Selecting Wildcard ' *** ' as a value in Bex and Active Table for DSO

Good day
I have search SDN, but could not find a similar request/enquiry.
I am extracting master data for vehicle category and vehicle sub-category via DB Connect from an Oracle db. From a source in Germany, the vehicle subcat is filled with ' *** ' due to business reasons. This ' *** ' carries a value and BW should be able to display all the ' *** ' for a certain vehicle category in BEx and in the master data or active data in DSO when transaction data is loaded. The master data is loaded with the ' *** ', no problem there, but when you want to display only the subcategories = ' *** ' , then all the data for all the subcategories registered under the specific category will display:
Master Data
Vehicle Cat : Vehicle Subcat : Description
Z : *** : Freigtliner
Z : CAT : Caterpillar
Z : DD : Detroit Diesel
Thus Z and *** will display the data for Z ***, Z CAT and Z DD.
Is there a way I can change this and only display data for ***?
Your expert assistance will be appreciated.
Cj

Hi,
You mean to say is you need to display attributes of vehicle category?
If so.. then add vehicle category in rows and then right click->attributes->select the sub category. Right click on the vehicle category and then properties->choose for no display.
Accordingly you can choose whether to display or not to display in properties.
Execute and test the query for your results.
Hope this helps,
Regards,
anil

Similar Messages

Difference between Delta "Change Log" and "Active Table (Without Archive)"?

In BI7.0 environment, we perform our Delta loads (the DTP settings under the Extraction tab, there is a field called Extraction Mode and it's value is selected as "Delta") every day among all our DSOs.
There is a section called "Delta Init. Extraction From..." under the same tab in DTP, there are four radio buttons:
Active Table (With Archive)
Active Table (Without Archive)
Archive (Full Extraction Only)
Change Log
Then what is the difference between "Change Log" and "Active Table (Without Archive)" if both Extraction Mode is "Delta" for two Delta loads?
Thanks!

Hi ,
The new options SP16 has are:(Chk Note 1096771)
Active Table (with Archive)
The data is read from the active table and from the archive or from a near-line storage if one exists. You can choose this option even if there is no active data archiving process yet for the DataStore object.
Active Table (Without Archive)
The data is only read from the active table. If there is data in the archive or in a near-line storage at the time of extraction, this data is not extracted.
Archive (Only Full Extraction)
The data is only read from the archive or from a near-line storage. Data is not extracted from the active table.
Change Log
The data is read from the change log of the DataStore object.
Delta will always be picked from change log table.Only during intialization you can choose between getting data from change log or active table.If you are doing the load first time and are initializzing delta in subsequent data targets, then pulling data from active table will get lesse volume of data then it would have got from change log table....All subsequent deltas will be picked up from the change log. And when we need to reload data into the data target (which would be a full load) - we use active table.
From change log : you can take below ones as targets
1) Cube 2) DSO with Addition as the update for the Keyfigures
From Active table: you can take below ones as targets
1) Cube ,if and only if, the records are never changes in the source once after creation
2) DSO with Addition as the update for the Keyfigures ,if and only if, the records are never changes in the source once after creation
3) DSO with Overwrite as the update for the Keyfigures ( incase deletions is not happening in the source system)
Pls check this link
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/e8c56ecd313c86e10000000a42189c/frameset.htm
Regards,
CSM Reddy

Third-Party Licensing and Activation Toolkit for Labview 8.5

There is any Third-Party Licensing and Activation Toolkit for Labview 8.5 as LV2010. PLS help..
Solved!
Go to Solution.

I know what you are asking and in the other thread, you were told it was for 2010 only. There is some support for 2009 but not for your old version. Go with the dongle suggested or upgrade your version of LabVIEW.

How to identify the source column and source table for a measure

Does anyone have a query that I can use to positively identify the source column and source table for a cube measure in an SSAS cube? Visual Studio shows ID, Name, and Source, but it is nearly worthless in a large cube and database.
Also - the same for a dimension would be great.
If no query exists for this, can someone please explain how to find the source column/table for a measure and for a dimension?
Thanks.

