Selection deletion to delete a field with no data.

Hi all,
The issue is that my ods displays data:
chart of accounts company code glaccount docnumber serialnumber
abcd 500 000005 1990001
abcd 500 000005 1990001 12334.
I need to delete the document number which doesnot have a serial number.
So, Can i use Selective deletion option and my selecting the serial number =
will it delete the records with serial number is empty???
So that the data in my ods will look show only:
chart of accounts company code glaccount docnumber serialnumber
abcd 500 000005 1990001 12334.
thanxs
haritha

hi,
Yeah to keep the data good looking. Since the data is in gbq. And there were repitive data. So, they want to remove all the data with serno which has empty space.
Will my query will work or not???
thanxs
haritha

Similar Messages

How to delete predefined fields like Provisioning Date in users- create

Hi,
Is there a provision to delete predefined fields like Provisioning Date in users->create form in admin console.
If so, please tell me all the files i need to change.
Thanks in advance

Hi,
You need to comment on following sections in FormMetaData.xml.


          

          

          

Please let me know if you have any questions.
Regards
Nitesh

Populated the new field with historic data

HI,
I have a data for 2 years now I am enhancing the data source how can I populated the new field with historic data.Is it by
1)deleting all the data in BW side and the doing an init then setting up a regular delta
2)running a repair full request with selection condition.
or is there any other option available? which is the best scenario to load these historic data?
Regards,
Ravi

Hi,
I think your datasource is already in production, and you want to data only from today onwards for enhanced fields, i.e. historical data is not required for enhanced fields..
1.Fix ECC down time for 20 to 30 munities
2. Keep all objects on Qty system in ECC and BW.
3.Run Delta laods in BW for 2 to 3 times.So with this step you can clear SMQ1 and RSA7. Check the entries in RSA7, if it is ZERO then it is fine.
4. Move DS from ECC Qty to ECC PROD .
5. Replicate in BW.
6. Move all BW objects from BW Qty to BW Prod.
7. Delete Init load in InfoPackage level (Not in ODS/CUbe).
8.Load Init without DataTransfer.
9.Then Run Delta.
10. Next day on wards deltas will come as usual.
If you need Historical data also.
1.Delete data in Cube.
2.Fix Down Time and load Init then Delta.
Check
SAP Note 328181 - Changes to extraction structures inCustomizing Cockpit
Thanks
Reddy

Replace the empty field with below data content field in xml pub report

Hi Gurus,
Please give me the solution for the Replacement of empty field with below data content field in XML PUBLISHER REPORT.
ex:
Name:Philips.M
Address 1:XP APPTS,
Address 2:S:R ROAD
Address 3:
COUNTRY:INDIA
Here i have to get only address 1,address 2 and the COUNTRY data.I dont want to display Address 3 field here.
Thanks,
David

I'm not sure if this answers your question but you could try putting out the address all in one item in the SQL eg somthing like:
address1 || DECODE(address1, NULL, NULL, 'newline character') ||
address2 || DECODE(address2, NULL, NULL, 'newline character') ||
address3 || DECODE(address3, NULL, NULL, 'newline character')
where 'newline character' is somthing like CHR(12)
Dave

Bulk 2.0 Deletion of Field mapping and Data

I have created a Account Export field mapping using Bulk 2.0 API and after creation, I tried SYNC and retrieved the Data. This was completed without issues.
Then I tried deleting export entity from Eloqua using an HTTP DELETE request.
Using HTTP DELETE,."accounts/exports/24/data";I tried deleting the data.
The request was successful, Eloqua returned a 204 response.
But Using Get request, I was able to retrieve the data again. It wasn't deleted
Again,Then I tried deleting the mapping itself, I got the status as '204 No Content'.
The data got deleted but When I tried '/accounts/exports', the mapping still exists there.
Is anyone aware of this issue and also how to resolve this?

I finally found it. Its mapping's are present in FieldTypes class. Even though its not mentioned in the API.

Update text fields with xml data based on DDL selection of an ID number

Hi guys,
this one should be straight forward, but I cant seem to find a straight forward answer. In a nutshell:
XML file contains ID, Name, Location (so far 3 records in sample xml file)
Form contains a Dynamic Drop down list to allow selection of ID and text fields to display the associated name and location of that ID. The binding of the Drop down works fine, however I need the other fields to update to the associated name and location when different ID's are selected. I assume I'll need some sort of exit event on the drop down list to update the other fields with the Name and location of the ID selected, but I dont know enough to have a stab at it.
please, please, please help, Im starting to pull my hair out.
James.

