Selecting the correct iPhone model

How do I select the correct model (A1429 GSM) when I purchase it online on Apple Canada? I did not see any option till the payment page, so I did not finish the purchase.

Only the A1428 is sold in Canada.
<http://www.apple.com/iphone/LTE/>

Similar Messages

How do I select the correct ram for upgrade to iMac 8,1?

How do I select the correct ram for upgrade on my iMac 8,1? When I look up information online, I believe that I have SO-DIMM ram. Do I need to purchase SO DiMM? I want to upgrade to Maverick and I think I was told that I need DDR2 or SDRAM. My model # is A1224, if that helps.

Welcome to Apple Support Communities
OS X Mavericks requires 2 GB of RAM at least, but I recommend at least 4 GB of RAM.
You have got an Early 2008 iMac. You can buy more RAM at OWC or Crucial. Your Mac supports 6 GB of RAM

TS4006 I have several iphones on find my iphone. How do I know which one is the correct iphone. None of them are labeled Iphone4 or 5 etc.

I just had my iphone stolen from me. In the past I have always set up my phones an ipads on to the find my iphone service. I have never deleted them from the find my iphone account and now I have 3 iphones showing and 2 ipads. How can you tell the difference when none of them are labeled as Iphone 4, iphone 4s, iphone 5, etc. No dates are shown as when purchased so it I can't figure out which one is the correct iphone to put on lost mode and send message to.

Deleting on one device does not affect another device.
You can delete the App's on the iPhone and nothing will happen to the ones on the iPad.
1. You don't need to.
2. Settings->Cellular->"Use Cellular Data For" will show the data usage for each App since the last statistics reset
3. Settings->General->Background App Refresh Will show which Apps are allowed to get data in the background
4. It restricts it to Wifi. If the App requires internet access and Data is turned off, it will have to wait until the device is connected to a wifi network.
5. Nope, You just use up battery since the BT radio will continuously look for nearby BT devices.
6. The Personal Hotspot uses your cellular internet connection from your phone or other cellular device; whether you consider that secure or not I cannot say. It also depends on what you are doing while connected to the Hotel's wifi. I would not do online banking while on vacation though.

Is there any chance that FM reception gets made available on the next iPhone model?

Hi,
I did buy an iPhone 3G then upgraded iPhone 4 but always felt that Apple's devices missed a very useful function (and hoped that it would eventually be made available), FM reception! Now I have that cool iPhone and yet I have to have my iPhone to listen to my MP3s and a FM radio to be able to listen to the gym FM broadcasting or listen to my favorite FM station which doesn't broadcast on the internet! And I definitely don't see myself forking away a hundred on an iPod Nano just because of its FM receiver!!!
Is there a hardware limitation preventing iPhone 4 from receiving FM broadcasting?
Is there any chance that FM reception gets made available on the next iPhone model?
Please give your iPhone customer FM reception!!! PLEASE!!!!!!

We're all just fellow users here and have no idea what Apple might have in mind for future iPhone versions. You can offer your suggestion to Apple via their feedback page, if you wish:
http://www.apple.com/feedback/iphone.html
Regards.

I cannot select the last iPhone backup for a new iPhone restore

why
i cannot select the last iPhone backup for a new iPhone restore?

Hey quarterback45,
Thanks for the question. This usually occurs when your new iPhone is on a earlier iOS version than that of which the backup was created with:
iOS: Unable to restore from backup of a newer device
http://support.apple.com/kb/TS3682
Thanks,
Matt M.

Data types used in a sub VI - selecting the correct input and output types?

data types used in a sub VI - selecting the correct input and output types?
I can never work out how to choose an input or output format for Subvi's.
I want to create a SubVI for the code in red. I needs an VI Server Reference compatible input and an output that goes to a waveform.
Thanks in advance.
Attachments:
data types.PNG ‏11 KB

GerdW,
I realise now I have taken us in the wrong direction. apologies for that.
History, this is not my code and I do not own the process and NOT my preferred method of using it. I was looking for a simple way to make subtle changes.
What we do - We use these programs to collect data from typically 6 pressures and 6 temperature probes and capture RS232 / USB VISA strings from sensors.
So every few weeks / months or up to a year we rearrange each sensor location to suit the new process. I did not write the code. I cannot change the procedure too much without resistance.
So headers in the CSV file have the DaqMX string passed through the code. Great.
Other data to the CSV file comes from calculations or extracted from the VISA string. Hence why we have headers with "Untitled 1 ()". These values also go to a History Chart.
So I was looking for a simple way to read the the local variable label as it is always linked to the front page indicator. People can cope with editing the indicator label, save the VI and hit run.
TL;DR - GerdW is now a psychologist.
Attachments:
data to csv and history chart.png ‏1043 KB

Selecting the correct membership type

Hello,
I am wondering if I selected the correct type of Creative Cloud membership a couple of months ago upon signup.
I am a photographer and use only Lightroom and Photoshop. Upon switching over to Creative Cloud, I selected the "Creative Cloud for Teams" but now I am thinking that this may not have been the best option. I work alone and only need the two apps.
Can I switch my membership to something that makes more sense for my business?
Thanks!

