Selection criterion in custom DataSource doesn't appear in Infopackage

Hello everyone!
I have implemented a custom DataSource for service processes in CRM.
I have defined a timestamp field as a selection criterion.
In BW, in the Datasource fields tab, this field appears correctly defined, but it doesn't appear in the InfoPackage selection criteria tab.
Any thoughts on this? Any help would be greatly appreciated!!
Best Regards,
Luís.

Have you checked the selection option in Data source maintenance..?
Thanks
Tripple k

Similar Messages

0RT_PA_TRAN_CONTROL DataSource doesn't appear in Transaction SBIW.....

Hi all
i'm trying to use standard POS PIPE Retail Data Sources 0RT_PA_TRAN_CONTORL. This DataSource unfortunately doesn't appear in the R/3 System TAC: SBIW. This DataSource also not exist in table ROOSOURCE, neither in OBJVERS 'A', nor in OBJVERS 'M' or 'D'.
Could anybody tell me, how to add this DataSource in R/3 System, or is this DataSource obsolet and i have to use the "newer" one?
Thanks a lot
Christian Weber

Hello,
0RT_PA_TRAN_CONTROL is a BW based DataSource, that is why it doesn't show in any ERP SBIW. You'll find it in your BW System that has BI_CONT installed.
Regards
Hergen

If i selected to "Create a new backup" and then cancelled that option but want to go back and select "Inherit backup history"; how do i go back and do that since now when i plug in my HD, that option doesn't appear anymore?? Any Help?

If i selected to "Create a new backup" and then canceled that option but want to go back and select "Inherit backup history"; how do I go back and do that since now when I plug in my external hard drive, that option doesn't appear anymore?? Any Help? I bought a MacBook Air, but decided to return it for the newest model, and I wanted to back it up so that I can then back it up on my new MacBook Air. I didn't understand the option to Inherit or start a new back up, and therefore selected the option to create a new backup. I believe I should have selected to Inherit backup history so that when i back it up on the new MackBook Air, it appears the same as the one I'm returning.... Is there anyway that i can re-select the option to Inherit backup history for time machine?

Thanks for sharing this link.
I've posted a question here https://discussions.apple.com/message/22049103#22049103 describing my situation. Are you able to suggest me the right option?

Select option greyed out for fields of custom DataSource (rso2, rsa6)

Hi
Why are several fields, in my custom DataSource (created in rso2) not available for select?
I do not think this is a permission issue, since several fields are selectable, but not all fields.
It is not the data type, since I see other custom DataSources that have the same data type, and it is selectable as a select option.
This is not a DataSource that was provided by SAP, it is completely custom, and uses a custom data definition (defined as a structure via se11), and a custom function.
I have read the responses to similar questions, but have not found an answer that explains how to make the field selectable for select.
What determines which fields can be selected for selection, and which fields have this option greyed out (not selectable)?
I have come across multiple answers, for similar questions, that suggest an abap program to directly update table roosfield.
Is this safe?
IF I choose this route will I need to run the update program on production, or will the change it makes to my dataSource transport with my transport?
(I can test this).
What I most need to know is If this suggestion is safe, or if it has side effects?
Thank you

Hi Eileen,
In Least case to enable the selection for the fields with the below program:
Below code is for your reference which will use to unhide objects in RSO2 or RSA6 for Data source( in code for BELNR, KUNNR, VBELN, BUDAT fields are unhiding for 0fi_ar_4 data source selection option) . Still need any clarifications let me know.
SE38: Create a program for ref below code.
REPORT ZNP_SELE_DS.
tables: ROOSFIELD.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BELNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'KUNNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'VBELN'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BUDAT'.
Thanks & Regards,
Srinu.Rapolu

HT3275 When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option. How do I change this?

When I press "select backup location" in the Time Machine section of System Preferences, my external hard drive doesn't appear as an option. How do I change this? My external hard drive is a FreeAgent GoFlex Drive.

Hi, what Format is the external Drive?
They usually come PC Formatted for Fat32/MSdos, or NTFS... is there anything on it now?
How to format your disks...
http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
(To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
Thanks to Pondini, Formatting, Partitioning, Verifying, and Repairing Disks...
http://Pondini.org/OSX/DU.html

When i select an event for move to trash, it doesn't appear in the trash to be emptied. where is it?

