Selecting the correct overdub?

Hi - probably a stupid question:
When I overdub a an actual audio part - say, a bass guitar - rather than rewriting the file, it apparently records another file, saving the original - which is great and non-destructive. But I'm having trouble figuring out which takes are which by looking at the region. Also, is there a way to toggle between takes in a given region? And when I edit a certain take, if there's already a part recorded before it, is there a way that it doesn't suddenly show up in place of the edited take?
Thanks. Sorry if this seems confusing. I guess I'm more used to GarageBand when it comes to overdubbing parts.

Hi B,
This could help to understand better the program.
Overdub on an adjacent track, and when you need to punch in,
it give you more time to get ready for the take.
Then give names to the takes.
Mute those you don't think are so hot. (select the zone press M key)
Drag the start and finish to edit the starting/ending points.
(REMEMBER - you don't need to fisical cut them if you drag and the wave's hidden you don't hear it - got it?)
Zoom and make sure the edits are at zero crossing, if you do this on the middle of the wave up or down you get a click.
In the end, you can drag the overdub track edits to the first bass track,
only to discover that you could do it all here in the first place! :o)
This way you may not affraid of make mistakes, and see how tracks behave.
cheers,
Jorge

Similar Messages

Data types used in a sub VI - selecting the correct input and output types?

data types used in a sub VI - selecting the correct input and output types?
I can never work out how to choose an input or output format for Subvi's.
I want to create a SubVI for the code in red. I needs an VI Server Reference compatible input and an output that goes to a waveform.
Thanks in advance.
Attachments:
data types.PNG ‏11 KB

GerdW,
I realise now I have taken us in the wrong direction. apologies for that.
History, this is not my code and I do not own the process and NOT my preferred method of using it. I was looking for a simple way to make subtle changes.
What we do - We use these programs to collect data from typically 6 pressures and 6 temperature probes and capture RS232 / USB VISA strings from sensors.
So every few weeks / months or up to a year we rearrange each sensor location to suit the new process. I did not write the code. I cannot change the procedure too much without resistance.
So headers in the CSV file have the DaqMX string passed through the code. Great.
Other data to the CSV file comes from calculations or extracted from the VISA string. Hence why we have headers with "Untitled 1 ()". These values also go to a History Chart.
So I was looking for a simple way to read the the local variable label as it is always linked to the front page indicator. People can cope with editing the indicator label, save the VI and hit run.
TL;DR - GerdW is now a psychologist.
Attachments:
data to csv and history chart.png ‏1043 KB

Selecting the correct membership type

Hello,
I am wondering if I selected the correct type of Creative Cloud membership a couple of months ago upon signup.
I am a photographer and use only Lightroom and Photoshop. Upon switching over to Creative Cloud, I selected the "Creative Cloud for Teams" but now I am thinking that this may not have been the best option. I work alone and only need the two apps.
Can I switch my membership to something that makes more sense for my business?
Thanks!

Cancel what you don't want and buy what you do want
Cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
Special Photography Plan (includes Photoshop & Lightroom & Bridge & Mobile Lightroom)
http://helpx.adobe.com/creative-cloud/faq/mobileapps.html
http://helpx.adobe.com/photoshop/kb/differences-photoshop-creative-cloud-photography.html
Contact Adobe to find out how to do this without paying a penalty
Adobe contact information - http://helpx.adobe.com/contact.html

Selecting the correct iPhone model

How do I select the correct model (A1429 GSM) when I purchase it online on Apple Canada? I did not see any option till the payment page, so I did not finish the purchase.

Only the A1428 is sold in Canada.
<http://www.apple.com/iphone/LTE/>

Selecting the correct lot size...

Hi,
I have some problem in selecting the correct lot size, please help me solve it.
The requirement of raw materials per month is 100nos. But the vendor cannot supply them in qty required by us but supply can happen in 1000nos. I cannot purchase all the quantities as materials cannot be kept in store for long period.
Which type of lot size is suitable for this type of scenario. Is there any SAP standards available or configuration is required?
Regards,
Pavan

Hi Pavan,
This is not a lot size issue , but a process issue. You cannot choose a lot size unless you are clear what is the qty for which you expect PR in this case?
Once that is clear, you will get lot size as needed
cheers
Rav

It appears I downloaded CS6 suite windows to a mac. What do i do now? There was no place to select the correct version.

