Selection of JRE 5 not 6

Our application does work nicely with JRE 5. But not with JRE 6.
This application is started by java web start JNLP and I have put <j2se version="1.5*"/> in JNP so that it can select JRE5 but anyhow JRE 6 is selected and application failed to start.
Can anyone tell/suggest or anyone faced this problem.
Thanks

Ok...
MIght be a third party Safari add on preventing Safari from opening that was compatible with the previous version of Safari but not 5.0.6.
Help here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues

Similar Messages

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

Selection tet -description not getting displayed

Hi,
In abap program, the text for the selection text is not getting displayed. For ex. for field p_matnr which is nothing but mara-matnr, the text name Material number is not getting displayed and instead it shows p_matnr on the selection screen. I have activated the dictionary check box on the selection texts still it is not working. The strange part is the same Selection text 'P_MATNR' displays the text correctly in another report but on this report even if i uncheck and check the dictionary check box it does not display. Has soneone faced this before?
Thanks,
Prem

Hi.,
Try this.,
SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(20) c1 .
PARAMETERS : P_MATNR LIKE MARA-MATNR.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK 1.
INITIALIZATION.
c1 = 'Material Number:'.
hope this helps u.,
Thanks & Regards,
Kiran

Select-options are not destroyed while calling view of used component popup

Hi Friends ,
I'm facing a unique problem. I'm calling a view of a component within another component. the view that I'm calling has some select-options. When I close the popup window ( using close 'X' of popup ) and then try to reopen the popup system give me a dump. I debugged and found that select-options are not destroyed by system and once it tries to create the select-options again it dumps because they are already there.
This is the source code extract of that dump for your reference .
1 method if_wd_select_options~add_selection_field.
2
3   data:
4     lr_table_descr       type ref to cl_abap_tabledescr,
5     lr_struct_descr      type ref to cl_abap_structdescr,
6     lr_value_field_descr type ref to cl_abap_elemdescr,
7     added_field          like line of mt_added_fields,
8     dfies                type dfies,
9     description          type string,
10     complex_restrictions type if_wd_select_options=>t_complex_restrictions.
11
12   field-symbols:
13     <it_result> type index table.
14
15 * check of someone wants to add a field that already exists
16   read table mt_fields
17        with key m_id = i_id
18        transporting no fields.
19   if sy-subrc = 0.
20 *   might be deleted - recreating a field with different setting is of course allowed
21     read table mt_all_removed_fields
22          with key table_line = i_id
23          transporting no fields.
24     if sy-subrc <> 0.
>>>       message x000(00).
26     endif.
27
28 *   remove the existing field in order to avoid duplicates
29     delete table mt_fields with table key m_id = i_id.
30   endif.
I've already tried using REMOVE_ALL_SEL_SCREEN_ITEMS( ) method of interface IF_WD_SELECT_OPTIONS before creating new elements ( select-options ). If any one can help me in this It would really help and I'll appreciate it.
Thanks in advance,
Laeeq

