Selection of material if no charac value selected or specific charc value

Hi
In Variant configuration, in dependency rule, i have to make for the following requirement:
CHARACTER     CHARACTER VALUE
ABC                   YES
                          NO
Mateiral X has to be selected if CHARACTER VALUE NO selected or if no one character is selected(either YES or NO)
Means only for value YES material should not be selected, otherwise it can be selected for NO and null value.
How to set rule for this in selection condition,BOM assignment.

Dear,
Best and simple way is make value NO as default value for charecter, write selection condition as below in the component where it should be selected if no or null
ABC = 'NO'
i hope this is the best way
one more way which is complicated way by defining a variant table.
Edited by: Rajesha Vittal on Jan 4, 2008 2:05 PM

Similar Messages

Compares two tables S780 and S720 by material , Print the Difference value

Hi abapers,
Report which compares the two tables S780 and S720 by material
the Statistic currency value of these two tables if show the differences
the report should display only Diffrece value:
The selection should be by
Revenue country, Salesorganisation , month and version
output like this
Material Value S720 / Value S780 / currency difference should be print out.
Regards
Raj

Hi
Use join or for all entries
then move the records into a final table
loop at itab
then get the difference.
modify the itab by transporting the difference.
Regards
Shiva

How to select a specific column in a bean method?

Hey everyone,
I'm trying to select a specific column in my adf table so i can hightlight the ones i can after, with a method bean that does a match from another table. I'm using JDeveloper 12.1.2.0.0.
Here's my table at the moment (its a static list that Timo and Alejandro helped me create, thanks to them again!):
<af:table value="#{bindings.Anos1.collectionModel}" var="row"
                                                          rows="#{bindings.Anos1.rangeSize}"
                                                          emptyText="#{bindings.Anos1.viewable ? 'No data to display.' : 'Access Denied.'}"
                                                          rowBandingInterval="0" fetchSize="#{bindings.Anos1.rangeSize}"
                                                          filterModel="#{bindings.Anos1Query.queryDescriptor}"
                                                          queryListener="#{bindings.Anos1Query.processQuery}"
                                                          filterVisible="false" varStatus="vs" id="t5"
                                                          styleClass="AFStretchWidth" columnSelection="multiple"
                                                          inlineStyle="max-width:100%;" columnStretching="multiple"
                                                          columnSelectionListener="#{ControlBean.onAnoColumnSelect}"
                                                          disableColumnReordering="true"
                                                          binding="#{ControlBean.dimAnos}">
                                                    <af:column sortProperty="#{bindings.Anos1.hints.A2011.name}"
                                                               filterable="true" sortable="false"
                                                               headerText="2011"
                                                               id="c54" width="16%">
                                                        <af:outputText value="#{row.A2011}"
                                                                       shortDesc="#{bindings.Anos1.hints.A2011.tooltip}"
                                                                       id="ot54">
                                                            <af:convertNumber groupingUsed="false"
                                                                              pattern="#{bindings.Anos1.hints.A2011.format}"/>
                                                        </af:outputText>
                                                    </af:column>
                                                    <af:column sortProperty="#{bindings.Anos1.hints.A2012.name}"
                                                               filterable="true" sortable="false"
                                                               headerText="2012"
                                                               id="c55" width="16%">
                                                        <af:outputText value="#{row.A2012}"
                                                                       shortDesc="#{bindings.Anos1.hints.A2012.tooltip}"
                                                                       id="ot55">
                                                            <af:convertNumber groupingUsed="false"
                                                                              pattern="#{bindings.Anos1.hints.A2012.format}"/>
                                                        </af:outputText>
                                                    </af:column>
                                                    <af:column sortProperty="#{bindings.Anos1.hints.A2013.name}"
                                                               filterable="true" sortable="false"
                                                               headerText="2013"
                                                               id="c56" width="16%">
                                                        <af:outputText value="#{row.A2013}"
                                                                       shortDesc="#{bindings.Anos1.hints.A2013.tooltip}"
                                                                       id="ot56">
                                                            <af:convertNumber groupingUsed="false"
                                                                              pattern="#{bindings.Anos1.hints.A2013.format}"/>
                                                        </af:outputText>
                                                    </af:column>
                                                </af:table>
I've deleted some of the columns because they are all equal and by doing so, you have less problems in reading it.
In my method i have a matchEm but i'm trying to select a column by using this line:
        dimAnos.setColumnSelection("A2012");
dimAnos is the binding for my table Anos (Years in Portuguese). I even tried another values fro the columnSelection but i couldn't make it selected. Am i doing anything wrong?
Please help me or give me an idea of how can i do this.
Regards,
Frederico.

Hi Frederico,
The method setColumnSelection is meant to set whether your table supports column selection or not. It doesn't select the column. In order to select the column, you need to set the column attribute Selected to true. So I don't know if its an option for you but you can create a binding to all the columns you have in you bean, and then call the method A2012.setSelected(true), and then add a partial target to the table to re render it and show the selected column.
Hope this helps

Auto populate Infopath 2013 fields after selecting a specific dropdown option.

