Selection does not contain characteristic combination
Hi Gurus,
I am very new to Planning module. When i have created planning sequence on Aggregation level for 0INM_RC02 Cube, system gives error message "Selection does not contain characteristic combination". Can any one help me what is this error msg and how to rectify this one.
With Regards,
Balachander.S
Hi,
you are trying to post the values which are not in combination for characteristic and its attributes.
For example :
Buisness Area, currency.
India - INR
LV10 - GBP
Now you are trying to post India - GBP,which is invalid.Check in the selection if you are deriving any characteristic on the basis of master data for which you are trying to post invalid entries.
Or
You are using characteristic relatioship for which entries are invalid.
or
You are trying to post the data which is not restricted in filter for example :-
If you have restricted currency as INR in filter and trying to post to GBP then you will get this error.
Regards,
Indu
Similar Messages
-
Eclipse problem selection does not contain main type
i m using eclipse3.3 and have set all the necessary paths in it
but when i run a simple java program just for displaying hello world but
the error comes
selection does not contain main typeYou must have a class with a main method.
The main method must be public, must be static, must return void, must have parameter String [], and is case sensitive (so does Java).
Put this into your class
public static void main(String args[]) {
}Let me know if it answers your question.
Best regards. -
Error msg, "Maximum selection does not contain value 9999999999.
Hi, I am getting this error wile doing Reclassification of HFM Movement.
Error msg, "Maximum selection does not contain value 9999999999 of subassignment HFM CD2 & Asset Type "
in the Data Monitor, ( in Reclass Net Reserve). While running BCF task for a company for period 16/2009
Actually, We have converted the consolidation area from XX(2009) to YY(2010).
Before this task, user has performed the balance carry forward.
My Analysis is as follows:-
Method Used in this Reclassification
RECYX (Reclassify HFM Movement at YE lvl 10)
TRIGGER
Items : 100-299, 9900-9999
HFM Movement Type : O200 to O300
Posting Level : 10
TARGET
Items : 100-299, 9900-9999
Move : O100C
Posting Level : 10
HFM CD2 and Asset type : Ticked
After TEST run in UCMON, the error message comes :-
The "HFM CD2 & Asset Type value 9999999999" is not maintained in Breakdown Categories Y500, Y700 etc.
Breakdown categories in Workbench
Maintained as "OPTIONAL, Initialized value allowed".
Single Selection
1A
1B
AR
GA
Default Selection
99999999999
BCS CUBE
HFM CD2 & Asset Type - coming blank
LOTR
HFM CD2 & Asset Type - Coming blank
Please help to go forward.
In Anticipation,
Deepankar JainThanks a lot Dan for the reply.
Yes, the single selection is 1A, 1B etc, I agree that including this default value 9999999999 in single selection will resolve this issue, but the BREAK DOWN TYPE is OPTIONAL, that means It will also consider a blank value, right?
Also, In the method defined for RECLASSIFICATION in workbench, in the TARGET parameters, the" HFM CD2 and Asset Type" is blank but the "DEFAULT is TICKED" which makes it a mandatory derivation rule.
Please correct me if I am wrong.
Your replies on it are highly appreciated.
Thanks and Regards,
Deepankar -
Eclipse "selection does not contain main type" - but it does contain a main
Hi!
I'm having a strange thing happen to me when using the eclipse IDE in a macintosh envirnment.
I imported a project, complete with package, and all of my classes. and when I try to run my main class, it tells me "selection does not contain main type".
Which is entirely untrue, the class I am trying to run contains a public static void main(), does anyone know what's going on here?the class is quite large, I don't think that it is a problem with the class, because it runs fine on my windows based pc (also in eclipse)...
-
Selection does not contain main type
Hi All,
I am getting the Launch error saying:
"Selection does not contain main type" while running the program in eclipse.
Is there any common aspects from where it is being generated?
