Selection by color range and sampled colors

Hello!
I'm selecting areas using 'Color Range' and I was wondering if there is a way to view/edit the list of sampled colors (I've seen an option to load/save that list, but I'm looking for a simple way to view it inside Photoshop).
Thanks!!

I don't see anything in the interface that does this and I don't know if it is possible with other (external) means. Save and Load simply saves your settings (current choice of Fuzziness, Range, etc.)
The predefined color and tone choices in Color Range are not the equivalent of sampling a color with the color picker but rather calculations based on algorithm such as the one used in the Selective color to find colors based within a certain hue or tonal range.And the available choices give you all possible primary hues.
I'm not sure how practical what you want would be - I can't imagine for what would you need this but if that's what yo want, why don't you create a small image painted with the colors of the list of colors you want to use. Then make sure to have both images opened next to each other, apply Color Range on your original image and sample the colors from the other.

Similar Messages

How to modify a select option without range and mutiple selection??

hi all,
i need to modify a select option by removing the range and option for multiple entry. i other words i need to make select option as parameter.( because i cannot use parameter in my program due to some constraints.)
is it possible to change the select option as per my requirement if yes please let me know how is it possible.
Thanks in advance.
Sreekanth.

hi,
Yes u can use code like following way..
select-options : s_matnr for mara-matnr no-extension no intervals.
Reward if helpful.
Regards
Gagan

Select Date between range and display

Hello - i need some ideas to the following:
I need to create a form to submit some information, with the
date that form was submitted, to a database using php.
Once the form is submitted i need to retrieve multiple rows
from the database based on a selected date range, and display the
information
Question one - any ideas on the flow that i need
question two - how do you think that i best record the date -
given that i need to select a range later.
question three - how do I select mutiple rows give a range of
dates
Thanks

Hello - i need some ideas to the following:
I need to create a form to submit some information, with the
date that form was submitted, to a database using php.
Once the form is submitted i need to retrieve multiple rows
from the database based on a selected date range, and display the
information
Question one - any ideas on the flow that i need
question two - how do you think that i best record the date -
given that i need to select a range later.
question three - how do I select mutiple rows give a range of
dates
Thanks

How do I select a color range like in Photoshop OR copy/move a layer into the mask of another layer?

Hi there,
I'm trialling Photoshop Elements and wanting to use a black and white (grey scale) layer that I've made as a mask in another layer and don't know how to do it in Elements. In Photoshop, I'd do this (there maybe a better way in PS to do it, but I haven't discovered it yet)...
Click the layer i've created that I intend to use as a mask
Select All
Copy
select layer that I want the mask to be applied to
click the Add Layer Mask button (at the bottom of the Layers window)
click the mask icon so it is highlighted (and the image isn't)
switch to Channels view
highlith the Layer Mask beneath the R,G,B layers and make it visible
Paste
make it invisible again
switch back to layers.
This works and retains the full range of transparency for semi transparency and soft edges of the mask etc.
Alternatively, I can select a Color Range, but that doesn't seem to be available in PS Elements.
So, how do I achieve the same result in PS Elements?
Thanks for your help
Jonno

Perfect! Thanks very much R_Kelly. That does exactly what I was hoping to do.
Cheers
Jonno

The 'selected items' color randomly changes and I can't figure out why.