I have iMovie 10.0.4. When I select an event for 'move to trash' it doesn't appear in the trash to be emptied there. Where is it?

Thanks for the reply, have checked and that seems to be the problem, I have plugged in my ipad and the missing app has appeared.

HT201335 when i select apple tv the "mirror" option doesn't appear. how do i resolve this?

when i select apple tv, the "mirror on" tab option doesn't appear below it. Ho can I resolve this? thanks.

Nathan, can you explain the issue in a little detail. What device etc and ios would help.

When I now use the cmd-tab shortcut to go to a different open application it madly scrolls through all the open applications and does not let me select one. Any ideas as to what might be wrong. It doesn't appear to be a sticking key?

When I now use the cmd-tab shortcut to go to a different open application it madly scrolls through all the open applications and does not let me select one. Any ideas as to what might be wrong. It doesn't appear to be a sticking key?

Problem with the cmd-tab keyboard shortcut now cured with the latest software update, so the original problem must have been a software glitch.

The Cluster Node Selection screen doesn't appear installing RAC 9i

The Cluster Node Selection screen doesn't appear installing RAC 9i with OCFS on Windows 2003
We are using patch #2878462 OUI 2.2.0.18.0
The Oracle Cluster check was successful !

more info ...
We are following the doc. id. #178882.1 "Step-By-Step Installationg of RAC with OCFS on Windows 2000" instructions.

Custom DataSource plays in JMStudio, but not in my application

hello everyone. I need someone to help me out who has played around a lot with DataSources.
I have been playing around with custom DataSources for a small while and I have not been able to figure out something and its starting to get frustrating.
First let me tell you what process I exactly follow when I want to create a Custom DataSource (using the "Generating Live Audio/Video Data" datasource code sample as an example - from JMF solutions http://java.sun.com/products/java-media/jmf/2.1.1/solutions/LiveData.html):
1. Suppose the source files (DataSource.java and LiveStream.java) are lying at C:\customds\.
I compile the files like this:
javac -d . DataSource.java LiveStream.java
As a result this directory is formed C:\customds\jmfsample\media\protocol\live which contains all the compiled (interpreted) files.
2. Then I register 'jmfsample' in the Protocol Prefix list and commit the changes using the JMFRegistry GUI.
3. Now if I run JMStudio and enter the URL live: it gives me an error that it can't create a player. I feel this is happening because some classpaths haven't been set correctly. Eventually I figured out that I have to place the \jmfsample\media\protocol\live\ directory inside the <JMF install dir>\lib\. Doing this fixes the problem and now I can go to JMStudio and run the protocol using the 'Open URL'. Giving it 'live://' plays the 'blue screen' like a gem.
4. But here is the catch now. When I create an application which tries to create a player using live:// as a source, it doesn't run and keeps giving me a noPlayerException, or a noDataSourceException (as the case would apply; code given below).
The funny part is that i checked the JMStudio source code for the method that is used to 'Open URL'. I haven't found any siginificant change in the way it opens urls.
I also went a step further and tried to compile and run the JMStudio code myself to trace the code when it is in the process of opening a url. The weird thing is that when I try to do that, giving live:// as a URL gives me the same error that is given by my application. In other words JMStudio when compiled by me gives me same the error of "can't create a player..." when I open the url live://. Has Sun used a JMStudio compiled using a different source file?
Please please anyone tell me what is wrong here.
I have basically tried out these two kinds of things in my code, and both give me a noPlayerException error:
Player guiPlayer = Manager.createRealizedPlayer(new MediaLocator("live://"));and
DataSource ds = Manager.createDataSource("live://");
Player guiPlayer = Manager.createRealizedPlayer(ds);Thanking in anticipation.
regards

Would it be possible for you to expand on your solution a little bit? I'm trying a similar approach, and having a similar problem to yours. From Googling, it appears as if this is a very common problem, and a lot of people give up before they solve it.
I'm trying to use jmf.jag (and optionally add fobs4jmf.jar), not compile it from source. But I am trying to compile my own protocol from source and run it in a debugger. I have all the class files going out to the same output directory, and IntelliJ generally adds them all to the CLASSPATH automatically. But I keep getting NoPlayerException. (If I break down the players construction step-by-step, it seems to fail on "Processor ps = Manager.createProcessor(ds);".)
I'm trying to play a Quicktime movie from memory, and I've confirmed that I'm returning "video.quicktime", that my stream is Seekable and isRandomAccess returns true, my prefix is in the protocol list, and that the package name is correct. I've tried with PLUGIN_PLAYER being true or false, media type being video.quicktime or unknown, and every other permutation I can think of.
Any help would be greatly appreciated.

