Selecting shape after it was Send-to-Back

I cannot select any object after it was Send-to-Back.

I have experimented with a blank page and placed several different shapes on it. I moved one shape to the back using Send to Back and deselected it.
After deselection of the shape Send to Back this shape is not selectable again. There is no way to selected it and move it. The only remedy is to delete the page.

Similar Messages

  • Selecting shapes after being traced

    I have noticed in cs5 that after tracing an image and expanding it, I can sometime select specific parts of the artwork with the Direct Selection tool to apply a fill to a shape, and other times when I click it selects the entire artwork. Sometimes it seems to work and other times not. Is there a reason why it behaves this way after tracing? Is there an approach to this that works more effectively?
    Thanks.

    Just a result.
    For example, you trace black and white artwork with a solid black line around the outside and have "Ignore White" checked in the tracing options. You'll get 1 compound shape. That's it. On the other hand, you trace black and white artwork that has a black edge in placed and contains disjointed figures, you may then get several different pieces.
    The results of a Live Trace are entirely dependent upon the artwork being traced and the settings used to trace. There is no solid rule to always get the same resulting shapes.

  • Trying to purchase music, it sends me to verify my acct info, I do that hit done, it asks if I still want the purchase, I select Yes and it sends me back to verify billing information.  How can I get out of this darn loop and make my purchase?

    In itunes Store. Trying to purchase music, it sends me to verify my acct info, I do that, hit done, it asks if I still want the purchase, I select Yes and it sends me back to verify billing information.  How can I get out of this darn loop and make my purchase?

    Hi itunes for windows,
    If you are being repeatedly prompted to authorize iTunes, even after you have already done so, you may find the following article helpful:
    Apple Support: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Regards,
    - Brenden

  • How do I get spell check back on after firefox was updated? Thanks

    How do I get spell check back on after Firefox was updated?

    Not all locales come with a dictionary installed due to licensing reasons.<br />
    If you do not have the en-US locale then check that you have a dictionary installed (Tools > Add-ons > Extensions) and selected.
    You can see which dictionary is selected if you right-click in a text area and open the Languages submenu.<br />
    You can open the "Add Dictionaries" link to install a dictionary if you do not have one.<br />
    Make sure that [X] "Check Spelling" in the right-click context menu has a tick.<br />
    You can enable or disable spell checking globally:
    * Tools > Options > Advanced : General: Browsing: "Check my spelling as I type"
    See also:
    * https://support.mozilla.com/kb/Using+the+spell+checker
    You can look here for dictionaries:
    * https://addons.mozilla.org/firefox/language-tools/

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    Start up in Safe Mode.
    http://support.apple.com/kb/ph14204
    Repair Disk    Section: "Try Disk Utility"
    http://support.apple.com/en-us/HT203176

  • I was sending a text and then the screen went blank with the white apple.  I turned my iphone back on and all my texts  and contacts were gone.  How can i get my text messages back?

    My friend was sending a text with a pic as an attachment and then suddenly, she got a blank screen with the white apple logo and it then shut off.  When she turned it back on, she discovered all her texts and her contacts were missing.  How can she get them back?  She's got a iOS 4.3.5 with a 16GB iPhone 4. 

    Connect to the computer she regularly syncs to, right click on the iPhone's name in iTunes, and choose "restore from backup".

  • HT1766 please help...we updated ipod2 4.1 to IOS 5.1 at itunes...after it was finished only the contacts were restored...not the music & videos...we found the backed up data in the pc(windows 7)after entering %appdata%..pls help how to restore..thanks!God

    please help...we updated ipod2 4.1 to IOS 5.1 at itunes...after it was finished only the contacts were restored...not the music & videos...iwe found the backed up data in the pc(windows 7)after entering %appdata%..pls help on how to restore...we will appreciate it very much....thanks! God bless!

    The iPod backup that iTunes makes does not include synced media like app, music and videos. Thus, you wll have to resync those back to your iPod.
    If necessary you can redownload iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Back to selection screen after error

    Hello ABAPers,
    I have a executable program (REPORT) to do some processing (e.g. read a standard table with the parameters and select-options and save the data in a Z table).
    When occurs an error (e.g. when sy-subrc <> 0 after select) and a message of type E is showed, the program show the message in a "clean" screen with title SAP. Then, after ENTER or ESC, it leaves to initial screen of SAP (SAP Easy Access).
    The message of type E is triggered from a routine (FORM) called from START-OF-SELECTION event. And the program don´t write nothing in list (only return a status message if everithing is ok).
    How can I force the program to back to selection screen after some error?
    Thanks in advance.
    Best regards,
    Charles Oliveira

    hi,
    Do the following for your requirement.
    in the message give the following
    start-of-selection.
    Perform <routine>.
    Form <routine>.
    if <condition>.
      message 'xxxx' type 'S' display like 'E'.
      exit.
    endif.
    endform.
    This way the control returns to selection screen even after the message is triggered.
    Thanks
    Sharath

  • I want to restore my data after my pad was reset, but the latest backup was 5 months back. What can I do?

    I want to restore my data after my pad was reset, but the latest backup was 5 months back. What can I do?

    There is nothing that you can do. If you don't have a more recent backup, you can't magically create a current backup now. You can use the 5 month old backup, or simply start all over again. You can download most of your purchased content again as long as you use the same Apple ID that you used to make the purchases.

  • The new forced upon me upgrade for iPhoto '11 never opens. After I do all that is recommended, it sends me back to the beginning. How can I get it to work?

    I am using a mac mini version 10.9.5 which I have just updated. Now when I try to open i photo, all I get is a message telling me to "prepare" my library. I have installed and run the iPhoto library upgrader, but it only sends me back to the beginning telling me to install the upgrader (which has already been installed.)
    How can I actually get the upgrader to prepare my libraries and actually see photos?

    What version of iPhoto are you currently running and what version did you have previous to the upgrade to 9.5.1?
    Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • TS1702 Tom tom changes:  Until about a month ago, one of the selections under "Navigate to" was "contacts". That selection is no longer available.  Can I get it back?

    Tom tom changes:  Until about a month ago, one of the selections under "Navigate to" was "contacts". That selection is no longer available.  Can I get it back?

    contact Tomtom

  • HT5037 I followed the above instructions and after I choose the library I want to upgrade and hit continue it wants to open my iPhoto to convert, when I click yes it just gives me the original message and sends me back to this page. Am I missing something

    I am trying to get photos off of my airport time capsule back up onto my new macbook pro. I followed the above instructions and after I choose the library I want to upgrade and hit continue it wants to open my iPhoto to convert, when I click yes it just gives me the original message and sends me back to this page. Am I missing something?

    Is your Time Capsule being used for your TimeMachine back up? Or is it simply being used as an external hard drive?
    To use a TimeMachine back up you must first restore it
    LN

  • Just updated to 8 & now I can't open any web pages & firefox is still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

    See "Hang at exit":
    *http://kb.mozillazine.org/Firefox_hangs
    See "Firefox hangs when you quit it":
    *https://support.mozilla.com/kb/Firefox+hangs
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls

  • I need to get back into my itunes account after it was hacked

    I need to get back into my itunes account after it was hacked several months ago.
    I'd like to redeem a gift card and I set up a new password but it says my ID has been disabled

    You ned to contact the iTunes Store and get them to do it.
    How to report an issue with Your iTunes Store purchase - http://support.apple.com/kb/HT1933 - working through iTunes application and iTunes Store interface.

Maybe you are looking for