Selecting the recording quality on the new

Ok, i think i have the new zen, but im not entirly sure....
This is what it says in the information...
Creative Zen
Version: .2.0e
Total Space Etc... 30646mb.
I have the 32GB version.
What i want to know is if there are any ways i can change the recording bitrate and maybe even the format!
I'm hoping to record as MP3 at about 92kbs, is this possible, and how to i get the player to do it's
If it cant be done normally, i would consider a firmware update, or even maybe a hack to do this, any ideas?

I'm uncertain I understand your question. The Zen player only supports direct recording when using the built-in voice recorder. I doubt you are referring to that. It doesn't support any other recording (e.g. recording from the radio).
The quality of everyting else you put on the Zen is controlled by the PC software used to rip tracks from CDs and/or transcode existing content (be it audio, video or a combination) to a format the Zen supports. Changes to the format and quality of that content would be handled via the options in the PC sotware. The Zen has little to nothing to do with it.

Similar Messages

TS4124 how can i manually add songs to itunes match ? I currently only have room for 1500 new songs but my library has 35000 songs. can i select the new music i want to add?

Can I manually add songs to icloud match? I currently have room for 1500 songs but my library has 35000 total songs. Can I manually select the new songs to be added?

What do you mean by:
roberthgh wrote:
I currently have room for 1500 songs
Where does this information come from?

I have new music I am adding to my itunes. My ipod has the existing music from my itunes. I want to delete the existing music from the ipod and only select the new music just imported into itunes be sync'd on to my ipod?

I have new music I am adding to my itunes. My ipod has the existing music from my itunes. I want to delete the existing music from the ipod and only select the new music just imported into itunes be sync'd on to my ipod?

Open itunes, connect ipod, select what you want to sync ( in the music tab) sync.

Can't select the new Azure sql service tiers when creating a new database or upgrading an existing one

Hi all,
I have set up the preview for the new Azure SQL tiers on both of the subscriptions we have for Azure. The one under my MSDN subscription to and a pay as you go subscription
The pay as you go subscription works fine but when I try to upgrade an existing Azure sql database or create a new one on my MSDN subscription it doesn't give me the option of the new tiers.
Using the new portal it says I need to sign up to the preview, but I already have and when I go to try to add a new subscription to the preview for Azure SQL it says all my active subscriptions are on the preview.
Any idea what the issue could be?
Cheers
Ash

Hi,
Apologies for the inconvenience.
I suggest you open a Billing Support Ticket. They will be able to check this for you.
http://azure.microsoft.com/en-us/support/options/
Regards,
Mekh.

Because I have taken over 9,999 pics, my phone is now duplicating image numbers. The problem is when I am importing with Image Capture, when I select images, the program is importing BOTH the old images of the same number as well as the new ones. Help?

Because I have taken over 9,999 images, my phone is now duplicating image numbers. The problem is that Image Capture now imports BOTH images when I select the new ones that share numbers with old ones. The images were completely mixed when they showed up in Image Capture - Old image 0001, new image 0001, old image 0002, new image 0002 and so forth. I clicked on "date," which then rearraged the images, and I selected only the new ones, but when they actually import to my computer BOTH old and new images are importing. Has anyone figured out how to solve this problem?

Well, obviously all I needed to do to solve the problem was to post about it. It has stopped, so all is well!

Calendar upgrade failure, how can I reset the new calendar

Upgrading to the new v4 calendar on MobileMe has been a complete failure. Currently have a ticket open with Apple support, the upgrade failed with a "catastrophic failure message", my data was not fully transferred, etc.
I need to reset the new calendar, clear it completely, then reimport data from my v3 calendar from a backup to see if it will work. Any clues? There appears to be zero data on this.
Apple you really dropped the ball on quality control on this....

