Selection Checkbox is deactivated in Transport connection

HI Experts,
I have to transport query from dev to Quality, when I selected the query in transport connection. The selection check box is not in active mode. can any one tell me why I am getting this problem..
Regards,
SVS

if u r using existing transport request, please check the details of all object collected in that transport (use SE01 / SE09)..
if transport contains only required query and not other things (which u dont want to move to quality), then u can use the TR.. else unlock the other items or delete them from TR.

Similar Messages

Why the "Change Package" in Transport Connection shows "Request/Tasks"?

We want to transport our custom InfoCubes from Developement environment to Test environment:
RSA1 -> Transport Connection, select an InfoCube we created and drag it over to the right frame, group it by "In Dataflow Before and Afterwards". The Package column shows it's attached to $TMP that we would have to change it to a custom package that it can be transported over. We click the Package picture icon with a pencil trying to change the package attached from $TMP to a custom one, but can't find any custom package we created with SE80 from here and instead, in this window, the first column is "Request/Task" and the values under this column are all checkboxes. The last column is "Object Name". I wonder if the "Change Package" picture icon only lists all the request/task for the selected transport objects selected other than the packages we expect? Weird!
Thanks

hi Kevin,
the 'normal' way has been explained by Roberto and Siggi.
if you still want change package screen in transport connection, it will go to package change/object directory entry screen after you mark the 'request/task' and click 'V'
Re: Why created package with SE80 can't be found in Transport Connection?

Why created package with SE80 can't be found in Transport Connection?

We want to transport our custom InfoCubes from Developement environment to Test environment:
RSA1 -> Transport Connection, select an InfoCube we created and drag it over to the right frame, group it by "In Dataflow Before and Afterwards". The Package column shows it's attached to $TMP that we would have to change it to a custom package that it can be transported over. We click the Package picture icon with a pencil trying to change the package attached from $TMP to a custom one, but can't find any custom package we created with SE80 from here. Could someone tell us why?
Thanks

hey AHP,
Yeh, if I run rsdcube and follow the menu you specified, I can assign the InfoCube to the custom package I created with SE80. I wonder why it's to work in this way? If clicking the Package picture icon with pencil in Transport Connection doesn't work or successfully to bring up the correct custom package we created, then why SAP has this stupid picture icon over there to mislead our developers?
You asked me how we created the custom package, we created them with SE80.
BTW, someone says that's BASIS work to create package to do the transports in their companies, how about your company? You don't have to create custom package and just assign the objects to the package BASIS creates for you?
Also someone says the ideal transport strategy is to group by "Necessary" other than "Dataflow Before and Afterwards", how do you think?
Thanks

RMI Protocol over JRMP transport: connection refused

I changed the look and feel for disco plus to Jinitiator. I then started getting error RMI Protocol over JRMP transport: connection refused to host: 192.168.1.1
I changed the settings back to java plugin 1.4 but I'm still getting the same error on all client machines.
I'm running windows 2003 and application server 10.1.2.0.2
Thanks for any help,
Brian

Hi Brian
When you changed to JInitiator what did you set the style to be? Also, why would you not want to use the Sun Java?
Anyhow, try getting the users to clear their local Sun Java cache, this will release the applet causing it to reload upon next connection, and try again.
If you want to retry JInitiator, try this:
1. Go to Control Panel | JInitiator 1.3.1.x or whatever version you are using
2. Navigate to the Proxies tab
3. Uncheck Use Browser Settings
4. Click the Apply button
5. Close all browser windows
6. Reconnect to Discoverer Plus
If the above steps do not help, try editing the security details of the Options menu in the Internet Explorer using this workflow:
1. On the client machine, launch IE
2. From the toolbar, select Tools | Internet Options
3. Navigate to the Security tab
4. Click on the Trusted Sites icon
5. Click on the Sites button
6. Add a fully, qualified HTTP link to your server
7. Close all browser windows
8. Reconnect to Discoverer Plus
Of the two solutions above, the first is most likely to fix your issue. However, I advise all my customers to set up the application server connections as being trusted sites.
One additional thing would be to delete your cookies. Discoverer Plus loves cookies.
Best wishes
Michael

Move out Info Provider to other server without transport connection?

Hi All,
Could you share you thought ?
Is there a possibility to move out the info provider design & info object to other server without transport connection ?
The background is our project box will be decommissioned, and unfortunately it's not connected to development box. We've already found how to move out ABAP program, we generate it to XML, than upload it.
How about for info provider itself / info Object ? Is there a possibility to have the same treatment ?
Any thought from all of you ?
If you have the way, appreciate if you can share it to me.
Thanks a lot and have a good day,
Best regards,
Daniel N.

