Selection input should display in report designer

Hello Friends,
Need some help .
I am currently working on BI7 and there is one requierment for Report Designer.
Actaully user is looking for the selection creteria after execution of the report like
I have executed the report designer application with the company code 5060 ,
then I should be able to the see the selection creteria , where as I am able to see the data.
In this case ,I am able to see the data but could not guess that what was the my selection creterai like we get in Bex Query or in Bex Anaylyzer.
So please let me know how can we check the selection input which we have given or how can we display selection input in Report designer ?
Is there any specific settion , please advice .
Thanks in advance.
Regards

thanks Ajeet ,
But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
Thnks . please advice.
Regards

Similar Messages

  • Hierarchy Node display in report designer

    Hi,
    Urgent please help me out.
    I have an issue with report designer. I created a static report in Query designer with 2 structures. When i try to include this query in Report designer, only the last level nodes are getting into the Report designer. All the above level nodes are not featuring in Report designer.
    Please help me how to make these top nodes visible in Report Designer.
    Points are assured for each reply

    thanks Ajeet ,
    But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
    Thnks . please advice.
    Regards

  • Dynamic Filter Display in Report Designer

    Hi All,
    We have implemented a new BI reporting tool and are using Report Designer for the output format. The problem is that we cannot see any dynamic filters or navigational level when printing as RD takes it back to the original format. To overcome this issue, we have given the same query with the variable selection so that RD always prints the variable selection but this has reduced performance.
    Anyone with ideas to overcome this situation or any workarounds will be appreciated.

    thanks Ajeet ,
    But this is regarding Report Designer where i create appliction which is based on the WAD or Bex Query . Do we have any setting in Report designer where we can check the selection input which user has given while execution of the report.
    Thnks . please advice.
    Regards

  • How to hide currency ($) display in Report Designer

    Hi Reporting experts,
    My query has amounts in keyfigure structure. When I use WAD or run directly from the query the display of $ sign is showing only on the top row, but when I use the same query in the report designer the $ is showing on every cell. How to avoid displaying the $ in RD.
    Thanks for your help.

    Ram,
        Create a formula and use the function NODIM(<your KF>) and hide you KF column which shows the $ sign. This would suppress the $ sign.
    Hope this helps...

  • How to display a report in a container

    Hello All,
    There are 2 scenarios:-
    1) On left side navigation panel, I have a tree control. On double click on a node of a tree, I want to display a "report output" on the right panel. I have created the left panel and right panel by splitting the main custom container using splitter control. But I am not able to submit a report output on double click event of tree node as I dont know how to specify the parent container for the report.
    2) I want to divide the custom container into 4 equal parts. Then each part should display four reports which are output of 4 different programs.
    Kindly help me out with his issue.
    Needless to say that points will be awarded
    Thanks n Regards,
    Abhishek

    Hi Abhishek,
    you can't run a program in an container. That's not possible. But you can handle your requirement using one of the following ways:
    Way 1:
    Call the program in the double click event handler method by using the the statement e.g. submit and return. The program is then called in a separate screen(not in the container).
    Way 2:
    Copy the functionnality of the program in e.g. function module(FM). This FM gets the input parameters, processes the input and returns the results. The results are displayed e.g. in an ALV Grid. The steps getting the display results and setting the display data for the ALV are handled in the double click event handler method.
    Best Regards, Edemey

  • Calling the Selection screen in the Interactive report

    Hello,
    this is urgent requirement.
    I need to call the selection in the interactive report.
    my requirement is i have to display list of the table name which is stored in the table DD20T.
    in basic list i have to display all the table name.
    if i double click the table name that the key field of the particular table with select option should display in the secondary list.
    so please help me.
    Thanks and regards,
    zubera

    Hi,
    Go for Drill down report.
    call transaction SE16 or SE16N. pass the tables to the transaction.
    exp code:
    DATA : lv_field(10) TYPE c VALUE 'MARA'.
    WRITE : lv_field.
    AT LINE-SELECTION.
      SET PARAMETER ID 'DTB' FIELD lv_field.
      CALL TRANSACTION 'SE16' AND SKIP FIRST SCREEN.
    please reward if help full..........
    By
    Gupta

  • Selection inputs in report designer

    Hello Friends,
    Need some help .
    I am currently working on BI7 and there is one requierment for Report Designer.
    Actaully user is looking for the selection creteria after execution of the report like
    I have executed the report designer application with the company code 5060 ,
    then I should be able to the see the selection creteria , where as I am able to see the data.
    In this case ,I am able to see the data but could not guess that what was the my selection creterai like we get in Bex Query or in Bex Anaylyzer.
    So please let me know how can we check the selection input which we have given or how can we display selection input in Report designer ?
    Is there any specific settion , please advice .
    Thanks in advance.
    Regards

