Selecting with colour range doesn't work properly

Well, at least to me it doesn't work properly. If I have elements on seperate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected. That's not what I want! I only want it to select the colour range on that one level. The work around is to manually turn off other levels, but on a file with lots of levels, that can be tedious. Can this be avoided? Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).

Aha! You are correct. Layers above the target layer are still being sampled when sampling is at "Current Layer".
That has to be a bug. The Eye Dropper Tool itself does work correctly, though.
I'm about to report another problem, so I'll report this one, too.
Edit: Looking again, I don't think there is a bug.
It seems to not be that the higher layer is seen when sampling "Current Layer", which is correct and the same as when the Eye Dropper Tool itself is use. However, the pixels of the visible composite are then evaluated to determine the regions to be selected. I guess that's correct behaviour and you will have to do the Alt-click on eye trick to completely ignore all other layers.

Similar Messages

Color Range doesn't work properly in CS3

Hi there,
I have a problem with CS3. Since a few weeks I can't use properly "Colour Range" feature.
Especially for bright colour the Colour Range doesn't select what I want to select. For example I want to select a bright cloud and can't select it with Colour Range. Of course I checked if there is any information or I have a burn area.
I use several different setting but I still have the problem.
I used 8/16 bit, Adobe RGB/sRGB
At Colour Range I use:
- Sampled colours
- Selection
- Fuzziness: how much I need it
- Selection preview: None
I need help...
Thanks

Possibly you are missing something in the way you apply this command. Here's how I use it to select patchy clouds with ragged edges and continuously varying shades of gray:
Select the eyedropper tool on the Toolbar and on the options bar set the sample size to 3x3.
Activate the Color Range command. Activate the "selection" radio button and choose "none" in the selection preview. In the "select" box, choose "sampled colors".
Set a trial fuzziness of,say,50. Click with the eyedropper on a point in the midst of the color you want to select. That's your "base" color.
Then switch to the "Color Added" (plus) eyedropper, holding the left mouse button down while dragging it over areas deviating from the base color but which you want included.
If there are non-contiguous areas with still different colors you also want to include, release the mouse and move the cursor to those areas before dragging again.
All the while, keep an eye on the dialog box display which shows what you've selected, albeit crudely. If you pick up unwanted colors, switch to the "subtract from sample" (minus) eyedropper and drag it over those areas.
When you think you've got it about right, experiment with the fuzziness slider to see if you can improve things by increasing or decreasing fuzziness.
Don't re-use the plain eyedropper unless you want to start all over again. Optionally, instead of switching among the 3 eyedroppers, you can activate only the plain eyedropper but use it with SHIFT to add or ALT to subtract.

Dynamic VLAN-Assignment from RADIUS with Aironet 1242AG doesn't work properly

Hello All,
our setting is to assign VLANs dynamically from RADIUS (freeradius) to Clients connected to the 1242 Access-Points with one SSID. We have Firmware
12.4(10b)JA/JDA on the Aironet 1242.
The clients should be connected to one of three VLANs - one for staff, one for students and one for guests. I use the Web-Interface of
the 1242, because I'm not very familiar with IOS cli.
After assigning the first VLAN to the SSID -> click Accept, assigning the second VLAN to the SSID (overwriting the previous one) -> click Accept,
assigning the third VLAN to SSID (overwriting again) -> click Accept, the assignment of VLANs works really fine,
(the only thing i change on the page is VLAN, the SSID is set to mandatory WPAv2)
BUT...
when the 1242 is rebooted (due a building power off or similar) it doesn't work anymore. Clients end up in an endless authentication loop.
After doing the procedure again from above - assigning all VLANs sequently once, it works fine again ! till next reboot...
All VLANs have same encryption, cypher, TKIP+AES CCM. On the Cisco-Site I found a command, which i also tried with no success:
'aaa authorization network default group radius'.
I also tried to save the working config and load it into the 1242 again, this also did not work.
It seems that i'm doing something wrong, but what ?
Thanks for some help,
Frank

All you really need to do is make sure the subinterfaces/vlans are created for each VLAN you need, then have radius push down IETF attributes 64, 65, and 81.

Firefox from version 3.6 to 11 beta doesn't work properly with gmail

Gmail doesn't work properly with any version of firefox from 3.6 to 11. I have tried several newer versions of firefox and they ALL DO NOT WORK PROPERLY with GMAIL!!!!!! THIS IS VERY FRUSTRATING & ANNOYING!! I can't click on any links or it just keeps saying LOADING when I try to delete a message or even go into the gmail settings.