DMVs don’t expose the DataSourceView content. AMO is much better suited for object model operations like
this than the DMVs. PowerShell is also sometimes an option, but in this case C# code would be much easier because analyzing the contents of the DataSourceView is much easier using the .Net DataSet class.
Hope this helps.
Reeves
Denver, CO

Ratio between Fact table and Dimention table for a Infocube

Hi All,
How can we reduce the Ratio between Fact table and Dimention table for a Infocube below 20%.??
please give suggestions

Hi
Reduce Ratio??
The Ratios are dependent on the Fact Table, and the Dimension table that is modeled for your Cube.
You cannot change ratio individually, but can set the Line Item Dimension , provided you have only one char object is taking much space and bulky with much percentage, based on your requirement. You can always use fine tuning objects.
Please be more specific while posting, to get right help from sdn.
Hope it helps

Regarding the inbuilt log and audit tables for APEX 4.1

Hi,
When we acces the Administrator login then we can view various logs like the sql commands that have been recently fired,user list for a workspace,access to each application.Where are these data stored and fetched.Also could we get the inbuilt audit and log table for APEX 4.1 ?
Thanks and Regards

>
Please update your forum profile with a real handle instead of "935203".
When we acces the Administrator login then we can view various logs like the sql commands that have been recently fired,user list for a workspace,access to each application.Where are these data stored and fetched.Also could we get the inbuilt audit and log table for APEX 4.1 ? This information is available through APEX views. See:
<li>APEX views: Home > Application Builder > Application > Utilities > Application Express Views
<li>Monitoring Activity Within a Workspace
<li>Creating Custom Activity Reports Using APEX_ACTIVITY_LOG
Note that the underlying logs are purged on a regular basis, so for the long term you need to copy the data to your own tables, as Martin handily suggests here.

Relation between BKPF and EKBE table for reversing document?

Is there any relation between BKPF and EKBE table for reversing document when STBLG is blank in BKPF.
AND
How to differentiate Old Accounting document / Reverse document / New document when in BKPF-STBLG is blank for all three document and BKPF-XBLNR are same for all.

Hi Varun,
Table Document no (BKPF-BELNR) is link between Material document no (EKBE-BELNR). If you are looking for validating Material reversal document then please use following logic for your requirement.
Material Document (MBLNR) & Material Document Year (MJAHR). Pass material document (MBLNR) to MSEG-SMBLN to read MSEG-MBLNR with MSEG-MJAHR to MSEG-SJAHR, if record found delete both the documents i.e. MSEG-SMBLN & MSEG-MBLNR (donu2019t consider these documents in the logic) and display Material Document No. (MSEG-MBLNR)
Regards,
Santosh

Pass parameter values between BEX and exctractor

Hi All,
I create virtual cube which report from ECC
I create Extractor Transformation and DTP which load the data from ECC
In the BEX I create parameter (Week day) which can get few values (E.g. 1,3,5)
In the extractor I define field for week day and need to consider the week days parameter
My question is how I pass the value between the BEX and extractor?
Thanks in advance
Itzik

Hi Itzik,
One simple solution,
Create a new IOB with Texts. In the Variable exit, write the variable values to this text IOB using FM RSNDI_MD_TEXTS_UPDATE.
Read the values from the IOB text using routine while selection.
Sankar Kumar

