Selection of Printer while printing through the ME9F transaction

Dear Team
While printing the Purchase Orders using the print command ME9F the system does not ask for any specific printer, instead the default printer is selected and the print is executed. But in practical several printers are available in the network and I need an option to selct a perticular printer.
Suresh

Hi,
In the condition records or in the message details of the PO we l assign the type of printer like LP01, LP02 and etc but not the printer. Under LP01 we may have more than one printer and similarly under LP02 we may have more than one printer. In such cases how to select a particular printer.
Regards
Suresh

Similar Messages

How to get the form printed through the transaction ME42

hi,
How to get the form printed through the transaction ME42.
For example :
In t.code vf03 . In the main menu there is an option billing document , when we click on that we get a drop down menu which shows issue output to. If a print program call has the code to get the value from the t.code , immdiately when we click issue output to it call the form.

Here go to ME42 put in your RFC no, in the menu Header -- Messages, go there and see if a message has been inserted, else you can insert one.
when you save this, it will call the form.
Regards,
Ravi

My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

My MacBook Pro recognizes which of my three printers is plugged in (USB), but can it automatically use that printer or do I have to select that printer from the list each time I switch between printers?

Printing through the network

I have heard the I can print through my wireless network. Just where do I have to go and what do I have to do to get that going ? I want to be able to print to a printer upstairs from a pc downstairs. The pecee recieves a signal from my wreless router by my macpro.
thanks

This whole thing began when I asked the tech at school if he had ever used a bluetooth printer. He reponded by saying, "Why would I ? I can just print through the network," I had been thinking of getting a bluetooth printer so my partner could print from downstairs, The printer upstairs prints through the usb cable from the mac pro. No ethernet connection no blutooth on this printer. So this is what leads me to the question.
So it's the printer sharing I need to look at in system preferences ! Thanks. It's got to be possible to go cross platform. I print from both pc and mac to a printer in the room next to mine at school. I've never done anything but add printer from an available printer list which is identifiedby room number or entering the ip address for the printer. I've not needed to do anything about sharing printer in settings. Would this mean the mac pro which it's connected to needs to be on to print from the pcee downstairs or just that the network be active ?
Thanks

Does ODBC encrypts data while passing through the network?

Does ODBC encrypts data while passing through the network?

ODBC uses the underlying Oracle networking components to transmit data. By default, these components do not encrypt data, although they can be made to do so-- see the "SSL Encryption" thread from a few days ago.
Justin

Evaluated Receipt Settlement (ERS) Smart form through the MRRL Transaction

hi all,
i am handling a smartform .
How can i run my Evaluated Receipt Settlement (ERS) Smart form through the MRRL Transaction ?
what fields should be put in the Nast -objectkey?
if possible Please Mail to me in my id <REMOVED BY MODERATOR> any documentation available for the given Transaction(MRRL)
Thanks & regards,
Cheenangshuk
Edited by: Alvaro Tejada Galindo on Feb 28, 2008 11:45 AM

Hi,
ERS Definition: - Procedure for settling goods receipts automatically. When you use Evaluated Receipt Settlement (ERS), you agree with the vendor that the latter will not submit an invoice in respect of a purchase order transaction. Instead, the system posts the invoice document automatically on the basis of the data in the purchase order and goods receipts. This eliminates invoice variances.
Uses: -
- SAP recommend that you implement ERS only if you and your vendor have a clear agreement on the applicable conditions and you continuously update the purchase orders in the system.
- The system determines the invoice amount for the relevant ordering transaction from the prices entered in the PO, the terms of payment, the tax information and the delivery quantity entered in the goods receipt.
- ERS also generates credit memos: If an invoice has already been posted for a goods receipt and a return delivery has since taken place, the system generates a credit memo for the quantity returned.
Advantages: -
Evaluated Receipt Settlement (ERS) is particularly suitable for creating settlement documents at regular intervals.
ERS has the following advantages:
- Purchasing transactions are closed more quickly.
- Communication errors are avoided.
- There are no price and quantity variances in Invoice Verification.
In test mode, the system can issue a list of goods receipts that can be settled and goods receipts that cannot be settled. The system makes no postings, it only lists the invoices selected.
Refer following links for more details;
[Evaluated Receipt Settlement|http://help.sap.com/saphelp_erp60_sp/helpdata/en/a8/b99f58452b11d189430000e829fbbd/frameset.htm]