Hi everybody, I recently upgraded to Firefox 13, which appears to be the most stable browser version so far and I really like it. I have loved Firefox very much, having used it since somewhere between versions 2 and 3.
After upgrading to version 13 I noticed something that annoys me quite a bit. This may have been present before but I can't remember and I did not notice until now.
On my computer (Windows 7 x64 Ultimate) I have set the color of the 'selected items' (specifically text) to be lime green text on a slightly off black background. I chose this color scheme because it blends very well with Firefox itself (I have the NASA night launch theme), Windows Explorer, and many web pages that I have changed to a dark theme (using the Stylish browser extension). This color scheme has excellent contrast in areas with black text on a light background, as well as light text on a dark background. It has served me well.
After upgrading to Firefox 13 I have noticed that if the web page is dark with light text, the 'selected items' color changes to lime green text on a light grey background. (Less frequently, it changes instead to off-black text on a lime green background). I have not been able to isolate the threshold where this change occurs (meaning how dark the website background needs to be /how light the text needs to be for this to happen) nor have I found a solution.
This problem sometimes extends even to sites that have dark text on a light background: when tabs are switched, with no input fields clicked and the address bar is not clicked. This very page (Firefox support) is apparently vulnerable as well.
This problem only happens on rendered web pages. Firefox's menus, buttons and toolbars, as well as all other programs and Windows itself, are unaffected.
I want the 'selected items' to remain as I have set it, and not deviate regardless of the apparent contrast or color scheme of the web page being displayed.
[Edit #1]: Interestingly, as I was copying the information from about:support I noticed that it is affected as well.
Any suggestions? Thanks so much, and I am sorry for the long-winded description. tl;dr look at the pictures.
[http://i.imgur.com/vmLZ6.png selected items]
[http://i.imgur.com/d8xsa.png example1]
[http://i.imgur.com/2OE9J.png example2]
[http://i.imgur.com/1lhvb.png example3]
[http://i.imgur.com/UWOOp.png example4]

It is always best to avoid making changes to the selected text colors.<br />
Firefox uses an algorithm to check if the contrast is sufficient and will swap text and background colors if that test fails.<br />
*http://mxr.mozilla.org/mozilla-central/source/layout/generic/nsTextFrameThebes.cpp#3349
*http://forums.mozillazine.org/viewtopic.php?f=38&t=1331845

Hello. I am trying to change the colors on my ical. I have been able to select a calendar group, click "get info" and then "other" in the color options and which point a a lot of color options are available. HOWEVER, I can't seem to select the color.

Hello. I am trying to change the colors on my ical. I have been able to select a calendar group, click "get info" and then "other" in the color options and which point a a lot of color options are available. HOWEVER, I can't seem to select the color. I click on a new color and press enter and nothing happens...not sure what I am doing wrong.

What do you currently see?
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Do you have the menu bar?
*Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
Do you have any toolbars visible at all?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf

HELP ! why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !

HELP ! why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !
what am i missing ??!!

Please add you system info and SpeedGrade version and build number if you actually want help.

Selecting solid colors with Eyedropper

Where is the option to have the Eyedropper only select solid colors and not multiple colors when sampling colors? I select the Eyedropper tool and do not see any options for this in the control panel.
I only have options for Sample Size, which layers to sample from, and whether to show sampling ring.
Thanks.

Not sure what you really mean by "solid color." A 1 px sampler will sample the solid color of that one pixel. If you increase the sampler size, it will start to average the sampled pixels. It will still be a solid color, jut a blend of the sampled pixel. So if you want just the exact color that you're sampling, you should go with the 1 px size.

Selection background color in 452 vs 447

I am using a TextFlow with a SelectionManager. I have not been able to track this down, but since switching from build 447 to 460 today, my selection background color does not change during a selection. The selection works fine and it copies fine, but i do not see any visual indication that it is selecting. I moved back to build 452, and that also has this issue. Build 447 did not. Looking at the changes from 447 to 452 (http://labs.adobe.com/technologies/textlayout/builds/changelog.html?452) doesn't give me any hints as to what I am doing wrong. I tried out the SelectText sample in 460 and it works fine, so its not an inherit flaw in the selectionmanager, just something I am doing incorrectly or differently.
The code I am using is too interweaved with other code to post here, but does anyone know off hand of a change between 447 to 452 that could cause this issue? I am going to try to take my code out and get it to break in a testbed and then slowly move back towards the most basic (ie: the example SelectText.as) and see if I can figure something out.
Any help would be appreciated,
-Kevin