Auto populate Infopath 2013 fields after selecting a specific dropdown option.
Hi.
I have a Sharepoint 2013 list with three fields. Code, Section and Sub Section.
I would like to be able to have the form autopopulate the Section and Sub Section fields when a value for code is entered.
How would I go about this please?
Thanks
Jon

Hi JonMorgan,
Based on your description, my understanding is that you want to achieve that the second dropdown gets populated depending on what the first dropdown is set to.
To achieve your requirement, creating cascading dropdown fields with InfoPath.
Please refer to the following links about cascade drop down in InfoPath form:
http://msreddysharepoint.blogspot.in/2012/12/infopath-2013-web-browser-creating.html
http://www.pointbeyond.com/2011/11/20/cascading-dropdowns-in-infopath-2010/
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Transaction SE16: Field selection (User-Specific Settings) is NOT working for ALL tables

Hi Guru’s,
I have an issue in Transaction SE16, Field selection (User-Specific Settings) is NOT working in Tables (ALL tables).
Following is the screenshot attached for your kind reference,
That is in the initial screen of transaction SE16 if I choose Filed Name or Filed Label only the technical details (Field Names) are appearing and not the descriptions like Client, Purchasing Doc, and Company Code Doc. Category Document Type etc…
Right now I am using ECC6 and EHP7 SAP system.
Please help me to resolve this issue by implementing any OSS note or User Role creations or any technical changes required in system.
Hope the requirement is clear and in case need any clarification please revert back.
NOTE: Right now in Development System we don’t have any successful user to compare the settings.
Regards,
Kumar.S

Thanks Patra.
Even I searched in SAP portal and couldn't able to find the relevant OSS note.
Following is my BASIS team response,
"Only you can view Table Field values from higher release"
Can you suggest / guide on this comment as well.
Looking forward to your speedy response.
Regards,
Kumar.S

Calculate: select a specific part of a measure

Hi,
I do not know if it is possible to calculate the measure as I could not find the solution in the manual, I want to calculate the total meda expenses for a specific brand divided by the total media expenses for the product in whole. All brands are member of the brand dimension. I have already a measure thats provides the expences per brand, but can I select a specific output or the total result from my spec brand measure? Or how can I solve it in any other way. Ps Iu2019m creating the measures using Pilot Administrator (2007 version).
Best regards,
Davy

Dear Davy ,
As per my understanding , you want a measure which divides the media expenses for a brand by the total media expenses for the whole product.
This can be done by using the CALCULATE statement. You can copy the value of the TOTAL media expenses into a variable "X".
Now, you can recalculate the media expenses for each brand by using the CALCULATE command :
CALCULATE mediaexpenses = mediaexpenses / X FULL
This would calculate the media expenses at all the levels .
Hope this helps,
Vijay

How to select a specific cell in a JTable?

Hi there,
in a JTable, I would like to select a specific cell (to highlight it) from a JButton.
Here a sample code...
Who could help me to fill it?
import java.util.*;
import javax.swing.*;
import javax.swing.table.*;
import java.awt.*;
import java.awt.event.*;
public class TableSelection{
    public static void main (String args[]) {
      JFrame frame = new MyFrame();
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.show();
class MyFrame extends JFrame{
public MyFrame(){
    setTitle("TableSelection");
    setSize(WIDTH,HEIGHT);
    DefaultTableModel myModel = new DefaultTableModel(2,2);
    JTable myTable = new JTable(myModel);
    myTable.setCellSelectionEnabled(true);
    JButton button00 = new JButton("select 0,0");
    button00.addActionListener(new ActionListener(){
      public void actionPerformed(ActionEvent event){
     System.out.println("selection of cell (0,0)");
     //--- what code is required to select the cell(0,0)?
    JButton button11 = new JButton("select 1,1");
    button11.addActionListener(new ActionListener(){
      public void actionPerformed(ActionEvent event){
     System.out.println("selection of cell (1,1)");
     //--- what code is required to select the cell(1,1)?
    Box myBox = new Box(BoxLayout.Y_AXIS);
    myBox.add(new JScrollPane(myTable));
    myBox.add(button00);
    myBox.add(button11);
    getContentPane().add(myBox, BorderLayout.CENTER);
private static final int WIDTH=200;
private static final int HEIGHT=200;
}Thanks a lot for your help.
Denis

Use the addColumnSelectionInterval(int index1, int index2)method ~ http://java.sun.com/j2se/1.4/docs/api/javax/swing/JTable.html#addColumnSelectionInterval(int,%20int)
and the addRowSelectionInterval(int index1, int index2) method ~ http://java.sun.com/j2se/1.4/docs/api/javax/swing/JTable.html#addRowSelectionInterval(int,%20int)
Hope that helped.
afotoglidis

Can you select a specific item from a listbox via scripting?