Hi,
From transport side, it is possible. You can create a dummy transport target system, then collect BI objects in request and release it. After release, the exported data is in dir_trans, you can manually copy it to realy target server, put them in dir_trans, and in STMS import Q, select from menu of import external request and import it.

Pop up window occurs when assigning package in Transport Connection

Hi
After collecting objects through transport connection, when i click on Assign package button, a pop up window occurs, which says "Change package for the following Objects" and gives a list of all the objects and check boxes with it.What is the significance of this popup?...
By default i can see that some infoobjects and other objects are checked in this.But some of the infoobjects selected here are not required for my transport. When there are large number of objects
checked here, it becomes difficult to identify and uncheck the objects that are not required.
Is there a standard way to handle this popup?..or Suggest some options to overcome this...so that unwanted objects are not collected here...
Thanks in advance.

I assume you want to transport your objects only. So just collect them in Transport Connection as you are doing now and make sure you have checked all required objects by you. And then just click Transport Icon (Truck). If any object from your list dont have yet package assigned, you can assign and then further collect in by giving transport number. You dont need to click Assign Package button.
Abhijit
Edited by: ABHIJIT TEMBHEKAR on Nov 17, 2008 1:13 PM
Edited by: ABHIJIT TEMBHEKAR on Nov 17, 2008 1:13 PM

[Transport transformation]: Object not found in Transport Connection.

Dear All,,
Would you like kindly help me please .. ???
I have transformation in development that's going to be trasnported to Production.
But somehow, when i go to transport connection, i couldn't find the object there.
The tranformation that i can't see, the transformation that link between datasource and info source. But transformation linking Info source to info provider can be found.
I've already done:
1. Reactivate the object ( i edit, and i activate it).
2. Logging off the system, and log on again.
But for those techniques, i'm still unable to find the object in transport connection .
Could you help me please ??
Is it caused authorization ?? If yes, what authorization made me unable to see it .. ??
Best regards,
Daniel N.

HI
Recheck your Collection of Object at Transport Request , Make sure that you have selected before / after DS because you can only see After Info Source ..
Recollect the objects at Source system and transport them to Target System again Properly.
Transports -Procedure
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
http://help.sap.com/saphelp_nw2004s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
others
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/57/38e1824eb711d182bf0000e829fbfe/frameset.htm
Re: Transport Organizer---
transport query (bex objects)
http://help.sap.com/saphelp_nw2004s/helpdata/en/38/5ee7377a98c17fe10000009b38f842/frameset.htm
Hope it helps and clear.

How to Transport the Business content objects using Transport connections

Hi BI Guru's,
I have installed the BW statistics cubes in BW Devlopment and i want to Transport the same things to Quality using Transprot connection. Please send steps and tips for Transporting the BW statistics collected objects.

Hi ,
While installing have you given any package and created request for this activation? If yes go to SE 09 and release your task and then request. And receive this in STMS in BWQ.
If you do not have created request and saved it in $tmp while activation then you have to go to RSA1 > transport connections> select your cube > grouping> only necessary objects> collect automatically> and press transport button this will give you request no > and then release this request> then go to BWQ> stms> select source system> select your request> and press import request button(white truck sign)> do necessary settings > and say OK. Once your request status is green then its successfully received in BWQ.
Hope this helps.

How to choose request in transport connection?

Hi all,
I need your help. How can I to choose in which request I will include objects in transport connection?
Thanks,

We have two types of requests for BW objects..
1. Customizing Request
2. Workbench Request
and another One for Bex objects
Depends on the object type the corresponding requests are assigned.
ie During activation on prompting screen when you click creation buttion or assignment only corresponding request type will be created/displayed depends on object type.
In other way if you do it from RSA1-> Transport connection, it will allow you to assign only in the right request type with respect to object type else system through you a error with analogous message.
You can create request by different way.
Type 1. During object creation/activation, in prompt you can create a new request else you can assign in existing request.
If you are not getting the prompt during activation then reason is two..
a) Object is in $TMP development class where transport is not possible.
Here go to menupath Extras->Object directory entry->select object..(Assign in appropriate package/development class)
b) Object is already in the request, from se09 you can find the request where object is locked
Type 2. Creation of request from SEO9.
Go to SE09, Select appropriate request type radio button and click ok.
You can directly add the object inside the request if you know the object type and other required details.
Even here you can move the objects from particular request to another request by clicking on option"Include object"
Type 3. Creation and assignment of object from RSA1
From RSA1-> Go to tab Transport connection.
Collect all your required object similar to business content installation.
Click on truck button you will get a prompt where depends on the situation you have to create/assigne development class and create/assign requests.

