Selecting the incorrect folder or file
Hi all.
I have a rather wierd problem which Adobe help desk cannot solve.
When working in Dreamweaver, whenever I select a folder (setting up a new site), it (Dreamweaver) always selects the folder one level down. It's hard to explain so I have taken screen-shots of what happens (below).
The other (similar) problem is, when I am editing a website and I want to "change" a picture or hyperlink, Dreamweaver will not select my first selection (whatever I click on first). I have to click on any other link/image first and then click on the one I want to use.
I am using a Acer Aspire 5740G laptop with Windows 7 Home Premium. Dreamweaver is part of Web Premium CS4.
This problem does not occur with CS5 trial version (too expensive for me to buy right now).
Any help will be greatly appriciated.
Both are well known bugs in CS4 on Windows 7, which are fixed in CS5.
Both require workarounds since Adobe, in their wisdom, did not issue any patches or updaters for CS4 despite being repeatedly informed of both issues.
When working in Dreamweaver, whenever I select a folder (setting up a new site), it (Dreamweaver) always selects the folder one level down.
This is mentioned in the FAQ on this forum.
http://forums.adobe.com/thread/478327
The workaround is as Murray describes.
The other (similar) problem is, when I am editing a website and I want to "change" a picture or hyperlink, Dreamweaver will not select my first selection (whatever I click on first). I have to click on any other link/image first and then click on the one I want to use.
As you have discovered, workarounds are your only option.
Another workaround, when you're browsing to the new image or link, is to go up a folder level first then immediately back down to the folder you want. This seems to wake up the "Browse for File" feature and it will then replace the image or link correctly.
Similar Messages
-
When splitting a document, in output options you can select the target folder to be "the same folder selected at start", but where is that folder? I assumed it would be the original location of the source file but in my test the split files are not there just the source file.
Have you checked My Documents? You might close Acrobat and reopen, then see what folder comes up when you select File>Open.
-
How do I set the default folder for file - open file... ?
When I save a file, photo, etc., the default folder for OPENING a file becomes the last folder I SAVED to - even after closing and reopening Firefox. Is there a way to maintain the same default folder for opening files?
Thanks.Originally posted by: kwarner.uneedspeed.net
Well... I found over 200 bugs none of which seemed to talk about setting
the default folder. I probably missed the relevant bug in the spew.
I ask a question here as a last resort -- after I've done what I think
is an appropriate search for answers.
But thanks for your help in any case.
Daniel Megert wrote:
> DemonDuck wrote:
>
>> When I need to open a file not in the workspace, I use File -> Open File.
>>
>> But the default folder it opens is in C:\Documents and
>> Setting\Administrator
>>
>> I would like File -> Open File to first open in someplace more
>> reasonable -- like the workspace.
>>
>> How do I set the default folder for File -> Open File ????
>
>
> Is your '?' key broken? Check bugzilla there's a feature request
> regarding your question.
>
> Dani -
How i can show the popup to select the path to download file
Hi Guru ,
How can I show a popup before download a file , where User can select the folder where user want to download the data .Hi..
Check the following code.
You can either use.. WS_FILENAME_GET or CL_GUI_FRONTEND_SERVICES...
* CALL FUNCTION 'WS_FILENAME_GET'
* EXPORTING
* def_filename = space
* def_path = p_fp_pre
* mask = c_mask
* mode = c_o
* title = text-165
* IMPORTING
* filename = p_fp_pre
* EXCEPTIONS
* inv_winsys = 1
* no_batch = 2
* selection_cancel = 3
* selection_error = 4
* OTHERS = 5.
* IF sy-subrc <> 0.
* MESSAGE s195 DISPLAY LIKE c_e WITH text-166.
