Selection from BSEG table

Hi all
In one of my program i have to use selection from BSEG by using non key fields like anln1, hkont etc.
My program run time taking too much time i.e 1.5 to 2hrs
Is there any criteria to reduce my run time.
plz help
thks
sateesh

Hi
If you need a select by field hkont (so G/L account) use the table BSIS (open item) and BSAS (cleared item) instead of BSEG, just Eric said.
SELECT * FROM BSAS WHERE BUKRS = BUKRS
                                          AND HKONT = HKONT.
   SELECT SINGLE * FROM BSEG WHERE BUKRS = BSAS-BUKRS
                                                          AND BELNR = BSAS-BELNR
                                                          AND GJAHR = BSAS-GJAHR
                                                          AND BUZEI = BSAS-BUZEI.
         SELECT SINGLE * FROM BKPF WHERE BUKRS = BSAS-BUKRS
                                                               AND BELNR = BSAS-BELNR
                                                               AND GJAHR = BSAS-GJAH.
Max
Edited by: max bianchi on Nov 5, 2008 11:03 AM

Similar Messages

Data fetching from BSEG table

Hi,
I have used smartforms for generating suppler payment statement for financial department. more time duration is taken by the program when it is generating.
I think this problem comes while data fetching from BSEG table. because, it has more records for one vendor ID.
I want reduce this time duration.
Please guide me.

Have you tried this selection in se16? I'm quite sure that It will take
a long time.
The problem has been explained in this group before and I think you
should search for bseg in the answers given.
As a hint: It has to do with the selection universe. You are restricting
only bukrs from the primary key (all the other restrictions in your
where clause are filters that are applied on SAP's side (not on the
database side)). The problem is that bseg isn't stored as separated
fields in the RDBMS, but as a table with the primary key and a stream of
bits in a raw field.
You should review and change the logic you're using before reading bseg.
It's the only way you'll improve the performance of this select. (for
example, you could use one or more secondary index tables - bi or ba
to retrieve belnr and access bseg with a better where clause).

Reading data from BSEG table with Non-key fields in where clause

Hi All,
    I have to read data from BSEG table based on WBS element field (PROJK). As I'm not passing key fields to WHERE clause system couldnt run the select statement. Since BSEG is a cluster table I cant even create secondary index on PROJK field.
   Could you please tell me, how to improve its performance.
Regards
Jaker.

SELECT bukrs
             belnr
             gjahr
             shkzg
             dmbtr
             hkont
             lifnr
             matnr
             werks
             menge
             meins
             ebeln
        FROM bseg
        INTO TABLE it_bseg
        PACKAGE SIZE 10
        FOR ALL ENTRIES IN it_final
        WHERE bukrs EQ it_final-bukrs
           AND belnr EQ it_final-belnr
           AND gjahr EQ it_final-gjahr
           AND buzei EQ it_final-buzei
           AND hkont EQ it_final-hkont
           AND werks IN s_werks.
By using package and fetch from BSEG table. gathering all other information to a final internal table.This will reduce the hit to database.And also try to put that data in hashed internal table which is it_bseg....then definetly improve the performance.
<REMOVED BY MODERATOR>
Dara.
Edited by: Alvaro Tejada Galindo on Apr 21, 2008 12:47 PM

Select From BSEG

Hi
The below mentioned piece of code is throwing a dump in Production system.
Is there any way of alternate selection.
IF NOT it_pos[] IS INITIAL.
    SELECT * FROM bseg INTO
             TABLE it_bseg
             FOR ALL ENTRIES IN it_pos
                 WHERE bukrs IN dd_bukrs
                 AND    belnr = it_pos-belnr
                 AND    gjahr = it_pos-gjahr.
ENDIF.
Regards
Subin.S