It appears I downloaded CS6 suite windows to a mac. What do i do now? There was no place to select the correct version.

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How do I select the correct ram for upgrade to iMac 8,1?

How do I select the correct ram for upgrade on my iMac 8,1? When I look up information online, I believe that I have SO-DIMM ram. Do I need to purchase SO DiMM? I want to upgrade to Maverick and I think I was told that I need DDR2 or SDRAM. My model # is A1224, if that helps.

Welcome to Apple Support Communities
OS X Mavericks requires 2 GB of RAM at least, but I recommend at least 4 GB of RAM.
You have got an Early 2008 iMac. You can buy more RAM at OWC or Crucial. Your Mac supports 6 GB of RAM

How to select the correct formula ?

Hi all,
I intend to do one report which will allow user to select from parameter for one field, either is "QTY" or "AMOUNT/VALUE".
If the user select "QTY" then, the report will call the formula defined say cf_1q, if the user select "AMOUNT/VALUE" then it will call formula say cf_1v.
Btw, this two selection will display only one.
How should I do that ?
Rgds
Lim

There are several options:
- You could have only one format trigger that checks the user parameter and returns the correct value.
- You could have a third formula column that checks the user parameter and returns the appropriate formula column
- You could have two fields on top of each other and put a format trigger against each to show only the relevent one.
- You could have one field and a format trigger against that does an srw.set_field_number() call with the appropriate value.
- ...

Selecting the Correct Beginning Preferences for Video in PRE10

Hello,
I am an absolute beginner to PRE10, and am teaching myself from basic training videos at muvipix.com. It is obvious from the first video that selecting the right preferencs for the type of video is extremely important. I have videos from a vado, a flipcam, a droid global 2 and a droid global 3. I know that I can research the type and resolution of video that these cameras put out, but how do I use this information to figure out what to select from the menu that I saw in the video to start my project off with the correct settings?
Thanks, Chris

Being new to PrE, this ARTICLE will offer some learning resources, though at least one (a great one) has been mentioned.
Setting up you Project is very important, and is the first step in learning PrE. Steve Grisetti goes into a lot of necessary details on that, in his Basic Training Series. John T. offers some very useful links on first determining the CODEC inside your Source Files, and how those details will guide you. They might seem to be a "bit much," but trust me, they cover many bases, and necessary bases, and thing will become much easier. Editing Video is not as cut-and-dried, as editing Still Images. There are about 100x the number of variables, and those are important.
This is a necessary first step, and I cannot stress the importance of choosing the right Preset at New Project, as otherwise, there will be issues.
Good luck,
Hunt

Automatically selecting the correct network.

My wife has an G4 iBook. She has a wireless network at work and home. When she turns on her iBook at work, it automatically connects to that network.
At home, the iBook selects our neighbor's network. She has to manually select our home network. We want the iBook to select our home's network not the neighbor's.
What settings do I need to change so it will automatically select the home network not the neighbors, when at home and still automatically select the work network when at work?
Thank you
Power Mac G5 Mac OS X (10.4.7)

The laptop is running 10.3.9. I do not see a preferred network list. I can select the location Home and select by default join, Home in the menu. This works from home. But when she goes to work the laptop does not automatically join the work network so she has to manually select the work network.
Only one location works automatically, the other one must be selected manually.
Am I missing something?
Power Mac G5 Mac OS X (10.4.7)