Selecting rows with null values in an sql 3 table

Hi everyone I use oracle database 11g and have the following SQL statement:
SELECT Oprema.Opr_Id, Oprema.Datum_Nabavke, Oprema.Datum_Zaduzenja, Oprema.Dobavljac, Oprema.Jedinica_Mjere,
     coalesce ((Oprema.Zaduzio), 0), Oprema.Vrijednost, Oprema.Kolicina_Nabavna, Oprema.Kolicina_Otpisana, Oprema.Kolicina_Trenutna, Oprema.Status, Oprema.Konto,
     Oprema.KontoIsp, Oprema.Broj_Naloga, Oprema.Sifra_Objekta, Dobavljaci.Naziv AS DobNaz, coalesce(to_char(Uposlenici.Prezime), 'hm'), Objekti.Objekat_ID
FROM OPREMA Oprema, UPOSLENICI Uposlenici, DOBAVLJACI Dobavljaci, OBJEKTI Objekti
WHERE Oprema.Dobavljac=Dobavljaci.Dob_Id AND Oprema.Zaduzio=Uposlenici.UposlenikId AND Oprema.Sifra_Objekta=Objekti.Objekat_IDWhat I need is to show all the rows in the database. The problem is that some of the foreign keys Zaduzio and Objekti are NULL. This means the databse won't show those and only shows me rows where both have values. In all of these rows except for 3 only one of the two foreign keys has a value.
So what I need is an sql that would show me all 3. As you can see I tried with Coallesce but it didn't work, still only 3 rows show.
I also tried with UNION
SELECT Oprema.Opr_Id, Oprema.Datum_Nabavke, Oprema.Datum_Zaduzenja, Oprema.Dobavljac, Oprema.Jedinica_Mjere,
     Oprema.Zaduzio, Oprema.Vrijednost, Oprema.Kolicina_Nabavna, Oprema.Kolicina_Otpisana, Oprema.Kolicina_Trenutna, Oprema.Status, Oprema.Konto,
     Oprema.KontoIsp, Oprema.Broj_Naloga, Oprema.Sifra_Objekta, Dobavljaci.Naziv AS DobNaz, Uposlenici.Prezime, Objekti.Objekat_ID
FROM OPREMA Oprema, UPOSLENICI Uposlenici, DOBAVLJACI Dobavljaci, OBJEKTI Objekti
WHERE Oprema.Dobavljac=Dobavljaci.Dob_Id AND Oprema.Zaduzio=Uposlenici.UposlenikId AND Oprema.Sifra_Objekta=Objekti.Objekat_IDBut then the rows that have both Zaduzio and Objekti values are multiplied and selected twice.
So any ideas on how to do this?

Hi,
If those foreign keys are NULL, then an inner join won't produce any results. Maybe you need to make it an outer-join, like this:
SELECT Oprema.Opr_Id
,      Oprema.Datum_Nabavke
,      Oprema.Datum_Zaduzenja
,      Oprema.Dobavljac
,      Oprema.Jedinica_Mjere
,     COALESCE ( Oprema.Zaduzio
           , 0
           )          AS zaduzio_or_0
,      Oprema.Vrijednost
,      Oprema.Kolicina_Nabavna
,      Oprema.Kolicina_Otpisana
,      Oprema.Kolicina_Trenutna
,      Oprema.Status
,      Oprema.Konto,
     Oprema.KontoIsp
,      Oprema.Broj_Naloga
,      Oprema.Sifra_Objekta
,      Dobavljaci.Naziv     AS DobNaz
,      COALESCE ( TO_CHAR (Uposlenici.Prezime)
           , 'hm'
           )          AS prezime_or_hm
,      Objekti.Objekat_ID
FROM            OPREMA
JOIN            DOBAVLJACI ON   Oprema.Dobavljac      = Dobavljaci.Dob_Id
LEFT OUTER JOIN      UPOSLENICI ON       Oprema.Zaduzio     = Uposlenici.UposlenikId
LEFT OUTER JOIN OBJEKTI     ON       Oprema.Sifra_Objekta = Objekti.Objekat_ID
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Simplify the problem. For example, if you really need to display 18 columns, but 15 of them have nothing to do with the problem, then post a question that just includes e or 4 of those columns.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ {message:id=9360002}

How to lookup percentile table and Records table For Dashboard purpose?

