Selection in the 'Sample Window'

Hi,
I am using the sample window in logic to select parts and save them, e.g kicks etc.
What i want to know is, is there a way to adjust the start and end region (the dark region) of what you have selected?
I select a part of the audio file i want to save, but then if i zoom in to tighten up the start or end position, my previously selected selection dissapears.
Any help or advice would really be appreciated.
Many thanks.

Hold down the shift key to drag the region ends, this will allow you to alter the length of the region you have selected.

Similar Messages

Iphoto gives message "no images were selected" when hit print button. Yet the the images are clearly selected in the print window. I've printed hundreds of images without a problem before. Iphoto 6.0.6, MAC 10.5.8

Iphoto gives message "no images were selected" when hit print button. Yet the the images are clearly selected in the print window. I've printed hundreds of images without a problem before. Iphoto 6.0.6, MAC 10.5.8, Suggestions?

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

My Mac Book Pro using Mountain Lion will show a usb headset with a mic to select in the settings window. But the Rosetta Stone software I am using will not find the mic for me to select and use. What should I do?

Mac Book Pro with OS X Mountain Lion will not recognize headset mic via Rosetta Stone software. What should I do?

Hi Illaass,
I am using version 3. I have used the apple/settings on my mac. The headset is appearing there and it is selected there. In the Rosetta Stone select/find window nothing shows up. It is blank. But the volume bars react when I speak and sliding the fader has the expected effect of raising and lowering the input. There is just no device showing up as the selected input device in the Rosetta Stone software.
I have done everything my Mac instructions say to uninstall and reinstall the Rosetta Stone software properly.
I'm guessing the problem may be in the licensing. I installed it first on the old hard drive that crashed. Maybe that used the terms of the license and now installing it in the new hard drive violates the license somehow. So that's why it will not work properly. It allows me to open the lessons and asks me if I want to continue from where I left off. I click continue. Then it asks me if I want to register the software. I click the tab for already registered software and click continue. Then nothing happens. So again I click on the button that indicates I want to continue lessons from where I left off. The same process happens with it asking me if I want to register the software. And it will not proceed through a lesson.

When I select a mail message, there isn't a window that shows the thread and message...That window is gone. I only have the inbox window and the left sidebar with my mailboxes, but no "preview window" that shows the message selected in the inbox window

Any help would be greatly appreciated...I just want to reset mail to the default UI and I can't even figure out how to do that. Any help would be greatly appreciated..I have no idea how I messed this up!

Actually there's no bar/dot. I think that's for a previous version... I'll include a screenshot:
As you can see theres no "bar" at the bottom of the window...help?!

The properties window does not open properly for bookmarks.

When I go to Bookmarks > Bookmark This Page, the window that opens should have the information filled in, correct? Because mine is always blank. The bookmark does get made if I click Done, even with everything looking blank. Also, when I right-click on a bookmark & select Properties, the Properties window that opens only shows the blue bar at the top, nothing else. I can't expand the window. It's been doing this since the previous version that I had. Also, keep in mind that I'm a computer technician, so I know what I'm doing.

Hi,
does it happen for all tables or it's related to specific set of tables (or just one table)?
PS. Did some more research: The error message from the logfile seems to be unrelated to the recalcitrant properties window. Yes, those errors are not related to problem.
properties dialog won't appear if there are some errors during initialization of dialog and its related to table that cause the problem. You should be able to open dialog for another table.
It'll be great if you can find out after what changes dialog for some tables doesn't appear.
Thanks,
Philip

Firing a view based on a selection from a popup window

Hi,
I have a main window in which there is "Display Details" button and a view container to hold a view. On clicking this display button I'm showing a pop-up window which will show the user the options to select a particular view. After the selection and clicking on OK in the pop up window the corresponding view should be shown the view container.
I tried this by firing an outboung plug to the corresponding view based on the selection in the popup window. The problem is I cannot create a navigation link in the window as the popup view is not part of the main window.
Could you please provide me your insights on how to handle this scenario?
Regards,
Vivek

Hi Vivek,
Please refer this article: [Creating Navigations and Embedding Views at Runtime - Web Dynpro ABAP|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50f3660d-ad29-2b10-2482-8120e56942dd?QuickLink=index&overridelayout=true]. Also refer [Thomas' reply in this thread|Embed a view dynamically in a ViewContainerUIElement;.
Regards

Can I move audio in logic by the sample in the sample editor to compensate

I wanted a final say on wether or not I can move audio with sample accurate percision by moving the anchor in the sample editor with update in arrange page turned off. i just need a verification of this.
Thanks guys

yes you can and should use the sample editor to make
such compensations. you do this by aligning the
anchor point to the sample or part of the wave form
that you want to correspond to a beat or subdivision
(ideally) though of course it can be any point you
want it to.
if you use 'pickup clock; move object or event to
SPL' KC the anchor point will jump to the SPL.
Philip K is right though; if your entire track is out
by the same amount that you can measure you could use
the sample delay (though of course that will only
delay it not move it forward in time). but you won't
see the waveforms align themselves to the beat
meaning you would have to be aware that that track
has been compensated for.
on balance i would edit with the sample editor.
I was thinking that you could delay the rest
of your tracks by however many samples thus
aligning by compensating everything else though
in real world situations I don't know how practical
this would be. I keep forgetting that you can measure
how many samples you select in the sample editor even
if you cannot see them individually. So I will defer
to the voice of experience on this. If Rohan would use
the Sample editor, then I would tend to agree