Thanks in advance
regardslkarmacharya wrote:
eclipse launch error: "editor doesn't contain a main type"Hi,
Please don't resurrect old threads, and this isn't an eclipse forum. I'm locking this thread. Create a new one if you have a specific Java programming related problem.
Kaj -
[Eclipse Problem] Selection does not contain a main type?
well i am using a GUI builder software which generates java code, i made a simple one to test and it will not compile.
import java.awt.*;
import javax.swing.*;
public class name {
@SuppressWarnings("unused")
private void initComponents() {
panel1 = new JPanel();
label1 = new JLabel();
textField1 = new JTextField();
panel1.setLayout(new FlowLayout());
label1.setText("Name:");
label1.setHorizontalAlignment(SwingConstants.LEFT);
panel1.add(label1);
textField1.setColumns(12);
textField1.setText("hi");
panel1.add(textField1);
private JPanel panel1;
private JLabel label1;
private JTextField textField1;
}it should make a basic swing GUI but it just gives me the error "Selection does not contain a main type"
I did not select in eclipse "use public static void main" i know im not supposed to because this has no main method, but how am i to compile this? =X
Edited by: -Johnny- on May 14, 2008 6:44 PM
Edited by: -Johnny- on May 14, 2008 6:44 PM-Johnny- wrote:
ya i used javac instead of eclipse then running it complains like you say
but is there any way to compile this code and it will work? I was hoping to use this GUI builder for business purposes but it seems like a waste of money so far if i can't make working java application with it =\The code is fine. You need to learn the basics. Start with the intro tutorials at the Sun type and start reading and coding.
Here is what the rest could look like:
import java.awt.*;
import javax.swing.*;
public class name
@SuppressWarnings("unused")
private void initComponents()
panel1 = new JPanel();
label1 = new JLabel();
textField1 = new JTextField();
panel1.setLayout(new FlowLayout());
label1.setText("Name:");
label1.setHorizontalAlignment(SwingConstants.LEFT);
panel1.add(label1);
textField1.setColumns(12);
textField1.setText("hi");
panel1.add(textField1);
private JPanel panel1;
private JLabel label1;
private JTextField textField1;
public name()
initComponents();
public JPanel getPanel()
return panel1;
private static void createAndShowUI()
JFrame frame = new JFrame("name");
frame.getContentPane().add(new name().getPanel());
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.pack();
frame.setLocationRelativeTo(null);
frame.setVisible(true);
public static void main(String[] args)
java.awt.EventQueue.invokeLater(new Runnable()
public void run()
createAndShowUI();
}Edited by: Encephalopathic on May 14, 2008 7:10 PM -
Maximum selection does not contain value 600 of subassignment Subitem-error
Hi All,
I'm getting the following error when i tried to load the file through data stream.
Maximum selection does not contain value 600 of subassignment Subitem
Message no. UCD1038
Diagnosis
The posting item 11100100 has breakdown category BR01 for which a maximum selection was maintained for subassignment Subitem. The current posting value, however, is not in this maximum selection.
System Response
The posting is not possible.
Procedure
Check the maximum selection and the posting.
I have already refered the earlier threads but its of no use for me. I have checked my setting w.r.t to FS item breakdown category, Max selection in breakdown category and sub items all the setting are fine, even i applied the OSS notes no-1074599 still i'm facing the same issue.
Can any one help me with this regards, thanks in advance.
Regards,
MageshHi Dan,
Yes, breakdown category has been assigned with a sub item category which in turn assigned to subitems and this sub item is a part of the sub item category which is assigned in max. selection.
Let me know if you want any more information on the same.
Regards,
Magesh -
Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code -
Migo cannot be done " PO does not contain any selectable items"
Dear SAP Gurus
We have a very urgent issue, while trying to do MIGO for a particular standard PO.
Some down payments have been done to this PO already and now when we try to do the MIGO, system is giving the error "PO does not contain any selectable items"
The accounting document which is created when the down payment is done can be seen in the purchase order History.