* ENDIF.
data: l_filename type string,
l_path type string,
l_fullpath type string.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
EXPORTING
* WINDOW_TITLE = 'Hi'
DEFAULT_EXTENSION = c_ext
DEFAULT_FILE_NAME = c_filename
* FILE_FILTER =
INITIAL_DIRECTORY = c_directory
* WITH_ENCODING =
PROMPT_ON_OVERWRITE = c_x
CHANGING
filename = l_filename
path = l_path
fullpath = l_fullpath
* USER_ACTION =
* FILE_ENCODING =
* EXCEPTIONS
* CNTL_ERROR = 1
* ERROR_NO_GUI = 2
* NOT_SUPPORTED_BY_GUI = 3
* others = 4
Cheers.... -
I want to back up my iphoto library to my external drive, but can't find it it in my computer's tree. When I click pictures in the tree, it launches iphoto and there is no file name or icon to drag. What am I missing? I'm sure it is simple what ever it is. Help please?
now that you have found your iPhoto library you can drag it to the external drive to backup it up
If you launch iPhoto does it work properly?
However, when I tried to relocate it to the pictures folder, I get a message that I can't add the library because the folder is defective or damaged.
Exactly what are you doing? what is the exact error message?
And as to
Should I trash the pref file for pictures folder and try again?
I have no idea what you are speaking of - files and folers do not have Pref files - only applications have Pref files
LN -
Regarding opening the remote folder and files
hello,
I am developing a struts web application through which a user would be able to see the remote files and folders and view it upon selecting the particular file into the JSP.
I have created a onclick event in javascript which will present a user a pop up with the browse option using the <input type="file" name="myfile"> html tag. but when I click on the browse button it is showing me the local folders on my machine. Is there any way where I can pass the remote machine name and path of the folders in this tag so that when I click on the browse button it will show me remote machine folders and hence I can select the remote files. I am setting the remote machine name in property file.
ThanksYou can't. You need to present the folders and files and download links yourself with help of java.io.File in servlet and JSTL c:forEach in JSP and of course a bunch of HTML/CSS to present it nicely in sort of tree.
-
Keyboard shortcut for the Document Folder in file open/save dialog
Does anyone know if there exists a keyboard shortcut for Document Folder in the File Save/Open Dialog? <command><shift>O works in the Finder. I tried variations of that in the dialog and didn't find any. <command>D takes you to the desktop. I tried other variations surrounding that to get to the Document Folder and didn't find any.
Anyone? Bueller?There isn't.
(56302) -
Selecting the link in local files
Hi, I have cs5 and before had mx2004,
when I work I always used to click on the name of the page (the link) on the local file list,
then automatically it was higlighted and I just clicked on copy,
with cs5 when I click on the link its higlighted but leaves the extension out, that makes me
past the link without the extension, this is very irritating and I dont see the reason to do so.
Is there a way I can configure this?
Thanks in advanceI'm not sure I understand your question. To add a hyperlink to your web page:
1. Highlight some text or select an image on your page.
2. Click inside the Link Field on the HTML properties panel (Ctrl+F3).
3. Click on the folder (browse) icon next to the Link Field.
4. Select a file from your local site. Hit OK.
Does this help?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
How to find the Size of a Folder &also list the sub folder and files in it
In my program I want to know the size of a folder . The input given is the path of the folder and the ouptut should be the list of files and subfolders with their size. What is the function we have to use for this?
Thank youclass: file
method: listFiles() - list all files of the dir referenced by the file object
method: length() - give the size of the file referenced by the file object ; you have to call this method on all file of the dir to make the sum and have the dir size -
Batch convert Pages files to Doc and stay in the same folder?
Hi there,
I use iWork '09 on Mountain Lion. I recently switched to Microsoft Word and prefer it over Pages (personal preference). However, I have nearly 1000 files on my computer that are in Pages format. I have extensively searched this issue in the Apple Support Communities and it appears that there are scripts that DO EXIST that batch convert Pages files into Word files. However, it appears that many of these scripts were built for older versions of iWork and therefore I run into various errors. For example, I used the script available at http://pagesfaq.blogspot.com/2008/01/export-folder-to-word-rtf-pdf-txt-or.html and click run but nothing actually happens (the script runs for less than a second, then I can click run again). I was able to use one script successfully (pasted below), but the only reason I can't use it is because it saves ALL my converted documents in one folder on my desktop and I would like a script that can save them in the original file were the Pages document is located.