I want to get rid of the Bing screen but there is no "menu at the top of the Firefox window" for me to "select Tools and then select the Add-ons menu item. "

I suddenly have a "Bing" screen when I sign onto Firefox---and I want to get rid of it. The support section of Firefox says
1. "From the menu at the top of the Firefox window, seledt Tools and then select the Add-ons menu item."---but I see no "menu item" nor Tools, much less Add-ons.
2. "In the Add-ons window, click on the Extensions panel."---but how do I find the Add-ons window?
3. Find the Bing Bar and Search Helper Extension in the list and click Disable for each of them."---but what and where exactly is that?
At the top of the screen is only a Yahoo icon on the left and to the right of it a search box, "Web Search,", "My Apps," Yellow Pages," "Weather," "Updates," and "Skype." to the right of those there is a green cross saying "Add more apps. to your toolbar" and to the right of that a sort of gear shift looking icon saying "toobar settings."
So, in short, how do I get rid of the Bing screen and how do I access those Tools?
Thanks.

To get rid of Bing Search Window..............
Click on View tab / Tools and un-check 'Search' (alias for 'Bing')

Lately when using Firefox the mouse no longer works and no links or tabs can be selected. The only way to get the mouse to work is to switch windows with ctrl+tab

The mouse is completely unavailable, not even able to select anything on the taskbar or start button.
When this started happening I had to restart firefox, then I tried opening the task manager to see if anything was hogging resources and I found simply opening the task manager freed up the mouse, then I found simply using alt+tab to switch windows did it, then I discovered using alt+tab to cycle through the available windows straight back to firefox does it.

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs

When using pop up editor windows on a Joomla 1.0.15 website the URLs selected in the pop-up are not passed back to the main window

The Joomla content management system version 1.0.15 provides a content editor which uses pop-up windows to select images and files. When using any of these pop up editor windows since 3.6.9 the URLs selected in the pop-up are not passed back to the main editor window.
Up until FF 3.6.8 there were no problems, but FF 3.6.9 and 3.6.10 both exhibit this same problem, as does FF 4 Beta 6. (Support Question raised on this forum in early September when 2.6.9 was released but no response)

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Using bootcamp was installing windows xp, at the select ntfs or fat format selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error.

using bootcamp, was installing windows xp, at the select ntfs or fat format mistakenly selected "leave the current file system intact." How can that be changed to a correct choice. Mac side opens correctly. Windows shows disk error. and doesn't respond to press any key. When looking in the startup disk section, windows on boot camp can be seen, but not selected. (13"MacBook Pro 10.6.8)

Have a read here http://support.apple.com/kb/TS1722 for solution.
Stefan

HT5706 To the above Step 1, "Select Settings General Update Software"; starting in the finder window of my Apple Air laptop (with version 10.8.5 OSX), how do I get to the starting point "Settings"?

Starting from the finder window of an Air model laptop (OSX 10.8.5) were do I find 'Select Settings' to access review and update of the Apple TV hardware I just spent eight hours trying to set up?

I believe those instructions are for the Apple TVand not the MacBook Air.

I am running 4.0.1 and when I download something the Download box stays blank-even though I have selected in General Preferences 'Show the downloads window when downloading a file' AND selected 'Save files to Downloads'....???

I am running 4.0.1 and when I download something the Download box stays blank-even though I have selected in General Preferences 'Show the downloads window when downloading a file' AND selected 'Save files to Downloads'....???

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I am unable to select the correct paper size when printing photo's in iPhoto 11. When I select the paper size in the custom window for 4x6 prints the prints only appear on an 8 1/2x11 page. My Mac is a year old iMac running 10.8.2.

I am unable to print 4x6 photo's using iPhoto 11. When I do they only print out on lettter size paper even though I enter 4x6 in the custom window in the print size menu. My older Snow Leopard system using iPhoto 9 the paper size window offered a 4x6 paper size which worked well.

Selecting paper size in the first sreen tellis iPhoto what papery you are going to use - it does not tell the printer what paper to use - printer specific options on on the last (second or third if you customize the print) screen where you tell the print any specifics like paper source (typically printers need to you tell them where a specific paper is loaded - they do not really know the sizes in each paper tray)
LN

How do I change the download behavior so that the "save as" radio button is selected by default instead of "open with" in the download window?

For most file types whose download behavior is set to "always ask" the "save as" option is selected by default in the download window. However, for a few others the "open with" option is selected instead.
Note that Firefox is not automatically opening some files instead of saving them. I still get to choose between saving or opening them, but certain file types start with "open" selected whereas for others "save" is the default.
What I'm looking for is a way to change all file types to default to "save as" in the download window.

see : [https://support.mozilla.org/en-US/kb/change-firefox-behavior-when-open-file Change what Firefox does when you click on or download a file]
see also : [https://support.mozilla.org/en-US/kb/set-how-firefox-handles-different-file-types Set how Firefox handles different types of files]
thank you

Selection in the 'Sample Window'

Similar Messages

Maybe you are looking for