Please suggest soem solution
Thanks
kkHi Kavitha,
Please check whether all the po item quantities are received. If any open line items are there then go to item detail po tab in that Select Confirmation Tab and Check whether the confirmation is Z001. Change it to 0001 etc and save.
Try this, if unresolved revert back.
Reg,
Ashok
Assign points if useful. -
Hi,
Need help solving a Task that returns a Task<IEnumerable<Writing>> so I can fill ObservableCollection<ViewModels.IWritingItemViewModel> Writings for my
Design Time Data Page:
<d:Page.DataContext>
<designTimeData:MainPageViewModel />
</d:Page.DataContext>
My constructor does this:
public MainPageViewModel()
var writings = this.GetGroupsAsync();
this.Writings = new ObservableCollection<ViewModels.IWritingItemViewModel>();
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
My var writings = this.GetGroupsAsync(); is:
public async Task<IEnumerable<Writing>> GetGroupsAsync()
await this.GetMenuDataAsync();
return this.Groups;
which in turn gets data from:
private async Task GetMenuDataAsync()
Uri dataUri = new Uri("ms-appx:///DesignTimeData/MenuData.json");
StorageFile file = await StorageFile.GetFileFromApplicationUriAsync(dataUri);
string jsonText = await FileIO.ReadTextAsync(file);
JsonObject jsonObject = JsonObject.Parse(jsonText);
JsonArray jsonArray = jsonObject["Groups"].GetArray();
foreach (JsonValue groupValue in jsonArray)
JsonObject groupObject = groupValue.GetObject();
Writing group = new Writing(
groupObject["UniqueId"].GetString(),
groupObject["IsHeaderInteractive"].GetBoolean(),
groupObject["ViewType"].GetString(),
groupObject["ModelType"].GetString(),
groupObject["Page"].GetString(),
groupObject["Title"].GetString(),
groupObject["Subtitle"].GetString(),
groupObject["ImagePath"].GetString(),
groupObject["Description"].GetString(),
groupObject["GroupId"].GetString()
foreach (JsonValue itemValue in groupObject["WritingMenus"].GetArray())
JsonObject itemObject = itemValue.GetObject();
group.WritingMenus.Add(new WritingMenu(
itemObject["UniqueId"].GetString(),
itemObject["Page"].GetString(),
itemObject["Title"].GetString(),
itemObject["Subtitle"].GetString(),
itemObject["ImagePath"].GetString(),
itemObject["Description"].GetString(),
itemObject["Content"].GetString(),
itemObject["WritingsId"].GetString(),
itemObject["GroupId"].GetString(),
Convert.ToInt32(itemObject["Item"].ValueType)
this.Groups.Add(group);
and I get this Error:
Error 5 'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a using directive or an assembly reference?)
I'm creating collections of:
public interface IWritingItemViewModel : Common.IVariableSizedItem
Models.Writing Writing { get; set; }
and my class for creating data is:
public class Writing
public Writing(
string uniqueId,
bool isHeaderInteractive,
string templateType,
string viewModelType,
string page,
string title,
string subtitle,
string imagePath,
string description,
string groupId
this.UniqueId = uniqueId;
this.IsHeaderInteractive = isHeaderInteractive;
this.TemplateType = templateType;
this.ViewModelType = viewModelType;
this.Page = page;
this.Title = title;
this.Subtitle = subtitle;
this.ImagePath = imagePath;
this.Description = description;
this.GroupId = groupId;
this.WritingMenus = new ObservableCollection<WritingMenu>();
public string UniqueId { get; private set; }
public bool IsHeaderInteractive { get; private set; }
public string TemplateType { get; private set; }
public string ViewModelType { get; private set; }
public string Page { get; private set; }
public string Title { get; private set; }
public string Subtitle { get; private set; }
public string ImagePath { get; private set; }
public string Description { get; private set; }
public string GroupId { get; private set; }
public virtual ObservableCollection<WritingMenu> WritingMenus { get; private set; }
How can I solve or successfully complete this code?