I've sloved the problem

Selection Criteria addition-Not working

Hi!
I have this report wherein I need to add two fields VBAP-Kunnr and knvv-konda in the selection screen so that I can do my drill down or search criteria based upon these two selections also apart from the existing ones, but unfortunately I am unable to get throiugh this and somehow putting this two selections in the selection criteria its not taking any effect or its just actinga dummy selection and I am unale to drill down my report based upon those. Can anyone have a look and let me know what could be the problem please. Help would be highly appreciated.
Thanks
*& Include ZSD_PFGENERATETOP Report ZSD_PFGENERATE
REPORT zsd_pfgenerate LINE-SIZE 170 LINE-COUNT 65.
TABLES: lips, likp, vbap, vbak, vbrp, vbpa, vbrk.
CONSTANTS: cns_vgtyp TYPE vbrp-vgtyp VALUE 'J',
cns_intyp TYPE vbrk-vbtyp VALUE 'M',
cns_vkorg TYPE vbak-vkorg VALUE 'CA01',
cns_vkorg_US type vbak-vkorg value 'US01', "DEVK903521
cns_parsh TYPE vbpa-parvw VALUE 'WE',
cns_parsp TYPE vbpa-parvw VALUE 'AG',
cns_parre type vbpa-parvw value 'RE', "bill-to
cns_auzwp TYPE vbak-auart VALUE 'ZWP',
cns_auzct TYPE vbak-auart VALUE 'ZCT',
cns_auzif TYPE vbak-auart VALUE 'ZIF',
cns_auztm TYPE vbak-auart VALUE 'ZTM',
cns_fkff TYPE vbrk-fkart VALUE 'ZFF5',
cns_fkos TYPE vbrk-fkart VALUE 'ZOF5',
cns_upd(1) TYPE c VALUE 'S',
cns_mode(1) TYPE c VALUE 'N'.
Internal Tables and Work Areas
DATA: BEGIN OF it_vbpos OCCURS 0,
werks TYPE vbap-werks,
audat TYPE vbak-audat,
auart TYPE vbak-auart,
kunag TYPE vbak-kunnr,
name1_ag TYPE kna1-name1,
kunsh TYPE likp-kunnr,
name1_sh TYPE kna1-name1,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
vbdel TYPE likp-vbeln,
psdel TYPE lips-posnr,
kunre type kunre, "Bill-to Party
name1_re type kna1-name1, "Bill-to Party Name
END OF it_vbpos,
BEGIN OF it_vbpos_temp OCCURS 0,
vgbel TYPE lips-vgbel,
vgpos TYPE lips-vgpos,
vbeln TYPE vbak-vbeln,
posnr TYPE vbap-posnr,
END OF it_vbpos_temp,
BEGIN OF it_report OCCURS 0,
werks TYPE vbap-werks,
vbeln TYPE vbak-vbeln,
vbdel TYPE likp-vbeln,
audat TYPE vbak-audat,
auart TYPE vbak-auart,
name1_ag TYPE kna1-name1,
name1_sh TYPE kna1-name1,
name1_re type kna1-name1, "Bill-to Party Name
mark(1) TYPE c,
END OF it_report,
BEGIN OF it_vbeln OCCURS 0,
vbeln TYPE vbak-vbeln,
END OF it_vbeln,
wa_vbeln LIKE LINE OF it_vbeln,
wa_vbpos LIKE LINE OF it_vbpos,
wa_report LIKE LINE OF it_report,
wa_sel LIKE LINE OF it_report.
DATA: it_vbrp type table of vbrp,
it_vbrk type table of vbrk.
BDC Variables
DATA: BEGIN OF bdc_tab OCCURS 0.
INCLUDE STRUCTURE bdcdata.
DATA: END OF bdc_tab.
DATA: wa_bdc LIKE LINE OF bdc_tab,
it_bdcmess TYPE TABLE OF bdcmsgcoll.
*& Selection-Screen definition
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-002.
PARAMETERS: p_rdff TYPE c RADIOBUTTON GROUP rad1 DEFAULT 'X',
p_rdos TYPE c RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK block2.
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-000.
SELECT-OPTIONS: s_werks FOR vbap-werks OBLIGATORY NO INTERVALS,
s_auart FOR vbak-auart,
s_kunag FOR vbak-kunnr, "Sold-to Party
s_kunnr FOR likp-kunnr, "Ship-to Party
s_kunre for vbak-kunnr, "Bill to Party
s_vdatu FOR vbak-vdatu OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block0.
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-001.
PARAMETERS: p_vgbel TYPE vbak-vgbel.
SELECTION-SCREEN END OF BLOCK block1.
selection-screen begin of block block3 with frame title text-003.
parameters: p_billed RADIOBUTTON GROUP r1,
p_delvd RADIOBUTTON GROUP r1 default 'X',
p_all RADIOBUTTON GROUP r1.
selection-screen end of block block3.