So, is there an iWork '09 compatible script that can convert my Pages documents to Word documents and save them in the same folder as the original? Oh, and for an added bonus, it'd be cool if the script also deleted my Pages version after it was done with the conversion
--[SCRIPT batch_exportPages2DOC] (* Enregistrer ce script en tant que script ou progiciel. Exécuter ce script ou déposer l'icône d'un dossier sur son icône. Il ouvre tout document Pages du dossier et l' enregistre en fichier DOC dans le dossier "was_Pages_now_DOC". Celui-ci peut être sur le bureau ou dans le dossier "~/Documents". Si le GUIscripting n'est pas activé le script demande votre mot de passe pour l'activer. Le script récupère le dossier d'exportation par défaut dans le fichier de préférences de Pages. Éviter de cliquer durant l'exécution du script sauf évidemment pour sélectionner le dossier source. ************* Save the script as script or application bundle. Run it or drag and drop a folder icon on its icon. It opens every Pages's documents stored in the folder and save it as DOC file in a folder named "was_Pages_now_DOC". This one may be on the desktop or in the "~/Documents" folder. according to the property storeOnDesktop. If GUIscripting is disabled the script ask for your password to enable it. The script extract the default export path from the Pages's preferences file. Don't click when the script is running. Except, of course, to select the source folder. ************* Yvan KOENIG (VALLAURIS, France) 2008/04/20 2009/06/17 adapté pour format .doc 2009/12/13 updated for MacOs 10.6… *) property theApp : "Pages" property theExt : "pages" property nomDuRapport : "report_Pages2DOC.txt" property nom_du_dossier : "was_Pages_now_DOC" property storeOnDesktop : true (* true = dest folder will be on Desktop false = dest folder will be in "~/Documents" *) property msg1 : "" -- globale property msg90 : "" -- globale property msg91 : "" -- globale -- property msg92 : "" -- globale property msg94 : "" -- globale property msg96 : "" -- globale property msg99 : "" -- globale property rapport : "" -- globale property dossierDeStockage : "" -- globale property dossierParDefaut : "" -- globale property localExport : "" -- globale property newExt : "" -- globale property newType : "" -- globale property isOs4 : missing value -- globale property isOs5 : missing value -- globale property theMenu : missing value -- globale property menuExport : missing value -- globale property types : {{"doc", "SLDocumentTypeMSWord", 2}, {"pdf", "SLDocumentTypePDF", 1}, {"txt", "SLDocumentTypePlainText", 4}, {"rtf", "SLDocumentTypeRichText", 3}, {"rtfd", "SLDocumentTypeRichTextBundle"}, 3} --===== (* our settings *) property typeNum : 1 (* 1 = WORD, 2 = PDF, 3 = Txt, 4 = rtf, 5 = rtfd *) property theButton : missing value (* 1 button PDF 2 button Word 3 button RTF 4 button Standard *) --===== on run (* lignes exécutées si on double clique sur l'icône du script application • lines executed if one double click the application script's icon *) tell application "System Events" to set dossier to choose folder (* dans un bloc System Events pour avoir un titre de dialogue "localisé" • in a System Events block to get a localized dialog title. *) my commun({dossier}) -- my commun({"Macintosh HD:Users:yvan_koenig:Desktop:for_see:" as alias}) end run --===== on open (sel) (* sel contient une liste d'alias des éléments qu'on a déposés sur l'icône du script (la sélection) • sel contains a list of aliases of the items dropped on the script's icon (the selection) *) my commun(sel) end open --===== on commun(elems) my nettoie() my prepareMessages() tell application "System Events" if not (UI elements enabled) then set (UI elements enabled) to true (* Active le GUI scripting • Enable GUI scripting *) set titres to title of processes end tell -- to System Events if theApp is not in titres then my activateTheApp() (* Active et ferme la fenêtre du document créé à l'ouverture • Activate and close the doc's window created at opening *) set {newExt, newType, theButton} to item typeNum of types (* item 1 = {"doc", "SLDocumentTypeMSWord",2} item 2 = {"pdf", "SLDocumentTypePDF",1} item 3 = {"txt", "SLDocumentTypePlainText",4} item 4 = {"rtf", "SLDocumentTypeRichText",3} item 5 = {"rtfd", "SLDocumentTypeRichTextBundle",3} *) set sysAtt to (system attribute "sys2") if 4 > sysAtt then if my parleAnglais() then error "This script requires MacOs X 10.4 or higher !" else error "Ce script requiert MacOs X 1.4 ou ultérieur !" end if else if 5 > sysAtt then set isOs4 to true set isOs5 to false if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 9 end if else if 6 > sysAtt then set isOs4 to false set isOs5 to true if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 8 (* was a wrong 9 *) end if else set isOs4 to false set isOs5 to false if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 8 (* was a wrong 9 *) end if end if my fermeFenetres() (* • Close existing windows *) my afficheLeMessage(msg1) (* Éviter de cliquer… • Don't click… *) tell application theApp to set localExport to localized string "Export" set dossierParDefaut to my getDefaultExport() as text set rapport to "" set dossierDeStockage to my creeDossierDeStockage(nom_du_dossier) (* Unicode text *) try repeat with elem in elems try my exploreTraite(elem as alias, "") end try end repeat if rapport = "" then set rapport to msg90 -- crée un fichier texte sur le Bureau set p2d to path to desktop set p2r to (p2d as Unicode text) & nomDuRapport tell application "System Events" if exists (file p2r) then delete (file p2r) make new file at end of p2d with properties {name:nomDuRapport} end tell set rapport to rapport as text write rapport to (p2r as alias) on error MsgErr number NroErr if NroErr is not -128 then beep 2 tell application (path to frontmost application as string) to ¬ display dialog "" & NroErr & " : " & MsgErr with icon 0 buttons {msg99} giving up after 20 end if -- NroErr is… return end try my nettoie() if my parleAnglais() then my afficheLeMessage("Export done.") else my afficheLeMessage("Traitement terminé.") end if end commun --===== on nettoie() (* pour ne pas stocker dans le fichier script • So it will not be stored in the script file *) set dossierDeStockage to "" set dossierParDefaut to "" set rapport to "" set localExport to "" set newExt to "" set newType to "" set isOs4 to missing value set isOs5 to missing value set theMenu to missing value set menuExport to missing value set theButton to missing value set msg1 to "" set msg90 to "" set msg91 to "" set msg92 to "" -- set msg94 to "" set msg96 to "" set msg99 to " " end nettoie --===== on afficheLeMessage(m) beep 1 tell application (path to frontmost application as string) activate if my parleAnglais() then display dialog m buttons {" OK "} default button 1 giving up after 10 else display dialog m buttons {" Vu "} default button 1 giving up after 10 end if end tell end afficheLeMessage --===== on creeDossierDeStockage(Nom) (* S'il n'existe pas, construit un dossier destination sur le bureau ou dans "~/Documents" • If does not exist, create a destination folder on the desktop or in "~/Documents" *) local dd, dds if storeOnDesktop is true then set dd to path to desktop as Unicode text else set dd to path to documents folder as Unicode text end if if Nom ends with ":" then set dds to dd & Nom else set dds to dd & Nom & ":" end if (* dossierDeStockage n'existe pas, on le crée • dossierDeStockage is not available, build it *) tell application "System Events" to if not (exists item dds) then make new folder at end of folder dd with properties {name:Nom} return dds as Unicode text end creeDossierDeStockage --===== on exploreTraite(elem, ptree) (* elem est un alias • elem is an alias *) local elem_, cl_, type_Id set elem_ to elem as Unicode text tell application "System Events" to tell disk item elem_ set cl_ to class if cl_ is folder then set type_Id to "" else set type_Id to type identifier end if end tell -- "System Events" set cl_ to cl_ as Unicode text if type_Id is in {"com.apple.iwork.pages.pages", "com.apple.iwork.pages.sffpages"} then (* C'est un fichier Pages. • It's a Pages document *) my TraiteUnDocument(elem_) else if cl_ is in {"file package", "«class cpkg»"} then set rapport to rapport & msg91 & elem_ & return (* "Package", Attention, un package EST un dossier "spécial". • Caution, a package IS a "special" folder. *) else if cl_ is in {"folder", "«class cfol»"} then my ExploreUnDossier(elem_, ptree) else set rapport to rapport & msg92 & elem_ & return (* "Pas un document Pages". • "Not a Pages's document" *) end if -- typeId_ is … end exploreTraite --===== on ExploreUnDossier(dossier, ptree) local nomElement, cheminElement, c repeat with nomElement in list folder dossier without invisibles set cheminElement to dossier & nomElement tell application "System Events" to set c to name of (dossier as alias) my exploreTraite(cheminElement as alias, ptree & c & ":") end repeat end ExploreUnDossier --===== on TraiteUnDocument(leCheminOriginal_UniText) my export2Doc(leCheminOriginal_UniText as alias, leCheminOriginal_UniText) end TraiteUnDocument --===== on export2Doc(p, leCheminOriginal_UniText) (* • here p is the path as alias *) local flag, nom_de_p, nouveauChemin, w, bof, x, p_xport try tell application theApp open p set flag to false repeat 300 times (* Attends que le fichier soit réellement ouvert. • Wait until the file is really open *) if my getNbWindows() > 0 then set flag to true exit repeat end if end repeat end tell -- to theApp if flag is false then error number 8888 (* Le fichier n'a pu être ouvert. • The file can't be open. *) on error MsgErr number NroErr if NroErr = 8888 then set rapport to rapport & msg94 & leCheminOriginal_UniText & return else set rapport to rapport & "### " & MsgErr & " ### " & errNbr & return end if return (* can't do the remaining tasks *) end try tell application "System Events" to tell file leCheminOriginal_UniText set nom_de_p to name end tell -- System Events if nom_de_p ends with theExt then set nom_de_p to text 1 thru -(2 + (length of theExt)) of nom_de_p set nouveauChemin to dossierParDefaut & nom_de_p & "." & newExt --log nouveauChemin tell application "System Events" to if exists (file nouveauChemin) then set name of file nouveauChemin to nom_de_p & my horoDateur(modification date of file nouveauChemin) & "." & newExt (* name stamped *) try set {w, bof} to my getFrontWindow() tell application "System Events" to tell application process theApp click menu item menuExport of menu 1 of menu bar item theMenu of menu bar 1 (* Exporter… *) repeat until exists sheet 1 of window w delay 0.1 end repeat tell sheet 1 of window w (* sheet containing the buttons PDF, Word, RTF, Standard *) -- get properties of UI elements of radio group 1 if isOs4 then click button theButton of radio group 1 else if isOs5 then click checkbox theButton of radio group 1 else click radio button theButton of radio group 1 (* I hope that they will no longer change it *) end if -- isOs4 is true (* if typeNum is 2 then delay 0.2 tell pop up button 1 click click menu item quality of menu 1 end tell delay 0.2 end if *) click button 1 (* Suivant… *) repeat until exists button localExport delay 0.1 end repeat click button localExport (* Exporter… *) end tell -- to sheet… repeat 20 times if exists sheet 1 of window w then click button 2 of sheet 1 of window w (* "Ne pas consulter " dans éventuel rapport d'anomalies • "Don't review" in sheet reporting possible export anomalies *) exit repeat end if delay 0.1 end repeat end tell -- to process … System Events if dossierDeStockage is not dossierParDefaut then (* we must move the file from folder dossierParDefaut to folder dossierDeStockage *) set p_xport to dossierDeStockage & nom_de_p & "." & newExt tell application "System Events" to if exists (file p_xport) then set name of file p_xport to nom_de_p & my horoDateur(modification date of file p_xport) & "." & newExt tell application "Finder" to duplicate file nouveauChemin to folder dossierDeStockage (* • before 10.5, System Events is unable to move *) my wait4File(p_xport) tell application "System Events" to if exists file nouveauChemin then delete file nouveauChemin end if -- dossierDeStockage is not… my ferme1fenetre() on error errMsg number errNbr set rapport to rapport & msg96 & p & return & errMsg & " ### " & errNbr & return end try end export2Doc (* ===== • Build a stamp from the modification date_time *) on horoDateur(dt) local annee, mois, jour, lHeure, lesSecondes, lesMinutes set annee to year of dt set mois to month of dt as number (* existe depuis 10.4 *) set jour to day of dt set lHeure to time of dt set lesSecondes to (lHeure mod 60) set lHeure to round (lHeure div 60) set lesMinutes to (lHeure mod 60) set lHeure to round (lHeure div 60) return "_" & annee & text -2 thru -1 of ("00" & mois) & text -2 thru -1 of ("00" & jour) & "-" & text -2 thru -1 of ("00" & lHeure) & text -2 thru -1 of ("00" & lesMinutes) & text -2 thru -1 of ("00" & lesSecondes) (* • Here, the stamp is "_YYYYMMDD-hhmmss" *) end horoDateur (* ===== • Take care, the front window may be an Inspector or a dialog one. *) on getFrontWindow() local namesOfWindows, w, flag tell application theApp to activate set flag to false tell application "System Events" to tell application process theApp set namesOfWindows to name of every window repeat with w in namesOfWindows if subrole of (get properties of window w) is "AXStandardWindow" then set flag to true exit repeat end if end repeat end tell return {w, flag} (* • w is the name of the front document's window *) end getFrontWindow (* ===== • Wait that the file is completely written on disk *) on wait4File(p) (* • p must be Unicode text *) local oldSize, nnn, newSize set oldSize to 0 tell application "System Events" to set nnn to name of file p repeat try tell application "System Events" to set newSize to physical size of file p if oldSize < newSize then set oldSize to newSize else exit repeat end if end try end repeat end wait4File --===== on activateTheApp() local bof, status tell application theApp to activate if my getStartingStatus() is false then tell application "System Events" to tell application process theApp to keystroke return repeat set {bof, status} to my getFrontWindow() if status is true then exit repeat end repeat end activateTheApp (* ===== • Close existing open windows *) on fermeFenetres() repeat while my getNbWindows() > 0 my ferme1fenetre() end repeat (* • Now there is no open window *) end fermeFenetres --===== on ferme1fenetre() tell application theApp to activate tell application "System Events" to tell application process theApp to keystroke "w" using {command down} end ferme1fenetre --===== on getPlistValue(valName, default) local thePlist, u set thePlist to (path to preferences folder as Unicode text) & "com.apple.iWork." & theApp & ".plist" tell application "System Events" if exists file thePlist then tell contents of property list file thePlist try set u to (value of property list item valName) (* Unicode Text *) on error (* On est là si Pages n'a rien enregistré avec des préférences neuves • Here if Pages never saved with the new preferences file. *) set u to default end try end tell -- to contents of… else (* On est là s'il n'y a pas de fichier de préférences • Here if there is no preferences file. *) set u to default end if end tell -- to system events return u end getPlistValue --===== on getStartingStatus() return my getPlistValue("LSDefaultsUseDefaultStartingPoint", false) end getStartingStatus --===== on getDefaultExport() local u (* son of a *****, I forgot that they don't use the same name !! *) if theApp contains "Pages" then set u to my getPlistValue("SLDocumentDefaultExportDirectory", "~/Documents") else if theApp contains "Numbers" then set u to my getPlistValue("LSDocumentDefaultExportDirectory", "~/Documents") else error "I didn't coded a Keynote version !" end if set u to (POSIX file (do shell script "echo " & u)) as text if u ends with ":" then return u else return (u & ":") end if end getDefaultExport --===== on getNbWindows() tell application "System Events" to tell application process theApp to return count of windows end getNbWindows --===== on getLocale(a, x) tell application a to return localized string x end getLocale --===== on getVersion() try tell application theApp to return version on error return "1" end try end getVersion --===== on parleAnglais() local z try tell application theApp to set z to localized string "Cancel" on error set z to "Cancel" end try return (z is not "Annuler") end parleAnglais --===== on prepareMessages() if my parleAnglais() then set msg1 to "Don’t click when the script is running." & return & "Except, of course, if it ask for." set msg90 to "No problem during the export process." set msg91 to "Package" set msg92 to "Not a " & theApp & "’s document" -- set msg94 to theApp & " can’t read it" set msg96 to "Not copied." set msg99 to "Oops" else set msg1 to "Éviter de cliquer durant l’exécution du script" & return & "sauf s’il le demande." set msg90 to "Exportation réussie sans incident." set msg91 to "Package" set msg92 to "Pas un document " & theApp -- set msg94 to theApp & " n’a pas pu le lire" set msg96 to "Pas copié." set msg99 to " Vu " end if set msg91 to "### " & msg91 & " ### " set msg92 to "### " & msg92 & " ### " -- set msg94 to "### " & msg94 & " ### " set msg96 to "### " & msg96 & " ### " end prepareMessages --===== --[/SCRIPT]Try this app: http://tyorex.com/iWorkConverter