I think you need to post a few more details of the environment and error to assist people in offering solution.
Questions I think of are:
- What type of dump are you getting? - Out of Time? Out of Memory? Other?
- How many entries are in internal table it_pos[] before the BSEG select starts?
- How many entries are in BSEG approximately?
- Do you need all the BSEG records to be selected into an internal table at once or can you process them in smaller sets?
- Do you have a number of other large internal tables in your program? Can any of these be cleared to free up memory?
- can you run SQL trace (ST05) against the program to see the execution time for each fetch from BSEG and how many records each fetch returns?
- why are you doing two selects from BSEG? What is the difference between them? normally better to get all the fields at the same time instead of selecting twice.
- in Development or Test where there is less data, does tha program run OK? If so, can you run it in SE30 to see what that transaction highlights as performance or similar issues?
- what table or tables do you fill table it_pos[] from? are there any duplicate records in this internal table?
- what SAP version are you running? 32 bit or 64 bit? What database?
To solve an issue like this with a program these and probably dozens of other questions must be asked and answered - and as the person on the site you are the only one able to get the answers.
Posting more details will help forum readers to evaluate the issue in light of their experience and to provide further suggestions. The more information you can give - the more likely that someone will be able to answer.
thanks
Andrew

Selecting from bseg

Abap Gurus,
I am fetching belnr dmbtr buzei hkont from bseg
for all entries from one table say 'TAB'
where hkont = TAB-hkont
and koart = 'S'.
but in in the code inspector check it;s showing error
The message is
"Large table BSEG: No field of a table index in WHERE"
How to optimize a fetch from a larger cluster table BSEG
rewards if useful.
Thanks in advance

Hi,
     Alternatives to Reading BSEG (Accounting Document Segment).
Since performance is an issue if reading data from BSEG table ( being a cluster table ), maybe you would
consider using the tables:
          BSAD      Accounting     : Secondary Index for Customers (Cleared Items)
          BSAK      Accounting     : Secondary Index for Vendors (Cleared Items)
          BSAS      Accounting     : Secondary Index for G/L Accounts (Cleared Items)
          BSID      Accounting     : Secondary Index for Customers
          BSIK      Accounting     : Secondary Index for Vendors
          BSIS      Accounting     : Secondary Index for G/L Accounts
          instead of BSEG.
          It depends on what your program has to select (if you're only looking for customers
          you can use BSID and BSAD etc.)
          These are normal database tables, not clusters. Normally every record from BSEG
          can be found back in one of these 6 tables and a program which selects data from
          these tables runs faster than from BSEG.
Reward points if helpful
Thanks
Shambhu

Data Retrival from BSEG Table

Hi,
Can any one tell me how to retrive the partial payment accounting documents from BSEG table as I
Can't use REBZG field of BSEG which is not a primary key ?
Regards,
Krishnam Raju

Hi
U need to get all payments and check if they are partial payment.
I don't know which kind of items (vendor or customer) u need to control, but if u need to check the customer payments:
- A) Select the payments from cleared items (BSAK table)
- B) Check if the field REBZG is filled
Max

How to populate a table based on a row selection from another table.

Hi, i just started to use ADF BC and Faces. Could some one help me or point me a solution on the following scenario .
By using a search component , a table is being displayed as a search result. If i select any row in the resulted table , i need to populate an another table at the bottom of the same page from another view. These two tables are related by primary key . May i know how to populate a table based on a row selection from another table. Thanks
ganesh

I understand your requirement and the tutorial doesn't talk about Association between the views so that you can create a Master-Detail or in DB parlance, a Parent-Child relationship.
I will assume that we are dealing with two entities here: Department and Employees where a particular Department has many Employees and hence a Parent-Child relationship.
Firstly, you need to create an Association between the two Entities - Department and Employees. You can do that by right clicking on the model's entity and then associating the two entities with the appropriate key say, DepartmentId.
Once you have done that, you need to link the two entities in the View section with this Association that you created. Then go to AppModule and make sure that in the Available View Objects: 'EmployeesView' appears under 'DepartmentView' as "EmployeesView via <link you created>". Shuttle the 'DepartmentView' to the right, Data Model and then shuttle
"EmployeesView via <link you created>" to the right, Data Model under 'DepartmentView'.
This will then be reflected in your Data Controls. After that, you simply would have to drag this View into your page as a Master-Detail form...and then when you run this page, any row selected in the Master table, would display the data in the Detail table.
Also, refer to this link: [Master-Detail|http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html]
Hope this helps.

How to do a SELECT from different tables into an internal table?