Hi James,
This would depend on the structure of your XML but assuming you have something like;
<Data>
            <Item>
                        <Id>1</Id>
                        <Name>Name1</Name>
                        <Location>Location1</Location>
            </Item>
            <Item>
                        <Id>2</Id>
                        <Name>Name2</Name>
                        <Location>Location2</Location>
            </Item>
            <Item>
                        <Id>3</Id>
                        <Name>Name3</Name>
                        <Location>Location3</Location>
            </Item>
</Data>
Then in the change event of your dropdown (your could use the exit event but then value might not have changed so would be performing unnecessary processing) add the following code.
var itemGroup = $data.Data.resolveNode("Item.(Id.value === '"+xfa.event.change+"')");
Name.rawValue = itemGroup.Name.value;
Location.rawValue = itemGroup.Location.value;
The xfa.event.change will be the value selected, the resolveNode will return the Item with the matching Id, and then it is just a matter of assigning it to your form fields.
Hope this gets you started.
Regards
Bruce

Update new field with existing data programmatically

I have a requirement to write a code that update an existing lookup field.
We are running sharepoint 2010. We have a content type, which is used throughout all the sites. The content type has a field called Product, which is a lookup field for all the products we have. The field also contains subproducts. For example, a product
by name PR1000 has a subproduct PR1010 all in the same drop down menu.
Now we want to change this grouping and separate them based on product and subproduct. I have created new field called Parent Product (PP) and Child Product(CP).
I would like to programmatically update the Parent Product field with Product and Child PRoduct field with child product if any. So here is how it works; if an existing item or document has product PR1010, I would to update PP with PR1000 and CP with 1010.
The problem I am having in order to start this project is the product field is part of every document library and lists and there are 1000s of items with data for product.
Please help with ideas or suggestions. I am thinking of a feature event receiver, which when activated will automatically update every item with product field not empty.
Thanks for your help in advance.

As Bruno suggested ,if its on time activity and on the all site then so go with Powershell
script. use feature event receiver when it require on the selected site and if this require to extend
other sites so that contol will be at your end,else you need to again modified the powershell script.
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

Fill fields with actual date / timestamp with button

Hello,
I did not find an answer for my following problem.
I want to put a button my adobe form that fills automactically three fields with data from the PC which are:
actual time (of the PC and of course timezone info), date and username, so the User has to press one button to fill all these data for convenience.
So I think it is necessary to program this in JavaScript as an "on-click" action. Since I'am not too much familiar with this, it would be great if someone can post a little sample coding for this (or has some other tipp).
regards and happy xmas
Jörg

you must have target fields for your Date, Time and Username, for example you have a structure in your data view called "ZINFO" with the fields "EDATE", "ETIME","ENAME"
in your layout you need a button where you click on
in the click event you can fill your fields (formcalc)
xfa.resolveNode("xfa.record.ZINFO.EDATE").value = Num2Date(Date(), "DD/MM/YYYY");
xfa.resolveNode("xfa.record.ZINFO.ETIME").value = Num2Time(Time(), "HH:MM:SS", "de_DE");
so you always get time/date when clicking
but how do you know who has opened the form?? did you realize some password protection??
br norbert

Filter the field with people data picker

hi
1.i create the list and put the internal number for each persone
now I have another list that customized it with InfoPath 2010
I want in the form when the user inter the internal number in it's field the field that is for the person appeared itself
I create the data connection and filter the field with display name
and when preview the form ir works but in the sharepoint list it doese'nt work when I filter it with the field=[me]
and when preview the form in InfoPath after the display name there is 3 #
and I thins these # is the problem
plz help me
thanks

Hi ,
According to your description, my understanding is that you want to fill automatically the person column in the second list based on the internal number.
I did a test as the followings:
Create a list called ListA, and add two column: internal number(single line of text), person(Person&Group).
Add some items into the ListA.
Create another list called ListB, and add two column: internal number(single line of text), personB(Person&Group).
Customize ListB with InfoPath, and click the column “internal number”.
Set a rule for the column as the screenshot.
After the above, I tested in ListB, it worked well.
Then I set a filter personB=[me], it also worked well.
Please have a try as my steps, compare the result.
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Selective deletion of 3 month back data in Process chain