*& Include ZSD_PFGENERATEE01
START-OF-SELECTION.
PERFORM read_report.
END-OF-SELECTION.
SET PF-STATUS 'STAT1000'.
IF it_vbpos[] IS INITIAL.
MESSAGE s999(z001) WITH 'No Data Selected for this criteria'.
ELSE.
PERFORM show_report.
ENDIF.
*& List Events
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'SELE'.
LOOP AT it_report INTO wa_report.
wa_report-mark = 'X'.
MODIFY it_report FROM wa_report.
ENDLOOP.
PERFORM show_report.
WHEN 'DSEL'.
LOOP AT it_report INTO wa_report.
wa_report-mark = ''.
MODIFY it_report FROM wa_report.
ENDLOOP.
PERFORM show_report.
ENDCASE.
AT LINE-SELECTION.
DO.
READ LINE sy-index FIELD VALUE wa_report-mark wa_report-vbeln
wa_report-vbdel.
IF sy-subrc NE 0.
EXIT.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_report-vbeln
IMPORTING
output = wa_report-vbeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_report-vbdel
IMPORTING
output = wa_report-vbdel.
READ TABLE it_report INTO wa_sel
WITH KEY vbeln = wa_report-vbeln.
IF sy-subrc EQ 0.
wa_sel-mark = wa_report-mark.
MODIFY it_report FROM wa_sel INDEX sy-tabix.
ENDIF.
ENDIF.
ENDDO.
REFRESH: it_vbeln.
LOOP AT it_report INTO wa_report WHERE mark EQ 'X'.
CASE 'X'.
WHEN p_rdff.
wa_vbeln = wa_report-vbdel.
WHEN p_rdos.
wa_vbeln = wa_report-vbeln.
ENDCASE.
APPEND wa_vbeln TO it_vbeln.
ENDLOOP.
SORT it_vbeln BY vbeln.
DELETE ADJACENT DUPLICATES FROM it_vbeln.
IF NOT it_vbeln[] IS INITIAL.
PERFORM process_vf01.
ENDIF.
*& Include ZSD_PFGENERATEF01
*& Form read_report
Routine to read applicable orders from database
FORM read_report.
DATA: lwa_lips TYPE lips,
lc_vbeln TYPE vbrk-vbeln.
Retrieve sales orders based on selection criteria where billing doc has not been
created for the delivery yet
REFRESH: it_vbeln, it_vbpos, it_report.
Select into table based on Onsite/Fixed Facility
CASE 'X'.
WHEN p_rdff.
changed for performance reasons (i.e. time-out)
k~vgbel is not in it_vbpos but was in select statment ?
SELECT vbap~werks vbak~audat vbak~auart vbak~kunnr AS kunag
vbak~vbeln vbap~posnr
INTO CORRESPONDING FIELDS OF TABLE it_vbpos
FROM vbak INNER JOIN vbap
ON vbak~mandt = vbap~mandt
AND vbak~vbeln = vbap~vbeln
WHERE vbap~werks IN s_werks
AND vbak~vdatu IN s_vdatu
AND vbak~vkorg in (cns_vkorg,cns_vkorg_US)
AND vbap~oid_ship IN s_kunnr
AND vbak~kunnr IN s_kunag
AND vbak~auart IN s_auart
AND ( vbak~auart = 'ZWP' or vbak~auart = 'ZIF' or
vbak~auart = 'ZCT' or vbak~auart = 'ZTM' or
vbak~auart = 'ZOIL' ).
IF SY-SUBRC = 0.
SELECT vgbel vgpos vbeln posnr FROM lips
INTO CORRESPONDING FIELDS OF TABLE it_vbpos_temp
FOR ALL ENTRIES IN it_vbpos
WHERE vgbel = it_vbpos-vbeln
AND vgpos = it_vbpos-posnr
%_hints oracle 'index ("LIPS" "LIPS~Z01")'.
SORT it_vbpos_temp by vgbel vgpos.
LOOP AT it_vbpos.
READ TABLE it_vbpos_temp
WITH KEY vgbel = it_vbpos-vbeln vgpos = it_vbpos-posnr
BINARY SEARCH.
IF SY-SUBRC = 0.
it_vbpos-vbdel = it_vbpos_temp-vbeln.
it_vbpos-psdel = it_vbpos_temp-posnr.
modify it_vbpos.
ENDIF.
ENDLOOP.
ENDIF.
WHEN p_rdos.
SELECT k~vbeln p~posnr k~kunnr AS kunag k~audat k~auart p~werks k~vgbel
INTO CORRESPONDING FIELDS OF TABLE it_vbpos
FROM vbak AS k INNER JOIN vbap AS p ON k~vbeln = p~vbeln
WHERE p~werks IN s_werks AND k~vdatu IN s_vdatu AND
k~vkorg in (cns_vkorg,cns_vkorg_US) AND "DEVK903521
k~vgbel EQ p_vgbel AND
k~kunnr IN s_kunag AND k~auart IN s_auart AND
p~oid_ship IN s_kunnr.
ENDCASE.
Determine if delivery has been billed out, if not can create PF Invoice - CHANGED
LOOP AT it_vbpos INTO wa_vbpos.
Check Ship-to in
SELECT SINGLE kunnr INTO wa_vbpos-kunsh FROM vbpa
WHERE parvw EQ cns_parsh AND vbeln EQ wa_vbpos-vbeln.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
