Selection of Production version during MRP run

Hello experts
At present I am having 2 production versions for a material code as PV01 and MV01.
By putting validity date I am restricting correct version to be picked in MRP.
Is there any other way, for example in material master where if I maintain the production version, then MRP should pick that only.
Please suggest the best way.
Regards
Pradipta Sahoo

Dear Pradipata,
If you are having more than one production version for a material for the same Lot size and validity
dates,and if you have given BOM selection method as 2 in MRP4 view,then always the system picks up
the first production version defaultly.
If you want the system to pick up the second production version in that case means,you have to lock
the first production in MM02 or C223.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

Selecting production version in MRP run

Hi dudes,
our client is having reuirement is he will select the production version irrespective of lot size, but he select the production version at the time of manual creation of process order where it depends on resource(work center used in recipe of particular production version, BOM will be 1 alternative only.
now while running MRP how to make system to allow manual selection of production version at the time of converting planned order to processs order.
respond asap plz...
Daniel.

Hi ,
During MRP, system will select the production version based on Validity date & Lot size.
If a material contains two production versions with same validity date & Lot size qty , system will select the First valid PV by default (unless it is locked) & will copy to planned order.
When u convert the planned order to production order,default PV will be copied automatically from planned order. Here u cannot select PV manually.
Settings:
Create valid production version with lot size and Valid routing , BOM at MRP view of Planning material.
Assign the selection method = 2 or 3 at MRP view of Planning Material
Regards,
Anand.

Manual selection production version during order creation

hello!
i have setup production orders that during order creation the production version has to be selected manually. this works fine in CO01 and CO40. but in CO41 the production version is determined automatically - where would i change that setting?
best regards,
matthias

Dear Matthias,
In my understanding it is not possible in standard SAP.
If you have manual selection of production version and if you have set the BOM selection method as 2 in
MRP 4 view of the material master then,
1.If you create a production order manually then the system displays the pop up to select a production
version.
2.If you are converting the planned order into a production order then it picks up the one which is
present in the planned order.So obviously if 2 production versions are there with same lot size and
validity dates,then the system picksup the first one only during MRP run.
Even if it picks up the first prod.version in planned order,but while converting click on master data and
change the production version if required.
3.Otherwise what you can do is set the production version in MD61 itself ,so that its going to be
considered during MRP run and same will be included in the planned order.
Check and revert back.
Regards
Mangalraj.S

BOM selection during MRP running

Hi,
   I have a question about BOM selection during MRP running...
   I have three production version and all of them are valid at the same time..I get a problem "no BOM data seletion" during MRP
running..I suspect it is due to that I have three production version and MRP didn't know take which one..Can anyone tell me
where can i config it or what's wrong with it in my situation?
   btw,BOM usage and stats are correct .so is the router data..since MRP is running well if i only have one PV..thanks..

Hi Monst,
Looking at the screenshots you uploaded, it seems that the validity of each of the production version is from 7.12.2011 to 1.12.2012.
Please check whether for Planned order no. 36659 alternative BOM no. 1 is getting selected (Since BOM selection ID is 2).
For planned order nos. 36660, 36661 and 36662, the start date is perhaps before 7.12.2011 and end date as we can see lies in the validity period of production version. Hence, neither of the alternatives of the BOM is getting selected.
For verifying the above logic, please make the BOM selection method as 3 (selection only by production version) and run the MRP. I think MRP will get terminated in this case since no BOM will be chosen for first planned order.
Just in case u need to select the BOM for planned orders, you can manually enter the production version no. in the planned order change mode.
Please tell if this helps and revert back.
Regards,
Chetan.

Selecting prod.version before MRP run

hi all;
can any body know about-how the production version selecting before MRP run?
for example: I have a material.it has 2 production version. when I run the MRP, MRP reads first production version(prd vers-1). but I want to select other production version(prd vers-2). how can I make this selection?
Regards,
Sema

Hi,
If you want to select the perticular alternative BOM define it in production version.
Theree is option by which the PV is manually assiged
Goto MD62
Execute the report
Goto Schedule line tab page
Fallow the menu path
Setting Production version
Enter the Production version required
Save
So system will select the perticular alternative BOm which maintain in that production version.
Regards,
R.Brahmankar

How to select the production versions for MTO?

Hi PP Experts,
In our scenario we have two production versions and also we are in MTO strategy. While creating the sales order is there any option to select the production version (i.e.) before planning for that corresponding sales order I have to choose the production versions.
Example:
Material u2013 A -
sale order u2013 666001 u2013Prod version - 0001
Material u2013 A --- sale order u2013 666002 u2013 prod version - 0002
How to map the above scenario?
Thanks in advance.
Regards,
Vimal

In our scenario we have two production versions and also we are in MTO strategy. While creating the sales order is there any option to select the production version (i.e.) before planning for that corresponding sales order I have to choose the production versions.
If the Production version selection is based on Lot size means No problem.
If both the Production version is same lot size, system will select the first PV only in MRP
In STD SAP, we can't Give Production Version in sale order level,
If you want after MRP run , U can assign Production version in plan order or in production order Manually

