Selection Criteria for Delta loads triggered using MDM_CLNT_EXTR

Hi ,
Currently we are required to load data only from two specific account groups . Therefore in the selection criteria in mdm_clnt_extr we maintian these two account groups and extract data.
However, when setting up the delta load there does not to be an option to restrcit the delta to a specify an criteria. Therefore, in our case several records from account groups which are not required are passed on to the MDM system.
Is there a way to address this requirement ?
1. There is an option to run the initial load variants at regular intervals, the problem with this is that in our case we have several variant creates as the R/3 system does not allows extraction on more that 999 records at a time. Therefore at point of time to capture the delta records , if we run all these jobs our network gets choked.
2. Run delta job, but without selection criteria it pulls out records which we don't require
Any suggestions on how this problem can be addressed are welcome ,
Thanks in advance,
Anita George

Thanks Michael !
Well, regarding hte ALE settings, we did take a look in bd64 the filters are based on objects which one of these is relevant for customer account groups ? Probably in the future we would require all data, and then is it enogh to remove the filter ?
Can a filter be maintained at the XI level , this would be good as only the required account groups are passed on to MDM . Is there any documentation on available on this ?
Regarding the Import Manager, will have to check  this functionality, as it is now no matter how many times we update the map/rename /load/unload it automated imports keep failing.
Our R/3 system seems to have problem extracting more than 999 records, as we tried with different number of records and all those extraction jobs got cancelled. So, currently we are running multiple jobs for the initial load and even this is very time consuming.
Thanks & Regards,
Anita George

Similar Messages

  • Can we use both 0FI_AP_3 and 0FI_AP_4 for Delta Loads at the same time.....

    Hi Gurus:
    Currently my company uses 0FI_AP_3 for some A/P reporting. It has been heavily customized & uses Delta loading. However, SAP recommends the use of "0FI_AP_4" for A/P data fro delta loads. I was able to Activate 0FI_AP_4 as well & do some Full Loads in Dev/Test boxes. Question is whether I can use both the extractors for "Delta" loads at the same time......? If there are any issue, what is the issue and how ccan I resolve it? Is the use of only one extractor recommended......??
    Please let me know as this impacts a lot of my development....! Thanks....
    Best...... ShruMaa
    PS:  I had posted this in "BI Extractors" forum but there has been no response......  Hope to get some response.......!  Thanks

    Hi,
    I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
    1. DS: 0FI_AP_4  replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
    2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
    3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
    4. Load the same to a InfoCube (0FIAP_C03).
    Hope this helps.
    Thanks.
    Nazeer

  • How to use a subreport field as selection criteria for the main report

    Dear All,
       I created a report with one subreport and im comparing information from both reports but i need to apply selection criteria in the main report using one of the fields in the subreport, the problem is that the subreport field doesnt appear in the select expert screen. By any chance, someone knows how make a subreport field be used by the select expert.
    Thanks,
    Martha Medrano

    Dear Dom,
       I created the subreport table called IIM (748 items) in sql in the main report as you suggested with the below code:
    SELECT "IIM"."IPROD", "IIM"."IDESC", "IIM"."IID"
    FROM   "S102F360"."BPCS405CDF"."IIM" "IIM"
    WHERE   NOT ("IIM"."IDESC" LIKE 'GEN%' OR "IIM"."IDESC" LIKE 'OBS%') AND "IIM"."IID"<>'IZ' AND "IIM"."IPROD" LIKE '3%'
    and i have another table called ITEM_MASTER (3221 items):
    SELECT "ITEM_MASTER"."ITEM_ID", "ITEM_MASTER"."DESCRIPTION"
    FROM   "WHSPRO"."dbo"."ITEM_MASTER" "ITEM_MASTER"
    ORDER BY "ITEM_MASTER"."ITEM_ID"
    and im trying to display all items in the ITEM_MASTER table that are not in the IIM file but i haven't been able to accomplish this, i am using as primary the ITEM_MASTER table with 'Inner Join' as Join Type,  and '!=" as Link Type. Do you have any ideas on how can i display the requested items.
    Thanks for your help

  • Short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow

    hi all,
    i am getting short dump error for delta load to 0CFM_C10 via 0CFM_DELTA_POSITIONS flow.
    not able to figure out the actual issue and how to solve it.
    can anyone suggest?
    below is the details of the short dump
    Short text
        Exception condition "UNKNOWN_TRANSCAT" raised.
    What happened?
        The current ABAP/4 program encountered an unexpected
        situation.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        A RAISE statement in the program "CL_SERVICE_TRG================CP" raised the
         exception
        condition "UNKNOWN_TRANSCAT".
        Since the exception was not intercepted by a superior
        program, processing was terminated.
        Short description of exception condition:
        For detailed documentation of the exception condition, use
        Transaction SE37 (Function Library). You can take the called
        function module from the display of active calls.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "RAISE_EXCEPTION" " "
        "CL_SERVICE_TRG================CP" or "CL_SERVICE_TRG================CM003"
        "SORT_TRANSACTIONS"
        or
        "CL_SERVICE_TRG================CP" "UNKNOWN_TRANSCAT"
        or
        "SBIE0001 " "UNKNOWN_TRANSCAT"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
        4. Details about the conditions under which the error occurred or which
        actions and input led to the error.

