example is 2009-03-15 19:31:15.839795-03
So is in the form YYYY-MM-DD HH:MM:SS.????? I really don`t know the rest. Could be milliseconds?
Of course one can write a script to translate everything from a txt file like:
ASSETNAME | TCIN | TCOUT | ANNOTATIONS | USER
But as I`ve said I`m no programmer
Ok.. now the time for the OUTPUT:
The command-line is:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT pxmdvalue.value AS Asset_NAME, pxtcmdvalue.value, pxtcmdvalue.begintc, pxtcmdvalue.endtc FROM pxmdvalue INNER JOIN pxtcmdvalue ON pxmdvalue.entityid = pxtcmdvalue.entityid WHERE pxmdvalue.value='ASSETNAME';"
Where ASSETNAME is the Asset name without the extension.
Or issuing the following to OUTPUT ANNOTATIONS from ALL assets:
/Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "select * from pxtcmdvalue;"
Adding "> /PATHTO_WHERE_IN_WANT/ANNOTATIONSOUTPUT.TXT" at the end will put all output into a txt file.
It`s possible (in theory) to:
1- Create a boolean md field in FCSRV called "EXPORT Annotations" (don`t choose lookup)
2- add or create a md group called "Export Annotations" and add the above md field to it (don`t choose lookup)
3- Add "Export Annotations" md field to Asset Filter md group
4- Make a Response for Running external command. Command path: /Library/Application Support/Final Cut Server/Final Cut Server.bundle/Contents/Resources/sbin/fcsvr_run
Command Parameters: psql px pxdb -c 'SELECT pxmdvalue.value AS Asset_NAME, pxtcmdvalue.value, pxtcmdvalue.begintc, pxtcmdvalue.endtc FROM pxmdvalue INNER JOIN pxtcmdvalue ON pxmdvalue.entityid = pxtcmdvalue.entityid WHERE pxmdvalue.value=[FileName];' > ~/Desktop/ann-out.txt
(I`m having problem with this, it doesn`t work).
5- Make a Subscription that if Export Annotations modified = true, trigger if changed and trigger the Response above.
6- Add exporting annotations md group to Media md set.
In theory it`s possible to modify the FinalCutServerIntegrationSample get and input annotations instead of adding another "comment" field to md group list.
Few!
Ok so please help beautify this out!
This will be very useful for a lot of people.... We know that it`s only a matter of time to FCSVR have this function built-in... but this "time" could be years.
So let`s start ourselves!
Thank you very much!!
Regards!AlphaBlue wrote:
jverd wrote:
What were you hoping for? Someone reading your mind for what exactly you need, and handing you a giftwrapped answer, without you doing any work or clearly communicating a specific problem? This site doesn't really work that way.Fair enough. I'm asking for insight into how to input from and output to a StarOffice Spreadsheet into/from a Java program. (Think java.io except with spreadsheet files instead of .txt files.) I already answered that question.
I need to accomplish this without the use of a community-created library.That's a bizarre requriement. Why?
>
Okay, [here you go|http://lmgtfy.com/?q=communication+between+StarOffice+Spreadsheets+and+Java].
If you don't have any knowledge or experience, on the matter, please refrain from directing me to a google search. I assure you, I have already performed such a task.How would I know that.
But okay, let's say I know that. Let's say you bothered to point out that you've already done that. Further, let's say I do have knowledge of the subject at hand. Maybe I'm an expert. Maybe I wrote Star Office and an open source library (which wheel for some reason you must reinvent). You are assuming that I also have psychic powers, so that I can read your mind and know exactly what you've read so far and exactly what parts of your very broad and vague question said reading did not answer.
In short, you have received answers commensurate with your questions. -
NI error -201133; Input and output on the NI9401
Former user of Matlab, it is the first time I try to work with the DAQ and national instrument. My device is a NI9401.
I want to record the position of 1 optical encoders. For this , the encoder is connected to counter in the 9401.
Here is how I proceed:
1/ I open a new DAQ session
2/ I add a counter channel, in order to make a clock (because, as I understood, to do a startForeground I have to configure a clock which will be associated with my data recording, am I right?