Launch Photos again, but hold down the alt/options key ⌥ while double clicking the Photos icon to launch the app. This will bring up the library chooser panel. select the library that you want to migrate to Photos.
After Photos completed the conversion, open the Preferences and select the new library as the main system library on the General tab of the Preferences.
Then you can delete the other migrated Photos library.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Why did my upgrade to Maverick result in my not being able to access my Documents in the previous format? Why did I not have the option to change my 'filing' system to use the new 'Tags'? Had reinstall 10.8.5 to access my Documents

Why did Maverick not enable me to access my Documents in the previous format (Grid) and when using the alternative I could not 'clik' to open them. The same applied when I tried to open documents from within my back up disc (LaCie). I had to reinstall 10.8.5 and back up from my LaCie (thankfully) to gain access to all my critical Documents? To deal with this I spent 3 and hlafg hours on telephone to Apple Support ( very helpful - but unable to resolve issues - then 3 hours in Apple Store (again very helpful but only able to assist by clearinng Maverick from my HD and reinstalling 10.8.5. Fortunately LaCie came to the resuce and I was able to back up Mac HD with all my documents but lost about one week of work....!!
Why did I not have the option when upgrading to Maverick to select the new 'Tag" system which I did not want?

10.8.5 is the lates ML edition. I use TM and also carbon copy cloner as my second backup. If I were you and you have a TM backup prior to Mavericks I would try another restore at bootup. You should erase your drive first in that process using disk utitlites and then use TM to put back you apps and files. The other choice is to do an internet recovery and then use TM to restore your apps and files. That should fix the permissions issue. I did the same thing and all was OK including getting my original iPhoto progam (9.4.3), iphoto11 and photos back.

I updated to the new iWork Keynote... Animation/transition "Perspective" is no longer available... I wonder why?

Any reason why Apple deleted "Perspective" in their transition/animation... that was my favorite of them all.

The transitions are still there; they're just not enabled.
Since the removal of the option to restore old transitions in the Keynote menu, they remain inaccessible.
To prove they're still there - select the new Keynote app, right click, then select 'Show package contents'.
Navigate to 'Contents' -> 'Resources'; all the old Transitions are there under 'KNTransition' including my old favourite 'Color Planes' that has now disappeared too.
Someone just need to work out how to reactivate them...
Or Apple just needs to turn them on again.

How should I best import HD Videos from the new iPad to my mac without loosing video quality?

The new HD video on the new iPad is awesome, but it can eat up a lot of memory in no time. I would like to know what is the most recommended way to export my ipad movies to iLife on my mac without loosing image quality, so i can free up space on my iPad.
If I use iPhoto I notice that the file size of the video from the new iPad is a lot smaller then if I use iMovie to import the same video.
Example: I import a 53 second video from the new iPad to iPhoto and the imported file has a file size of 143 MB in iPhoto. (iphoto save the video as IMG_0048.mov)
I import the same video to iMovie manually and the imported file size is 843 MB in iMovie. BIG DIFFERENCE. (iMovie saves that same video as clip-2012-03-20 16;13;08.mov)
Now to really be confusing: I go to Image Capture program and locate the file manually on my iPad and is has the same name and file size is what is in iPhoto.
So either iMovie is making the File a lot larger when it imports to an event, or the file I'm looking at is actually the iPhoto version that I get because I sync with iPhoto.
The second issue that I have is that now I have 2 videos on my hard drive: one in iPhoto, and one in iMovie for a combined data storage of close to 1 GB.
I would like to be able to import ALL my iPad recording into iPhoto and then delete the video from the device when done.
But if I loose video quality, I'm not happy about that. Secondly, by importing video from my iPad into multiple iLife programs, I'm creating duplicates with sometimes different quality. Any suggestions? is there a setting in iPhoto that can do all this for me?
Robert

Don't use iphoto to deal with movies. it's not really meant for that. use Quicktime or iMovie to work with your videos

After upgrading the new operating system, it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select

After upgrading the new operating system on my Droid Razr M it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select multiple message you have to delete them individually or the entire thread. Is there a way to get these back?

