Selection from a Slice

Is there a way to create a selection from a slice in CS5?

I guess one way short of possibly using a script is to use the Rectangular Marquee Tool and draw that out on the slice.
If you View>Snap enabled the marquee should snap to the slice.
Or to make a new layer from the slice, you can select the slice with the slice selection tool, Edit>Copy and then Edit>Paste or Edit>Paste Special>Paste in Place.

Similar Messages

How do I link to a table from a slice of a pie chart?

My project manager is after me to add a feature to a pie chart built on one of my tables. The code that selects from the table for the pie chart is this:
select 'http://apexdevapp1.ci.raleigh.nc.us:7777',activity_type,count(ID) total FROM eba_ver2_cust_activity
where ACTIVITY_DATE BETWEEN NVL(TRIM(:P23_START_DATE), '01-JAN-2001') AND NVL(TRIM(:P23_END_DATE),
'31-DEC-2099')
group by activity_type,'http://apexdevapp1.ci.raleigh.nc.us:7777';
She wants to be able to click on a slice of the pie ("activity_type") and link to another page showing a report limited to that activity_type, selected from the same table. I know how to link from one interactive report to another, but I don't know how to do it from a slice of a pie chart. Does anybody know how?
I'd appreciate some guidance on this.
Steve the n00b in Raleigh NC

Denes Kubicek wrote:
Have you compared that link with any of your apex application links in the browser? ;) :)
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------I may be missing the point of your question, Denes, but all my links are implemented from the Link Column section under Report Attributes. They are not mentioned anywhere in the Select statement, unlike yours.
Steve "the n00b" in Raleigh NC

Determine the last date of visit before FY selected in the slicer

Hi,
I have data for date wise clients visits. My objective is to determine the last date of visit to the client before the FY selected in the slicer.
The objective, data layout and question is available in this file
http://sdrv.ms/19RnW0A
Please help with the appropriate PowerPivot calculated Filed formula.
Thank you.
Regards, Ashish Mathur Microsoft Excel MVP www.ashishmathur.com

Hi, basically this calculation would solve your initial question, though, it does not match the requested results:
LastVisit:=CALCULATE(MAX(Data[Date]), DATESBETWEEN(Calendar[Date], BLANK(), MIN(Calendar[Date])-1))
its important to add that this calculation only works if you mark your Calendar-table as Date-table which was not the
case in the sample workbook!
assuming you select 2012-2013, then according to your Calendar-table you select dates from 31/12/2012 till 30/12/2013
so the "last date of visit to the client before the FY selected in the slicer." would be the last visit before
31/12/2012 which would be 12/12/2012 for Client A and not 25/02/2012 as expected result
hth,
gerhard
Gerhard Brueckl
blogging @ http://blog.gbrueckl.at
working @ http://www.pmOne.com
Gerhard's approach is a nice clean solution.
The only thing I would add is that we could use LASTDATE and FIRSTDATE instead of the MIN/MAX functions:
LastVisit:=
CALCULATE(
LASTDATE(Data[Date]),
DATESBETWEEN(
Calendar[Date],
BLANK(),
FIRSTDATE(Calendar[Date]) -1)
In order to achieve the overall outcome described in the uploaded Excel workbook, changes to the how the [Financial Year] and [Financial Year Key] are calculated will also need to be made (so that the slicer filters the correct data ranges).
This can be done by using the suggested calculated column changes above or something similar.
Having reviewed the requirement again, the logic behind the [Last Visit Last Year] measure that I proposed is slightly different from what is required because it only looks at the last visit date
within the previous financial year to the one currently selected in the slicer. On the other hand Gerhard's is looking for the last visit date
any time before the first date in the selected financial year and this is more in-line with the actual requirement. With the provided dataset, both approaches provide the same outcome, but the difference
in behaviour would become apparent if the last visit date was not found within the previous financial year to the one selected in slicer.

Selection from a Maintenance View

Hi,
I have to fetch data from a view, unfotunately that view is a mainteance view. Is there any other way to select/fetch data from that view in my report program ?
Regards,
Bharath Mohan B

Hi
U cannot access the data from maintanence view.
Only projection and database view can be used in ABAP code.
If u want to access the Data from more the one table , Create the DATABASE VIEW and use this view in ur program.
For example : UR Database view name is Ztest
in ur program
table Ztest.
select * from Ztest ***************
*******************UR Business Logic
<b>Reward if useful</b>

URGENT : select from table statement in ABAP OO

Hi all,
I am an absolute ABAP OO beginner and need some quick help from an expert. How can I make a selection from an existing table (eg MARA) in an BADI which is programmed according to ABAP OO principles.
In the old ABAP school you could make a TABLES statement at the beginning and the do a SELECT¨* FROM but this does not work in ABAP OO.
How should i define such simple selections from existing tables. Anyone ?
Thanks a lot,
Eric Hassenberg

*define internal table
data: i_mara like standard table of mara.
*select to this table
select * from mara into table i_mara.
Also you have to define work area for this internal table in order to use it.
data:w_mara like line of i_mara.

