Selection is not available in report.

Hi All,
        When i am runing a report in that report it is asking for varible values. When i am entering for particular plant then there is workcenter variable but it is not showing that workcenter which required for that plant. In short workcenter is not availble for that plant.
          So it would be great if can any one tell me how do i check this is in BW side to get that workcenter availble for seletion.
Your response would be appretiated.
regards,
Nitin.

Hi,
Have checked the data in the Infoobject, if the data is present, then can you check the same value in the cube and again if it exists, that means the transaction data is loaded.  Now, you need to check the attribute change run. If it is not done please execute the attribute change run. Now the updated value will be avaiable in the report.
If the value does not exists in the transaction data (say in cube here) and the infoobject property in the cube was set as the "only posted values for navigation" you can't see the data. You can try the other options as well  like the read master data and on.
Regards,
Raja Vuppala.

Similar Messages

  • New Data is not available in reporting after revrse posting

    Hello All
    I have a cube and data loaded into it.Now i came to know that one request is having wrong data and need to be deleted,without deleting I did reverse posting.Now that particular data(means new data) is not available in reporting.The reporting symbol in request(manage tab) is not available for this request.
    Now what should I do,in order to get new data in reporting.
    regards
    blaji

    sorry i solved it

  • I keep getting the iTunes error message "the item selected is not available in the UK store" how do i fix this please ?

    I keep getting the error message " The item selected is not available in the UK store" and i am not able to do anything else with iTunes, any idea how i fix this as it appears to now be restricting my account access across the Mac Book, iPad, iPhone and Mac Mini in the house ?
    Thanks

    Hi Thanks,
    I could only see posts from some months ago and thought I had something different.
    Looks like I have not been using the correct search terms.
    Will wait and see what happens.

  • The folder you selected is not available

    Hi, 
    We have Ex2010 and Outlook 2010. When we send calendar sharing invitation to one of user and she try to open it or do YES OR NO...the following error pops up
    The folder you selected is not available
    It is working fine in OWA but not in outlook. Tried to change profile, tried on different computer but same error. What is wrong? 
    Hasan

    Hi Hasan,
    Please select the recipient from Globle Address List (GAL) instead of autocomplete list. Then re-send the calendar sharing invitation to have a try. For detailed information, please refer to:
    http://www.slipstick.com/outlook/sharing/folder-sharing-available-error/
    Regards,
    Winnie Liang
    TechNet Community Support
    Hi Winnie, 
    This is not working. Same error. 
    Hasan

  • I have the latest version of photoshop cc . Why is the focus select option not available ? (for selecting the in focus area)a)

    I have the latest version of photoshop cc. Why is the focus selection option not available ?

    Use CC 2014 menu Help>System Info... use its copy option and paste the info here.  So we know your running CC 2014 not CC and that you have an enabled GPU....and latest device drivers.

  • Data is not available in report

    Hi Experts,
    i have purchase order report created on multiprovider.
    Particular vender number data not showing in report but its available in Data target.
    suggest possible cusses?

    Hi Raj
    Check if you have any additional restrictions in the report which are filtering out the vendor numbers.
    If you are using a master data object make sure the master data is activated.
    Also check the assignment for the vendor infoobject in the data target/multiprovider.
    Regards,
    Ninad

  • Data not available in report S_ALR_87013604

    Hi All,
    For some company codes the data is not executed for the report S_ALR_87013604. We have three controlling area and assigned with compnay codes. only a few company code are excuting data. Is this a chance of inactive profitanalysis for some company codes in OKKP.
    Suggest me on this

    Hi,
    Please find the below information on the report:
    This report enables you to compare the costs posted on the individual cost elements with the expenses recorded in Financial Accounting.
    In the report you can search for those accounts for which a reconciliation between Financial Accounting and Controlling is required. Reconciliation is necessary, for example, if you have executed a cross-company code allocation within CO.
    The report only displays the accounts that require reconciliation. The system uses the group currency as the report currency.
    Kind Regards
    Umapathi G

  • Key field not available in report

    Hi,
    I have a DSO and in that I have 1 key field and 20 data fields.
    I was able to load the data successfully in the DSO. And I am creating a report based on this DSO.
    But when I create a report, I was unable to view the key field in the report.
    I went to the query designer and checked, I could not see that particular key field also in my query designer, I could only see the data fields.
    Could someone please guide me in this regard???
    Would definitely assign points for the solution...
    Thanks & Regards.

    Hi,
    Please uncheck the Attribute only check box in the General tab of that Keyfield info Object.
    If any info Object checked as Attribute only then those objects wont display in the Query Designer.
    dont forget to give me the points..
    thanks,
    CK

  • Regarding planning data not available in reports

    HI SdN,
    In my reports I'm populating actual data and planning data.But as of now we have only actual data display's in our report.what we are doing is we are populating data in BW and analysing on the base of the product cutomer (compounded) combination which is coming from r/3.(groups and sub-groups which we are entering at r/3 )
    So our report shows us on the base of groups and sub groups which we are entering at r/3 level.That all is working  fine but our customer wants that planning data is also displays in the reports as of now it is showing not assigned values in report.
    so my question is ,To display planning data for group and sub groups provided by r/3 on the basis of product and customer (though other reports are showing planning data)  , I know that I need to include this compounded infoobject in bps cubes but shall I also need to consider this in the BPS functions?I'm confused here and not sure about this.
    And is that mandatory to have that componded infoobject mapped from underlying ods for customer.Because as of now planning cube is only updated with BPS functions?
    Could you pls advice?
    R