Batch convert Pages files to doc and pdf. -
Selecting particular folder using file tag browsing button in jsp
Hi,
I want to select a particular folder using file browsing option in html. why i want this is : i have to update the resumes located in a particular folder. so every time i am opening that folder which is a subfolder.
ex: c:\dir1\dir2\dir3\Resumes
Eveevry time , i have to go to C -> dir1->dir2-->dir3 then Reusmes
what i need is when i click the browsing button, i want to get the Resumes folder directly. Is there any option to do that one by setting value to file tag.
thanks in advance
my mail id [email protected]how do you know the machine that the browser is on has that directory structure?
-
Hello,
I have a strange issue on my Windows 8.1 machine. The icon for for an executable file on the network shows blank, if I select the second icon from the library. (File->Properties->Change Icon and select the second icon - This file has two icons)
If I re-create the IconCache.db, then it is showing correctly. But I do not want to do this every time.
Regards
MattehwIt indicates your Icon Cache is corrupted and you need to rebuild it.
Open the command prompt window, type each of the following and after every command, hit the Enter button:
cd /d %userprofile%\AppData\Local
attrib –h IconCache.db
del IconCache.db
start explorer
S.Sengupta, Windows Entertainment and Connected Home MVP -
Help. I moved my iTunes account (set up on a computer running on a school network) to an external drive, because I was out of network drive space. I changed my iTunes shortcut to point to my external drive. I am upable to pull music from a CD and copy it to the iTunes folder on the external drive. But when I try to open iTunes or use a previosuly set up device I get the following error message... "The folder iTunes is on a locked disc or you do not have write permissions for this folder." I have gone in and unchecked the read only on the folder and given my self all rights in my iTunes properties. Still I can't get in, and iTunes will only open to the folder on the external, it won't even open the iTunes page so I can see what I have. Help I need to be able to access those old files.
davidfrombillings wrote:
I thought I could just drag and drop my iTunes library to an external hard drive.
it'll work ... if done properly ☞
copy the entire iTunes folder (not just the iTunes music or media folder) from <MacintoshHD>/users/<yourname>/music on your Mac to the external, then launch iTunes while holding the option (⌥) key, click on choose library when prompted, and select the iTunes folder on the external.
if I already have my iTunes going to the incorrect files how is it going to find the correct files again.
you could try if this script helps:
iTunes Track CPR v1.3
This script attempts to locate the files of so-called "dead tracks"--iTunes tracks designated with (!)--that you assume are not actually missing but are still located in the iTunes Music folder in their "iTunes File Order" (Music -> Artist -> Album -> file.xxx)."
Eric Ross wrote:
When you moved the file back did you go back into iTunes in your preferences and select the advance tab and then selected the location again or where your files are
the iTunes media folder location in preferences > advanced tells iTunes where to put new additions to your library, not where your content currently is. -
I've transferred my Itunes Media Library to a NAS drive, and pointed Itunes (using the advanced preferences tab) to the relevant folder on the NAS drive. I have done this to free up disk space on a computer I primarily use for work but which I use both at home and at work. The NAS drive is at home. (To clarify, I am not expecting Itunes to function at work, only at home when access to the NAS drive is available).