Thanks!...
Code is like a box of chocolates!...I looked into your error message again, I found something interesting:
Error 5
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
does not contain a definition
for 'Select'
and no extension method
'Select' accepting a first argument of type
'System.Threading.Tasks.Task<System.Collections.Generic.IEnumerable<App1.DesignTimeData.Writing>>'
could be found (are you missing a
using directive or an assembly reference?)
That means: Task does not contain the definition for Select. This was reasonable, Task does not inherit IEnumerable interface.
var viewmodels = writings.Select((x, i) => new WritingItemViewModel
Writing = x,
VariableItemSize = (i == 0) ? Common.VariableItemSizes.Writings : Common.VariableItemSizes.Normal,
public async Task<IEnumerable<Writing>> GetGroupsAsync()
You need get the IEnumerable<Writing> for Select use. See this for more information:
How to: Return a Value from a Task
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
J1IEX post than made error like does not contain any selectable items
Respected Sir,
We have purchase the Goods From SEZ unit and it wil be treated as import made.
We doing the following activities
1. Prepared the Import P.O.
2. released the same P.O.
3. Doing the MIRO for Custome Vendor
4. Capture the J1iex
than we fins the below mention ERROR & Diagnoses and ERROR
Document 4400000016 does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
u2022 The document items have already been processed
(Suggest zero lines indicator set?).
u2022 the document items have been deleted or are blocked.
u2022 the document items have been created for a different plant.
u2022 (for reservations only) movements are not yet allowed for the reservation items.
u2022 (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
u2022 A confirmation must exist for the document items.
u2022 The document items must be released first.
u2022 The document is an R/2 document.
Procedure
Make sure your entries are correct.
u2022 If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
u2022 If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
u2022 If the document is a purchase order, production order or a reservation, you can
Kindly doneedfull above mention error
Thanks & Regards
Bipin ShahHI,
Please check whether all the vendor and excise details have been maintained in J1id. i.e Excise rate maintainance.
Hope this helps.
Regards,
Prasanna
Award pls if helpful -
Document 4500016031 does not contain any selectable items
Hi Friends,
I am doing MIGO(godds receipt) and adopted following procedure for MIGO.
ME5J----->(Entered my Proj. defn---> executed
Select material T-20610.
Click the "Assign automatically" pushbutton.
Assign materials T-20620 and T-20630 the same way.
Display the overview of the assignments and then create the purchase order.
Click the "Assignments" pushbutton.
The purchase requisitions are sorted in the overview according to their assignments. You can create new purchase orders by clicking the "Process assignment" pushbutton.
Place your cursor on the line below vendor "C.E.B.".
Click the "Process assignment" pushbutton.
Confirm the first dialog box by clicking the "Continue" pushbutton.
If another dialog box appears, click "New purchase order".
The purchase order appears.
On the left-hand side of the overview, select your three purchase requisitions and copy them to the purchase order.
Click the "Copy" pushbutton.
Save the purchase order.
Click the "Save" pushbutton.
The purchase order number appears in the status bar.
Make a note of the order number: ____4500016031________
Now I got the PO as per above procedure Now While I am doing MIGO---Goods receipt am getting the below message.
Any pointers is appreciated and will be rewarded.
Document 4500016031(PO) does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
o The document items have already been processed
(Suggest zero lines indicator set?).
o the document items have been deleted or are blocked.
o the document items have been created for a different plant.
o (for reservations only) movements are not yet allowed for the
reservation items.
o (for reservations only) the document items are retrograde components
of the order. These are posted using the order confirmations.
o A confirmation must exist for the document items.
o The document items must be released first.
o The document is an R/2 document.