    Hi Rubane
    If the actuals and planning data are in seperate cubes then you will need to create a multi over both cubes to report on them together. However your BPS planning must be done against the same infoobject for you to be able to report on them together. If you are planning against the same IO the groupings from R3 will apply.
    Also include the infoobject 0REQUID as a characteristic restriction and restrict it to variable 0S_RQMRC (Most Current Data)
    Josh

  • GL Data not available on report

    Hi All,
    I have a report which has been working fine. The report was based on cost for controlling cube which is based of WBS elements(cost).
    Now the report has been added with a column which gets its data from GL cube. I have added the 2 cubes in a multiprovider but cannot see the data for the column from GL.
    This same GL cube is being used on multiple other queries and has no problem.
    What could be the reason for the GL data not being displayed. I have also restricted to the respective infoproviders.
    Appreciate all the help.
    Kind Regards
    James

    hi,
    first of all check in tcode LISTCUBE for MP if you are getting data for any of the columns from GL cube.
    also check the characteristics from controlling cube and GL cube which are common and whether they have the same length ,  data types and values. The join at the MP level may not be working correctly which is why the data may be missing.
    regards,
    Arvind.

  • SSRS 2012 multi select parameter not working in Report Manager.

    Hello,
    I have one report with Multi select parameter. its working fine in bids, report server but I am facing some issue on report manager 2012.
    Issue is, In Multi select parameter I have Suppose 6 value a,b,c,d,e,f  after the deployment on report manager for the first time report is working fine with selecting all the value. but for the second time if my selection include either
    a or f report gives no result and check box get unselect.
    I also try on different report manager but same result.
    what can be a issue here causing problem only for two value but working fine for other value?
    Thanks,

    Hi Javed,
           The Issue is with when you click on View Report button of Report Manager for Parameters which contain CHAR(10) and CHAR(13).
    Where ever that Column is used in Report Data Set ,
    Use replace(replace(Param,char(10),''),char(13),'')  function.
    ----------------Please Mark This as Answer if it helps to solve your problem---------------------------- 

  • Since last update, my print selection is not avail. Please advise

    I do not have a selection, icon, ETC for printing copies

    If your phone supports Siri (a 4 doesn't), you _should_ be able to  hold down the home button until she is ready then say call XXX. Of course, that is only a stopgap. I have no idea why Apple has to break things to advance their OS. I'm not happy about many of the stunts they pull these days. The only other suggestion I have is to delete the pair between devices and pair them again. There's a slight chance it may work. Otherwise, one of the companies is going to have to release an update to fix it. Maybe kenwoodusa.com already has. Have you checked?

  • F4Help for selection fields not available

    Hello Friends,
    I have created a datasource in Bi7.0 .while creating this i have put selection option X(selection possible) and Selection option 3(EQ & BT) for the three characteristics in the datasource and activated it.
    When i am creating the Infopackage for loading the data to PSA, with in infopackage in Data selection tab, when i am selecting the characteristic value for the above chars, the system says "Datasource does not exist in the source system of version A"
    Why am i not able to select the values here?
    Please let me know friends if you have any idea?
    Thanks
    mv_d

    Hi Friends,
    Does anyone have any idea what could be going wrong in this case?
    Why am i not getting F4 help values in Infopackage?
    Thanks
    mv_d

  • Select Directory 'Not Responding' - bug report

    Hi,
    I was editing a step and realized that I needed to add another search directory.
    After choosing 'Select Directory' and then 'Add...' TestStand appears to lock up.
    Actually it has not really locked up, but as Filemon shows, is iterating through every directory.
    After 15 minutes it finally allowed user interaction and I was able to drill down into the next folder.
    However the response was still sluggish each time I opened up a new folder in my attempt to reach the final directory.
    [I am still trying to get there.]
    So there are times when the Select Directory function gives an abnormal behavior.
    Ronnie
    Message Edited by Believer on 09-29-2009 01:29 PM
    TestStand 4.2.1, LabVIEW 2009, LabWindows/CVI 2009

    Richard,
    No, I wasn't adding C:\ to the list. However, when I 'Add...' a directory, the dialog box begins at C:\Documents and Settings\All Users\Documents\National Instruments, and I then went straight to C:\ in order to then get to Program Files\IVI etc.
    I agree that searches would take awhile if I had selected C:\ but I am simply trying to Add a directory.
    My point was that TestStand should not be searching directories while I am just trying to add a directory to the search path.
    The graphic above shows for sure that TestStand is scanning through directory structures for some reason while I am trying to do this.
    This to me is odd. Why should it scan at this point?
    The Search Subdirectories check box is not valid at this time because I am adding a new directory (see the above graphic).
    As it happens I have not been able to reproduce the behavior I mentioned above - although it has happened to me once before.
    Thanks for your help,
    Ronnie
    TestStand 4.2.1, LabVIEW 2009, LabWindows/CVI 2009

  • Drill down expand and collapse feature not available  Crystal Reports Desig

    Hi,
    Am I right in my understanding that drill down feature opens in a new tab and it cannot be made expand and collapse even using JRC.
    Please advise & thank you
    Selvi

    Hi Slevi,
    You are right with the understanding of the Drill down function. To have a drill down function available the minimum requirement is have at least a single group in the report.
    When we have a group with some underlying data and then when we would like to see data for a particular group, we can see a u201Cmagnifying glassu201D symbol which indicates that there is data for this group and we can use the Drill down function.
    When you drill on a particular group, the data for that group is shown in a new tab.
    I hope this provides some information about the Drill down function used in Crystal Reports.
    Regards,
    Prashant Saduwale.

Maybe you are looking for