Under certain circumstances Itunes will start-up at work and when it does it will create the folder structure for the Itunes Media Library in the default location (on the local drive) instead of looking for the location I have specified (the NAS drive) which it should not be able to find when I am at work and telling me that it can't find it (which would be fine).
How do I stop Itunes from recreating the default folder structure and defaulting the file path to the standard media library location on my local drive? Every time this happens I have to re-point Itunes to the NAS drive location, which often requires me to reconsolicate libraries which is tedious and time consuming. It seems that in the process of one of these consolidations I have lost some of the media files. They are still in the library (ie. visible in the Itunes window) but Itunes can't find the media associated with that file - identifying them with an excamation mark "!".
Any help with this would be appreciated, as I have read several forums and threads, and despite trying several different approaches I have been unable to address the problem, which appears to be exacerbated by the laptop being remote from the NAS drive.angelofromnsw wrote:
Can I put the ".itl" and other database files on the NAS, and if so where would I put them? I'm thinking that if the library file is only available at home then the ITunes library won't get corrupted at work when it can't find the media, in the event that I accidentally start up itunes eg. while opening an attachment or disc that can be read by Itunes.
iTunes will start up and you will have an empty library.
Can I put the ".itl" and other database files on the NAS, and if so where would I put them?
Yes.
Quit iTunes.
Copy the /Music/iTunes/ folder on the NAS.
Move the /iTunes media/ folder currently on the NAS into the /iTunes/ folder you just copied to the NAS.
Hold Option, launch iTunes, select Choose library... and select the iTunes folder on the NAS.
You can delete /Music/iTunes/ folder on the internal drive.
If you launch iTunes while NOT comnnected to the NAS, iTunes will recreate the /Music/iTunes/ folder and you will have an empty library.
WHen you are again connected to the NAS, just do step 4 above.
Do you know what the advantages and disadvantages are of having the database files like the ".itl" files stored locally versus on the NAS?
Keeping everyhing together inside the iTunes folder makes it "cleaner" and simpler to manage everything. -
ITunes does not find the iTunes folder though it is there
Hi all,
I moved my Music folder on a separate HDD for space issues, and now my iTunes would not start saying that it cannot find the iTunes folder and it cannot create it.
I put the iTunes in several places, not just in My Music, so that it will find it, however it does not and refuses to start.
I am using Vista.
I tried deinstalling/reinstalling iTunes and it does the same thing.
I hate deinstalling it and going through the whole registry in order to delete all entries that contain "iTunes".
Thank youHold Shift then launch iTunes.
Select *Choose existing library* then select the _iTunes library.itl_ file in \My Music\iTunes\ folder you moved.
Maybe you are looking for
-
Change encrypted sparsebindle password
I have an encrypted sparsebundle. I need to change the passphrase. How can I do that?
-
Problems with the number three on the keypad
iphone 4: When I dial a phone number, all of the digits on the keypad work correctly. When prompted to enter an account number or PIN, or choose an option from a menu after I get connected to my party, the number three key often does not register.
-
Apache Tomcat 4.0 and MySQL 3.2.3, how to connect?
Hi, could anybody help me please? I have a problem in connecting between Apache Tomcat 4.0 and MySQL 3.2.3. How can I connect them? Do I need mm.mysql.Driver? I have download that one, but I don't know where I should put that .jar file? And before th
-
Thanks to the folks here I got the development issues fixed, now I have IE problems. please see the live site: http://www.hitecsolar.com The IE bugs I've noticed so far are: The flash animation on the "How it Works" page plays fine everywhere else,
-
C3-01 Touch and Type Keypad Lock/Unlock Issue,,
I just bought this C3-01 touch and type phone and it got big issue of locking/unlocking key pad.. phone gets locked and even if I click on keylock button and then click unlock (on touch screen) then it never gets unlocked.. (I checked guide it sa