Hi Folks,
I have Created one USP_Storedprocedure : whic is create table 1 results, I have another stored procedure
which has N no of columns. But For the dashboard purpose I want 2 columns only (whic are
table 2 sample Results, that table held N no of rows that will vary every month )
my Requirement is i wnat to look up boath tables using T-Sql or any other. I neeed to find % of each person value:
i am excepingting this code for second table person %
Select PersonID,((Value * 100)/(Select MAX(values)
From XX Table) From XX Table
?? how can I lookup boath tables can you please advise me thanks in advance

Hi Cherkuri
What I understand from your statement, you want to get the percentile no in table 1 for each record in table 2.
Below is my proposed solution and its output:
DECLARE @Table1 AS TABLE
PercentileNo INT,
Per1 INT,
Per2 INT
DECLARE @Table2 AS TABLE
Person_ID VARCHAR(50),
Value INT
INSERT INTO @Table1
SELECT 1, 1, 10
UNION SELECT 2, 11, 20
UNION SELECT 3, 21, 30
UNION SELECT 4, 31, 40
UNION SELECT 5, 41, 50
UNION SELECT 6, 51, 60
UNION SELECT 7, 61, 70
UNION SELECT 8, 71, 80
UNION SELECT 9, 81, 90
UNION SELECT 10, 91, 100
INSERT INTO @Table2
SELECT 'person1',12
UNION SELECT 'person1',11
UNION SELECT 'person2',5
UNION SELECT 'person3',18
UNION SELECT 'person3',16
SELECT * FROM @Table1 t
INNER JOIN @Table2 t2 ON 1=1
WHERE t2.Value BETWEEN t.Per1 AND t.Per2
Below is the output:

Optimization of Join statement between MKPF and MSEG table for improving pe

Hi All,
I had a issue where we are executing one custom report and it is getting timed out after 45 minutes. We further executed with trace on and got to the conclusion with the help of BASIS that about 42 minutes of the 45 minutes tracetime are spent by a join over the tables MKPF en MSEG.
This join is done by the abap statement:
SELECT mkpf~mblnr
         mkpf~mjahr
         mkpf~bldat
         mkpf~blart
         mseg~matnr
         mseg~werks
    INTO CORRESPONDING FIELDS OF TABLE i_matdoc_we
    FROM mkpf INNER JOIN mseg ON mkpfmblnr = msegmblnr
                             AND mkpfmjahr = msegmjahr
FOR ALL entries IN i_list
   WHERE mkpf~mblnr BETWEEN lv_interval-fromnumber
                        AND lv_interval-tonumber
     AND mkpf~blart = 'WE'
     AND mkpf~bldat LE gv_last_day_fisc_period
     AND mseg~matnr = i_list-matnr
     AND mseg~werks IN s_werks.
Here, I_LIST comprises of stock for specific period as entered in the selection screen for that particular Material and plant
LV_INTERVAL is range of all goods receipts for material and gv_last_day_fisc_period is current date.
During the tracetime this statement was executed more than 20.000 times, until the transaction timed out.
The individual executions of this select stmnt varied (roughly) between 50 and 1200 miliseconds. (depends wheter the requested database block is in the buffercache or must be read from disk).
The acesspath used to execute the query ( see below) is optimal, given the present indexes.
Index MSEG~M is covering al the specified selection criteria for MSEG.
Index MKPF-0 is used to search the specified MBLNR criterium in MKPF.
The remaining selection criteria MKPF-BLART and MKPF-BLDAT are not indexed, and imho this would also not make sense for this query.
BLART has only 3 different values n the MKPF table, and the selected value 'WE' has more than 1 million occurences.
BLDAT is selected with =<20110903, so this is not distinctive as well.
Can any one suggest some better way to write this query.
Regards,
Subhajit