    Hi,
    It seems like some routine are there and check your rotines , transformation etc.
    Regards
    sivaraju

  • SLED for selection criteria for batch search

    good day gurus,
    Is it possible to use SLED (LOBM_VFDAT) as a selection criteria for my batch search? how do i set this up?
    Thanks in advance
    Edited by: obie villamosa on Jun 30, 2008 11:06 AM

    hi
    maintained class in t-code CL01 for you characteristics then sort sequence CU70 as per shelf life, setting expiration date check by OMJE for your plamt and movment type,
    maintained strategy type in spro in production
    Define Batch search procedure and assign your strategy there.
    then allocate your search procedure to your plant in spro
    and then maintained condition type in t -code COB1 for your plant.
    also maintained your class in material master in classification view for batch class
    Regards
    Pravin
    Edited by: pravin dhokey on Jun 30, 2008 8:07 AM

  • ALE change Pointers for delta load

    The master data datasource is 0CRM_BPSALESCL_ATTR, which is in my source system use change pointers for delta loading. When I use delta loading, the error is "ALE change pointers are not set up correctly". I went to the source system, and use BD61 to activate change pointers. But it does not work. Then I created new Business partners to make changes. I can find these new records in table CDHDR and CDPOS, but there is no records found in table BDCP. And my delta loading still got the error as "ALE change pointers are not set up correctly."
    Can anybody give me advice?
    Thanks,
    Wenjie

    Hi, Ron,
    Thanks for your reply. I already assign points to you.
    I relicated the datasource, and re-active the transfer structure, but it still doesn't work. My one more question is that do I run BD61 on BI system or on source system? I did on source system only. And is there any more setting need to be done on source system? Because my error message said setting on source system is wrong.
    Thank you very much.
    wenjie

  • Archiving: adding more selection criterias for MM_EKKO

    Is there a possibility for adding new selection criterias for object MM_EKKO? Any exits for Release 4.6c?

    Deactivated means that you have executed a 2-step archiving.
    You have different residence times. SAP set the deletion flag if residence time one is met, but residence time 2 not yet.
    If both times are met, the PO gets archived.
    for examples see OSS note 948493 - Residence time in new reports RM06EV47, RM06BV47
    You probably have customized the test variant for MM_EKKO as production variant, other wise SAP would not have updated your database.

  • DB14 Backup - No logs exist for the selection criteria for system DEV

    Hello Expert,
              When i click on BRBACKUP button Its showing the info message "No logs exist for the selection criteria for system" .
    so please suggest me where i need to maintain the selection criteria.
    Thanks & Regards
    Annasaheb

    Hi Anna,
    As told by Markus and Eric above...
    you never made a backup on you new installed system....then how system will show you backup details(which were not happened in real)
    Why you are searching for money in an empty pot
    Regards
    Nick Loy

  • Student number as selection criteria for FICA transactions

    Hi experts,
    Is it possible to have the student number as a selection criteria for FICA transaction, for example for payment assignment, among others?
    Do you have a coding example?
    Regards.

    FUNCTION CMAC_EVENT_0210.
    ""Lokale Schnittstelle:
    *"  IMPORTING
    *"     VALUE(I_SELTAB) LIKE  ISELTAB STRUCTURE  ISELTAB
    *"  TABLES
    *"      T_SELTAB STRUCTURE  ISELTAB
    *"  EXCEPTIONS
    *"      UNKNOWN_SELECTION
      DATA: ld_student12   TYPE piqstudent12,
            ld_partner     TYPE bu_partner,
            ld_student(12) TYPE n.
      IF i_seltab-selfn <> c_student12.
        RAISE unknown_selection.
      ELSE.
      to get leading zero's move the student number in a NUMC-field first
        ld_student   = i_seltab-selcu.
        ld_student12 = ld_student.
        CALL FUNCTION 'HRIQ_CMACBPST_SELECT_WITH_STID'
          EXPORTING
          IV_STOBJID                     =
            iv_student12                   = ld_student12
          XREAD_BUFFER                   = 'X'
          IMPORTING
            ev_partner                     = ld_partner
          EXCEPTIONS
            student_not_found              = 1
          INVALID_PARAMETER_ASSIGN       = 2
          OTHERS                         = 3
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ELSE.
          i_seltab-selfn = 'GPART'.
          i_seltab-selcu = ld_partner.
          CLEAR: i_seltab-xsfex,
                 i_seltab-selco,
                 i_seltab-selwu,
                 i_seltab-selwo.
          APPEND i_seltab TO t_seltab.
        ENDIF.
      ENDIF.
    ENDFUNCTION.