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

Search in Outlook 2010 with Exchange Server 2010 doesn't work properly

Hi all,
I have a problem with a clients Exchange 2010. Search function in Outlook 2010 doesn't work properly, the employee can't search mails and contact - he doesn't get any result :-(
In application syslog/protocol I get this error:
Function 'CISearch::EcGetRowsetAndAccessor' found, content indexing for database 'Mailbox Database 0139257080' caused by MSSearch-Error '0x80041820' deactivated
Can anybody help me with this, if its necessary I can give further information :-)
Thomas
Thomas Deinert

Hi,
What’s Exchange Version? Sometimes, after Installing Exchange 2010 SP 1, Searching via OWA or Outlook Online Mode may Fail. If so, please try the following solution:
Download the script
Repair-ExchangeSearchSymlinks.ps1 from the Script Center.
Copy the Repair-ExchangeSearchSymlinks.ps1 script to the Scripts directory on the Mailbox server (default installation is C:\Program Files\Microsoft\Exchange Server\v14\Scripts).
On the afflicted Mailbox server, open the Exchange Management Shell by right-clicking the shortcut and selecting “Run as Administrator”.
Within the Exchange Management Shell, navigate to the Exchange Scripts directory.
Within the Exchange Management Shell, run the following script: .\Repair-ExchangeSearchSymlinks.ps1
Within the Exchange Management Shell, run the following script (without the symbols [] and substitute the database name(s) for any databases you wish to reset: .\ResetSearchIndex.ps1 [-force] <dbname> [<dbname>]...
You will receive an Event ID 109 when the rebuilding of the index starts for each database and an Event ID 110 for each database when the index rebuild has completed.
After receiving Event ID 110 for each database, test to make sure search functions correctly with both OWA and Outlook operating in Online Mode.
Similar thread:
https://social.technet.microsoft.com/Forums/exchange/en-US/35db030c-277f-49d6-83d6-772f839a47f8/owa-2010-sp1-search-problems?forum=exchange2010
Best Regards.

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

Safari doesn't work properly with Ebay

Safari doesn't work properly when listing items on Ebay. Fix it.

Hi Occo
I would rather Apple updates Safari
Then tell Apple, this a user to user forum, although I don't think Apple will update just for your problem as hardly anybody is experiencing the same issue, just a couple on this troubleshooting forum.
this IS NOT A EBAY PROBLEM
Please don't use all caps, it is considered shouting. No this may well not be an ebay problem, but it is not a Safari issue either, it is an issue on your Safari and on your computer. Everyone I know has no trouble with ebay at all. In fact Safari 4.0.4 has made it even faster to log in and browse, buy etc.
id rather apple fixed their software
Again, tell Apple, not us, through the Apple feedback page or file a bug report. They will update Safari if and when they decide, but it will not be to fix what is not broken.
Im sure there would be similiar sites that arent compatible with safari
I agree, as stated before that some sites are just lazy in updating their coding, usually not the high traffic sites though. Other sites only update their code for Windows IE and forget the rest of the world. Firefox, Opera, Camino etc. also can't access some sites.
So in conclusion, try Safari and OSX maintenance and if that fails, then try an archive and install. Because there is nothing wrong with Safari 4.0.4 and ebay, or else this forum would be inundated with thousands upon thousands of users complaining and that is not the case.
Cheers and Good Luck

I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

I am running Windows XP, SP3. I have tried to run Firefox 4 several times but it doesn't work properly. The main page comes up showing the logo, below that is the search box, and below that is another box with nothing in it.

The external DVD/CD Writer will Not appear on your desktop when you attach it to your iMac. It will appear in "Finder", which is in your Dock.
Hope this helps

Some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary and MplayerX and etc

I face to this problem since new OS, Yosemite has installed on my mac book
some of my application in macbook pro doesn't work properly with Os Yosemite, such as dictionary (mac dictionary) and MplayerX and etc
For example when I make MplayerX and such application fullscreen the screen become white and just voice of video can be heard or when I use Mac Dictionary (look-up dictionary) in any pages the meaning of work is not appear ( look at the picture above), so i need to directly open dictionary to find the meaning.
Please help me
tq

Same thing here with MPlayerX (annoying)

Trouble with the PS CC2014 3D Effects - Intel HD Graphics 3000 that doesn't work properly?

I Have a MBP 13 inch 2.8 GHz Intel Core i7 late 2011 and I'm Having trouble with the PS CC2014 3D Effects crashing when trying to apply a New 3D extrusion, are there any solution regarding the Intel HD Graphics 3000 that doesn't work properly?
Thanks!

Look at this document. It should help you troubleshoot and it suggests settings to try out.
Photoshop CC and CC 2014 GPU FAQ
While the stock advice for Windows users is to go to the Intel site for updates, Mac users can only get their drivers in the Mac OSX system updates. So you need to be sure your OS is up to date. If you have an earlier version, like 10.7 or 10.8, it is possible an upgrade to 10.9 might help.

Google News doesn't work properly with Safari 5.1.4

Has anyone else noticed that Google News doesn't work properly with Safari 5.1.4?

Thank you for your response. The more I use 5.1.4 the more problems I am seeing. There are problems with images and layout. I would like to back up to 5.1.3 but the system won't let me. At present I a looking for a solution, or I might just start using Firefox.

What can I do if my CD or DVD drive doesn't work properly in Windows 8?

QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
AnswerNote: For help with this issue in Windows 7, please see this article.
To get your CD or DVD drive working correctly, try these suggestions in the order listed.
Reinstall the Driver
Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
Power Cycle
Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
Ensure the laptop is turned off.
Unplug the laptop's AC power cable.
Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
Hold down the power button for thirty seconds.
Reattach the battery if removed.
Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
Connect the other end of the AC adaptor to your computer.
Start the computer and test the drive
Microsoft Fix-it
Your computer may exhibit one or more of the following symptoms:
Your CD or DVD drive no longer appears in Windows
Your CD or DVD drive does not read or write and is shown as disabled
The media in your CD or DVD drive cannot be read
The media cannot be written to a CD or DVD inserted into the drive
You receive an error message about your CD or DVD drive
If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
System Restore
Try using System Restore to restore to the most restore point from before the problem arose.
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
System Recovery
If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
For more information on performing a recovery, see the following article:
How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
Contact Customer Support
If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

See this Microsoft article - http://support.microsoft.com/kb/314060/en-us For ways to fix manually
and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
(these are from the Microsoft article)
Resolution 2: Use the CD/DVD Fix it troubleshooter
To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
Windows 7, Windows Vista and Windows XP
The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                This troubleshooter fixes many problems. learn more
Run now
If your problem is not solved, try the next
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

A65-S159 - I can't use the CD Recovery because my CD/DVD doesn't work properly

Hi, I need help to reinstall the system and drives. It's a Satellite A65-S159. The CD/DVD doesn't work properly. Rarely, the CD/DVD can read a DVD. So I can't use the CD Recovery. What may I do?
Thank you,
Cabula, Brazil

There are two ways to run the recovery DVD, one is from Windows. Instead power ont he computer with the disk in the drive. And imediatly after powering on start pressing the F12 key. After a few seconds you should see a boot device menu that you can select the CD/DVD drive to boot from. Try that and let us know if you got the boot menu, and if the disk worked.
This signature left intentionally blank.

Flatten to sring doesn't work properly.

Using LV8.20, found "flatten to string" function under 7.x function group. but it doesn't work properly in lv8.20. Is there a function "flatten to string" function in LV8?
Thanks.

Not sure where you found the 7.x functions palette. I found the function under Numeric>>Data Manipulation.
NI changed some things about data representation and flattening in LV8, so if you want to work with old data, you should right click the function and select Convert 7.x Data.
There is a rant here about the palette being in a problematic location, but that will go into the proper thread.
Try to take over the world!

Sorting albums by year doesn't work properly in new iTunes 11.

Sorting albums by year doesn't work properly in new iTunes 11.
See the screenshots below.
There's a kind of albums. Double CD in one set. Queen "The Works" 1984, for example.
First CD is the original release and the second one is bonus CD for the original album's reissue in 2011.
iTunes 10 took year info from track 1 of CD1 for "sort album by year" function.
But new iTunes 11 takes the highest value of year in the album's track list.
Same things with additional bonus tracks for the album's reissues.
See the screenshot of Madonna "Like a Virgin" 1984 album.
So my collection is in a huge mess after last update to iTunes 11.
It's a big problem. And must be solved to the next update.

I noticed this too, and I think it gets even more complicated when you think about the difference between how you want Re-releases to be ordered: based upon the intial release year (like you have described above), and Compilations or Greatest Hits: where you want them to be sorted by when the albums were actually released. iTunes 11 seems to just grab the date of the most recently released song on an album. This worked fine for 2/3 of my Compilation albums, because they just happened to be released the same year as the latest song on each album.
Compilation example (released: 2003, latest song on album: 1969):
This is what I submitted to Apple as feedback:
This issue is actually aimed at iTunes 11, but 10.6.3 is the most recent version number I could select in the drop-down menu.
As with normal albums, iTunes 11 puts a release year next to "Various Artists" in Albums > Expanded View (and also in the Songs and Genre Tabs). However, iTunes seems to produce this number by looking for the last released song on the album. This has worked fine for 2/3 of my compilations, but the third one is a 60s compilation released in 2003. It displays "1969" next to "Various Artists" and there are no tags available in Get Info to change this. This also happens to greatest hits collections.
When selecting View > View Options > "Artist" then "Year" in Album view, and View > View Options > "Year" in Artist and Genre view, the above issue causes compilations, greatest hits collections, and re-releases (Although users may want re-releases to be listed in order of original release) to be sorted in the wrong order.
Considering iTunes 11 has added this feature (in previous iTunes versions, "Year" would only appear next to individual tracks), it is a shame an "Album Year" or "Sort Album Year" hasn't been added to the Get Info options.
As is, the only solution I can think of is to change all track years to the release year of the album.
I imagine this might be a bit of an edge case, and not something the majority of iTunes users would care about, but then again, I could imagine a fair number of musicphiles wanting control over this metadata.
Message was edited by: folo1988, info added.

Selecting with colour range doesn't work properly

Similar Messages

Maybe you are looking for