I am using a TextFlow with a SelectionManager. I have not been able to track this down, but since switching from build 447 to 460 today, my selection background color does not change during a selection. The selection works fine and it copies fine, but i do not see any visual indication that it is selecting. I moved back to build 452, and that also has this issue. Build 447 did not. Looking at the changes from 447 to 452 (http://labs.adobe.com/technologies/textlayout/builds/changelog.html?452) doesn't give me any hints as to what I am doing wrong. I tried out the SelectText sample in 460 and it works fine, so its not an inherit flaw in the selectionmanager, just something I am doing incorrectly or differently.
The code I am using is too interweaved with other code to post here, but does anyone know off hand of a change between 447 to 452 that could cause this issue? I am going to try to take my code out and get it to break in a testbed and then slowly move back towards the most basic (ie: the example SelectText.as) and see if I can figure something out.
Any help would be appreciated,
-Kevin

Allow the "Select a Color" eyedropper to select from the image.

For example: you want to enhance the sky with blue... it takes several attempts to get a natural oxygen blue from the rainbow box. The ability to select that color direct from the image would give quicker and more accurate results.

Ian Lyons wrote:
Feature already exists.
Open the Adjustment Brush colour palette, click down anywhere on the palette while holding down the Alt/Option key, now while still holding down the Alt/Option key move the eyedropper to the image and click the spot you want to sample from.
At least for me on Windows, you don't need to hold down a key. Just click-and-drag.

How to select a color of cell in REUSE_ALV_HIERSEQ_LIST_DISPLAY

Hi.
I need to select a color of a cell in REUSE_ALV_HIERSEQ_LIST_DISPLAY.
I have found an example, but
It shows how to select a color of sell in REUSE_ALV_LIST_DISPLAY.
Can you give me an example of code?
Thanks.

