Selecting the correct lot size...

Hi,
I have some problem in selecting the correct lot size, please help me solve it.
The requirement of raw materials per month is 100nos. But the vendor cannot supply them in qty required by us but supply can happen in 1000nos. I cannot purchase all the quantities as materials cannot be kept in store for long period.
Which type of lot size is suitable for this type of scenario. Is there any SAP standards available or configuration is required?
Regards,
Pavan

Hi Pavan,
This is not a lot size issue , but a process issue. You cannot choose a lot size unless you are clear what is the qty for which you expect PR in this case?
Once that is clear, you will get lot size as needed
cheers
Rav

Similar Messages

I am unable to select the correct paper size when printing photo's in iPhoto 11. When I select the paper size in the custom window for 4x6 prints the prints only appear on an 8 1/2x11 page. My Mac is a year old iMac running 10.8.2.

I am unable to print 4x6 photo's using iPhoto 11. When I do they only print out on lettter size paper even though I enter 4x6 in the custom window in the print size menu. My older Snow Leopard system using iPhoto 9 the paper size window offered a 4x6 paper size which worked well.

Selecting paper size in the first sreen tellis iPhoto what papery you are going to use - it does not tell the printer what paper to use - printer specific options on on the last (second or third if you customize the print) screen where you tell the print any specifics like paper source (typically printers need to you tell them where a specific paper is loaded - they do not really know the sizes in each paper tray)
LN

Exporting images the correct mb size

Hi
I'm having trouble exporting files at the mb size I want. I go to edits and set everything on the maximum export size and quality, so in effect a 10mb file gets slimmed down to about half at 5mb and I canot figure why this happens!
I have shot in raw and I have some versions I need to export at the original or largets files size, aperture should do this surely?
Thanks

I normally edit jpegs just as they are, in versions, this should be fine I think?
Yes.
Also I find frustrating, when exporting, its always trial and error before I get the correct file size I want by adjusting the edits presets backwards and forwards, I suppose there is no default way of telling whcih size the file will be until this is dine I wonder? Its take a few goes before I know what size the file will be and then I can get on and export the whole project.
No, because for jpeg compression the file size depends heavily on the amount of detail in the image. The resulting file size is hard to predict.
If you have GraphicConverter, you could use it as an external Editor to export the images at a given File size. In GraphicConverter you can set the desired file size of the exported jpeg. I rarely use this, for me the image quality is usually more important than the file size.
Regards
Léonie

Is it possible to change the Costing Lot size for preference calculation?

Hi Gurus,
Is it possible to change the costing lot size for the preference calculation?
Reason for my question is: We have all prices on price unit 100
and we want to use also the price unit 100 for preference calcalation.
But the preference calculation always take price unit 1.
Is there any possibility to set somewhere the costing lot size for pref.calculation?
Thanks
Regards
Dieter

Does really nobody has a hint?

Data types used in a sub VI - selecting the correct input and output types?

data types used in a sub VI - selecting the correct input and output types?
I can never work out how to choose an input or output format for Subvi's.
I want to create a SubVI for the code in red. I needs an VI Server Reference compatible input and an output that goes to a waveform.
Thanks in advance.
Attachments:
data types.PNG ‏11 KB

GerdW,
I realise now I have taken us in the wrong direction. apologies for that.
History, this is not my code and I do not own the process and NOT my preferred method of using it. I was looking for a simple way to make subtle changes.
What we do - We use these programs to collect data from typically 6 pressures and 6 temperature probes and capture RS232 / USB VISA strings from sensors.
So every few weeks / months or up to a year we rearrange each sensor location to suit the new process. I did not write the code. I cannot change the procedure too much without resistance.
So headers in the CSV file have the DaqMX string passed through the code. Great.
Other data to the CSV file comes from calculations or extracted from the VISA string. Hence why we have headers with "Untitled 1 ()". These values also go to a History Chart.
So I was looking for a simple way to read the the local variable label as it is always linked to the front page indicator. People can cope with editing the indicator label, save the VI and hit run.
TL;DR - GerdW is now a psychologist.
Attachments:
data to csv and history chart.png ‏1043 KB