Actually there are 2 select statements where JOIN have been introduced and especially the time out is occurring in the second JOIN.
Find all goods receipts for material
PERFORM get_number_range_matdoc USING '03'
                               CHANGING lv_interval.
SELECT mkpf~mblnr
         mkpf~mjahr
         mkpf~bldat
         mkpf~blart
         mseg~matnr
         mseg~werks
    INTO CORRESPONDING FIELDS OF TABLE i_matdoc_we
    FROM mkpf INNER JOIN mseg ON mkpfmblnr = msegmblnr
                             AND mkpfmjahr = msegmjahr
FOR ALL entries IN i_list
   WHERE mkpf~mblnr BETWEEN lv_interval-fromnumber
                        AND lv_interval-tonumber
     AND mkpf~blart = 'WE'
     AND mkpf~bldat LE gv_last_day_fisc_period
AND mseg~matnr = i_list-matnr
    AND mseg~werks IN s_werks.
CLEAR lv_interval.
PERFORM get_number_range_matdoc USING '02'
                               CHANGING lv_interval.
Find all goods issues for material
SELECT mkpf~mblnr
         mkpf~mjahr
         mkpf~bldat
         mkpf~blart
         mseg~matnr
         mseg~werks
    INTO CORRESPONDING FIELDS OF TABLE i_matdoc_wa
    FROM mkpf INNER JOIN mseg ON mkpfmblnr = msegmblnr
                             AND mkpfmjahr = msegmjahr
FOR ALL entries IN i_list
   WHERE mkpf~mblnr BETWEEN lv_interval-fromnumber
                        AND lv_interval-tonumber
     AND ( mkpfblart = 'WA' OR mkpfblart = 'WI' )
     AND mkpf~bldat LE gv_last_day_fisc_period
AND mseg~matnr = i_list-matnr
     AND mseg~bwart NE '561'
     AND mseg~bwart NE '562'
     AND mseg~bwart NE '961'
AND mseg~bwart NE '962'
AND mseg~werks IN s_werks.
Mainly the second JOIN is creating the problem... In the backend ORACLE is being used as database.
Please suggest how I can improve the performance of these joins as its taking more than 45 mins..

Problem when filling Node and Item tables for the metho add_nodes_and_items

Hi Experts,
I am facing problem when filling Node and Item internal tables for the method add_nodes_and_items.
as i have written the below logic:
LOOP AT gt_partner INTO wa_partner.
    CLEAR lvs_tc_root.
    l_key = l_key + 1.
    lvs_tc_root-node_key   = l_key. "wa_partner-sndprn.
* lvs_tc_root-relatkey = lvf_tc_node_key.
* lvs_tc_root-relatship = cl_gui_column_tree=>relat_last_child.
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-isfolder   = 'X'.
    lvs_tc_root-n_image    = icon_folder.
    lvs_tc_root-exp_image = icon_folder.
    lvs_tc_root-expander   = 'X'.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key   = 'A'. "Successfull
    lvs_tc_root-relatkey   = l_key.
    lvs_tc_root-relatship = cl_gui_column_tree=>relat_last_child.
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-n_image    = icon_green_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key   = 'B'. "Errors
    lvs_tc_root-relatkey   = l_key    .
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden     = ' '.
    lvs_tc_root-disabled   = ' '.
    lvs_tc_root-n_image    = icon_red_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
    CLEAR lvs_tc_root.
    lvs_tc_root-node_key = 'C'. "Deleted
    lvs_tc_root-relatkey = l_key .
    lvs_tc_root-last_hitem = wa_partner-sndprn.
    lvs_tc_root-hidden    = ' '.
    lvs_tc_root-disabled = ' '.
    lvs_tc_root-n_image   = icon_yellow_light.
    APPEND lvs_tc_root TO gvt_tc_node_table.
*   LOOP AT gt_partner_item INTO wa_partner_item WHERE sndprn = wa_partner-sndprn
    LOOP AT gt_partner INTO wa_partner_item WHERE sndprn = wa_partner-sndprn.
      CLEAR lvs_item.
      lvs_item-node_key   = l_key.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = wa_partner-sndprn.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'A'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Successful'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'B'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Errors'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
      lvs_item-node_key   = 'C'.
      lvs_item-item_name = 'Column1'.
      lvs_item-text       = 'Deleted'.
      lvs_item-class      = cl_gui_column_tree=>item_class_text.
      APPEND lvs_item TO gvt_tc_item_table. CLEAR lvs_item.
    ENDLOOP.
ENDLOOP.
CALL METHOD go_tree->add_nodes_and_items
    EXPORTING
      node_table                     = gvt_tc_node_table
      item_table                     = gvt_tc_item_table
      item_table_structure_name      = 'MTREEITM'
    EXCEPTIONS
      failed                         = 1
      cntl_system_error              = 3
      error_in_tables                = 4
      dp_error                       = 5
      table_structure_name_not_found = 6.
If the internal table has more than 1 record getting dump...Runtime Errors         MESSAGE_TYPE_X
Plase let me know how to overcome the problem..
Thanks,
Rajasekhar
Edited by: RajasekharReddy Nevali on Nov 29, 2010 3:43 PM
Edited by: Neil Gardiner on Nov 30, 2010 12:41 PM