Cancel what you don't want and buy what you do want
Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Special Photography Plan (includes Photoshop & Lightroom & Bridge & Mobile Lightroom)
http://helpx.adobe.com/creative-cloud/faq/mobileapps.html
http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
Contact Adobe to find out how to do this without paying a penalty
Adobe contact information - http://helpx.adobe.com/contact.html

Selecting the correct lot size...

Hi,
I have some problem in selecting the correct lot size, please help me solve it.
The requirement of raw materials per month is 100nos. But the vendor cannot supply them in qty required by us but supply can happen in 1000nos. I cannot purchase all the quantities as materials cannot be kept in store for long period.
Which type of lot size is suitable for this type of scenario. Is there any SAP standards available or configuration is required?
Regards,
Pavan

Hi Pavan,
This is not a lot size issue , but a process issue. You cannot choose a lot size unless you are clear what is the qty for which you expect PR in this case?
Once that is clear, you will get lot size as needed
cheers
Rav

It appears I downloaded CS6 suite windows to a mac. What do i do now? There was no place to select the correct version.

It appears I downloaded CS6 suite windows to a mac. What do i do now? There was no place to select the correct version.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT2188 list of software versions for the different iphone models

where can i find a list of software versions for the different iphone models?

Wikipedia has a list of the original and current iOS for each device
http://en.wikipedia.org/wiki/List_of_iOS_devices

What is the correct CIM model and CR content version to import into SLD?

Hi All,
I just met a difficulty that I can not find the correct import version of CIM model and CR content.
Could anyone share some valuable suggestions?
Situations now:
I installed ECC6 SR3 with ABAP+ Java stacks, after installation successfully, I logged onto SLD through http://xxx:50000/sld
since my CIM model and CR content version is too low, so I want to upgrade it.
The currect version is as below:
Model Version (sld/new):     1.5.24
SAP CR Content Version (sld/new):     SAP_CR 2.0 (produced 03/17/2005)
Namespace     Model Version     Classes     Instances     Associations     Total Objects
sld/active      1.5.24               908     36381     60183             97472
I have read note 669669 carefully and downloaded all the relevant versions before updating, the the results are not correct. something like "Unknow status -1" "import anyway" appears.
So, could anyone tell me the correct update file and sequence?
Thank you very much in advance.
Best regards,
Nick

Hi Raghu,
Thanks for your quick reply.
I have downloaded 5 files:
cimsap51506_0-20005942.zip     SP06 for SAP CR CONTENT UP TO 2009
CRDelta1418_0-10003379.ZIP     SP18 for SAP CR CONTENT 2.0
CRDelta1511_0-10004549.ZIP     SP11 for SAP CR CONTENT UP TO 2007
CRDelta41514_0-10006428.ZIP     SP14 for SAP CR CONTENT UP TO 2008
CRDelta51506_0-20005942.ZIP     SP06 for SAP CR CONTENT UP TO 2009
and the update sequence are the same as above, that is to say, first I update CIM model version successfully from 1.5.24 to 1.5.45, and then, I upload CRDelta1418_0-10003379.ZIP which gave me an error message "Unknown status -1", even how many times I click "Import anyway", it's useless.
after then, I tried to upload CRDelta1511_0-10004549.ZIP directly, but it also refused. warning message is "The selected aggregate import is not applicable to the current content version SAP_CR 2.0 of the target namespace.", I clicked button "Import anyway", but it's useless since there contains 0 objects, I don't know why, the message shows "The import will upgrade the content of export line SAP_CR from the current version 2.0 to version 4.0.
Contains 0 objects."
The file CRDelta1511_0-10004549.ZIP is under SAP CR CONTENT UP TO 2007, why its version is 4.0? is it because I need to firstly update to 3.0? and where can I find version 3.0?
I really appreciate your kind help.
Best regards,
Nick

How to select the correct formula ?

Hi all,
I intend to do one report which will allow user to select from parameter for one field, either is "QTY" or "AMOUNT/VALUE".
If the user select "QTY" then, the report will call the formula defined say cf_1q, if the user select "AMOUNT/VALUE" then it will call formula say cf_1v.
Btw, this two selection will display only one.
How should I do that ?
Rgds
Lim

There are several options:
- You could have only one format trigger that checks the user parameter and returns the correct value.
- You could have a third formula column that checks the user parameter and returns the appropriate formula column
- You could have two fields on top of each other and put a format trigger against each to show only the relevent one.
- You could have one field and a format trigger against that does an srw.set_field_number() call with the appropriate value.
- ...