Here ia a simple example of the method how to paint a cell / line / column using REUSE_ALV_HIERSEQ_LIST_DISPLAY function.
Programm:    zalv_hierseq_color
Paint a line, a colomn, or a cell
using REUSE_ALV_HIERSEQ_LIST_DISPLAY
Victor Stupin, Russia 2009
REPORT zalv_hierseq_color.
TABLES: spfli.
TYPE-POOLS: slis.
SELECTION-SCREEN BEGIN OF BLOCK rad1.
PARAMETERS:
        p_row TYPE i,
        p_col TYPE i.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN COMMENT /1(50) comm1.
SELECTION-SCREEN COMMENT /1(50) comm2.
SELECTION-SCREEN COMMENT /1(50) comm3.
SELECTION-SCREEN END OF BLOCK rad1.
INITIALIZATION.
comm1 = 'Paint a line: fill ONLY p_row (p_col is empty)'.
comm2 = 'Paint a colomn: fill ONLY p_col (r_row is empty)'.
comm3 = 'Paint a cell: fill P_COL and R_ROW'.
DATA:
        t_fieldcat TYPE slis_t_fieldcat_alv,
        fs_fieldcat LIKE LINE OF t_fieldcat,
        fs_layout TYPE slis_layout_alv ,
        w_color(4) ,
        w_row TYPE i,
        w_fieldname(20),
        w_prog TYPE sy-repid.
DATA:
BEGIN OF t_spfli OCCURS 0,
        color(4),
        checkbox ,
        cell     TYPE slis_t_specialcol_alv,
        carrid   TYPE spfli-carrid,
        connid   TYPE spfli-connid,
        cityfrom TYPE spfli-cityfrom,
        cityto   TYPE spfli-cityto,
        distance TYPE spfli-distance,
        keyln    TYPE int4,
        box      TYPE char1,
        lineno   TYPE int4,
END OF t_spfli.
DATA:
fs_cell LIKE LINE OF t_spfli-cell.
DATA: gt_item    LIKE TABLE OF t_spfli WITH HEADER LINE,
        gt_header LIKE TABLE OF t_spfli WITH HEADER LINE,
        gs_keyinfo TYPE slis_keyinfo_alv.
START-OF-SELECTION.
SELECT *
FROM spfli
INTO CORRESPONDING FIELDS OF TABLE t_spfli.
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 1.
fs_fieldcat-tabname = 'GT_HEADER'.
fs_fieldcat-fieldname = 'CARRID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = 'X'.
fs_fieldcat-hotspot = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 2.
fs_fieldcat-tabname = 'GT_HEADER'.
fs_fieldcat-fieldname = 'CONNID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = 'X'.
fs_fieldcat-hotspot = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 3.
fs_fieldcat-tabname = 'GT_HEADER'.
fs_fieldcat-fieldname = 'DISTANCE'.
fs_fieldcat-key = ' '.
fs_fieldcat-edit = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 4.
fs_fieldcat-tabname = 'GT_HEADER'.
fs_fieldcat-fieldname = 'CITYFROM'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = ' '.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 5.
fs_fieldcat-tabname = 'GT_ITEM'.
fs_fieldcat-fieldname = 'CARRID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = 'X'.
fs_fieldcat-hotspot = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 6.
fs_fieldcat-tabname = 'GT_ITEM'.
fs_fieldcat-fieldname = 'CONNID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = 'X'.
fs_fieldcat-hotspot = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 7.
fs_fieldcat-tabname = 'GT_ITEM'.
fs_fieldcat-fieldname = 'DISTANCE'.
fs_fieldcat-key = ' '.
fs_fieldcat-edit = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 8.
fs_fieldcat-tabname = 'GT_ITEM'.
fs_fieldcat-fieldname = 'CITYFROM'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = ' '.
APPEND fs_fieldcat TO t_fieldcat.
p_col = p_col + 4.
LOOP AT t_fieldcat INTO fs_fieldcat WHERE tabname = 'GT_ITEM'.
    IF fs_fieldcat-col_pos EQ p_col.
      fs_fieldcat-emphasize = 'C600'.
      w_fieldname = fs_fieldcat-fieldname.
      IF p_row IS INITIAL AND p_col GT 0. " <---- paint only column if p_row is empty
        MODIFY t_fieldcat FROM fs_fieldcat TRANSPORTING emphasize.
      ENDIF.
    ENDIF.
ENDLOOP.
fs_cell-fieldname = w_fieldname .
fs_cell-color-col = 6.
fs_cell-nokeycol = 'X'.
APPEND fs_cell TO t_spfli-cell.
IF p_row IS NOT INITIAL AND p_col IS NOT INITIAL. " <---- paint a cell
    MODIFY t_spfli INDEX p_row TRANSPORTING cell.
ENDIF.
fs_layout-info_fieldname = 'COLOR'.
fs_layout-coltab_fieldname = 'CELL'.
fs_layout-f2code = '&ETA'.
gs_keyinfo-header01 = 'KEYLN'.
gs_keyinfo-item01   = 'KEYLN'.
LOOP AT t_spfli INTO gt_item.
    gt_item-keyln = 1.
    gt_item-lineno = gt_item-lineno + 1.
    APPEND gt_item.
ENDLOOP.
READ TABLE t_spfli INDEX 1 INTO gt_header.
gt_header-keyln = 1.
gt_header-lineno = 0.
APPEND gt_header.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
    EXPORTING
      is_layout                      = fs_layout
      it_fieldcat                    = t_fieldcat
      i_tabname_header               = 'GT_HEADER'
      i_tabname_item                 = 'GT_ITEM'
      is_keyinfo                     = gs_keyinfo
    TABLES
      t_outtab_header                = gt_header
      t_outtab_item                  = gt_item
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF sy-subrc = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to set selected text color in Spark TextInput

I'm trying to make Spark TextInputs and MXFTETextInputs look like Halo/MX TextInputs as much as possible, since I have a mix of both Spark and MX TextInputs in my application. I know I can set the
selection background color to black using focusedTextSelectionColor. How can I set the selected text color to white so it matches the MX white-on-black look?