Well, that's kind of embarrassing. And I honestly thought I paid attention to that... It works perfectly now, thank you so much!
As expected, cdm-git also works fine since DMs only work in the root mode as of now.
Just for the record, both type commands output "/usr/bin/startx" and pacman -Q gives "systemd 215-4".
Last edited by looki (2014-08-23 13:04:49)

How do i record video on the new iMovie on my mac

how do i record video on the new iMovie on my mac

Hey baseballgod44,
Great question! The following article outlines how to record video with the FaceTime HD Camera in iMovie (2013):
iMovie (2013): Record video with the FaceTime HD camera
http://support.apple.com/kb/PH14675
Record live video directly into iMovie
1. Do one of the following:
          - To record using the built-in camera: Click the Import button in the toolbar.
          - To record using an external iSight camera: Connect the iSight camera to your computer with a FireWire cable, and click the Import button in the toolbar.
2. In the Cameras section of the Import window sidebar, select the camera you want to import from.
A live video image from the camera appears in the Import window.
3. Do one of the following:
          - To choose an existing event to contain the video: Choose the event from the “Import to” pop-up menu at the top of the Import window.
          - To create a new event to contain the video: Choose New Event from the “Import to” pop-up menu, type a name for the new event, and press Return.
Thanks,
Matt M.

How to write the new records not with existing records.

hi,
I have a script.If i execute the script it writes the records.but its writing with the exisiting records.It writes not only the new records but also the old records.
for eg: the exisiting records are:
1111115-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111116-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111117-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111118-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111119-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
but now what happend is the new records such as
1111116-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111117-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111118-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111119-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
it gets appended with the old existing records,
1111117-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111118-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111119-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111113-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111114-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111115-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111116-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111117-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111118-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111119-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
there will be some problem happens when we are going to upload a bulk data of say 25000 records.if its gonna update 20000 records,rest 5000 records i have to do it in next step,if this is going to happen then the first 20000 records will be displayed forever.because it have the capacity to write 20000 records.thenext 500 records will not be written.so there is a chance of redundancy.how to avoid this redundancy while running this script
my script is
create or replace procedure input_tables(table1 in varchar2)
is
str varchar2(32767);
cnt number(2);
cursor c1(tname in varchar2)
is
select column_name
from all_tab_columns
where table_name = tname
order by column_id;
rec c1%rowtype;
begin
cnt:= 1;
str:= 'declare '||
'cursor c2 '||
'is '||
'select ';
open c1(table1);
loop
fetch c1 into rec;
exit when c1%notfound;
if cnt = 1 then -- Added New
str:= str||rec.column_name; -- Added New
cnt:= cnt + 1; -- Added New
else -- Added New
str:= str||'||'',''||'||rec.column_name; -- Added New
end if; -- Added New
end loop;
close c1;
str:= str||' SRC from '||table1||';'||
' r2 c2%rowtype;'||
' ft UTL_FILE.file_type;'||
' str2 varchar2(200);'|| --Added New
' begin '||
' ft := UTL_FILE.fopen(''SAMPLE'',''OUTPUT.csv'',''w'');'||
' for r2 in c2'||
' loop '||
' UTL_FILE.put_line(ft,r2.SRC);'||
' end loop;'||
' UTL_FILE.fclose(ft);'||
' end;';
execute immediate(str);
end;
thanks,
Ratheesh.