3/ I add a counter channel in order to have the data corresponding to the position of the encoder. But at this time I have the error message about the session reserved.
here is the code
//first I do the clock
ClockFreq=100;
sClk=daq.createSession('ni');
sClk.addCounterOutputChannel('cDAQ1Mod5',0,'PulseGeneration');
clkTerminal=sClk.Channels(1).Terminal;
sClk.Channels(1).Frequency=ClockFreq;
sClk.IsContinuous=true;
sClk.startBackground
//then
I configure the data input
s=daq.createSession('ni')
s.addCounterInputChannel('cDAQ1Mod5'),1,'Edgecount')
At this time I have the NI error -201133 message
Devices cannot be configured for input or output because lines and/or terminals on this device are in use by antoher task or route. This operation requires temporarily reserving all lines and terminals for communication, which interferes with the other task or route.
If possible, use DAQmx Control task to reserve all tasks that use this device before committing any tasks that use this device. Otherwise, uncommit or unreserve the other task or disconnect the other route before attempting to configure the device for input or output.
device : cDAQ1Mod5
Digital Port:0
Lines:3
Thus, my question is :
1/how can I configure both output clock and input counter in NI9401 directly using Matlab?
Thanks for your help.If you want to do clocked counter input measurements you need to specify an external clock OR (if available) you can add an analog input channel from another module on the same chassis -- in this case the session shares an internal clock with both modules.
The external clock can be generated by a counter output channel in pulse generation mode, as you had session sClck configured. However, ther error you are running into could be due to using channels from the same counter subsystem (on the same module) in two separate sessions.
Can you try using the counter output channel from another module (if available)?
s = daq.createSession('ni');
s.addCounterInputChannel('cDAQ1Mod5', 1,'EdgeCount');
s.addClockConnection('External', 'cDAQ1Mod5/PFI2', 'ScanClock');
extClockFreq = 1E+3;
% this should match the frequency of the external clock
s.Rate = extClockFreq;
s.DurationInSeconds = 1;
[data, timestamps] = s.startForeground;
The alternative to using an external clock, as I mentioned, is to have one session with one counter input channel and an analog input channel from another module on the same chassis -- in this case the session shares an internal clock with both modules, so no external clock needs to be provided. Please see the following example:
http://www.mathworks.com/help/daq/examples/count-pulses-on-a-digital-signal-using-ni-devices.html -
Table name input. and output i need all rows and columns using procedures
hi,
question: table name input. and output i need all rows and columns by using procedures.
thanks,
To AllAn example of using DBMS_SQL package to execute dynamic SQL (in this case to generate CSV data in a file)...
As sys user:
CREATE OR REPLACE DIRECTORY TEST_DIR AS '\tmp\myfiles'
GRANT READ, WRITE ON DIRECTORY TEST_DIR TO myuser
/As myuser:
CREATE OR REPLACE PROCEDURE run_query(p_sql IN VARCHAR2
,p_dir IN VARCHAR2
,p_header_file IN VARCHAR2
,p_data_file IN VARCHAR2 := NULL) IS
v_finaltxt VARCHAR2(4000);
v_v_val VARCHAR2(4000);
v_n_val NUMBER;
v_d_val DATE;
v_ret NUMBER;
c NUMBER;
d NUMBER;
col_cnt INTEGER;
f BOOLEAN;
rec_tab DBMS_SQL.DESC_TAB;
col_num NUMBER;
v_fh UTL_FILE.FILE_TYPE;
v_samefile BOOLEAN := (NVL(p_data_file,p_header_file) = p_header_file);
BEGIN
c := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(c, p_sql, DBMS_SQL.NATIVE);
d := DBMS_SQL.EXECUTE(c);
DBMS_SQL.DESCRIBE_COLUMNS(c, col_cnt, rec_tab);
FOR j in 1..col_cnt
LOOP
CASE rec_tab(j).col_type
WHEN 1 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
WHEN 2 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_n_val);
WHEN 12 THEN DBMS_SQL.DEFINE_COLUMN(c,j,v_d_val);