Check for Bill-to
select single kunnr into wa_vbpos-kunre from vbpa
where parvw eq cns_parre and vbeln eq wa_vbpos-vbeln
and kunnr in s_kunre.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
Get Partner Texts
SELECT SINGLE name1 INTO wa_vbpos-name1_ag FROM kna1
WHERE kunnr EQ wa_vbpos-kunag.
SELECT SINGLE name1 INTO wa_vbpos-name1_sh FROM kna1
WHERE kunnr EQ wa_vbpos-kunsh.
SELECT SINGLE name1 INTO wa_vbpos-name1_re FROM kna1
WHERE kunnr EQ wa_vbpos-kunre.
CASE 'X'.
WHEN p_rdff.
IF p_delvd = 'X'.
optimized for performance reasons i.e. time-out
Check if delivery has been billed out
SELECT SINGLE k~vbeln INTO lc_vbeln
FROM vbrp AS p INNER JOIN vbrk AS k ON p~vbeln = k~vbeln
WHERE p~vgtyp EQ cns_vgtyp AND p~vgbel EQ wa_vbpos-vbdel AND
p~vgpos EQ wa_vbpos-psdel AND k~vbtyp EQ cns_intyp AND
k~fksto NE 'X'.
refresh: it_vbrp, it_vbrk.
select vbeln from vbrp
into corresponding fields of table it_vbrp
where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
and vgpos = wa_vbpos-psdel
%_hints oracle 'index ("VBRP" "VBRP~Z01")'.
if sy-subrc = 0.
sort it_vbrp by vbeln.
delete adjacent duplicates from it_vbrp comparing vbeln.
select vbeln from vbrk
into corresponding fields of table it_vbrk
for all entries in it_vbrp
where vbeln = it_vbrp-vbeln
and vbtyp = cns_intyp and fksto 'X'.
IF sy-subrc EQ 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
endif.
ELSEIF p_billed = 'X'.
Check if delivery hasn't been billed out
SELECT SINGLE k~vbeln INTO lc_vbeln
FROM vbrp AS p INNER JOIN vbrk AS k ON p~vbeln = k~vbeln
WHERE p~vgtyp EQ cns_vgtyp AND p~vgbel EQ wa_vbpos-vbdel AND
p~vgpos EQ wa_vbpos-psdel AND k~vbtyp EQ cns_intyp AND
k~fksto NE 'X'.
refresh: it_vbrp, it_vbrk.
select vbeln from vbrp
into corresponding fields of table it_vbrp
where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
and vgpos = wa_vbpos-psdel
%_hints oracle 'index ("VBRP" "VBRP~Z01")'.
if sy-subrc = 0.
sort it_vbrp by vbeln.
delete adjacent duplicates from it_vbrp comparing vbeln.
select vbeln from vbrk
into corresponding fields of table it_vbrk
for all entries in it_vbrp
where vbeln = it_vbrp-vbeln
and vbtyp = cns_intyp and fksto 'X'.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
endif.
ENDIF.
WHEN p_rdos.
IF p_delvd = 'X'.
Check if order has been billed out
SELECT SINGLE * FROM vbrp
WHERE vbeln EQ wa_vbpos-vbeln AND
vgpos EQ wa_vbpos-posnr.
IF sy-subrc EQ 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
ELSEIF p_billed = 'X'.
Check if delivery hasn't been billed out
SELECT SINGLE k~vbeln INTO lc_vbeln
FROM vbrp AS p INNER JOIN vbrk AS k ON pvbeln = kvbeln
WHERE pvgtyp EQ cns_vgtyp AND pvgbel EQ wa_vbpos-vbdel AND
pvgpos EQ wa_vbpos-psdel AND kvbtyp EQ cns_intyp AND
k~fksto NE 'X'.
refresh: it_vbrp, it_vbrk.
select vbeln from vbrp
into corresponding fields of table it_vbrp
where vgtyp = cns_vgtyp and vgbel = wa_vbpos-vbdel
and vgpos = wa_vbpos-psdel
%_hints oracle 'index ("VBRP" "VBRP~Z01")'.
if sy-subrc = 0.
sort it_vbrp by vbeln.
delete adjacent duplicates from it_vbrp comparing vbeln.
select vbeln from vbrk
into corresponding fields of table it_vbrk
for all entries in it_vbrp
where vbeln = it_vbrp-vbeln
and vbtyp = cns_intyp and fksto 'X'.
IF sy-subrc NE 0.
DELETE TABLE it_vbpos FROM wa_vbpos.
CONTINUE.
ENDIF.
endif.
ENDIF.
ENDCASE.
MOVE-CORRESPONDING wa_vbpos TO wa_report.
APPEND wa_report TO it_report.
MODIFY it_vbpos FROM wa_vbpos.
ENDLOOP.
if 'onsite field summary', then process by release sales orders
IF p_rdos = 'X'.
sort it_report by vbeln.
delete adjacent duplicates from it_report comparing vbeln.
else.
SORT it_report BY werks name1_ag name1_sh vbeln.