Hello,
I have one dso which should contain only 3 month of data.
If i load current month dat it should delete three months back data for eg if i load data for april month then it should delete january month data. I want to do this step in process chain.
How can i do it plz help me.
regards,
Naveen

Hello Naveen
If the DSO is of type Write Optimized, then you could use the following option in the process chain.
1. Include the Step ABAP program ( General services) into the process chain.
2. Enter standard program: RSSM_DELETE_WO_DSO_REQUESTS. Click on Create button for the variant and enter the following details: Enter the name of the WODSO name, Check the box for Delete Requests, Enter the number of days ( in this case 30) for deletion, Check the box if the Requests are delta updated on the WO DSO. Find the snapshot attached.
Also, remember that PSA data should be deleted regularly (30 days in this case). This step should be inlcuded as the first step in the housekeeping activity.
Thanks and Regards,
Ningaraju

How to delete account members with no data (EPMA)

Hi all,
I loaded an account hierarchy coming from SAP in EPMA and now that I have the data into my cube I need to remove all the branches which bottom have no data. I have a list of all used account, and the EPMA ads file, how would you approach this problem? At the moment the Account is a Sparse dimension which all non-bottoms are dynamic, I would like to have some tips before start approaching the problem in some weird way..
Thank you,
bidi

You could just go into EPMA and remove those members from the Dimension Library APPLICATION Pane (The one in the middle that appears when you are exiting an app) by right clicking and "Excluding" from the hierarchy.

How to autopopulate a text field with unique data from multiple data sets

Hi,
I'm a laboratory manager in charge of a hospital project which will be using pdf forms to send and receive data from our end users across the city. I need help with the last part of our pdf form, specifically with a js that will do a bit of text-field autopopulation magic. This, unfortunately, is a beyond what I have taught myself about pdf js functionality.a
The problem:
I need to provide my end users with a text field containing a set of data [A, B, C, D, E, F ...] and the total items in this set [tot#]. The end user needs this information as part of the implementation of this particular laboratory machine.
The particulars
When the end user asks for an experiment to be run, we must specify some pieces of data to help them interpret the results. These are constructed as panels which contain discrete data elements.
For example - One experiment may use two panels, Panel#1 and Panel #2. Panel #1 includes the items A, B, D, E, Panel #2 includes the items A, B, C, F, G.
Thus, the panels may share some of the same items, but, I only want the unique members to be displayed in the text field. If I make a drop down box or checkboxes with the panels, I want to be able to select the panels that we ran and (in this example) have the text field display only the unique items among all the panels that were used:
textfield outpute = A, B, C, D, E, F, G - 7 total.
Any assistance from the pdf community would be very much appreciated.
Thanks!

Thanks for that help.
I should have made it more apparent that I'm very new to scripting and I'm
not a programmer by trade. I have a few questions before modifying the code
you kindly provided.
1) Where should I embed this script? Within the 'selection change' area of
my listbox?
2) Can I replace the term 'arr' with the names of the various items in my
listbox or should I put 'arr#' as the output value for each term?
3) Will this script find and display the unique values when a user selects
multiple items in my listbox?
4) How does the script know where to output the unique members of the
combined set?
I appreciate your patience with me.
ck

How to populate internal table field with text data?

Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test,     IO Test 1, CHAR,       20
ZEA_IO2, CHA, IO Test,     IO Test 2, CHAR,       20
Here is the Code:
*& Report ZAS_BAPI_TEST                                               *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects.              *
*& Text file will hold the Info Object Structure. Text file will be    *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure          *
*& Step 2. Retrieve/Load text file into Internal Table structure       *
*& Step 3. Call BAPI Function to Create IO                             *
*& Step 4. Call BAPI Function to Activate IO                           *
REPORT ZAS_BAPI_TEST                           .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
      Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
        io_name like BAPI6108-infoobject,
        io_type like BAPI6108-type,
        io_txsht like BAPI6108-textshort,
        io_txlng like BAPI6108-textlong,
        io_datatype like BAPI6108-datatp,
        io_length like BAPI6108-intlen,
      END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
      PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
     Copy the file from the workstation to the server        ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename                = p_file
               FILETYPE                = 'ASC'
               HAS_FIELD_SEPARATOR     = SPACE
               HEADER_LENGTH           = 0
               DAT_MODE                = SPACE
               CODEPAGE                = SPACE
               IGNORE_CERR             = ABAP_TRUE
               REPLACEMENT             = '#'
               READ_BY_LINE            = 'X'
             IMPORTING
               FILELENGTH              =
               HEADER                  =
TABLES
    data_tab                = itab-bapi[]
EXCEPTIONS
    file_open_error         = 1
    file_read_error         = 2
    no_batch                = 3
    gui_refuse_filetransfer = 4
    invalid_type            = 5
    no_authority            = 6
    unknown_error           = 7
    bad_data_format         = 8
    header_not_allowed      = 9
    separator_not_allowed   = 10
    header_too_long         = 11
    unknown_dp_error        = 12
    access_denied           = 13
    dp_out_of_memory        = 14
    disk_full               = 15
    dp_timeout              = 16
    not_supported_by_gui    = 17
    error_no_gui            = 18
    OTHERS                  = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
   ELSE.
     pit_data[] = lit_data[].
   ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
           20 itab-bapi-io_type,
           30 itab-bapi-io_txsht,
           50 itab-bapi-io_txlng,
           75 itab-bapi-io_datatype,
           85 itab-bapi-io_length.
endloop.
      SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
      def_filename     = ''
      def_path         = 'C:\'
      mask             = ',Documentos de texto (*.txt), *.txt.'
      mode             = ''
    IMPORTING
      filename         = p_file
    EXCEPTIONS
      inv_winsys       = 1
      no_batch         = 2
      selection_cancel = 3
      selection_error = 4
      OTHERS           = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
    concatenate p_file '.txt' into sel_file.
else.
    sel_file = p_file.
endif.
      Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
    VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
    VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
    VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
     COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
     ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
     NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
     ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
     HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
     ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
     RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
      Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM.                    " RETRIEVE_DATASET
I appreciate your help.
Regards,
Mau

I have used tab delimited file.
Here are file contents
io_name     io_type     io_txsht     io_txlng     io_datatype     io_length
ZEA_IO1     CHA     IO Test     IO Test 1     CHAR     20
ZEA_IO2     CHA     IO Test     IO Test 2     CHAR     20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish

Search help is populating the input field with wrong data

Hi Guys,
I have created a ZCITY table for which has below 2 field
ZZCITY (Code ) (5 Char) u2013 Key field
ZZNAME (City Name ) (40 Character)
I have added a custom field ZZCITY & ZZNAME in CI_CATSDB. Funtional guy has configured to make ZZNAME as VISIBLE and ZZCITY is HIDDEN on CAT2 screen in Data Entry area.
I created search help on table ZCITY with export parameters as ZZCITY and ZZNAME.
In SE11, I have mapped the export parameters with CI_CATSDB
Now in tcode CAT2, when I press F4 on City Name field, the list is displayed with City code and City names. And when I select any city code, the ZZNAME is populated by City code instead of City name.
I want that City Name should be populated in ZZNAME and City Code should be populated in hidden field ZZCITY.
Please tell me how I can fix this problem.
Thanks in advance.
mini

Hi
Try selecting the Improting Check box aswell. if a screen field is hidden or display mode we can not use F4 help for that field.
you can also take the help of DYNP_READ_VALUES to get the selected value before PAI
Check whats happening in Debug.
Cheers
Ram

In CAT2 - The search help populating the input field with wrong data

Hi Guys,
I have created a ZCITY table for which has below 2 field
ZZCITY (Code ) (5 Char) u2013 Key field
ZZNAME (City Name ) (40 Character)
I have added a custom field ZZCITY & ZZNAME in CI_CATSDB. Funtional guy has configured to make ZZNAME as VISIBLE and ZZCITY is HIDDEN on CAT2 screen in Data Entry area.
I created search help on table ZCITY with export parameters as ZZCITY and ZZNAME.
In SE11, I have mapped the export parameters with CI_CATSDB
Now in tcode CAT2, when I press F4 on City Name field, the list is displayed with City code and City names. And when I select any city code, the ZZNAME is populated by City code instead of City name.
I want that City Name should be populated in ZZNAME and City Code should be populated in hidden field ZZCITY.
Please tell me how I can fix this problem.
Thanks in advance.
mini

Hi,
Search helps have a one to one relationship with a screen field. To achive what you are trying to, I would have ZZCITY and ZZNAME side by side, and i would have a drop down only only ZZCITY. The key of the table will be ZZCITY. So when you chose the record, The city will populate in ZZCITY and you can make use of user exit EXIT_SAPLCATS_002 to populate the name automatically in the ZZNAME field.
thanks.
JB

Selection deletion to delete a field with no data.

Similar Messages

Maybe you are looking for