How to do a SELECT from different tables into an internal table?
I want to select data from MARA, MARC and ZPERSON and populate my ITAB_FINAL
REPORT zinternal_table.
TABLES:
mara,
marc,
zperson.
TYPES:
BEGIN OF str_table1,
v_name LIKE zperson-zname,
v_matnr LIKE marc-matnr,
v_emarc LIKE marc-emarc,
v_werks_d LIKE marc-werks_d,
v_dstat LIKE marc-dstat,
END OF str_table,
i_table1 TYPE STANDARD TABLE OF str_table1.
DATA:
BEGIN OF str_table2,
v_mandt LIKE mara-mandt,
v_ernam LIKE mara-ernam,
v_laeda LIKE mara-laeda,
END OF str_table2,
itab_final LIKE STANDARD TABLE OF str_table2.

first find the link between mara , marc and zperson , if u have link to 3 tables then u can jus write a join and populate the table u want ( thats final table with all the fields).
u defenitely have alink between mara and marc so join them and retrieve all data into one internal table.
then for all the entries in that internal table retrieve data from zperson into another internal table.
then loop at one internal table
read another internal table where key equals in both the tables.
finally assign fileds if sy-subrc = 0.
gs_finaltable-matnr = gs_table-matnr
etc...
and finally append gs_finaltable to gt_finaltable.
there u go ur final table has all the data u want.
regards
Edited by: BrightSide on Apr 2, 2009 3:49 PM

Select from nested table in a nested table security problem

please help
running Oracle 9.2.0.3.0 on RH AS 2.1
I can select the inner most nested table as the creator, but can't use the same select statement as USER2.
ORA-00942: table or view does not exist
-- begin make of objects and tables
create or replace type mydata_t as object ( x float, y float);
create or replace type mydata_tab_t as table of mydata_t;
create or replace type mid_t as object (
     graphname varchar2(12),
     datapoints mydata_tab_t );
create or replace type mid_tab_t as table of mid_t;
create or replace type top_t as object (
     someinfo int,
     more_mid     mid_tab_t );
create table xyz (
     xyzPK int,
     mainstuff     top_t )
     nested table mainstuff.more_mid store as mid_nt_tab
          (nested table datapoints store as mydata_nt_tab)
-- grants
grant all on mydata_t to user2;
grant all on mydata_tab_t to user2;
grant all on mid_t to user2;
grant all on mid_tab_t to user2;
grant all on top_t to user2;
grant all on xyz to user2;
-- insert
insert into xyz values (1, top_t(22,mid_tab_t(mid_t('line1',mydata_tab_t(
mydata_t(0,0),
mydata_t(15,15),
mydata_t(30,30))))));
commit;
-- select fails as user2
select * from table(select Y.datapoints as DP_TAB
     from table(select X.mainstuff.more_mid as MORE_TAB
          from scott.xyz X
          where X.xyzPK=1) Y
     where Y.graphname='line1') Z;
-- select works as user2, but i need individual lines
select Y.datapoints as DP_TAB
     from table(select X.mainstuff.more_mid as MORE_TAB
          from scott.xyz X
          where X.xyzPK=1) Y
     where Y.graphname='line1';

Thank you for your reply.
I have tried
select value(t) from table t;
but it is still not working. I got almost the same answer as before.
Anyway thank you very much again.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by MARCELO OCHOA ([email protected]):
Originally posted by meimei wu ([email protected]):
[b]I created a nested object-relational table using REF type in oracle8i. when I tried to select * from the table, I got lots of number as the ref type values, but actually, the value in ref type should be of type varchar2 and number. The number I got looked like following code:
JARTICLE_REF_TYPE(000022020876108427C2FE0D00E0340800208FD71F76103B99B12009C0E0340800208FD71F,
Does anyone know how I can get the actual value that I inserted into the nested table?
your help is appreciated.<HR></BLOCKQUOTE>
Try this:
select value(t) from table t;
Best regards, Marcelo.
null