Trying to find a way to add multiple google acounts to e printer through the cloud. c310a Photosmart

My wife and I have 2 separate Google Chrome cr48 laptops. In order to print we have to print through google cloud which is why I purchased this c310a. After registering her account to the printer, I try to register mine and get an error saying already registered to another acount. I would hope this printer can handle more than one google cloud account, because it would increase the practicality for buisnesses.

Hi timshep. If you have already 'shared' your printer in Google Cloud Print, and not getting the results you are looking for, maybe I misread your question.
Let me clarify. Google Cloud Print is only set up one time. After that, once the printer is shared by that 'master' Google' account with all of the other 'Google Accounts' that you want to be able to cloud print from will simply be able to access it, without adding the printer the same way the Master account set it up.
Now if I am way off base on what you are doing, here are some other questions that come to mind.
Are you trying to have multiple Google "Cloud" accounts listed in the HP Eprint App under the 'Cloud' option?
Or perhaps you specifically talking about Google CloudPrint App?
8. How do I use the Google Cloud Print app for Android? (Talks about multiple accounts)
https://support.google.com/cloudprint/?hl=en#3153824
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Setup restrictions to the printer through the embaded network adapter

I've recently prochesed an HP Officejet Pro K8600dn printer.
I've connected the printer to the internet through the embaded network adapter and it worked perfectly. Howerver, the printer can be freely used by anyone in my network so i'm wondering if there's a way to block certain ip's or to configure any of that in the printer?
Also, the EWS server that came with the printer works perfectly and i can access it through my web browser. I cannot find anything about configuring allowed or blocked ip's.
Thanks in advance for any help.

Not likely this printer is going to have that kind of security features. You'd be looking at something like a logon feature or Kerberos Authentication (which requires a dedicated server). This is just a simple open port that allows anything on the network to access the printer as long as it talks the right printer language.
That being said, the router configuration is a whole different animal. With the printer set up with a static IP, your router might allow you to restrict traffic to that address. You would need to check your router configuration or contact their support staff for assistance.
insert signature here

Laser jet pro m475 won't print through the wire

Hi laser jet pro 400 as just decided it's going to print anymore through the wire. Tried three different wires no good. It says not communicating with printer. Tried others computers and it the same.
Any ideas
Thanks Craig

Digcon,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I have a new MacBook Pro that prints fine with my upstairs computer, but the IMAC will not print through the AirPort

I have a Canon printer (USB), in my office. I plugged it in to the back of the Airport Router. The downstairs new MacBook Pro can print with either of my two printers upstairs with no problem. The IMac upstairs can not see the Canon printer at all. When I go to Print & Fax settings, it does not see the printer! How can I solve this?
THANKS!

You will need to get on the Canon website and download the latest drivers for your printer on the iMac.
That's really about all that you can do.

Compiled PDF (from 8MP images) lagging/flashing whites/refreshes while scrolling through the pages.

Hi guys,
I would like to find out how exactly to optimize the pdf file so that I don't experience the problem mentioned in the subject line.
what i did was take pictures of a few documents (80% text, 20% images) using a Canon G12 (had similar results with a DSLR too), and compiled them into a 200page PDF, using medium quality in PDF complier.
after that, i used Clearscan to OCR the whole thing, + cropped the white borders to make it fit nicely.
however after saving the PDF file, scrolling through the images feels laggy, it needs to "refresh" itself every now and then, which appears as flashing whites.
how do i prevent that?
i'm extremely certain it's not the problem with the computer.
i have tried with a quad core i7 sandy bridge with 16gb ram and it lags. it lags on other computers as well. however, a normal ebook with images and text scrolls through smoothly. what is it that i'm doing wrong?
i am on Acrobat X Pro by the way.
Thanks!