DELETE ADJACENT DUPLICATES FROM it_report.
endif.
SORT it_report BY name1_sh werks name1_ag vbeln.
ENDFORM. " read_report
*& Form process_vf01
Call transaction VF01 and fill screen table with order values
FORM process_vf01.
DATA: ln_index(2) TYPE n,
lc_field(20) TYPE c,
lc_fkart TYPE vbrk-fkart,
li_lines TYPE i,
lc_msgtxt(99) TYPE c,
lwa_bdcoptions TYPE ctu_params,
lwa_mess LIKE LINE OF it_bdcmess.
REFRESH: it_bdcmess.
lwa_bdcoptions-dismode = cns_mode.
lwa_bdcoptions-updmode = cns_upd.
CASE 'X'.
WHEN p_rdff.
lc_fkart = cns_fkff.
WHEN p_rdos.
lc_fkart = cns_fkos.
ENDCASE.
REFRESH: bdc_tab.
PERFORM update_bdc USING: 'X' 'SAPMV60A' '0102',
' ' 'BDC_CURSOR' 'RV60A-FKART',
' ' 'RV60A-FKART' lc_fkart,
' ' 'BDC_OKCODE' '/00'.
LOOP AT it_vbeln INTO wa_vbeln.
ln_index = sy-tabix.
Up to the second delivery of the BDC add the Delivery to the screen, after that click the More Documents for every entry. logic changed for DEVK902353
CASE ln_index.
WHEN 1.
CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln.
WHEN 2 OR 3.
IF p_rdos 'X'.
CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln,
'X' 'SAPMV60A' '0102',
' ' 'BDC_OKCODE' 'FKAN'..
ELSE.
CONCATENATE 'KOMFK-VBELN' '(' ln_index ')' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln.
ENDIF.
WHEN OTHERS.
If p_rdos 'X'.
CONCATENATE 'KOMFK-VBELN' '(2)' INTO lc_field.
PERFORM update_bdc USING: ' ' lc_field wa_vbeln,
'X' 'SAPMV60A' '0102',
' ' 'BDC_OKCODE' 'FKAN'.
endif.
ENDCASE.
ENDLOOP.
VF01 will go to a different screen if only one line selected
DESCRIBE TABLE it_vbeln LINES li_lines.
IF li_lines EQ 1.
PERFORM update_bdc USING: 'X' 'SAPMV60A' '0104',
' ' 'BDC_OKCODE' '=SICH'.
ELSE.
PERFORM update_bdc USING: 'X' 'SAPMV60A' '0102',
' ' 'BDC_OKCODE' '=SICH'.
ENDIF.
CALL TRANSACTION 'VF01' USING bdc_tab OPTIONS FROM lwa_bdcoptions
MESSAGES INTO it_bdcmess.
WRITE: / 'BDC Messages:'.
SKIP.
LOOP AT it_bdcmess INTO lwa_mess.
CALL FUNCTION 'RH_MESSAGE_GET'
EXPORTING
arbgb = 'VF'
msgnr = lwa_mess-msgnr
msgv1 = lwa_mess-msgv1
msgv2 = lwa_mess-msgv2
msgv3 = lwa_mess-msgv3
msgv4 = lwa_mess-msgv4
IMPORTING
msgtext = lc_msgtxt
EXCEPTIONS
message_not_found = 1
OTHERS = 2.
WRITE: /5 lc_msgtxt.
ENDLOOP.
ENDFORM. " process_vf01
form update_bdc *
subroutine to add the data to the bdc table for trans. vf01 *
FORM update_bdc USING dynpro field content.
CLEAR bdc_tab.
IF dynpro EQ 'X'.
bdc_tab-program = field.
bdc_tab-dynpro = content.
bdc_tab-dynbegin = 'X'.
ELSE.
bdc_tab-fnam = field.
bdc_tab-fval = content.
ENDIF.
APPEND bdc_tab.
ENDFORM. "UPDATE_BDC
*& Form show_report
Report to Display Available Orders on Screen
FORM show_report .
DATA: l_idx TYPE i.
WRITE: / 'Available Orders/Deliveries for Plant:'.
LOOP AT s_werks.
WRITE: s_werks-low.
ENDLOOP.
SKIP.
FORMAT INTENSIFIED ON COLOR COL_HEADING.
WRITE: /5 text-h01, text-h02.
CASE 'X'.
WHEN p_rdff.
WRITE: text-h06.
ENDCASE.
WRITE: text-h03, text-h04, text-h05, text-h07,
/ sy-uline.
FORMAT INTENSIFIED OFF COLOR OFF.
l_idx = 0.
LOOP AT it_report INTO wa_report.
IF l_idx EQ 0.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
l_idx = 1.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
l_idx = 0.
ENDIF.
WRITE: / wa_report-mark AS CHECKBOX,
wa_report-auart UNDER text-h01,
wa_report-vbeln UNDER text-h02.
CASE 'X'.
WHEN p_rdff.
WRITE: wa_report-vbdel UNDER text-h06.
ENDCASE.
WRITE: wa_report-audat UNDER text-h03,
wa_report-name1_ag UNDER text-h04,
wa_report-name1_sh UNDER text-h05,
wa_report-name1_re under text-h07.
HIDE: wa_report-mark, wa_report-vbeln, wa_report-vbdel.
ENDLOOP.
ENDFORM. " show_report
Thanks for your kind help.
Aarav.

