Selection in the Generic Data Source does not work

Hi gurus,
I have some problem with the selection in the Generic Data Source.
I have created a view as a base of a Generic Data Source.
This view is based on several table; i.e.: VBUK-VBELN (Sales Order number), VBAP-ERDAT (creation date of Sales Order), VBAP-POSNR (Sales order item), VBAK-BSTNK (Customer Purchase order number).
In the view, some join conditions have been defined: VBUK-VBELN = VBAK-VBELN, VBUK-VBLN = VBAP-VBELN.
I want to extract the Sales Order number, Sales order item and Customer Purchase order number for the Sales order created on the previous year.
On the Generic Data Source, I select VBELN (Sales order number) and ERDAT (creation date of sales order) as selection.
However, when I run the extractor checker (RSA3) on this Generic Data Source, the selection does not work at all, i.e.:
eventhough I restricted the Sales order number and/or the creation date of sales order, the generic data source ignores the selection criteria and extract ALL data.
Does anyone ever have similar problem? Did I miss some step in the Generic DAta Source creation? How to fix this problem?
Thanks a lot in advance.
Best regards,
Fen

Hi Fen,
Just check what is the output you get for the same selection for the view you created.
Bye
Dinesh

Similar Messages

  • DAC  - Reset Data Sources does not work properly

    Hi,
    I am trying to run a full load by selecting Reset Data Sources in DAC. However, when i select this option, only the data after Jan 11, 2014 gets picked up in the ETL. I have data starting from year 2010 in my database.
    How do i ensure that the full set of data gets picked up for full load?

    Hi Srini,
    The value of INITIAL EXTRACT DATE is as follows:
    $$INITIAL_EXTRACT_DATE
    Timestamp
    Value=19700101 at 00:00:00:00_dac_sep_Formatter=MM/DD/YYYY_dac_sep_Function=TO_CUSTOM_dac_sep_Runtime=Static
    How does this work? Actually this was working fine for DAC 10g and the client was able to perform full loads by resetting the data sources.
    What could be the issue with DAC 11g?

  • Using Two-Phase Commits and Data Sources does not work with OCI

    Hi,
    i tried to configure 2pc with OCI.
    when i use thin like shown in :
    http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14012/datasrc.htm#sthref578
    everything works.
    If i change the url from thin -> oci
    the transaction is rolled back.
    The documentation says
    http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14012/datasrc.htm#i1085507
    for using oci. But if i use this in thin mode, it breaks even the thin mode.... ;-(
    Can anybody help?

    It is fixed in 10.1.3

  • The '' secondary data source is not a relational data source, or does not use an OLE DB provider.

    Hi,
    We are using Teradata as data source in SSAS 2008R2, it’s using ‘.Net Providers\.Net Data Provider for Teradata’.
    In DSV, we have two data sources both using Teradata. While processing dimensions, all dimensions coming from secondary data source has error message”
    The '' secondary data source is not a relational data source, or does not use an OLE DB provider.”
    But we are not using OLE DB provider for now, we’ve searched some threads that named queries can be replaced for secondary ds, but since we have a lot of tables, it’s hard to implement using named queries.
    Any inputs would be appreciated. 

    Hi memostone,
    When defining a data source view that contains tables, views, or columns from multiple data sources, the first data source from which you add objects to the data source view is designated as the primary data source (you cannot change the primary data
    source after it is defined). After defining a data source view based on objects from a single data source, you can then add objects from other data sources.
    If an OLAP processing or a data mining query requires data from multiple data sources in a single query, the primary data source must support remote queries using
    OpenRowset. Typically, this will be a SQL Server data source.
    Here are the restrictions:
    The primary data source should be SQL Server and support OpenRowset to the secondary data source.
    Or you design the cube in such a way that rocessing for each object only needs to access data from a single data source
    I recommand you refer to the following article:
    Defining a Data Source View (Analysis Services):
    http://technet.microsoft.com/en-us/library/ms174600.aspx
    Regards,
    Bin Long
    TechNet Community Support

  • Target data source does not support the AGO operation

    Hi,
    In BI Admin Tool, I join Essbase cube and relational source. Then I apply Ago function to Essbase measures. In BI Answer, I try to run query that includes Essbase Ago measures and relational columns(non measures), error message shows the following detail:
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 22001] Target data source does not support the AGO operation. (HY000)
    When I remove the relational columns or run Essbase current-date messures, the result is fine.
    So, what's exact meaning of this error message? and does the relational columns (non-measure) support Essbase measures' Ago function?

    to clarify:
    fail case:
    criteria
    YEAR | YTD,gen03 | MONTH_NAME | SALES(YEAR_AGO)
    cube dimension: year, ytd,gen03
    relational source: month_name
    cube measure using AGO(): sales(year_ago)
    result: error messageSuccess case:
    criteria
    YEAR | YTD,gen03 | SALES(YEAR_AGO)
    cube dimension: year, ytd,gen03
    cube measure using AGO(): sales(year_ago)
    result: success~! how can i solve it? thx

  • My iPod dispalys this message: "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?

    My iPod dispalys this message:
    "Connect to a computer. Use iTunes to restore."  When I connect to a computer, iTunes doesn't recognise it.  The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
    I have seen the Apple webpage suggesting the "five R's" (including restore).  Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data. 
    I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data. 
    Thanks in advance!