Selecting the Correct Beginning Preferences for Video in PRE10

Hello,
I am an absolute beginner to PRE10, and am teaching myself from basic training videos at muvipix.com. It is obvious from the first video that selecting the right preferencs for the type of video is extremely important. I have videos from a vado, a flipcam, a droid global 2 and a droid global 3. I know that I can research the type and resolution of video that these cameras put out, but how do I use this information to figure out what to select from the menu that I saw in the video to start my project off with the correct settings?
Thanks, Chris

Being new to PrE, this ARTICLE will offer some learning resources, though at least one (a great one) has been mentioned.
Setting up you Project is very important, and is the first step in learning PrE. Steve Grisetti goes into a lot of necessary details on that, in his Basic Training Series. John T. offers some very useful links on first determining the CODEC inside your Source Files, and how those details will guide you. They might seem to be a "bit much," but trust me, they cover many bases, and necessary bases, and thing will become much easier. Editing Video is not as cut-and-dried, as editing Still Images. There are about 100x the number of variables, and those are important.
This is a necessary first step, and I cannot stress the importance of choosing the right Preset at New Project, as otherwise, there will be issues.
Good luck,
Hunt

What are the correct iphone 5 H.264 export settings?

I have scoured the internet for help trying to find the correct way in which to make a proper H.264 mp4 video file that will play on the iPhone 5. I am using Adobe Premiere CS 6. There exist presets for the iphone 4, but not the iphone 5. I tried the iphone 4 presets but they will not play on the iphone 5.
I tried checking Apple's iphone 5 video specs to make sure I am not over spec: https://www.apple.com/iphone/specs.html, which says: Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Here is how I have my video export settings set up in Adobe Media Exporter and the multiplexer is set to iPod:
I've tried other slight variations, but nothing will play. I am hosting these videos on a site and just trying to access them from the URL bar such as: http://harbourak.us/videos/iOS_mp4.mp4. I cannot use m4v or mov formats because of the flash script that is used on other flash supporting browsers that can convert the mp4 quickly on the fly.
If anyone has any suggestions for how to get this to work I would be greatly appreciative! Thank you!

So yeah, there is no setting I can find that allows you to properly export your video in h.264 .mp4 that will play on the iphone from Adobe Premiere CS6. What is the point? I just don't get it. It's like secretly apple has decided to not allow any mp4 to be downloaded from the web and be played on the iphone, but then lie to everyone when they say on their spec page that the iphone will play mp4s that are 640x480, 30fps, AAC 48kHz, < 2.5Mbps. Ugh, I've exported so many different versions of .mp4s and for each and everyone the iphone says "sorry, broken play button image" and no explanation. So helpful! </sarc>
Okay, you want examples that work FINE in regular PC browsers? Well, I set up a dummy page with the HTML5 embed code here:
http://housemajority.org/wp-content/themes/candidate/video-test.php. Works fine in Safari for Mac & PC.
This currently has the 640x480, 30fps, AAC 48kHz, < 2.5Mbps h.264 codec .mp4. Plays fine in Safri on the PC or Mac but not the iphone. This file completely coorelates with Apple's spec sheet so I'm at a total loss. The actual file can be found here: http://housemajority.org/vids/iOS_30fps.mp4
Other video attempts:
/vids/iOS_preset.mp4 - 29.97 fps before changing to 30fps
/vids/iOS_mp4.mp4 - 720x480 before changing to 640x480. makes no sense
/vids/H264_w29.mp4 - another version of the 720x480 version.
/vids/iOS_converted.mp4 - tried using one of those "convert videos to iphone version" shareware apps that also doesn't work.

Automatically selecting the correct network.

My wife has an G4 iBook. She has a wireless network at work and home. When she turns on her iBook at work, it automatically connects to that network.
At home, the iBook selects our neighbor's network. She has to manually select our home network. We want the iBook to select our home's network not the neighbor's.
What settings do I need to change so it will automatically select the home network not the neighbors, when at home and still automatically select the work network when at work?
Thank you
Power Mac G5 Mac OS X (10.4.7)

The laptop is running 10.3.9. I do not see a preferred network list. I can select the location Home and select by default join, Home in the menu. This works from home. But when she goes to work the laptop does not automatically join the work network so she has to manually select the work network.
Only one location works automatically, the other one must be selected manually.
Am I missing something?
Power Mac G5 Mac OS X (10.4.7)

Selecting the correct iPhone model

Similar Messages

Maybe you are looking for