Select from v$sql_plan in a procedure

Hi
I''m attempting to save plans (from V$SQL_PLAN) into a table using a procedure in schema APPS, but keep getting missing table error,
PL/SQL: ORA-00942: table or view does not existI then granted an explicit SELECT to APPS on the V$SQL_PLAN table from a schema with
a DBA role, but still get the same error when compiling the procedure.
SQL> create table gl_imp_post_plans as ( select * from v$sql_plan where rownum < 1);
Table created.
SQL> select count(*) from v$sql_plan;
COUNT(*)
     13506
SQL> create or replace procedure Ins_Plan_from_Dictionary as
2
3    begin
4      insert into GL_Imp_Post_Plans
5      select sqo.*
6      from    v$sql_plan sqo
7      where (sqo.sql_id) not in (select distinct gipi.SQL_ID
8                                  from   GL_Imp_Post_Plans gipi)
9      and    (sqo.sql_id) in     (select distinct
10                                         sqi.sql_id
11                                  from   v$sql_plan sqi
12                                  where sqi.object_owner = 'APPS'
13                                  and    sqi.object_name in ('GL_BALANCES','GL_DAILY_BALANCES','GL_JE_LINES') );
14      commit;
15
16
17      exception
18        when others then
19          rollback;
20 --        sysao_util.Message ('O', 'Error ' || sqlerrm);
21
22 end Ins_Plan_from_Dictionary;
23 /
Warning: Procedure created with compilation errors.
SQL> show err
Errors for PROCEDURE INS_PLAN_FROM_DICTIONARY:
LINE/COL ERROR
4/5      PL/SQL: SQL Statement ignored
11/40    PL/SQL: ORA-00942: table or view does not exist
SQL>
SQL> l 11
11*                                 from   v$sql_plan sqiThe same error occurs when I attempt to select from GV$SQL_PLAN or DBA_HIST_SQL_PLAN.
Could anybody suggest how I can persist the rows into a table using a procedure?
thanks

thanks, yes this works:
create or replace procedure Ins_Plan_from_Dictionary as
begin
    execute immediate 'begin
                        insert into GL_Imp_Post_Plans
                        select sqo.*
                        from    v$sql_plan sqo
                        where (sqo.sql_id) not in (select distinct gipi.SQL_ID
                                                    from   GL_Imp_Post_Plans gipi)
                        and    (sqo.sql_id) in     (select distinct
                                                           sqi.sql_id
                                                    from   v$sql_plan sqi
                                                    where sqi.object_owner = ''APPS''
                                                    and    sqi.object_name in (''GL_BALANCES'',''GL_DAILY_BALANCES'',''GL_JE_LINES'') );
                        commit;
                       end;';
    exception
      when others then
        rollback;
--        sysao_util.Message ('O', 'Error ' || sqlerrm);
end Ins_Plan_from_Dictionary;
/

Can not select from v$mttr_target_advice

Hello
When i try to select from the view it never comes back and is a problem for the mmon process. Anyone have any ideas.

Could you pleasse post the error message and the version you are using?
Best Regards
Krystian Zieja / mob

Can not select from my own MV. Please help.

Hello Gurus,
I have created a MV with following clauses
CREATE or REPLACE MATERIALIZED VIEW "OWNER_NAME1"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2 .... from table1,table2
where .....
I have logged in to DB with the 'owner_name1' schema itself which is the owner of the MV.
But, when I try to select from the above MV. It gives error "Ora-00942 table or view does not exist"
I can see the same under 'user_objects' view as an object of owner_name1 schema.
Could you please help me in understanding where I have gone wrong?
DB - Oracle 9i on unix platform.
Thanks in advance!
Abhijit.