How to avoid ORA-3113 when selecting from XMLTYPE table

Hi,
If I register an XML-schema, Oracle automatically creates a table xxxxxx_tab of XMLTYPE. (I use Oracle 9.2.0.1)
When I do a DESCRIBE or a SELECT from this table I get the error: 'ORA-03113:
end-of-file on communication channel' and my connection is dropped.
I opened a TAR for this and Oracle says: 'It is an internal bug so cannot be viewed in metalink. This is fixed in release 10i.' (do they mean oracle DB rel 10i, or a new version of XDK?)
I saw an example in Oracle Magazine (Jan
2003) "Make XML Native and Relative" about Oracle 9i Rel 2 and XML. As you can see in codeListing 7, the author also does a select from such a
table (CD331_tab): Why doesn't he have any problems?
Is there a workaround for this bug? What's the purpose of being able to automatically upload XML-data to a registered schema if you can't do a select of the data?
Thank you!

It appears that the XML Schema is not entirely valid. Specifically, the definition of element "DeviceCategory" has two definitions of element "Audio" appearing within a <choice> model i.e. something like :
<element name="DeviceCategory">
<choice>
<sequence>
<element name="Audio">
</sequence>
<sequence>
<element name="Audio">
</sequence>
</choice>
This is disallowed by XML Schema spec per. the Unique Particle Attribution Constraint. The general idea is that a XML Schema describes a determinstic content model i.e. schema processor can always unambiguosly determine the matching declaration when it encounters an element. However that's not the case with the declaration above. On encoutering "Audio", it could match either the first or the second declaration of the element. Hence the error.
You will have to rework the schema to avoid this constraint. One mechanism could be to define complexType and their restrictions.
- Ravi

Select from a table from other schema

Hi,
I want to make a select from a table how is into other Schema and into other instance.
form example, if I have _2 schemas (in diferent instances)_:
SCHEMA1 =
*(DESCRIPTION =*
*(ADDRESS =*
*(PROTOCOL = TCP)*
*(HOST = XXX.XXX.XXX.XX1)*
*(PORT = 1560)*
*(CONNECT_DATA =*
*(SERVER = DEDICATED)*
*(SERVICE_NAME = SCHEMA1)*
SCHEMA2 =
*(DESCRIPTION =*
*(ADDRESS =*
*(PROTOCOL = TCP)*
*(HOST = XXX.XXX.XXX.XX2)*
*(PORT = 1560)*
*(CONNECT_DATA =*
*(SERVER = DEDICATED)*
*(SERVICE_NAME = SCHEMA2)*
and into SCHEMA2 there is a table TABLE_A.
If I`m connected into SCHEMA1:
how can I do to make a select from the TABLE_A?
thanks very much.

1) Referring to an entry in the tnsnames.ora file as a "schema" as you have here with schema1 and schema2 is likely to be confusing. You have multiple schemas in the same database-- in this case, you appear to be trying to query tables in a different database. If we try to answer using your TNS aliases "schema1" and "schema2", there is likely to be a great deal of confusion between schemas/ databases/ and TNS aliases. So I will assume that your tnsnames.ora file actually reads
TNS_ALIAS1 =
(DESCRIPTION =
    (ADDRESS =
      (PROTOCOL = TCP)
      (HOST = HOST1)
      (PORT = 1560)
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DB1)
TNS_ALIAS2 =
(DESCRIPTION =
    (ADDRESS =
      (PROTOCOL = TCP)
      (HOST = HOST2)
      (PORT = 1560)
(CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = DB2)
)2) Given the TNS aliases above, assuming that we are talking about the tnsnames.ora file on HOST1, you would need to create a database link from DB1 to DB2. You can either specify a fixed username and password for the database link or you can specify that the connection happens as the current user (which assumes that the passwords are synchronized between the databases).
CREATE DATABASE LINK to_db2
CONNECT TO username_on_db2
IDENTIFIED BY password_on_db2
USING 'TNS_ALIAS2'3) Assuming the database link is in place
SELECT *
FROM schema2.table_name@to_db2Justin