Hi, Anne-Marie;
You may be running into a common issue that is docuemented here:
[SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
Regards,
Jonathan
Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

Selection criteria are not applied to summary fields on group footers.

I wonder if anyone can help me with this problem. I am using Crystal reports version 11.2, and my data source is a Sql Server view.
The records on the view have a date field, and I have selected all records within a given date range in "Selection Formulas".
The records are then grouped, and the Crystal summary facility used to summarise number fields on the group footers.
So for example, if my view contains four records, one with field "amount" = 2, one with field "amount" = 8, one with field "amount" = 6, one with field "amount" = 3, but only the first two records are within the valid date range, you would expect to see the first two records listed out at detail level, then field "amount" summarised at group level, with a summarised value of 10.
ie ....                record1                      2
                       record2                      8
                       group level total         10
This works fine when I run the report using Crystal's "print preview" facility. However, when the report is run from within an application written in C#.NET, the selection criteria are not applied to the summary field, so you get ..
                       record1                      2
                       record2                      8
                       group level total          19
I tried putting the date selection criteria at both record and group level, but that did not work.
I googled the problem and found an article explaining that Crystal first performs the record-level selection, then it creates the groups and totals up any summary fields, and only then does it apply the group-level selection criteria, which can lead to problems like the one I have described above. However, since I have put my date selection criteria at both record and group level, I do not understand why I still get the problem.
In one report I got round this problem by creating a formula that returned zero if the record date was outside of the valid date range, and returned the number field to be summarised if the date was valid, then summarising that formula, instead of summarising the number field directly.
In other reports I created one formula to set a shared variable as zero, then another formula to accumulate it at detail record level, then another formula to display the variable at the group footer. In other words, I did not bother with the Crystal summary facility at all, but created my own summary facility.
While googling the problem to see what other people did in this situation, I noticed that most fixes used variations of the "shared variables and formulae" fix to get round the problem.
The problem is that I have lots of complex reports and it will take ages to replace the summarised fields with shared variables and formulae. The reports were initially tested with "Print Preview" so we did not notice this problem until the C#.Net application was ready to use them. And I can't believe that you are simply meant to ignore the summary facility and re-invent the wheel by doing it all manually.
Please tell me that there is something simple that I have been doing wrong!!! If I have not given enough information for you to answer, please let me know.
Thanks,
Anne-Marie

Hi, Anne-Marie;
You may be running into a common issue that is docuemented here:
[SelectionFormula|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233303334333833393335%7D.do]
Regards,
Jonathan
Edited by: Jonathan Parminter on Mar 16, 2009 8:03 AM

Select() function is not working properly in solaris 10.

Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.
Thanks a lot.
Regards,
Srikanth.

haisrig wrote:
Hi ,
We are facing an issue with select() in Solaris 10. we had written a sample program to this issue.
Program name :- sel.cpp
int main()
struct timeval sleeptime;
sleeptime.tv_sec = 60;
printf("1\n");
select(0,NULL,NULL,NULL,&sleeptime);
printf("2");
return 0;
When i run this program in Solaris 9, its printing 1 and after one minute its printing 2.
When i run this program on Solaris 10, its printing 1 and 2 without waiting for 60 seconds.
When i tried to print tv_usec, its printing as 0 in solaris 9 and some garbage values in solaris 10.
I think because of that the above select function is not working properly in solaris 10.
Why the tv_usec is not taking 0 as default values in Solaris 10?
We are using our legacy code for past 20 years. So, before going to do any changes we are trying to find why this happenig like this.Hi
It sounds to me that you've been lucky for 20 years then.
Local POD variables on the stack that aren't explicitly initialized can contain any value. Here's what I see in your app with dbx
(dbx) run
Running: sel
stopped in main at line 9 in file "sel.cpp"
    9      sleeptime.tv_sec = 60;
(dbx) print sleeptime
sleeptime = {
    tv_sec = -4198732
    tv_usec = 0
}That's on a Solaris 10 SPARC machine. If I try it on a Solaris 10 x86 box then I get
(dbx) print sleeptime
sleeptime = {
tv_sec = -830490588
tv_usec = 134510556
and I see the behaviour that you describe.
Paul

Error: Selected disk does not exist (21) Module-SRE-700

Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...

Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

"Selected disk does not exist" after install using Unetbootin

Hello, I downloaed core iso file and use unetbootin to created a bootable usb disk, then I booted from the usb disk, installed the system as usual, then I rebooted the machine, the grub menu is shown, but when I selected archlinux, it shows:
Booting 'Arch Linux'
root (hd1,0)
Error 21: Selected disk does not exist
Press any key to continue...
if I press any key, it goes to grub menu again.
I noticed that when I installed the system, the usb disk is /dev/sda1, the harddisk is /dev/sdb1, /dev/sdb2 ... (several partitions), so I guess there is a problem here, and when I reboot, harddisk becomes /dev/sda1 sda2... so the system cannot find /dev/sdb1 2...
I read a post about unetbootin, it did not mention anything about the problem, so I think there is no problem install using unetbootin...

Try to change (hd1,0) pour (hd0,0). GRUB considers the disk from where he was loaded as hd0.
If you want more infos check with http://sourceforge.net/projects/bootinfoscript/
and post it's output.

I am trying to delete pages from a PDF file. I opened the bookmarks, selected the pages to delete and choose Edit Delete. The selected pages are not deleted. Note: I have to open the file using a passport provided by an external party.

I am trying to delete pages from a PDF file. I opened the bookmarks in the PDF file, selected the pages to delete and choose Edit > Delete. The selected pages are not deleted. Note: I have to open the file using a passport provided by an external party.

Resolved

When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased music not on this iphone" it tells me "All of your a

When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased > music > not on this iphone" it tells me "All of your available music has been downloaded to this device." However, my purchases are not yet downloaded to the iphone and not available to download. If I go to "purchased > music > all > recent purchases" it will show me the purchases that were most recent the last time I synced my phone, but not the purchases since then.
Any thoughts on how I can remedy this and make all of my purchased music available on my phone without requiring syncing?
iPhone 4

So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

Selected subpicture is not shown on certain buttons

I have various menus that were created in Photoshop. Most of them have a home button in the left top corner and a next button in the right top corner. Both buttons are almost inside the title save area. For all buttons I'm using one colored underlines as the selected subpicture. When I click the show subpicture command in the design menu view I can see all the subpictures. If I preview the menu the selected subpicture is not shown for the two top bottoms when they are selected, but they are shown for all the others. I don't understand it. The buttons look the same in Photoshop. Does any body have an idea what can cause this problem?
Marcus

I did some more testing with minimal menus and got very wired results:
I found out that the cause is the position of the button. I have a PAL widescreen menu. It is 576 pixel high. If the button with the underline is in the top ~120 pixel the selected subpicture is not shown. If I move the button in the 120 to 220 pixel range the line is shown thinner and below about 220 pixel the line is shown when selected. If I move the button up again and preview the subpicture is not shown again.
Now, if i move the subpicture from under the text left or right of the text, first it is not shown either, but if i move the whole button below the critial position and then up again it is suddendy show. Still in same cases the line was shown thinner.
I moved the selected line from next to the text back to under the text while the button is in the upper range and -bang- the subpicture is not shown again. I did all those changes in Encore design view.
Marcus
Show Selected subpictures (the underline is also shown when it is under the text):
Button selected with subpicture below of button text:
Button selected with subpicture left of button text:
PSD layers (comment: the highlight or the return button is a filled pixel layer, the others are shape layers)

How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

Last night, when I played my playlist songs with iTunes Genius, my iTunes, with one of my playlists selected, and set on "Shuffle On," "Genius Shuffle On, "Genius On," "Match On," and "Play," played selections from all of my songs in my playlist. Today, my iTunes Genius went back to the same problem it was giving me before last night. My iTunes Genius has been playing selections from just a few of my playlist albums. How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

No backup is a huge mistake.
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store ... - Apple - Support

The parameter name [...] in the query's selection criteria does not match..