This seems like it should be easy, but I've spent quite a few hours trying to figure this out, to no avail. I'm trying to create a button that would automatically select a specific item on a listbox. I though "selectedIndex" would do the trick, but this seems to only work if the user actually selects a specific item on a listbox. I'm looking for the opposite effect, where a person will push a button where a specific item on the listbox gets selected.
Any help would be much appreciated...thanks!

You can use the setItemState method for this purpose.
To select the third item use:
ListBox.setItemState(2, 1);

How to: Select a Specific Timeline Displayed in Project Online when having multiple timelines within the Enterprise Project

Currently I have an Enterprise Project which has 6 custom timelines and I want to know how to select a specific timeline to be displayed on the Project specific SharePoint site.
I'll provide some background for you so you understand my issues... I have created a "template" project with 6 custom timelines. From that project I created multiple new projects - which they all have the 6 custom timelines. These projects are
all stored in the Project Center. The problem I am having is I don't understand how to select a specific timeline to show on the project specific SharePoint site. They all seem to be displaying 1 of the 6 timelines (in no particular order). I was thinking
maybe if I had edited a project and saved it while it was displaying a specific timeline it would display the last selected timeline on the SharePoint site, but it doesn't seem to be doing that.
Is there a way to select a specific timeline to display on the SharePoint site? Also, is there a way for a user to cycle through the numerous timeline view on the project specific SharePoint site?
I await your help!! :)

Michelle_Sm --
I ran into this problem at the company where I used to work. One of our PMs had created multiple Timeline views, and wanted a specific custom Timeline view to show up in the Project Site for that project. I could not see any way to make that
happen. We had one of our SharePoint developers look into the issue, and he could not see any way to make this happen either. So, I am thinking this is not possible to do. But I would gladly welcome others in this forum to tell us the trick,
if there is one! :) Hope this helps.
Dale A. Howard [MVP]

How to select a specific XML node with XPath

Hi,
I'm trying to a select a specific node from my XML data using the XPath Builder. For example, say I have a process variable 'xmlData' with the
following contents:
    User 1
    101
    User 2
    102
I can successfully use the following expression to retrieve the name of
a specific user:
(/process_data/xmlData/users/user[userid='102'])/name
The problem is I need to use another process variable for the selection
key. For Example:
(/process_data/xmlData/users/user[userid=/process_data/@userId])/name
But this always returns null. I've tried surrounding /process_data/@userId
with single quotes, double quotes, and event {$..$}.
Any help would be greatly appreciated.
Thanks.

Hi,
Thanks for the quick replies. I gave a bit of a bad example, as the
userid in my data is really a string, not a number.
A better example is:
    User 1
    user1
    User 2
    user2
I can get the following to work perfectly:
(/process_data/xmlData/users/user[userid='user2'])/name
but I can't get it to work with
/process_data/@userId = "user2"
(/process_data/xmlData/users/user[userid=/process_data/@userId])/name
Thanks.

I have selected a specific text tone for a certain contact but I only receive default tone when they text me. Why?

I have selected a specific text tone for a certain contact but get the default tone when they text me. What am I doing wrong?

Interestingly the selected text tone plays when texted by another iPhone.

When using a numbers spreadsheet, how do I select a specific area for printing?

When using a numbers spreadsheet, how do I select a specific area for printing?

Also this would be a question for the Numbers app fourm. Not the iMac hardware fourm.

Ive been having issues checking individual categories in the itunes store. All i get is a blank screen when I select a specific category. The only thing I can see is the initial apps store when I select apps. Whats going on?

I get a blank screen in my apps when I select a specific category in the app store in itunes. whats going on?

The same for me.
Bug is reproduceable.
Greetings, Anakonda

Filter on attribute of 0MATERIAL filters charac. values without master data

Hi SAP-Gurus,
I've a problem while executing a query (this query is based on a MultiProvider).
I got the message "Filter on attribute of 0MATERIAL filters charac. values without master data" and I don't know why.
When I don't use the filter on the navigation attribute, the query can be executed without any errors, bute when I set the filter, the warning message comes again.
Thank you all,
Clemens

Dear all SAP Gurus,
we've solved this problem and this is the solution:
The warning is triggered by the method CL_RSDRV_ODS_QUERY-PROCESS_SFC_WITH_ATR when the BExFlag of the InfoProvider is not set. Using DSOs for direct update there is no change to change the BExFlag. As a result queries based on a DSO for direct update always throw the above mentioned warning when filter-characteristics are attributes.
Regards, Clemens

Is there a way to select a specific playback device while using itunes 11 on Windows 7?

Is there a way to select a specific playback device while using itunes 11 on Windows 7? I was trying to select a device, is there such an option in itunes as there is in VLC player and Windows Media Player. If not, any idea when this feature will becoem available? Thanks!

iTunes supports multiple Airplay devices that can be selected. If the device does not support Airplay then the manufacture of the device would need to support it for iTunes.

Selection of material if no charac value selected or specific charc value

Similar Messages

Maybe you are looking for