Select from two tables and insert into a third

I'm trying to do a select from two tables and do an insert into a third table from the two resulting columns.
I have the following....
DECLARE
tempsid number;
temphostid number;
BEGIN
select "DBSID_ID","ID" into tempsid,temphostid from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" ("SIDLOOKUP_ID", "SERVERLOOKUP_ID")
values(tempsid, temphostsid);
END;
run;
I get the error ....
ORA-06550: line 11, column 18:
PL/SQL: ORA-00984: column not allowed here
ORA-06550: line 10, column 1:
PL/SQL: SQL Statement ignored
1. DECLARE
2. tempsid number;
3. temphostid number;

okay ... I tried a different way ...
DECLARE
a number;
b number;
BEGIN
select "DBSID_ID","ID" into a,b from "DBSIDS","SERVERS"
where "HOST_SID" like '%'||"DBSID_NAME"||'%'
and "HOST_NAME" not like 'vio%'
and exists (select "DBSID_NAME" from DBSIDS)
order by "DBSID_NAME";
insert into "DBSID_LOOKUP" (SIDLOOKUP_ID, SERVERLOOKUP_ID) values (a, b);
END;
and now it whines about ...
ORA-01422: exact fetch returns more than requested number of rows

XML parsing failed while select from my table with criteria

While select from my table an error displayed as
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00601: Invalid token in: '/<XML Path>/row[c24="SA0010001"]'
select * from category
where existsNode(xmlrecord, '/<XML Path>/row[c24="SA0010001"]') = 1;
xmlrecord
<row id="52843" xml:space="preserve">
<c1>Refund of Domestic Payment Order</c1>
<c2>Ref Dom Py Or</c2>
<c3>PLsql</c3>
<c20>1</c20>
<c21>62_TAABSINPUTT___OFS_TAABS</c21>
<c22>0803181605</c22>
<c23>62_TAABSINPUTT_OFS_TAABS</c23>
<c24>SA0010001</c24>
<c25>1</c25>
</row>

Hi,
Did you copy that sample from some demo?
The part "<XML Path>" is meant to be replaced by a real XPath fragment.
Here, I think you may just want this :
select * from category
where existsNode(xmlrecord, '/row[c24="SA0010001"]') = 1;Edit : OK, just seen your previous post and the example given
Edited by: odie_63 on 6 juil. 2010 21:16

Selecting from two tables and confirming from them despites they not relate

Please I need a query to select from two tables that are not related to each other.
I also want to confirm data's as in verify wether what the user has entered is in accordance with what is in the tables
Examples
the first table is named "Card" and the second table is named "Student_Details"
Card table contains a column named "Pin_Number".
The Student_Details table contains fields such as Exam_Number, Name, Age, Sex.
The user has to Enter the Pin_Number which has to be confirmed in the Card table and Exam_Number which has to be confirmed in the Student_Details table and verify that both data's are correct.
Please I need the SQL and PL/SQL queries for this problem.
Thanks

Hi,
I think you need two different queries
You can write a procedure like:
create or replace procedure p1 (p_pin_number number, p_exam_number)
is
r_card_row            card%rowtype;
r_student_details     student_details%rowtype;
cursor c1 is
select *
    from card
   where pin_number = p_pin_number;
cursor c2 is
select *
    from student_details
   where exam_number = p_exam_number;
begin
open c1;
    loop
      fetch c1 into r_card_row;
      exit when c1%notfound;
      .... do whatever you want..... and the samething you can do with other cursor
    end loop;
close c1;
end p1;Hope this helps
Ghulam

Selecting from two tables but making it just one selection

Is there a way to select from two tables and just have one selection appear?
Specifically I have a fact_install_unit, and a fact_install_arch table.
Sometimes the value exists in fact_install_unit.factory_timestamp, and sometimes when fact_install_unit.factory_timestamp is null I need to pull it from the fact_install_arch.factory_timestamp.
sort of like:
(select fact_install_unit.factory_timestamp
from fact_install_unit, fact_install_arch
where fact_install_unit.fl_unit_sak = fact_install_arch.fl_unit_sak
and where fact_install_unit.factory_timestamp is null then display fact_install_arch.factory_timestamp)

> I was just stating that I do not have sufficient priveleges to create views in this database.
>
nm means "no more" than that
And how are we supposed to know that? You seem to have changed the thread subject to "unfortunately I only have read-only and insufficient priveleges", which is not even a question.
nm means "New Mexico":
http://www.myshortpencil.com/schooltalk/messages/85/515.html?971794944

Selection from BSEG table

Similar Messages

Maybe you are looking for