Hi all,
I'm trying to pratice EJB 3 (which I learnt at school), with JSF and JPA, but i'm really stuck with that error :
Exception [TOPLINK-6094] (Oracle TopLink Essentials - 2.0 (Build b41-beta2 (03/30/2007))): oracle.toplink.essentials.exceptions.QueryException
Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query.
Query: ReadAllQuery(oracle.datamodel.Employees)
I will try to explain clearly what i'm trying to do :
In fact, i'm following that tutorial :
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
But, as i didn't have any oracle database, but had a mysql one on my machine, i decided to use that DB instead of the the oracle DB... So i created a set of example data (to replace the oracle example set) ...so i created the tables EMPLOYEE, and DEPARTMENT... with the correct relations (FK) and PK)
All was ok, i choose my "mysql-connector" (jdbc) instead of the oracle jdbc connector... so i could follow the tutorial.
My problem appears at the step 12 (of "Creating a Master-Detail JavaServer Faces Page"), when i run the file deptEmployees.jspx.
The information of the first departement displays correctly :
departmentID 1
departmentName ... etc
but it can't display the employees belonging to that department !
the error is :
JBO-29000: Exception Description: The parameter name [departmentID] in the query's selection criteria does not match any parameter name defined in the query. Query: ReadAllQuery(oracle.datamodel.Employees)
I think i understand what is the problem... I think that the query in charge of gathering the data of a specific departement need a parameter, but couldn't find it. But i don't know why :-/ I have tried many things and read the topics talking about that error... but it didn't solved the problem. I don't know anymore where to investigate.
I have created a Zip file of my work (it's an EJB/JSF Application.. with jdev 10.1.3.3.0)
(available here : http://dl.free.fr/mQ5esdQuS/EJB_appli.zip)
I would be glad if someone could take few minutes to help me.
Thank you in advance,
Thomas B (student)

Hello,
This is a common mistake. Java string comparisons in TopLink are case sensitive by default, and since column names are uppercase when defaulted, TopLink cannot find the "departmentID" column name. In this case, Departments ID column defaults to "DEPARTMENTID" as required by the JPA specification.
Either change Departments id annotation to     @Id
    @Column(name="departmentID", nullable = false)
    private Integer departmentID;or change Employees' ManytoOne annotation to:
    @ManyToOne
    @JoinColumn(name = "departmentID", referencedColumnName = "DEPARTMENTID")
    private Departments departments;Best Regards,
Chris

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections. Does anyone know their way around this obstacle? Thanks!

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

Select query is not working in BDC Program

Hi,
I am working in BDC for update valuation class for T-code mm01.Actually In this BDC i am using two recoding based on material type.
i am using two internal table : I_DATA and ITAB
Use I_DATA to hold excle data in which material No, plant , valuation type , valuation No. and ITAB for material No, material type Only.
So, i am fetching material Type ( MARA-MTART ) through select query. But Select query is not working. and also i did check MARA table according that Material Number then material no. exit in Mara Table.
Note : at run time I_DATA have 1 row but ITAB have 0 row ....
DATA: BEGIN OF I_DATA OCCURS 0,
MATNR TYPE MARA-MATNR,
WERKS TYPE MARC-WERKS,
BWTAR TYPE RMMG1-BWTAR,
VERPR TYPE BMMH1-VERPR,
BKLAS TYPE MBEW-BKLAS,
STATUS TYPE C,
END OF I_DATA.
DATA : BEGIN OF ITAB OCCURS 0,
MATNR LIKE MARA-MATNR,
MTART LIKE MARA-MTART,
END OF ITAB.
Loop at I_DATA.
select matnr mtart from mara into table itab where matnr = I_DATA-matnr.
endloop.
Guide me..........

If you use your
Loop at I_DATA.
select matnr mtart from mara into table itab
    where matnr = I_DATA-matnr.
endloop.
At end of loop, itab will only contain the result of the last select, so use a
Loop at I_DATA.
select matnr mtart from mara APPENDING table itab
    where matnr = I_DATA-matnr.
endloop.
better
if I_DATA[] is not initial.
select matnr mtart from mara into table itab
    FOR ALL ENTRIES IN i_data where matnr = i_data-matnr.
endif.
Some Remarks
- If actually required (where does I_DATA come from, is it an external format, you need the internal value to use in SELECT statement), check via SE11 the correct [conversion exit|http://help.sap.com/saphelp_nw04/helpdata/en/35/26b217afab52b9e10000009b38f974/content.htm] associated with domain MATNR (Is it truly ALPHA, and not something like MATN1, so [CONVERSION_EXIT_MATN1_INPUT|http://www.sdn.sap.com/irj/scn/advancedsearch?query=conversion_exit_matn1_input])
- You could try to use BAPI like [BAPI_MATERIAL_SAVEDATA|http://www.sdn.sap.com/irj/scn/advancedsearch?query=bapi_material_savedata] and not BDC
Regards,
Raymond

Selection of JRE 5 not 6

Similar Messages

Maybe you are looking for