Hi ,
U can undestand the code and one more thing dynamically display record for automcally here i am using root nodes please look at that one Same requiremtn i done previously.
cLEAR item.
item-node_key = c_nodekey-root.    "partner1
item-item_name = c_column-column1.
item-class = cl_gui_column_tree=>item_class_text.
item-alignment = cl_gui_column_tree=>align_at_top.
item-font = cl_gui_column_tree=>item_font_prop.
item-text = 'APPLICATION'.
item-length = 30.
APPEND item TO item_table.
DATA:lv_name TYPE tv_itmname VALUE '1',
       lv_nkey TYPE i,
       lv_nkey2 TYPE i,
       lv_nkey_c TYPE string,
       lv_nkey_c2 TYPE string,
       lv_nkey_c3 TYPE string,
       lv_nkey_c4 TYPE string,
       LV_NKEY_C5 TYPE STRING,
       lv_itmkey TYPE i,
       lv_itmkey_c TYPE string,
       LV_INDEX TYPE I.
************************************************LOOP FOR APPLICATION*********
LOOP AT i_otypes INTO wa_otypes.
    read table it_appl into wa_appl with key appl = wa_otypes-applic." BINARY SEARCH.
          if sy-subrc = 0.
            lv_apdes = wa_appl-text1.
          endif.
    CLEAR:item,lv_nkey_c.
    lv_nkey_c = sy-tabix.
    LV_INDEX = SY-TABIX.
    CONDENSE lv_nkey_c.
    CONCATENATE 'N' lv_nkey_c INTO lv_nkey_c.
    node-node_key = lv_nkey_c.
    node-relatkey = c_nodekey-root.
    node-relatship = cl_gui_list_tree=>relat_last_child.
    node-isfolder = 'X'.
    APPEND node TO node_table.
    CLEAR item.
    item-node_key = lv_nkey_c.
    item-item_name = c_column-column1.
    item-class = cl_gui_column_tree=>item_class_text.
    item-font = cl_gui_column_tree=>item_font_prop.
    item-text = wa_otypes-APPLIC.
    item-length = 30.
    APPEND item TO item_table.
     CLEAR item.
      item-node_key = lv_nkey_c.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_apdes.
      item-length = 30.
      APPEND item TO item_table.
     v_acount = v_acount + 1.
     v_acount1 = v_acount1 + 1.
clear lv_apdes.
*****************************************LOOP FOR ARCHIV OBJECTS***************************
    loop at it_obj into wa_obj where applic = wa_otypes-applic.
      CLEAR:item,lv_nkey_c2.
      lv_nkey_c2 = SY-TABIX.
      CONDENSE lv_nkey_c2.
      CONCATENATE 'SN' lv_nkey_c2 INTO lv_nkey_c2.
      node-node_key = lv_nkey_c2.
      node-relatkey = lv_nkey_c.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c2.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_obj-object.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c2.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_obj-objtext.
      item-length = 30.
      APPEND item TO item_table.
****count all object for final displaying*******
     v_ocount1 = v_ocount1 + 1.
      LV_STR = LV_STR + 1.
     ENDLOOP.
*********************LOOP FOR ARCH OBJECT ALL PROGRAMS*******************************************
   LOOP AT IT_PRG INTO WA_PRG WHERE OBJECT = WA_OBJ-OBJECT.
****************1PRG**********************
IF wa_PRG-REORGA_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-reorga_prg BINARY SEARCH.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item,lv_nkey_c3.
      data : v_no type sy-tabix.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'WRIT'."wa_PRG-REORGA_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'WRITE PROGRAM'."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
       clear lv_text.
************************SSSN NODE***********************
        CLEAR:item,lv_nkey_c4.