Need of Transport connection tab

Hi BWers,
What is the need of Transport connection tab in RSA1.for example,I have a cube and I saved in a Transport request.using SE09 I transport it,then What is the need of Transport connection tab.
Sekhar.

Hi,
If you want to transport one cube only then you can transport it through Se09.
But if you want to transport 10 cubes and the corresponding infoobjects and structures along with it then it is not possible for you to go in each individual cubesand corresponding update rules,infosources again and again.......as it a big overhead.
With transport connection you have to just select the cubes and transport connection takes care of other issues with the grouping you use.
Also in the case of Queries it always better to use transport connection as you cannot trasport all the the constituents through SE9.
Also through transport connection you have the flexibility to change the packages of the elements insted of going to go each object individually.
Hope it clears
Thanks

Use an existing request in transport connection

Hello
I want to add objects into an existing transport request with transport connection.
How can i do?
Can i create a new one from transport connection but not transport it automatically? only insert objects inside it.
Thanks.

Dear Fernando Ariel Gonzalez ,
I think we can..
Please go through the steps below,
1. Go to rsa1 -> business content
2. Choose 'grouping' as "in dataflow afterwards"
3. choose 'collection mode' as "collect automatically"
4. choose 'infoproviders by infoareas' - choose appropriate infoprovider and 'insert objects for collection'
5. Select your query / queries
6.choose 'create transport request for BEx' and select appropriate development class
To Release a request....
se09/se10, 'modifiable' is marked, and 'display', cursor on you request and click truck button (release),
if request has 'child' request, need to release it first.
To delete or remove request
Goto SE03
Requets/Tasks > Unlock Objects
Give the Request num & Execute
Now Delete the Request on SE09
It is possible to rmove before transportataion from SE03. Well if you want to remove from after transportation it can happen in a case like this. While you delete the obect in dev, it should ask for a request and when that request is transported the object will get deleted in the target sys too.
For more information....
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
/message/1257362#1257362 [original link is broken]
Re: How to collect & transport new cube & new update rules
Re: Transport to BWQ issue?
Re: Transport a query from BWQ to BWP
Hope it helps you,Revert me back if you have any queries
Regards
Bala

Error "Overlapping selection criteria with DTP" when transporting DTP

When transporting a DTP from Dev to QA I get the following error in the trasnport log:
Overlapping selection criteria with DTP DTP_4APJZSGKYQLUQYBCDBWK707JO
Message no. RSBK019
Diagnosis
The selection criteria for the DTP to be activated overlap with the selection criteria of DTP DTP_4APJZSGKYQLUQYBCDBWK707JO in field , for example, with regard to value . Delta transfer from a source object to a target object is only allowed to transfer each record oncce. However, this cannot be guaranteed if two DTPs have overlapping selection criteria with the 'Delta' extraction mode.
System Response
You cannot activate the DTP with the current selection criteria.
Procedure
Restrict the selection criteria so that they do not overlap with the selection criteria for DTP DTP_4APJZSGKYQLUQYBCDBWK707JO.
The DTP is a delta process which loads data from one infocube into an DSO. I understand that the error is that it is transporting the Delta parameters (something similar to a Delta initialization of infopackages I suppose) but I don´t how to access the information of the delta (selection criteria) of a DTP.
Any suggestions? or similar experiences?
Thanks in advance
nicolá

Hello,
You can modify a parameter to create and modify dtp in Production. Like normally is done with Infopackages. There is no reason to make the changes in Dev in the Infopackages and DTP, and transport to Production. This transports normally cause that kind of errors because the id's are different in Dev, QA and Prod, and it is difficult to change dtp in that way.
To change the parameter do like this:
Execute Trx. RSA1 -> Transport Connection -> Tab Object Changeability -> Change DTPA to Everything Changeable.
Do this in Dev, QA and Prod.
Regards,
Jorge Diogo

Can't see Update rules and infopackage in the transport connection

Hello, experts!
I need to transport newly created (and activated) update rules and infopackage from Dev to QA environment. When I open transport connection and select infosource, I don't see new update rules and infopackage. There are few update rules for different source systems in this infosource and I can see all of them in the transport connection except for this new one.
Your help is appreciated.
Thanks, Alina.

in Transport connection please select ur higher level Object say Infocube...and collect data flow before then you will ur Update rules and IP

Transport process chain by transport connection step by step

Hello expert:
how to transport process chain by transport connection step by step?
Many thanks,

Go to RSA1 -> Transport Connection.
Make sure Only Necessary objects is selected under Grouping.
Expand Process Chain -> Click on Select Objects -> Search for the process chain you want to transport.
Select it and click transfer.
When finished collecting - Click on the Red Truck. Create a transport request when prompted to create a request.
Then go to SE10 or SE09 -> Find your request and right click and select release on your transport request as well as the task under it.
After it is released you can check the log by clicking on the log button and see if your transport moved successfully to target system.
Good Luck.
MP.