    Hi,
    all the values in a selection screen are variables, and in the report designer is't possible to add the variables of a query, so I think it must be possible to add your selection.
    But this is only possible if you first execute the report to the web and not directly to PDF...
    First add a report section with different rows and columns, and then drag and drop the variables...
    Greatz
    Joke

  • How to create  some columns dynamically in the report designer depending upon the input selection

    Post Author: ekta
    CA Forum: Crystal Reports
    how  to create  some columns dynamically in the report designer depending upon the input selection 
    how  export  this dynamic  report in (pdf , xls,doc and rtf format)
    report format is as below:
    Element Codes
    1
    16
    14
    11
    19
    10
    2
    3
    Employee nos.
    Employee Name
    Normal
    RDO
    WC
    Breveavement
    LWOP
    Sick
    Carers leave
    AL
    O/T 1.5
    O/T 2.0
    Total Hours
    000004
    PHAN , Hanh Huynh
    68.40
    7.60
    76.00
    000010
    I , Jungue
    68.40
    7.60
    2.00
    5.00
    76.00
    000022
    GARFINKEL , Hersch
    66.30
    7.60
    2.10
    76.00
    In the above report first column and the last columns are fixed and the other columns are dynamic depending upon the input selection:
    if input selection is Normal and RDO then only 2 columns w'd be created and the other 2 fixed columns.
    Can anybody help me how do I design such report....
    Thanks

    Hi Developer life,
    According to your description that you want to dynamically increase and decrease the numbers of the columns in the table, right?
    As Jason A Long mentioned that we can use the matrix to do this and put the year field in the column group, amount fields(Numric  values) in the details,  add  an filter to filter the data base on this column group, but if
    the data in the DB not suitable to add to the matrix directly, you can use the unpivot function to turn the column name of year to a single row and then you can add it in the column group.
    If there are too many columns in the column group, it will fit the page size automatically and display the extra columns in the next page.
    Similar threads with details steps for your reference:
    https://social.technet.microsoft.com/Forums/en-US/339965a1-8cca-41d8-83ef-c2548050799a/ssrs-dataset-column-metadata-dynamic-update?forum=sqlreportings 
    If your still have any problem, please try to provide us more details information, such as the data structure in the DB and the table structure you are currently designing.
    Any question, please feel free to let me know.
    Best Regards
    Vicky Liu

  • Displaying selection screen details in Alv Report  output display as Header

    Hi all,
    May be somebody knows how I can show selected values with select-options in top_of_page using REUSE_ALV_GRID_DISPLAY.
    This shoud work for all the reports and diff selection screens .
    I need one dynamic process which will for display any report selection screen selected details.(Basically varient information of report).
    Small example if possible, please.
    Thanks in advance,
    Rimas

    Hi Thiru,
    Thanks for the input.
    This is my exact requirement.
    Hi Experts,
    I would like to Display / Print  Select-options selected details in ALV Header.
    Ex: Say suppose here i enter kunnr as 1000
                                            lifnr as    2000 to 4000
                                            p_langu as  'EN'.
                                           p_dir  as 'C:\TEMP,
                                           p_upda as 'X'
    for selection screen below.                    
    SELECTION-SCREEN :BEGIN OF BLOCK blk1 WITH FRAME TITLE text-000.
    SELECT-OPTIONS : s_kunnr FOR kna1-kunnr.
    SELECT-OPTIONS : s_lifnr FOR lfa1-lifnr.
    PARAMETER      : p_lanuge LIKE t002-spras DEFAULT sy-langu.
    PARAMETER: p_dir  LIKE rlgrap-filename
               DEFAULT text-003 LOWER CASE.
    PARAMETERS: p_upd AS CHECKBOX DEFAULT 'X'.
    I dont want to Hard code selection screen values like
    DATA: header TYPE slis_t_listheader,
    wa TYPE slis_listheader,
    wa-typ = 'S'(093).
      wa-key = s_lifnr .
      wa-info = 'Vendor no".
      APPEND wa TO header.
    I want dynamic process for all of my selection screen values selected
    hard code may be it will be fine small selection screen it will work.
    Fur that i got one process to get dynamically through fm
    Ex: DATA: irsparams TYPE rsparams OCCURS 0 WITH HEADER LINE.
    CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
    EXPORTING
    curr_report = program
    TABLES
    selection_table = irsparams
    EXCEPTIONS
    not_found = 1
    no_report = 2
    OTHERS = 3.
    loop at irsparams.
    write : / irsparams-SELNAME.
    write : / irsparams-SIGN.
    write : / irsparams-OPTION.
    write : / irsparams-LOW.
    write : / irsparams-HIGH.
    endloop.
    I have done my requirement partially but i am failed to achive my full  requirement.
    Because
    rsparams  strcture is diff from  slis_t_listheader.
    Can any one help me for further assistence to display irsparams strcture data in alv header.
    Thanks
    Nag

  • Query Selection Screen in Report Designer/WAD

    Hi Gurus,
    Please help. Iam try to copy two BEx queries into one report using Report Designer & Web Application Designer. Iam sucessfull in it, however when I execute the report either by report designer or WAD, the report does not populate the selection screen, it just gives you the output of the two queires into one page. Is there a pre-settings we need to perform to get the selection screen for each of this report?
    Thanks!