This works, if you set the enabled property directly on the s:TextInput:
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx">
    <s:layout>
        <s:VerticalLayout horizontalAlign="center" verticalAlign="middle" />
    </s:layout>
    <s:controlBarContent>
        <s:CheckBox id="ch" label="enabled" selected="true" />
    </s:controlBarContent>
    <fx:Style>
        @namespace s "library://ns.adobe.com/flex/spark";
        @namespace mx "library://ns.adobe.com/flex/mx";
        s|TextInput:disabled {
            color: red;
    </fx:Style>
    <s:Group>
        <s:TextInput id="ti" text="The quick brown fox jumps over the lazy dog" enabled="{ch.selected}" />
    </s:Group>
</s:Application>
It can get a bit trickier when you're setting the enabled property on a parent container, since (I believe) that the child control's enabled properties are still set to true and just the container is disabled. One possible workaround would be to bind the child TextInput control's enabled property to the container's enabled property. That way the s:TextInput should still go to it's disabled state and you can customize the disabled state's styles to have darker text, or whatever else you want.
<s:Group id="gr" enabled="{ch.selected}">
    <s:TextInput id="ti" text="The quick brown fox jumps over the lazy dog" enabled="{gr.enabled}" />
</s:Group>
Peter

Selecting custom colors in Microsoft Word

I am really sorry if this is not the right place to ask this, but I can't find a better forum, and the official Microsoft newsgroup is lousy, so I'm hoping someone here will be able to help.
I have a MacBook running OS X 10.4.10 and I use Office 2004 for Mac OS X.
When I click "More Colors...", to select a custom color for a font, for example, the button flashes, but no custom-color selector appears. I have no idea why. http://tinyurl.com/2ysn3l is a screencast I made to demonstrate what I mean. In it, I click "More Colors...", then select a few of Microsoft's preapproved colors to show that those do indeed work, and then click "More Colors..." a few more times.
To be clear, it's not limited to just the font-color pane. Shading for cells in tables is affected in the same way, as are all other color selections. I can only use Microsoft-approved colors! Help! Thanks so much!

Also, I should make clear the fact that I have not accidentally uninstalled the default OS X color picker thing. In, for example, an image-editing program, I can select a color quite normally using the OS X color selection thing, with the crayons and the sliders and all that jazz.
I am not sure if Office uses the OS X color selector, or its own. Either way, I don't have any color selector at all right now for Office, except the crippled couple of dozen colors Microsoft offers by default.

Selecting a color in FCPX

Hi,
I was wondering if there is a way to select a color in a clip and make eveything. I have a chick that is wearing a red shirt and i want her to be in color but everthing else in black and white.... like that scene in schindlers list where the little girl is in a red dress, but everything else is b/w.
tnx
jay

Click the little eyedropper button
Make the selection. Use Shift click or drag to add to the selection. Option to remove from the selection. Option drag on the slider to soften the mask. In the color board at the bottom there selections for inside and outside. Select outside the mask and pull the overall saturation down.

Photoshop CS 6 - image -canvas - make double matt - select color - if I select wrong color, how do I change to a new color, right now it won't change to the new color I select, WHY?????

Photoshop CS 6 - image -canvas - make double matte - select color - if I select wrong color, how do I change to a new color, right now it won't change to the new color I select, WHY?????

Hi, The options bar shows sample size 101 by 101 Average. That was my problem. When I was troubleshooting in order to try to explain to you what was happening, I noticed that when I sampled my models teeth, it gave me a color a bit lighter than her lipstick as my foreground color in my tool box. That started me thinking in the correct way. I didn't realize that my sample size had somehow gotten switched from point sample to 101 by 101 average. I appreciate the help. Thank you.

Selection by color range and sampled colors

Similar Messages

Maybe you are looking for