Oh! I missed to mention the exact steps followed by me which created error for me,
viz.
1) I have 2 Database and their users as follows
bq. i) DB1 in local server - 'localUser'
bq. ii) DB2 in remote server - 'RemoteUser1' and 'RemoteUser2'
2) 'RemoteUser2' user in DB2 has 'select' privilage on table 'RemoteTable1' of 'RemoteUser1' ( both are remote DB's users ! )
i.e. select * from RemoteUser1.RemoteTable1; --works okay when logged into RemoteUser2. no synonyms are created hence using schema_name.table_name convention.
3) Logged in to 'localUser' in DB1.
4) Created a DB link 'local_to_remote2' in 'localUser' schema ( in DB1) to 'RemoteUser2' schema (in DB2)
i.e.
create database link local_to_remote2 connect to RemoteUser2 identified by password using 'connection_string';
DBLink was created successfully.
5) I could select from the tables of 'RemoteUser2' using DB Link. (by logging in to 'localUser')
i.e. select * from RemoteUser1.RemoteTable1@local_to_remote2 ; --- gives me expected output. no issues!
6) Now, I created below MV in 'localUser' ( no need to tell in 'DB1' )
the exact syntax I used is as follows,
CREATE or REPLACE MATERIALIZED VIEW "localUser"."MV_Name1"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE
AS
SELECT column1, column2
From RemoteUser1.RemoteTable1@local_to_remote2
where condition1
and condition2;
The MV was created successfully, and I could see it as an 'Valid' object of 'localUser' schema.
i.e. select * from user_objects where object_name ='MV_NAME1' and status ='VALID' --- tells that above create MV is an object of owner 'localUser'
But, when I try to select from the said MV. it gives me error "Ora-00942 table or view does not exist"
i.e. select * from MV_Name1; ---- neither this
select * from localUser.MV_Name1; ---- nor this works :(
Even when I try to drop the same MV it gives me same error. :(
Could you please suggest me anything so that I will be able to select from MY OWN MV ?
Please help Gurus.

Can not select from SAPTOOLS.DB6PMCF

We use third-party tool to monitor our SAP systems. We receive an error
Can not select from SAPTOOLS.DB6PMCF
when we monitor DB2 database.
Function DB6PMCF is registered in SAPSID schema. Can I register it also in SAPTOOLS schema? What is a correct procedure for this?

Hi Milan,
I think you have to issue the following command for the affected user.
db2 "grant execute on function saptools.db6pmcf to <user>"
regards, Javier Rocha

Can't select from view even though it appears in ALL_VIEWS

Oracle's documentation states that all_views "describes the views accessible to the user":
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/statviews_2117.htm
DBA_OBJECTS appears in the ALL_VIEWS, yet I get a "table or view does not exist" error when I try to select from it.
Any thoughts on why this is happening?
SQL> SELECT COUNT(1)
FROM all_views
WHERE owner = 'SYS'
AND view_name = 'DBA_OBJECTS'
COUNT(1)
         1
1 row selected.
SQL> SELECT *
FROM sys.dba_objects
SELECT *
FROM sys.dba_objects
Error at line 2
ORA-00942: table or view does not exist

That's not standard behaviour:
DBA >create user u1 identified by u1;
Utente creato.
DBA >grant connect to u1;
Concessione riuscita.
DBA >conn u1/u1
Connesso.
DBA >select count(0) from all_views;
COUNT(0)
       856
DBA >select view_name from all_views
2 where view_name like 'DBA%'
3 or view_name like 'V$%';
VIEW_NAME
DBA_PROCEDURES
DBA_PUBLISHED_COLUMNS
V$OBJECT_USAGE
DBA >select 'select count(*) from '||owner||'.'||view_name||';'
2 from all_views
3 where view_name like 'DBA%'
4 or view_name like 'V$%';
'SELECTCOUNT(*)FROM'||OWNER||'.'||VIEW_NAME||';'
select count(*) from SYS.DBA_PROCEDURES;
select count(*) from SYS.DBA_PUBLISHED_COLUMNS;
select count(*) from SYS.V$OBJECT_USAGE;
DBA >select count(*) from SYS.DBA_PROCEDURES;
COUNT(*)
      6793
DBA >select count(*) from SYS.DBA_PUBLISHED_COLUMNS;
COUNT(*)
         0
DBA >select count(*) from SYS.V$OBJECT_USAGE;
COUNT(*)
         0All the DBA* or V$ visible are also accessible, DBA_OBJECTS is not present in ALL_VIEWS.
There's something strange on your user's priviledges...
Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/01/02/query-gerarchiche/]

Can I Select from table skipping extents linked with lost datafiles?