  • Additional selection criteria for RHECM_CREATE_COMP_PROCESS (create compens

    Dear All,
    There is a requirement to add additional selection criteria for  RHECM_CREATE_COMP_PROCESS.
    Compensation Plan needs to take several optiions rather than a single option.
    Incentive Plan Type to be added as additional selection criteria
    Do we need to copy the standard program and then modify it or there can be some other way out for it.
    Thanks and Regards
    Shraddha

    have checked out the SDN forums quite throughly and have come up with a couple of questions/solutions.
    1) Copy the program into Z-name space and add in the code
    Question: Where to specifically add the code, the program is huge with multiple enhancement points being seen in the code.
    Can someone please guide me where I can change the displayed records, point where iI can append data or change the internal table being sent for ALV display.
    <b>---> U have to find out , where /how  they defined Selection screeen , final output they are displaying.</b>
    2) Make changes in SPRO>Define field selection for material document list.
    Question: The required field is not present within the listing, It does give the option to make new entries, but I have to specify a program/table and field.
    If I create my own program to get the details and display onto an ALV Grid, will the program be called when I make selections on that requisitioner field?
    <b>---> lot of work to do</b>
    3) This is text copied from a thread, I have lost the link to it.
    Create a Z report that is a copy of the selection include of the standard selection screen include with the additional selection criteria.
    - Export the extra selection criteria value to shared memory.
    - Submit the standard VL10G program with the selection sets.
    - In user exit (depends on which field needs to be checked), import the extra selection criteria value back in and filter the selected data set.
    Could someone please guide me if it is possible to do the above within RM07DOCS, and a little more detail on how to go about it?.
    <b>Better Options --->try to get the logic of MB51 , then do changes which are required.
    most of data , u will get it from MSEGMKPFMARA+MBEW.</b>
    revert back in case of any other issues.
    Regards
    Prabhu

  • Error in activating init flag for delta load

    Hi everybody, I am trying to activate the init flag for delta load, when I schedule the infopak it is taking too long to execute and the status is remaining in yellow for a week. I checked in details tab the error message is u201C no data available in source system u201C Please helpu2026

    Hi Vinod,
    When there is no data available in the source system, you will have yellow flag for the delta init request. Check for the delta queue entry (RSA7) on the source system. Delta mechanism starts working once this flag is created. After that schedule the delta infopackage.
    Also check on the source system whether there is any data avilable in the application tables related to this datasource. Take the help of functional consultants if required.
    Regards,
    Sreenivas.

  • Can we change the selection criteria for RV60SBAT Background Job for Billin

    We have a requirement to add a new selection criteria for RV60SBAT Background Job for Billing. We want to process back order invoices first. So we want a specific background job to select these. So we want to select any orders that are eligible to be invoiced where order date < the date of background job(r sy-datum ). Any ideas where we can introduce this logic for selection criteria?
    Thanks,
       Matt

    Hi Matt
    For your requirement , copy the standard  RV60SBAT program to Z program and in that copied RV60SBAT program , maintain the logic that the backorder invoices should be first processed.Then after that regular background job for billing should take happen .Then your requirement can be fulfilled
    Regards
    Srinath

  • Missing some master data for delta load( its very urgent please)

    Hi,
    I am working master data for delta load,the problem is when ever changes(SO) in r/3 RECORDS for address text,City Dstrct Nm.its not getting loaded into BW.every day some delta records are coming into BW.
    the data coming thru bw satging and bw.Please help what would be reson and where can i find the detail info,where is it missing.Please see below for example.
    Address Number/     Addr Ln 1 Txt/     City Dstrct Nm
    9025750333/                      #/               #     
    help me its very urgent

    Hi Sumanth,
    check the delta queue and the V3 job is it running correctly ,
    Have a look at OSS note :728687
    and also see the following thread
    Deltas are not available in Delta que
    Delta Queues are not cleared in R/3
    No data in RSA7 for 2lis_03_bf : HELP
    check the data may b it is in modifide status not active.
    regards,
    supriya

  • Selection criteria for KFS?

    Hi,
    is it possible to have selection criteria for the Key figurs while desingning the query?
    If yes, please explain me how this could be achived?
    Thanks,
    Ravi

    Hi ,
    Thanks for the answers!
    My scenario is:  I have a sales document cube as well as deliveries cube! There are queries as well on these cubes!
    Now , the requirement is to make a query having the info of both the cubes with the selection criteria as promised date! i had so created multicube and designed a query as well.
    As promised date is keyfigure in both the cubes, i wonder whether this could be possible and thats why i posted my query!
    now i think you can throw some light into it!
    Thanks,
    Ravi

  • Extraction problem - selection conditions for data load using abap program

    Hi All,
           I have a problem loading data over a selected period where the selection of date range is done using ABAP routine (type 6). Here though in the request header tab in monitor screen i'm able to see the selection date range populated correctly, no records are being extracted. But if i delete the abap filter and directly give the same date range for selection we are able to extract data. if any body has faced similar problem and have a solution for it please help me with yur suggestion.
    Thanks,
    nithin.

    It seems the the data range is not properly set in the routine.
    You can check the value of selection period generated by routine in the data selection tab-> execute button is there .
    Click it to to test the selection values generated by the ABAP routine..
    If the value here seems correct one then paste the code of the routine that u have written with brief logic details that u have applied.
    Sonal.....

Maybe you are looking for