    Hi,
    Front-end upgrade will not help in this case. This feature "Display Variable Screen [VARIABLE_SCREEN]" was introduced in SP8 backend. You need SP8 backend to be able to use it.
    You will find this setting in "Properties" -> "Web Template" (in combo box) -> "Web Template Parameters" -> "Behaviour" -> "Display Variable Screen"
    This setting is defined in metadata and required an implementation on Java side (also SP8 required)
    Regards, Karol Kalisz
    SAP BI Development

  • Inputs required  for Displaying whole Report  in Single Currency only

    Hi All,
    Actually in R/3 Transactions are recorded in different currencies like 1)USD
                    2)AUD,CAD,EURO(Non-USD or FCC)
    Firstly,
    I need to display whole report in USD only. I have to convert all other currencies to USD (What are the posssible options and how to handle Currency Conversion)
    Second Scenario
    Moreover I have to provide Selection Screen options for Query in  such a way that query  has to display like below
    1) USD only.( If I give USD in selection screen of query it has to Retreive USD data only)
    2)FCC(NON-USD) only.(It has to retreive AUD,CAD,EURO etc only)
    3)Doc Currency (if i give whatever currency like it that may be USD or CAD or AUD that only should be retreived.)
    How to handle the above Selection criteria
    As iam not aware of the above Pls be very clear.
    Regards,
    C.V.

    Hi,
    If you shift the display mode of FF7B to standard Overview (F9) or click balance on display currency, the values will be shown in selected display currency in the entry screen.
    The pre-requisiste for getting correct value is to maintain the curr conversion table daily using OB08.
    Regards
    Prasad AV

  • Display Different reports depending on values in a User Selectable Dropdown

    Hello,
    I want to create a report which has a Drop-down and depending on the value selected from the drop-down, i want to display different reports.
    Say, a drop-down has 3 values, v1, v2 and v3. Now, if a user selects v1, he/she should see report r1. If v2 is selected, the user should see report r2. if v3 is selected from the drop-down, then report r3 should be visible. All the 3 reports have different structures (even different no. of columns). Also, v1, v2 and v3 are 3 different values belonging to a same picklist type field.
    Do you think this is possible? If yes, How ?
    Any sort of help will be highly appreciated. Thanks in advance.
    Regards,
    Ramil.

    The only way i could see this working would be to create a picklist on a object and then create your three reports placing them within the same folder and name the report something under 30 charters then place the same name in the picklist value and create a weblink to the report which at selection of the report will run either report.

  • Get input and display output on same screen for report

    Hi frnds,
    two params
    that is mat.no,desc.
    enter the mat.no and also display the description of that mat.no in same input screen for the report.
    How can i archieve .
    Thanks in advance.

    Hi,
    It is not possible in Dialog Programming too. But there is an alternative. You can make the material number field as drop down. Assign a function code to that. Now in PAI you can code accordingly to display the description.
    In TOP.
    TABLES: mara, makt.
    DATA  gv_maktx TYPE makt-maktx.
    In PAI.
    CASE sy-ucomm.
    WHEN 'F_MATNO'        "function code assigned to the material number drop down field
         SELECT SINGLE maktx
          FROM makt
          INTO gv_maktx
          WHERE matnr = mara-matnr. " mara-matnr is the dictionary reference to the material number drop down field in the screen.
          makt-maktx = gv_maktx.    " makt-maktx is the dictionary reference to the material description field in the screen.
    ENDCASE.
    Thanks,
    Sri.

  • AFTER LOADING THE DATA INTO THE INFOCUBE IT SHOULD NOT DISPLAY IN REPORTING

    Hi experts,
                     I have the data in infocube. When i selected the cube in reporting it should not display i.e; the data should not display in reporting.
    thanks nd regards,
    venkat

    Bit strange requirement. But if you have data in Cube and automatically its will be available for Reporting. unlike ODS, we do not have option of "Automatic request activation".
    However on repoeting side, you can restrict the values to #  and exclude everything from slection. But not good solution as such.
    Regards
    Pankaj

  • Displaying different reports based on user input.

    Hi,
    I have a requirement to display the invoiced amount and Ago amount on a dashboard. The ago amount will be dynamic in that if user selects the prompt 'compare with' as previous day, it should display day ago amount along with todays amount. It he chooses month, then it should display this month's amount and previous month's amount.
    Is there a way I can achieve this on a dashboard?
    Thanks,
    Vivek.

    Use guided navigation. And you need to have 2 reports (one for day level and the other for month level, eac has own AGO part). And some reports for guided navigation conditions.
    Regards
    Goran
    http://108obiee.blogspot.com

Maybe you are looking for