      data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      CONDENSE lv_nkey_c4.
      CONCATENATE 'SSSN' lv_nkey_c4 INTO lv_nkey_c4.
      node-node_key = lv_nkey_c4.
      node-relatkey = lv_nkey_c3.
      node-relatship = cl_gui_list_tree=>relat_last_child.
     node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_PRG-REORGA_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
        clear lv_text.
*******COUNT TYPE WRITE PROGRAMS****************
      V_WCOUNT = V_WCOUNT + 1.
CLEAR item.
V_WCOUNT = V_WCOUNT.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column3.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = V_WCOUNT."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR V_WCOUNT.
ENDIF.
*endif.
*****************2PRG*****************
IF wa_PRG-RETRIE_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-retrie_prg.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item, NODE, lv_nkey_c3.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'successful'."wa_PRG-RETRIE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'sucessful PROGRAM'.
      item-length = 60.
      APPEND item TO item_table.
*********************************SSSN NODE*******************************
       CLEAR:item,lv_nkey_c4,node.
     data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      CONDENSE lv_nkey_c4.
      CONCATENATE 'SSSN' lv_nkey_c4 INTO lv_nkey_c4.
      node-node_key = lv_nkey_c4.
      node-relatkey = lv_nkey_c3.
      node-relatship = cl_gui_list_tree=>relat_last_child.
     node-isfolder = 'X'.
      NODE-N_image =' '.
      APPEND node TO node_table.
       CLEAR NODE.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = wa_PRG-RETRIE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c4.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
        clear lv_text.
**********COUNT THE RELOADPR*******************
          V_WCOUNT = V_WCOUNT + 1.
CLEAR item.
V_WCOUNT = V_WCOUNT.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column3.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = V_WCOUNT."lv_text."'WRITE PROGRAM'.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR V_WCOUNT.
ENDIF.
ENDIF.
****************3PRG**********************
IF wa_PRG-DELETE_PRG IS NOT INITIAL.
read table it_trdirt into wa_trdirt with key name = wa_prg-delete_prg.
              if sy-subrc = 0.
              lv_text = wa_trdirt-text.
              endif.
     CLEAR:item, NODE, lv_nkey_c3.
      v_no = v_no + 1.
      lv_nkey_c3 = v_no.
      CONDENSE lv_nkey_c3.
      CONCATENATE 'SSN' lv_nkey_c3 INTO lv_nkey_c3.
      node-node_key = lv_nkey_c3.
      node-relatkey = lv_nkey_c2.
      node-relatship = cl_gui_list_tree=>relat_last_child.
      node-isfolder = 'X'.
      APPEND node TO node_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column1.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'DELETE'."wa_PRG-DELETE_PRG.
      item-length = 30.
      APPEND item TO item_table.
      CLEAR item.
      item-node_key = lv_nkey_c3.
      item-item_name = c_column-column2.
      item-class = cl_gui_column_tree=>item_class_text.
      item-font = cl_gui_column_tree=>item_font_prop.
      item-text = 'NAME OF DELETE PROGRAM'.
      item-length = 60.
      APPEND item TO item_table.
       CLEAR:item,lv_nkey_c4,node.
     data : v_no1 type sy-tabix.
      v_no1 = v_no1 + 1.
      lv_nkey_c4 = v_no1.
      endloop.