    Did you try a hard reset with the iPod still connected to your PC?  Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
    To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Visual Composer 7.0: system (data source) does not appear

    Hi...
    There is a problem: system (data source) does not appear in Visual Composer 7.0
    1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
    2. However, as the data source in Visual Composer a connector MDM does not appear.
    3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
    What the .....?
    P.S. The role of the creator of the connector is the same user of Visual Composer
    Thanks...

    Hi...
    There is a problem: system (data source) does not appear in Visual Composer 7.0
    1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
    2. However, as the data source in Visual Composer a connector MDM does not appear.
    3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
    What the .....?
    P.S. The role of the creator of the connector is the same user of Visual Composer
    Thanks...

  • Data source does not exist

    Dear all,
    am extracting the data from Vistex datasource,IRM/LIS_RM_IPCRASP               IP CR Agreement Conditions
    after activating in RSA5 i can able to see in RSA6
    but while activating the data source after the extract structure has successfully generated,
    the system showing data source does not exist
    plz help me

    hi,
    when i click the maintain button save button will appear,
    but in my case this save button not highlighting...
    when i check in ST22 the system proposed error mesage is table illegal statement,
    i found this error in many forums but its not related to datasource actvation,
    plz anyone giv me solution as soon as possible...
    regards
    Edited by: gadhatharan thirunavukkarasu on Oct 15, 2011 7:57 AM

  • Finding the Generic data source for vendor master.

    Hi,
    I am trying to find the generic data source for 0VENDOR Infoobject on R3. But I am not able to find the exact match. Can any one help me? I just started on BW!!.
    Thank you

    Hi Tippireddy,
        you want to extract the vendor information through the business content then go through the following navigation...
      T.code RSA5 -> MM-IO (Master data Materials Management in general) -> 0VENDOR_ATTR or 0VENDOR_LKLS_HIER or 0VENDOR_TEXT these three are the standard data source for vendor.
    Regards,
    PRK

  • Data Source does not exist in version A.

    Dear Experts,
    I have created Data Source in R/3 ( ECC ) by t. code rso2. If am trying to display Data source by t.code RSA2 . It gives message
    Data Source does not exist in version A.
    Regrads,
    Anand Mehrotra.

    Hi Anand
    RSO2--->Put DataSource name -
    >Change button -
    >Save -
    >It should open a new screen with DS header data -
    > From Menu ( DataSource -
    >Generate).
    Now you should be able to see your datasource.

  • Automatic Selected Item of List Builder Component Does not work (anymore)

    Hi all,
    Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
    Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
    This are my settings of the list builder component (which was running correctly earlier..):
    -at the general tab I defined a range of labels
    -at the general tab I defined 2 data column insertion series
    -at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
    -all of the data comes from an external xml data source
    You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
    I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
    Greetings Erik-Jan Vriens

    Hi njnits,
    Print view button is a standard component of Xcelsius: look at it in the IDE
    Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
    All visualisations, not only the table,  in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
    The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
    Hopes this info helps....

  • Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service

    Here is the settings:
    SharePoint 2010 with SQL server 2008 reporting services configured
    When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
    The data parameter is set as "date and time" type and field name equals the col name in the SP list
    When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
    Is any step missing?
    Thanks for any advice !

    Hi ,
    How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
    Have you tested if other type parameter worked?
    Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
    http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Daniel Yang
    TechNet Community Support

  • I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

    I have no sound for games in my iPad. I have tried the reset but it does not work. The speakers work as I have sound for music and videos.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Switching browser using IE tab plus - the Norton Identity Safe does not work

    Using Firefox 4.0.1 and Norton 360 5.1.0.29 - which has recently been "fixed" to work together (by Norton).
    When using IE Tab Plus to switch rendering engines (Firefox to IE) the Norton Identity Safe does not work by not pre filling user names and passwords to sites that are registered in the Norton Safe and also for any new sites does not offer the option to add a new site to the Norton safe . . . . . is this a Norton or Firefox or IE Tab issue? And has anyone else had this problem?

    Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
    I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • Droid Razr Maxx HD Data & SMS does NOT work in South Korea

    If you are going to South Korea this phone only operates as a "dumb phone" for phone calls ONLY. Data & SMS does not work at all. I contacted Global Support daily for one week with no resolution! I received conflicting information with 2 support folks telling me that the fix was to do a factory reset. So I reluctantly did this and it did not fix anything. It only wasted my time especially re-installing all my apps, etc. Then 4 support folks told me that you should never do this out of the country!! Anyway the last person i spoke to which was a network technician was very honest. He told me that I was "SOL" and he had no idea how to fix this problem. He said that he would have to get some teams together to try to fix the problem. And I was told that I would receive an email with an update. And of course I have not received any email of correspondence from Verizon. Very frustrating...

    I found a solution. Okay so with the most recent update Verizon made the switch from sending text messages over their 1x network and moved them to their LTE (and possibly 3g) network, hence the reason they are sending so much faster. Today I was in a classroom that is underground and has terrible reception and noticed that I was getting delivery reports again but that my texts were sending slower, like they used to. I dug around in the phones programing menu and found a new option call "MO SMS over IMS" and it was enabled. Disabling it switches your texts back onto the old 1x network. So if you choose to make the switch, your delivery reports will come back but sending will go back to being a little slower. To get to this menu open up your dialer and type in ##7764726. Next hit send and when prompted with a password type in 000000 and hit verify. Scroll down to SMS/MMS settings and select it. Next scroll to the bottom, select "MO SMS over IMS", and disable it. Now your good delivery reports back!

Maybe you are looking for