In the Safari browser on Facebook doesn't appears the symbol of the video call. What can I do?

In the Safari browser on Facebook doesn't appears the symbol of the video call. What can I do? I'm Italian.
Nel browser di Safari su Facebook non mi appare il simbolo per videochiamare. Cosa posso fare? Sono Italiano.

If you are using the Creative cloud app to do the install in the upper right hand corner there is a Gear looking icon. Click on that and select preferences then go to the Apps tab and you can select which drive any and all Adobe software installs to. I suggest you included the folder also. Mine look like this.
D:\Programs Files\Adobe
All the creative Cloud Apps then get installed to the D drive in the Program Files folder in a Sub-folder called Adobe. They are then installed to another Sub-folder for whichever program they are, IE Photoshop, Bridge, Lightroom and so on.
If you are installing the Stand Alone versions then at one point during the initial install system you are given a choice to do a Custom or Advanced install and you have to choose that option then you can select which drive and folders to install to.

One of two synced fonts doesn't appear in Adobe Muse, but in Photoshop CC it does.

One of two synced fonts doesn't appear in Adobe Muse, but in Photoshop CC it does. What can I do?
I synced "Mostra Nova" and "Proxima Nova" with typekit. But only Mostra Nova appears in Adobe Muse. Proxima Nova doesn't. In Photoshop CC both appear. Can I fix this? Or is it a bug, that will be fixed?

Thanks for the screenshots, Martin!
Do you happen to use Suitcase Fusion to manage the installed fonts on your computer? We have recently identified a bug in the program which inteferes with fonts synced from Typekit. More information and a workaround is available here:
http://help.typekit.com/customer/portal/articles/1323222
If not, would you please send your recent sync logs to [email protected], so we can look into this further?
On OS X:
* Open the Finder
* under the Go menu, select "Go To Folder"
* in the windows that opens, type: /Users/(username)/Library/Application Support/Adobe/CoreSync/
Note that you need to replace "(username)" with your own account name; for instance, on my computer I am "galle".
(Or if you are comfortable working from the Terminal, cd to $HOME/Library/Application Support/Adobe/CoreSync/)
On Windows:
C:\Users\user name\AppData\Roaming\Adobe\CoreSync\
Attach the recent CoreSync-yyyy-MM-dd.log files to an email. Please don't send a zip file, as they often get flagged as spam.
Thank you again,
-- liz

HT201303 I forgot my security questions and the option of sending an email to reset the questions to my rescue email doesn't appear . What can I do to retrieve thes question because I can buy in app even I have credit in my account ?????

I forgot my security questions and the option of sending an email to reset the questions to my rescue email doesn't appear . What can I do to retrieve thes question because I can't buy any app even I have credit in my account ?????

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

In Mail, Reply To and Subject area doesn't appear

In Mail, Reply To and Subject area doesn't appear on an opened email.

Hi
Go to Mail / Preferences
on the Viewing tab - Show header detail - drop down box
Select whatever suits you. - try default
/Dennis

Report parameters doesn't appear correctly

I have a report .rdl under Visual Studio2010 and sql server2008.
the report language is arabic and all the fields appears correctly, but the parameters doesn't appear correct it shows stange characers(not question marks) and all the remaining fields show arabic characters correct.
i run the report on internet explorer9.
i don't know what is the problem, i searched alot and there is nothing new. what can i do??

Hi nermo,
You have mentioned that the report is work fine on Chrome. It may be a compatibility issue of IE9. At this time, I suggest that you first check this issue in IE9 Compatibility View mode. Please refer to the following steps:
1. Launch the IE 9, and press Alt+T to select the Tools.
2. Click Compatibility View settings.
3. Check the “Display intranet sites in Compatibility View” option, and click Close.
Reference:
Fix site display problems with Compatibility View
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Selection criterion in custom DataSource doesn't appear in Infopackage

Similar Messages

Maybe you are looking for