Linkage for RSEG and BSIS tables for tax item

Hi,
How to find corresponding tax line item in BSIS or BSAS table for a RSEG line item.
In case of BSET table I could find the linkage by BSET-TXGRP and RSEG-BUZEI.

The obvious link I can see is on bukrs/belnr/buzei/mwskz fields.
All available in all tables. The company code and accounting document number is normally enough but if there are multiple line items use the buzei fields as well. The tax field on is MWSKZ.
Same on both BSIS/BSAS and RSEG.
BSAS is almost the same table as BSIS but has the clearing items as well.
Message was edited by: Barry Neaves

Business content referring RESB and MBEW tables for MM

Hi Gurus,
I have a requirement where i need to extract data from RESB and MBEW tables.
Is there any business content extractor which takes data from these tables. or the data can be compensated from other tables like EKBE,EKKO,EKPO or MSEG. please let know. Help or advice is greatly appreciated. Thanks in advance.
Regards,
Satish

You'll have to use 0CO_PC_ACT_05 (Material Valuation: Prices) for MBEW note that it doesn't support delta.
For RESB you might look at 0PS_COMPONT_ATTR, but I'm not really shure
Message was edited by:
Pabloj

ODI metadata query to find source and Target table for Interface

Hi Experts,
Client is migrating there source from EBS 11.5.10 to R12. They are in ODI BIApps. 7952 version.Since,all there mappings are customized they are not bothering about support from Oracle as far as BIApps is concerned.
Now,we need to know how many ODI mappings will be impacted when source EBS is migrating from 11.5.10 to R12 and so that we can only target those mappings accordingly.
So,please provide me with below inputs:
1) Any metadata query which will give me the source table and target table information's against an interface even-if the main interface source is another interface.
2) What are the other stuffs I need to look from point of view of mapping changes when the source is upgrading.e.g. only source table change is enough or I need to look into other stuffs.I feel,it is boiling down to create a separate source adapter for R12.
Regards,
Snehotosh

SELECT C.TABLE_NAME AS "Target Table Name",
     A.COL_NAME AS "Target Field Name",
     Wm_Concat(G.SOURCE_DT) AS "Target Data Type",
     Wm_Concat(G.LONGC) AS "Target Data Length",
     Wm_Concat(TXT) AS "Transformation Rule",
     Wm_Concat(DISTINCT F.TABLE_NAME) AS "Source Table Name",
     Wm_Concat(D.COL_NAME) AS "Source Field Name",
     Wm_Concat(D.SOURCE_DT) AS "Source Data Type",
     Wm_Concat(D.LONGC) AS "Source Data Length"
FROM
     SNP_POP_COL A JOIN SNP_TXT_CROSSR B ON A.I_TXT_MAP=B.I_TXT
     JOIN SNP_POP C ON A.I_POP=C.I_POP
     JOIN SNP_TXT E ON A.I_TXT_MAP=E.I_TXT AND B.I_TXT=E.I_TXT
     LEFT OUTER JOIN SNP_COL D ON B.I_COL=D.I_COL
     LEFT OUTER JOIN SNP_TABLE F ON F.I_TABLE= D.I_TABLE
     LEFT JOIN SNP_COL G ON A.I_COL=G.I_COL
WHERE POP_NAME = 'XXXXXXX'
GROUP BY C.TABLE_NAME,A.COL_NAME ORDER BY 1

Selecting Wildcard ' *** ' as a value in Bex and Active Table for DSO

Similar Messages

Maybe you are looking for