TcpListener not working on Azure: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host

Hi Everybody,
i'm playing a little bit with Windows Azure and I'm blocked with a really simple issue (or maybe not).
I've created a Cloud Service containing one simple Worker Role. I've configured an EndPoint in the WorkerRole configuration, which allows Input connections via tcp on port 10100.
Here the ServiceDefinition.csdef file content:
<?xml version="1.0" encoding="utf-8"?>
<ServiceDefinition name="EmacCloudService" xmlns="http://schemas.microsoft.com/ServiceHosting/2008/10/ServiceDefinition" schemaVersion="2014-01.2.3">
<WorkerRole name="TcpListenerWorkerRole" vmsize="Small">
<Imports>
<Import moduleName="Diagnostics" />
<Import moduleName="RemoteAccess" />
<Import moduleName="RemoteForwarder" />
</Imports>
<Endpoints>
<InputEndpoint name="Endpoint1" protocol="tcp" port="10100" />
</Endpoints>
</WorkerRole>
</ServiceDefinition>
This WorkerRole is just creating a TcpListener object listening to the configured port (using the RoleEnvironment instance) and waits for an incoming connection. It receives a message and returns a hardcoded message (see code snippet below).
namespace TcpListenerWorkerRole
using System;
using System.Net;
using Microsoft.WindowsAzure.ServiceRuntime;
using System.Net.Sockets;
using System.Text;
using Roche.Emac.Infrastructure;
using System.IO;
using System.Threading.Tasks;
using Microsoft.WindowsAzure.Diagnostics;
using System.Linq;
public class WorkerRole : RoleEntryPoint
public override void Run()
// This is a sample worker implementation. Replace with your logic.
LoggingProvider.Logger.Info("TcpListenerWorkerRole entry point called");
TcpListener listener = null;
try
listener = new TcpListener(RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
LoggingProvider.Logger.Info(string.Format("TcpListener started at '{0}:{1}'", RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Address, RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint1"].IPEndpoint.Port));
catch (SocketException ex)
LoggingProvider.Logger.Exception("Unexpected exception while creating the TcpListener", ex);
return;
while (true)
Task.Run(async () =>
TcpClient client = await listener.AcceptTcpClientAsync();
LoggingProvider.Logger.Info(string.Format("Client connected. Address='{0}'", client.Client.RemoteEndPoint.ToString()));
NetworkStream networkStream = client.GetStream();
StreamReader reader = new StreamReader(networkStream);
StreamWriter writer = new StreamWriter(networkStream);
writer.AutoFlush = true;
string input = string.Empty;
while (true)
try
char[] receivedChars = new char[client.ReceiveBufferSize];
LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
LoggingProvider.Logger.Info("This is what the host sent to you: " + input+". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
break;
catch (Exception ex)
LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
break;
}).Wait();
public override bool OnStart()
// Set the maximum number of concurrent connections
ServicePointManager.DefaultConnectionLimit = 12;
DiagnosticMonitor.Start("Microsoft.WindowsAzure.Plugins.Diagnostics.ConnectionString");
RoleEnvironment.Changing += RoleEnvironment_Changing;
return base.OnStart();
private void RoleEnvironment_Changing(object sender, RoleEnvironmentChangingEventArgs e)
// If a configuration setting is changing
LoggingProvider.Logger.Info("RoleEnvironment is changing....");
if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))
// Set e.Cancel to true to restart this role instance
e.Cancel = true;
As you can see, nothing special is being done. I've used the RoleEnvironment.CurrentRoleInstance.InstanceEndpoints to retrieve the current IPEndpoint.
Running the Cloud Service in the Windows Azure Compute Emulator everything works fine, but when I deploy it in Azure, then I receive the following Exception:
2014-08-06 14:55:23,816 [Role Start Thread] INFO EMAC Log - TcpListenerWorkerRole entry point called
2014-08-06 14:55:24,145 [Role Start Thread] INFO EMAC Log - TcpListener started at '100.74.10.55:10100'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Client connected. Address='196.3.50.254:51934'
2014-08-06 15:06:19,375 [9] INFO EMAC Log - Buffer size: 65536
2014-08-06 15:06:45,491 [9] FATAL EMAC Log - Unexpected exception while Reading the request
System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
--- End of inner exception stack trace ---
at System.Net.Sockets.NetworkStream.Read(Byte[] buffer, Int32 offset, Int32 size)
at System.IO.StreamReader.ReadBuffer(Char[] userBuffer, Int32 userOffset, Int32 desiredChars, Boolean& readToUserBuffer)
at System.IO.StreamReader.Read(Char[] buffer, Int32 index, Int32 count)
at TcpListenerWorkerRole.WorkerRole.<>c__DisplayClass0.<<Run>b__2>d__0.MoveNext() in C:\Work\Own projects\EMAC\AzureCloudEmac\TcpListenerWorkerRole\WorkerRole.cs:line 60
I've already tried to configure an internal port in the ServiceDefinition.csdef file, but I get the same exception there.
As you can see, the client can connect to the service (the log shows the message: Client connected with the address) but when it tries to read the bytes from the stream, it throws the exception.
For me it seems like Azure is preventing the retrieval of the message. I've tried to disable the Firewall in the VM in Azure and the same continues happening.
I'm using Windows Azure SDK 2.3
Any help will be very very welcome!
Thanks in advance!
Javier
En caso de que la respuesta te sirva, porfavor, márcala como válida
Muchas gracias y suerte!
Javier Jiménez Roda
Blog: http://jimenezroda.wordpress.com