ELSE
DBMS_SQL.DEFINE_COLUMN(c,j,v_v_val,2000);
END CASE;
END LOOP;
-- This part outputs the HEADER
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_header_file,'w',32767);
FOR j in 1..col_cnt
LOOP
v_finaltxt := ltrim(v_finaltxt||','||lower(rec_tab(j).col_name),',');
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
IF NOT v_samefile THEN
UTL_FILE.FCLOSE(v_fh);
END IF;
-- This part outputs the DATA
IF NOT v_samefile THEN
v_fh := UTL_FILE.FOPEN(upper(p_dir),p_data_file,'w',32767);
END IF;
LOOP
v_ret := DBMS_SQL.FETCH_ROWS(c);
EXIT WHEN v_ret = 0;
v_finaltxt := NULL;
FOR j in 1..col_cnt
LOOP
CASE rec_tab(j).col_type
WHEN 1 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_v_val);
v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
WHEN 2 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_n_val);
v_finaltxt := ltrim(v_finaltxt||','||v_n_val,',');
WHEN 12 THEN DBMS_SQL.COLUMN_VALUE(c,j,v_d_val);
v_finaltxt := ltrim(v_finaltxt||','||to_char(v_d_val,'DD/MM/YYYY HH24:MI:SS'),',');
ELSE
v_finaltxt := ltrim(v_finaltxt||',"'||v_v_val||'"',',');
END CASE;
END LOOP;
-- DBMS_OUTPUT.PUT_LINE(v_finaltxt);
UTL_FILE.PUT_LINE(v_fh, v_finaltxt);
END LOOP;
UTL_FILE.FCLOSE(v_fh);
DBMS_SQL.CLOSE_CURSOR(c);
END;This allows for the header row and the data to be written to seperate files if required.
e.g.
SQL> exec run_query('select * from emp','TEST_DIR','output.txt');
PL/SQL procedure successfully completed.Output.txt file contains:
empno,ename,job,mgr,hiredate,sal,comm,deptno
7369,"SMITH","CLERK",7902,17/12/1980 00:00:00,800,,20
7499,"ALLEN","SALESMAN",7698,20/02/1981 00:00:00,1600,300,30
7521,"WARD","SALESMAN",7698,22/02/1981 00:00:00,1250,500,30
7566,"JONES","MANAGER",7839,02/04/1981 00:00:00,2975,,20
7654,"MARTIN","SALESMAN",7698,28/09/1981 00:00:00,1250,1400,30
7698,"BLAKE","MANAGER",7839,01/05/1981 00:00:00,2850,,30
7782,"CLARK","MANAGER",7839,09/06/1981 00:00:00,2450,,10
7788,"SCOTT","ANALYST",7566,19/04/1987 00:00:00,3000,,20
7839,"KING","PRESIDENT",,17/11/1981 00:00:00,5000,,10
7844,"TURNER","SALESMAN",7698,08/09/1981 00:00:00,1500,0,30
7876,"ADAMS","CLERK",7788,23/05/1987 00:00:00,1100,,20
7900,"JAMES","CLERK",7698,03/12/1981 00:00:00,950,,30
7902,"FORD","ANALYST",7566,03/12/1981 00:00:00,3000,,20
7934,"MILLER","CLERK",7782,23/01/1982 00:00:00,1300,,10The procedure allows for the header and data to go to seperate files if required. Just specifying the "header" filename will put the header and data in the one file.
Adapt to output different datatypes and styles are required.
Maybe you are looking for
-
please can someone tell me what to do so i can be able to use my iphone again after updating the ios 6.1.3 software i cant do anything with mt phone again apart from being able to make emergency calls. please help. at first it was a hearing problem w
-
Alphabetically ordering a Linked List
Would anyone please be able to give me help in ordering a linked list alphabetically. I'm new to java so please be gentle. Many thanks in advance.
-
Accidently deleted Photos app using ifunbox, any help?
hi every body, i accidentally deleted Photos app from my iphone 4s running on ios 6.0.1. i tried many tutorials on youtube to restore it but in vain. i am almost convinced that the only way to restore it is via itunes restoration of the whole device.
-
Can I direct connect FIOS service to a TV without any boxes or adapters?
I just built a new small bedroom in my basement, and am about to buy a new 22" flat screen TV that will be hung on the wall. If the cabling is split with a bi-directional splitter, do I need to have another adapter in my house? I already have 2 of th
-
I just bought a new phone that was unlocked and all of that.... It is running v 03.93 RM-146. Anyway, I have installed my Sim card from my Cingular phone service, and it would not work. Is there somthing that I need to do before it will work? I took