Selecting the correct membership type

Hello,
I am wondering if I selected the correct type of Creative Cloud membership a couple of months ago upon signup.
I am a photographer and use only Lightroom and Photoshop. Upon switching over to Creative Cloud, I selected the "Creative Cloud for Teams" but now I am thinking that this may not have been the best option. I work alone and only need the two apps.
Can I switch my membership to something that makes more sense for my business?
Thanks!

Cancel what you don't want and buy what you do want
Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Special Photography Plan (includes Photoshop & Lightroom & Bridge & Mobile Lightroom)
http://helpx.adobe.com/creative-cloud/faq/mobileapps.html
http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
Contact Adobe to find out how to do this without paying a penalty
Adobe contact information - http://helpx.adobe.com/contact.html

Selecting the correct iPhone model

How do I select the correct model (A1429 GSM) when I purchase it online on Apple Canada? I did not see any option till the payment page, so I did not finish the purchase.

Only the A1428 is sold in Canada.
<http://www.apple.com/iphone/LTE/>

It appears I downloaded CS6 suite windows to a mac. What do i do now? There was no place to select the correct version.

It appears I downloaded CS6 suite windows to a mac. What do i do now? There was no place to select the correct version.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How do I select the correct ram for upgrade to iMac 8,1?

How do I select the correct ram for upgrade on my iMac 8,1? When I look up information online, I believe that I have SO-DIMM ram. Do I need to purchase SO DiMM? I want to upgrade to Maverick and I think I was told that I need DDR2 or SDRAM. My model # is A1224, if that helps.

Welcome to Apple Support Communities
OS X Mavericks requires 2 GB of RAM at least, but I recommend at least 4 GB of RAM.
You have got an Early 2008 iMac. You can buy more RAM at OWC or Crucial. Your Mac supports 6 GB of RAM

Selecting the Correct Beginning Preferences for Video in PRE10

Hello,
I am an absolute beginner to PRE10, and am teaching myself from basic training videos at muvipix.com. It is obvious from the first video that selecting the right preferencs for the type of video is extremely important. I have videos from a vado, a flipcam, a droid global 2 and a droid global 3. I know that I can research the type and resolution of video that these cameras put out, but how do I use this information to figure out what to select from the menu that I saw in the video to start my project off with the correct settings?
Thanks, Chris

Being new to PrE, this ARTICLE will offer some learning resources, though at least one (a great one) has been mentioned.
Setting up you Project is very important, and is the first step in learning PrE. Steve Grisetti goes into a lot of necessary details on that, in his Basic Training Series. John T. offers some very useful links on first determining the CODEC inside your Source Files, and how those details will guide you. They might seem to be a "bit much," but trust me, they cover many bases, and necessary bases, and thing will become much easier. Editing Video is not as cut-and-dried, as editing Still Images. There are about 100x the number of variables, and those are important.
This is a necessary first step, and I cannot stress the importance of choosing the right Preset at New Project, as otherwise, there will be issues.
Good luck,
Hunt

How to select the correct formula ?

Hi all,
I intend to do one report which will allow user to select from parameter for one field, either is "QTY" or "AMOUNT/VALUE".
If the user select "QTY" then, the report will call the formula defined say cf_1q, if the user select "AMOUNT/VALUE" then it will call formula say cf_1v.
Btw, this two selection will display only one.
How should I do that ?
Rgds
Lim

There are several options:
- You could have only one format trigger that checks the user parameter and returns the correct value.
- You could have a third formula column that checks the user parameter and returns the appropriate formula column
- You could have two fields on top of each other and put a format trigger against each to show only the relevent one.
- You could have one field and a format trigger against that does an srw.set_field_number() call with the appropriate value.
- ...