Selecting The Correct Fact Table

I have an environment that has multiple dimension tables and multiple fact tables.
I have multiple Presentation Catalogues to organise these.
In PCat1 I have multiple dimensions and two Facts; F1 & F2.
In answers I have build a filter to restrict the dashboard to show only selected data from two dimensions; D1 & D2. The filter is built using PCat1.
The facts F1 and F2 do both have relationships defined to D1 and D2.
When I check the SQL generated by the filter (as the results do not look correct) I can see that the SQL is referencing a fact table F3 that is NOT in PCat1.
F3 does contain valid joins to D1 and D2 but F3 is not in PCat1 so I do not know why it is being used.
How do I FORCE BIEE to generate SQL that is sourced ONLY from the presentation catalogue that was selected when I created the filter in answers.
I am using version 10.1.3.3

Excellent, that seems to have done the trick.
Right click on the presentation catalogue select properties and selected my fact table.
Need to test ALL my reports now.
Thanks for your help<br>
Ross

Having a problem with noises and mouse jumping, tried to reinstall and computer will not allow me to select the correct install icon. Sends me to xcode install

my kids computer began acting up this spring...so I shut it down.
Would not stay turned off, various noises almost continually, jumping highlights, etc.
Decided to reinstall os x snow leopard. insert disc and icon appears. then 3 icons with x in a column.
automatically highlights middle icon and will not allow me to select one above. Says install xcode.
not what i want to do.
any help?

What model iMac do you have?
What version of Mac OS is it running? If you don't know, try to give approximations on when it was set up and whether it was ever updated so we can take our best guess.
How are you trying to boot from the install disc? Your description of 3 icons with x in a column' leads me to believe that you aren't booting from the install disc, but rather you are inserting the disc after booting from the OS that is installed on the hard drive. If that is what is happening you'll see something like this, although it will vary depending on the actual version of the Install Disc that you have and how you've chosen to view the files (icon, list, column, etc).
What happens if you restart the system with the Install Disc inserted, then quickly hold down the 'c' key so that the system attempts to boot from the Install Disc. Do you still experience the same issue?

I am unable to select the correct paper size when printing photo's in iPhoto 11. When I select the paper size in the custom window for 4x6 prints the prints only appear on an 8 1/2x11 page. My Mac is a year old iMac running 10.8.2.

I am unable to print 4x6 photo's using iPhoto 11. When I do they only print out on lettter size paper even though I enter 4x6 in the custom window in the print size menu. My older Snow Leopard system using iPhoto 9 the paper size window offered a 4x6 paper size which worked well.

Selecting paper size in the first sreen tellis iPhoto what papery you are going to use - it does not tell the printer what paper to use - printer specific options on on the last (second or third if you customize the print) screen where you tell the print any specifics like paper source (typically printers need to you tell them where a specific paper is loaded - they do not really know the sizes in each paper tray)
LN

How to select the correct routing for production order?

In table PLPO i have 4 different group numbers for a particular routing. I'm wondering how a production order, created in CO01, selects which one to use. Our base quantity is dz/hr. When I create an order for a particular material, it shows up as 290 as the base quantity. The group 1 is 400dz/hr, not 200. Why does the order choose this group number and not the group number 1.
   Here is a screen from PLPO table.
   Here is a screen showing the material master.
   This is an image of the order details within the created order.

PLPO contains operations
The planselection would be based on PLKO entries.
Please check online help to first get a better understanding on how routings are selected.
Routing Selection - Production Orders (PP-SFC) - SAP Library
Automatically Selecting a Routing - Production Orders (PP-SFC) - SAP Library
Definition of Base Quantity for Operation:
"Quantity of the material to be produced to which the standard values of the
operation refer"

How to select the correct size

I know how to export a project from imovie10 but I am not sure what size to select. I want to burn a DVD to playback on a 50inch plasma Panasonic HDTV, Can anyone help please?

Which formats are supported by your TV depend on the TV. I have a recent TV that plays the 1080p MP4 files created by iMovie without problem. My parents have a bit older TV that doesn't play the 1080p MP4 files, but it does play the 720p MP4 created by iMovie. So you might do a test using the 720p export in iMovie. Otherwise, you can look up in the manual of your TV what formats are supported by your TV and use MPEG Streamclip to convert the 1080p MP4 to one of the supported formats.

Selecting the correct overdub?

Similar Messages

Maybe you are looking for