Hi guys,
I would like to find out how exactly to optimize the pdf file so that I don't experience the problem mentioned in the subject line.
what i did was take pictures of a few documents (80% text, 20% images) using a Canon G12 (had similar results with a DSLR too), and compiled them into a 200page PDF, using medium quality in PDF complier.
after that, i used Clearscan to OCR the whole thing, + cropped the white borders to make it fit nicely.
however after saving the PDF file, scrolling through the images feels laggy, it needs to "refresh" itself every now and then, which appears as flashing whites.
how do i prevent that?
i'm extremely certain it's not the problem with the computer.
i have tried with a quad core i7 sandy bridge with 16gb ram and it lags. it lags on other computers as well. however, a normal ebook with images and text scrolls through smoothly. what is it that i'm doing wrong?
i am on Acrobat X Pro by the way.
Thanks!

Want to change the BSEG-SGTXT while process through the transaction:FF_5

Hi,
I want to change the value in BSEG-SGTXT during the process through the transaction:FF_5.
Can any one suggest any BADI or User Exit to update the SGTXT.
Regards,
Hema T

Hi
If your text is going to remain content based certain transaction types or text in the note to payee field then you can use the below functionality.
Advantage no ABAP help required.
Define Search String :
Strg Name : Text
Strng : Test (say if you want to find the word "test" in the incoming record. You refer the help doc on Search string for combinations)
Mapping : (keep it blank)
In Search string use :
1)
Company code :
House bank id:
Account id:
Int algthm : (if you are using any)
Strg name: Check
Target field: BDC Field name1 BSEG-SGTXT
2)
Company code :
House bank id:
Account id:
Int algthm : (if you are using any)
Strg name: Text
Target field: BDC Field value1 "text that you want to enter in the Bseg- sgtxt field"
3)
Company code :
House bank id:
Account id:
Int algthm : (if you are using any)
Strg name: Check
Target field: BDC Acct type1 0
0: First line, posting area 1
1: First line, posting area 2
2: Second line, posting area 1
3: Second line, posting area 2
Regards
Nikhil

How can I select a printer in the moment when I want to print a report?

Hi,
I don't know is there are a way that when I want to print a report, appears a window where I can select a determinated printer in a list? Like when I print in Word that can call a window where appears all teh printers instaled in Windows and the I can select one. Anyone can help me please?
Thanks

You may do it by creating a LOV in your report-invoking env. to select the wanted printer and pass it to Reports. An example of doing it in Apex ....
http://1.2.3.209/dev60cgi/rwcgi60?repdevi_key&server=Rep60_devi&report=myrpt.rdf&DESFORMAT=PDF&DESTYPE=PRINTER&DESNAME=hp2100&BACKGROUND=YES&P_1=....
Or you may do it in Reports using Parameter Form.

Printing through the eprint center

I have a 8500A plus and can't seem to figure out how to get the attachment to print when an email is sent to it from the eprint center.

Hi mattinkent,
You can use the HP ePrint Home & Biz app found HERE. This app will allow you to change the paper size on the fly, so you can print the photo on A4, bypassing the need to preload the 4x6.
First, you'll want to create an ePrint account HERE. Then, enable ePrint on your printer and register the printer with your ePrint account. Click HERE for guide on setting up ePrint on your printer.
Lastly, you'll want to add the printer to your HP ePrint Home & Biz app.
Let me know if I can be of any further assistance.
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP C7200 All-in-One printer will not print through the Wifi network

I have used the HP printing and scanning Doctor but none of the proposed solutions have solved the problem. The blue light for wirelwss 802.11g service is on and connected to the same Wifi address as my laptop is using now. My Dell laptop is running Windows 7 and the printer works if I use the USB connection instead of the Wifi. Any suggestions?
Larrypat
This question was solved.
View Solution.

Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Selection of Printer while printing through the ME9F transaction

Similar Messages

Maybe you are looking for