hi Javier,
I changed your code like this:
private AutoResetEvent connectionWaitHandle = new AutoResetEvent(false);
public override void Run()
TcpListener listener = null;
try
listener = new TcpListener(
RoleEnvironment.CurrentRoleInstance.InstanceEndpoints["Endpoint"].IPEndpoint);
listener.ExclusiveAddressUse = false;
listener.Start();
catch (SocketException se)
return;
while (true)
IAsyncResult result = listener.BeginAcceptTcpClient(HandleAsyncConnection, listener);
connectionWaitHandle.WaitOne();
The HandleAsync method is your "While (true)" code:
private void HandleAsyncConnection(IAsyncResult result)
TcpListener listener = (TcpListener)result.AsyncState;
TcpClient client = listener.EndAcceptTcpClient(result);
connectionWaitHandle.Set();
NetworkStream netStream = client.GetStream();
StreamReader reader = new StreamReader(netStream);
StreamWriter writer = new StreamWriter(netStream);
writer.AutoFlush = true;
string input = string.Empty;
try
char[] receivedChars = new char[client.ReceiveBufferSize];
// LoggingProvider.Logger.Info("Buffer size: " + client.ReceiveBufferSize);
int readedChars = reader.Read(receivedChars, 0, client.ReceiveBufferSize);
char[] validChars = new char[readedChars];
Array.ConstrainedCopy(receivedChars, 0, validChars, 0, readedChars);
input = new string(validChars);
// LoggingProvider.Logger.Info("This is what the host sent to you: " + input + ". Readed chars=" + readedChars);
try
string orderResultFormat = Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\xB")) + @"MSH|^~\&|Instrument|Laboratory|LIS|LIS Facility|20120427123212+0100||ORL^O34^ORL_O34| 11|P|2.5.1||||||UNICODE UTF-8|||LAB-28^IHE" + Environment.NewLine + "MSA|AA|10" + Environment.NewLine + @"PID|||patientId||""""||19700101|M" + Environment.NewLine + "SPM|1|sampleId&ROCHE||ORH^^HL70487|||||||P^^HL70369" + Environment.NewLine + "SAC|||sampleId" + Environment.NewLine + "ORC|OK|orderId|||SC||||20120427123212" + Encoding.ASCII.GetString(Encoding.ASCII.GetBytes("\x1c\x0d"));
writer.Write(orderResultFormat);
catch (Exception e)
// LoggingProvider.Logger.Exception("Unexpected exception while writting the response", e);
client.Close();
catch (Exception ex)
//LoggingProvider.Logger.Exception("Unexpected exception while Reading the request", ex);
client.Close();
Please try it. For this error message, I suggest you could refer to this thread (http://stackoverflow.com/questions/6173763/using-windows-azure-to-use-as-a-tcp-server
) and this post (http://stackoverflow.com/a/5420788).
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Selection Checkbox is deactivated in Transport connection

Similar Messages

Maybe you are looking for