Hi~,
I need your help to recover my database.
I'm using oracle 9.2.0.8 at Fedora 3 with no-archive mode.
and I don't have any backup.
Last night, I experenced hard disk failure.
I tried OS-level recovery, but I lost some datafiles of tablespace.
anyway, I wanted to recover my database without data of lost datafiles.
so, I issued "alter database datafile offline drop" and
start oracle instance.
But, datafiles were not removed from dba_data_files view and
extents linked with lost datafiles were not removed from dba_extents view!
Selecting query of some table containing extents linked with lost data files,
I got "ORA-00376: file xxx cannot be read at this time" message.
So, my question is that..
HOW CAN I SELECT FROM THAT TABLE WITHOUT SCANNING EXTENTS LINKED WITH LOST DATA FILES?
Thanks.

Hi,
Without being in archivelog and without backup, one can't do any sort of recovery. That's why backups and archivelog are so so important.
The offline data file command never does actually drop the datafile. It merely indicates to the control file that now the said tablespace will also be dropped. This won't update any view that the files are not supposed to be used or shown to you anymore.
This is what documentation says about the recovery of the database in the NoARch mode,
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osrecov.htm#i1007937
You do need a backup in order to get those tables being read. Oracle doesn't have any feature which can offline/skip the missing extents for you and let you read the data without them.
HTH
Aman....

Select from .. as of - using archived redo logs - 10g

Hi,
I was under the impression I could issue a "Select from .. as of" statement back in time if I have the archived redo logs.
I've been searching for a while and cant find an answer.
My undo_management=AUTO, database is 10.2.0.1, the retention is the default of 900 seconds as I've never changed it.
I want to query a table as of 24 hours ago so I have all the archived redo logs from the last 48 hours in the correct directory
When is issue the following query
select * from supplier_codes AS OF TIMESTAMP
TO_TIMESTAMP('2009-08-11 10:01:00', 'YYYY-MM-DD HH24:MI:SS')
I get a snapshot to old ORA-01555 error. I guess that is because my retention is only 900 seconds but I thought the database should query the archive redo logs or have I got that totally wrong?!
My undo tablespace is set to AUTOEXTEND ON and MAXSIZE UNLIMITED so there should be no space issues
Any help would be greatly appreciated!
Thanks
Robert

If you want to go back 24 hours, you need to undo the changes...
See e.g. the app dev guide - fundamentals, chapter on Flashback features: [doc search|http://www.oracle.com/pls/db102/ranked?word=flashback&remark=federated_search].

How to select from list of values?

Dear All,
I am using XML publisher for word, where I need to select a value from a list of values, for example I have hotel code like TTAG,TOBBR,TTAG,TOTM now I need
to select hotel code and the corrosponding data should be display on word after
running the RTF. Tell me, how can I achive the same?
hare krishna
Alok

Thanks prety much,I am using XML to upload data from there into RTF templete. I've already insert table through load data option, but my problem is, how could I select a value from a list of values and based on that value selected from the list, it should displaydata corrosping to it. For example, I have few codes like TTAG, AMAG, TOTOM and if I select TOTM, it should display the complete address of that hotel named TOTM. If above given scenario is not at all possible, then Is there any alternate method to achieve this?
hare krishna
Alok

How to select from a stored procedure?

Lets say I have a simple stored procedures
Create Procedure stp_test
As
Begin
Select * from tbl1
End
Go
I would like to be able to do this in SSMS (actually, I want to do this from ADODB)
Select top 10 * from ...stp_test... Order By rowID
It looks like I want to use OpenQuery on the stored Procedure, but I have not been able to do it correctly. How can I query my stored procedure?
Rich P

It looks like I want to use OpenQuery on the stored Procedure, but I have not been able to do it correctly. How can I query my stored procedure?
If you want to use the OPENQUERY method , use the following.. follow this link...
http://stackoverflow.com/questions/209383/select-columns-from-result-set-of-stored-procedure
Please mark as answer, if this has helped you solve the issue.
Good Luck :) visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

F4IF_INT_TABLE_VALUE_REQUEST - what line was selected from list displayed

I am building an internal table and displaying it as search help using F4IF_INT_TABLE_VALUE_REQUEST. How can I tell what line was selected from the search help? Only one field is filled with the selection, but there are several other fields attached to this that I need in my program - but I can't tell which line was selected, and the one field is not enough information to use to get the record from the internal table.

Hi,
RETURN_TAB would have the selected values.
FIELD_TAB will have the hit list fields.
DYNPFLD_MAPPING will have the Assignment of the screen fields to the internal table.
Regards,

Selection from a Slice

Similar Messages

Maybe you are looking for