Automatically selecting the correct network.

My wife has an G4 iBook. She has a wireless network at work and home. When she turns on her iBook at work, it automatically connects to that network.
At home, the iBook selects our neighbor's network. She has to manually select our home network. We want the iBook to select our home's network not the neighbor's.
What settings do I need to change so it will automatically select the home network not the neighbors, when at home and still automatically select the work network when at work?
Thank you
Power Mac G5 Mac OS X (10.4.7)

The laptop is running 10.3.9. I do not see a preferred network list. I can select the location Home and select by default join, Home in the menu. This works from home. But when she goes to work the laptop does not automatically join the work network so she has to manually select the work network.
Only one location works automatically, the other one must be selected manually.
Am I missing something?
Power Mac G5 Mac OS X (10.4.7)

Selecting the correct overdub?

Hi - probably a stupid question:
When I overdub a an actual audio part - say, a bass guitar - rather than rewriting the file, it apparently records another file, saving the original - which is great and non-destructive. But I'm having trouble figuring out which takes are which by looking at the region. Also, is there a way to toggle between takes in a given region? And when I edit a certain take, if there's already a part recorded before it, is there a way that it doesn't suddenly show up in place of the edited take?
Thanks. Sorry if this seems confusing. I guess I'm more used to GarageBand when it comes to overdubbing parts.

Hi B,
This could help to understand better the program.
Overdub on an adjacent track, and when you need to punch in,
it give you more time to get ready for the take.
Then give names to the takes.
Mute those you don't think are so hot. (select the zone press M key)
Drag the start and finish to edit the starting/ending points.
(REMEMBER - you don't need to fisical cut them if you drag and the wave's hidden you don't hear it - got it?)
Zoom and make sure the edits are at zero crossing, if you do this on the middle of the wave up or down you get a click.
In the end, you can drag the overdub track edits to the first bass track,
only to discover that you could do it all here in the first place! :o)
This way you may not affraid of make mistakes, and see how tracks behave.
cheers,
Jorge

How to select the correct size

I know how to export a project from imovie10 but I am not sure what size to select. I want to burn a DVD to playback on a 50inch plasma Panasonic HDTV, Can anyone help please?

Which formats are supported by your TV depend on the TV. I have a recent TV that plays the 1080p MP4 files created by iMovie without problem. My parents have a bit older TV that doesn't play the 1080p MP4 files, but it does play the 720p MP4 created by iMovie. So you might do a test using the 720p export in iMovie. Otherwise, you can look up in the manual of your TV what formats are supported by your TV and use MPEG Streamclip to convert the 1080p MP4 to one of the supported formats.

How can I find the correct file size of a layered Photoshop document?

I need to send layered PSD files by email (Mac's Mail), and I don't use services like Dropbox. My ISP allows a maximum file size of 5 MB. I reduce the file size by reducing it to 8 MB/channel, 150 ppi and reducing the maximum size dimension to 10 inches. I'm using CS6 on a Mac.
If I check the file size using Get Info, I get 9.4 MB.
If the file is nested in a folder, the size is likewise, 9.4MB.
If I attach the file to an email, I notice at the bottom left the file size is given as 12.0 MB.
If I send the PSD layered file to myself, I find it uploads and dowloads quickly. On the email itself, it says, "1 attachment, 923 MB".
On my Mac "MAIL" folder, it says the the file is 1.2 MB.
If I calculate the file size mathematically, I get a size of approximately 4.3 MB. That is not counting the individual layers or the mask stored in Channels, for which I don't know the calculation.
This is a total of 6 measurements of the file size of my attachment, 5 of which differ.
Is one of these correct?

I'd say 9.4 mb is correct. Email attachments always put on a lot of weight, so 12 mb as an attachment is probably right too.
Why don't you use a free service like Filemail? It's very easy to use, and you dont't have to sign up to use it.

Selecting the correct lot size...

Similar Messages

Maybe you are looking for