Hi!
U can check the following script --
create or replace procedure input_tables(table1 in varchar2,start_col in number,last_col in number)
is
     str varchar2(32767);
     cnt number(2);
     cursor c1(tname in varchar2)
     is
       select column_name
       from all_tab_columns
       where table_name = tname
       order by column_id;
     rec c1%rowtype;
begin
     cnt:= 1;
     str:= 'declare '||
     'cursor c2 '||
     'is '||
     'select ';
     open c1(table1);
     loop
          fetch c1 into rec;
          exit when c1%notfound;
               if cnt = 1 then -- Added New
                    str:= str||rec.column_name; -- Added New
                    cnt:= cnt + 1; -- Added New
               else -- Added New
                    str:= str||'||'',''||'||rec.column_name; -- Added New
               end if; -- Added New
     end loop;
     close c1;
     str:= str||' SRC from '||table1||
     ' where rownum between '||start_col||' and '||last_col||';'|| -- Added New
     ' r2 c2%rowtype;'||
     ' ft UTL_FILE.file_type;'||
     ' str2 varchar2(200);'|| --Added New
     ' begin '||
     ' ft := UTL_FILE.fopen(''SAMPLE'',''OUTPUT.csv'',''w'');'||
     ' for r2 in c2'||
     ' loop '||
     ' UTL_FILE.put_line(ft,r2.SRC);'||
     ' end loop;'||
     ' UTL_FILE.fclose(ft);'||
     ' end;';
     execute immediate(str);
end;
/ To print first ten rows --
exec input_tables('EMP',1,10); --first 10 rowsTo print next remain rows --
exec input_tables('EMP',11,15);N.B: No tested....
Regrads.
Satyaki De.

Recording audio from a tape deck on the new iMac - Audio Input?

Hi folks, I used to have the older 2008 iMac which had an audio IN socket and also the audio OUT, but the new iMac I bought at the start of this year only has the Headphones socket, which apparently is supposed to also act as the Audio In, However I've never been able to get it to work and noticed some people online suggesting a Griffin or a Berringher device at around £30?...
I'm wondering if anyone knows do the cheaper devices on ebay for around £5, such as the basic USB Audio devices with the Input mic and headphones out socket work with the new iMac or do I specifically have to get one of the more expensive devices?
I have the Roxio Video to USB device, which uses a special Roxio application to capture the video, so I'm wondering if these devices only capture to their own specific applications or will it allow me to record through the USB to say, Garageband or one of the Adobe applications?
I'd basically like to be able to hook my tape deck up with Analogue L&R and then hook the mini audio jack into the mac and record, that's what I used to do... and the sound quality was pretty good...
Any help on this would be cool, thanks!

Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

Best way to select a record to display in the report

Hi,
I am helping a customer get a report (V11) working in the Visual Studio 2008 viewer.
The report, where they have linked all the tables from the database, has a paramater called 'jobNo'.
The record select expert then uses the param to select the required job. ({uv_JobDetails.JobNumText} = {?JobNo})
My question is how do I from my ASP.net (VB.net code) set this parameter, and then refresh the report to show the correct data matching the parameter jobNo.
Thanks

Hi,
Try with this:
ReportDocument boreportdocument = new ReportDocument();
boreportdocument.Load(Server.MapPath("Decreteparam.rpt"));
string recordselection = "{Customer.Country} = " + "{?My Parameter}";
boreportdocument.RecordSelectionFormula = recordselection;
CrystalReportViewer1.ReportSource = boreportdocument;
or //Set parameter value like this
boreportdocument.SetParameterValue("My Parameter", "USA");
For Range Parameter:
boreportdocument.Load(Server.MapPath("RangeParam.rpt"));
CrystalReportViewer1.ReportSource = boreportdocument;
boparamfields = CrystalReportViewer1.ParameterFieldInfo;
//setting the start and end values
boparamField = boparamfields["SalesRange"];
boparamValues = boparamField.CurrentValues;
boparamrangevalue.EndValue = "300";
boparamrangevalue.LowerBoundType = RangeBoundType.BoundInclusive;
boparamrangevalue.StartValue = "27";
boparamrangevalue.UpperBoundType = RangeBoundType.BoundInclusive;
//Adding Range values to parameter field
boparamValues.Add(boparamrangevalue);
You can get sample codes from [here|https://boc.sdn.sap.com/codesamples]
Have a look to our [Dev Library|https://www.sdn.sap.com/irj/boc/sdklibrary ]
Regards,
Shweta

Selecting the recording quality on the new

Similar Messages

Maybe you are looking for