Procedure
Make sure your entries are correct.
o If the system has already processed the total quantity, you can set
the Suggest zero lines indicator. The system will suggest the
quantity zero for the items that have already been processed.
o If you have entered a particular item, cancel the item. If you do
not enter an item, the system searches all of the open items in the
o If the document is a purchase order, production order or a
reservation, you can enter search criteria in the dialog box.
You access the dialog box by choosing Enter with reference on the
initial screen.
o If the document is an SAP R/2 document, you have to cancel it
manually by entering the reversal movement type.
RegardsHi
Check item level Confirmation tab I think this PO is activated for Inbound delivery or Confirmation control
vIVEK -
Document does not contain selectable items.
Hello Gurus,
My purchase team wanted to transfer plant from one plant to other.. and so they are creating STO , without any confirmation , while doing GRN 101 movement type Store person is facing error Document does not contain selectable items.
Please help to resolve the same.Hi,
1) this should be posted in MM forum, not here
2) let the person go to MIGO , to menu Settings, click Default Values and check checkbox "Propose All Items"
3) I guess if it is STO it would need goods issue first happening in source plant so that GR can happen in receiving plant (so first create Outbound Delivery in source plant, post goods issue against it and then do the GR with 101 against this delivery or PO itself)
Regards,
Tomek -
PO does not contain selectable item
Dear All,
I have created PO(ME21N) and also released(ME29N) but while doing GR(MIGO) the error comes"PO does not contain selectable item".
Please explain why error is coming where as i have filled all the mandatory data??
Thanks and Regards,
BaijuWhile doing the GRN against the PO, if you are getting the error message u201CPO doesnu2019t contain any selectable itemsu201D, following may be reasons:-
1.PO may not be released.
2.The confirmation control tab may be blank, in that case selects the relevant key. If you are preparing the GRN against inbound delivery then select the confirmation control as inbound and prepare inbound delivery using VL31N.
3.If through rough GRN then prepare Rough GRN using VL41 and proceed.
4.If the delivery completion flag under delivery tab is set, then also you will get the same error message. In that case, uncheck the delivery completion flag and proceed.
Still issue persist, revert back. -
GR of Process order - Document does not contain selectable items
Hi Guru's,
While doing GR for process order, user is not able to do the GR because of the below message:
Document XXXXXX does not contain selectable items
The other user is able to do the GR. The status of process order is
REL PCNF PRC EXPL EXTS GMPS MANC PDLV. There is overdelivery tolerance so, the delivered quantity is more than ordered qty.
There is no auto GR setting, no COGI errors, no final delivery indicator, no authorisation issue.
What could be the reason for this ?
Thanks in advance.
Regards
KalyanHi Dee Joy,
I am using MIGO for posting the GR. So, kinldy let me know what setting in MIGO needs to be done.
Regards
Kalyan
Maybe you are looking for
-
I originally had over 900 unread emails on my ipad because I had been using my PC for all emails for quite some time. Meantime, because the two are synced, over 900 had been accruing on my ipad. I managed to delete and send to trash all but the 574.
-
Is there a way to change the output type for Email Remittance Program?
Hello, We are trying to implement Separate Remittance Program.The seeded output type is PDF( I have checked the output type for send separate remittance concurrent program) however the email which we receive looks like a regular email I mean with a n
-
I have a SLA report and i want to have SLA report based on certain time limits. Consider the situation Report is showing user to prompt the time limit say 10-07-2010 to 12-07-2010.so that user can get the sla report within the time.In the data object
-
Cannot Enter more than 1000 partners in Customer master data(Partner Funct)
Dear Friends, In Customer Master Data -> Sales Area Data -> Partner Functions-> I can able to enter 1000 partners. Now When I am trying to enter more than 1000 partners, system is not allowing me(no lines are available to enter partner) According to
-
Kotoeri (japanese input system) does not allow input
I've been using Kotoeri to type in Japanese and it's been working just fine until recently. Now when I select Kotoeri and tried to type, the cursor disappears and what I type does not appear on the screen. If I type ten letters, one or two of those l