Storage location consideration during MRP Run

Hi All,
Within a company code, i am having 2 plants namely PS12 & PS13. In plant PS12, i am three storage locations namely 1201, 1202,1203. Similarly in plant PS13, i am having stores 1301,1302,1303.
During MRP run, i do not want to consider the stock in all the storage locations of PS12. The storage location 1203 to be exclued during MRP run. How to set this?
Your input will be appreciated very much,
Thanks
Kumar

Hi Kumar,
Goto SPRO>Production>Planning>Define Storage Location MRP per plant, add the storage location to be ignored during MRP and select indicator '1' against it. Thereafter, all the materials created with this storage location will be defaulted with value '1' in the field 'SLoc MRP indicator'. However this can be modified later if required.
For existing materials, select indicator '1' in the field 'SLoc MRP indicator' avaialble in MRP view under the column 'Storage location MRP'. Go for a mass update for a huge list of materials.
Check this and revert for any clarifications.
Regards,
Murali

Manual selection of production version in REM scenario.

Hai gurus,
I discrete manufacturing we can several production versions and we can select the same manually
when we convert planned order to production order. Like this whether it is possible in REM scenario
to select the production version manually, if so what is the settings and procedure.
waiting for the positive reply.
regards,
sekar chand.

Dear Sekar Chand,
Are you not able to select the production version in MFBF manually ,assuming if you have more than
one production version for the same material?
What Tejas has suggested you is to start the planning process itself based on Prod.versions ---> MRP
run-> planned orders--> Production confirmation.
In case if you do not take MRP run and go for a direct confirmation also you will be able to select the
production version in MFBF.
IF not means revert back.
Regards
Mangalraj.S

Schedule lines are not getting generated during MRP Run

Schedule lines are not getting generated during MRP Run. I have maiantained source list for the material with proper validity date and also maintained scheduling agreement . MRP relevvant Indicator , I have marked - 2 which means -Record relevant to MRP. Sched. lines generated automatically.
Still I am not able to get schedule lines and instead of that *Purchase Requisitions* are getting generated.
Can any one help me and suggest me what to be done in this case .
Thanks & Regards ,
Nirmalya

Dear,
Welcome to SDN,
In transaction OMDT you have to enable the indicator create schedule lines
In MD02 MRP control Prameter here select the Delivery schedules -3- Schedule line. Processing Key as NETCH and Planning Mode - 3 delted and recreated.
Maintain source list ME01, in that put MRP indicator as '2' i.e. schedule lines via MRP.Put your agreement no in that.
If u run MRP properly u will get schedule lines automatically in ME38.
Make the schedule agreement, make it source relevent in the source list make is FIX and MRP indicator as 3.
Regards,
R.Brahmankar

Change Production version during creation of Process Order COR1

Hi,
Scenario:
Based on the entered Material, Plant and Order type system need to trigger a popup asking the user to select the Production Version. This should happen before clicking on SAVE button, so that all the values will be populated correctly based on the changed VERID.
I did not find a user exit that enables to change the Production Version (VERID) value. So I thought of displaying the popup in the user exit EXIT_SAPLCOZF_003 which will be triggered before initial screen appears, export the selected value and pass it to a User Exit or BADI where VERID can be changed. But cannot find a user exit to do it.
Please help me find a User Exit or BADI to change the Production Version during creation of Process Order using COR1 transaction before clicking on SAVE button.
Thanks,
Manoj.

Hi Manoj,
So - almost four years later - I saw your post and I saw myself in the very same situation as you did...
I found a solution for those who wants to change the production version of the production order from the sales order creation: create an enhancement in the function module 'MD_VERSION_SELECTION' and you are good to go.

Alternative items during MRP run

Hi,
I have seen discussion on alternative items in BOM. Thanks for all for sharing your knowledge. I knew alternative items will be choosen while creating / release of production order (material availability check)
Requirement:
For material A, I am using component B as priority 1 and component C as priority 2.
During MRP run, system needs to CHECK component B first. If stock is not available for component B then system need to consider component C automatically. It should not create any planned order for component B.
Is it possible, system will check automatically alternate items during MRP run? if so kindly let me know the logic.
If not, is there is any user exit. Customer is asking this facility. Its his basic requirement.
Kindly give your suggestions....
Regards / US

Hi.
I might have typed it wrong, I think the right one is called DIMP.
As far as I know you don't have to purchase it. In the past those extensions were known as Industry Solutions, in this case Automotive and A&D.
Before you go to this complexity for interchangeable materials functionality in MRP, I recommend that you have a design review with your customer, to strengthen the point that if two materials are the same for all usage purposes, but only differ, let's say, in the source (different manufacturer). for that in SAP we would define ONLY ONE material number, with additional manufacturer part number info, and in some cases with a classified batch.
Regards,
Mario

Cheracteristic consideration during MRP run

Dear frnds,
during implementation for one steel industry i have stuck up in problem which is
they have crm plant in which finished products are endless depending upon thickness like .023,.325
if we make material master for every thickness then it will infinite number of material master.
so we thinking for single material master group of thickness i.e for single mmr for range of thickness and during sales order creation person will mention actual thickness in text of sales order or we can make it configurable and characteristic for actual thickness so during he will mention actual thickness in characteristic value.
but problem is that during mrp run, characteristic value is not taking into consideration,
so i want some customization so that characteristic value is considered during mrp run
please help me out its very urgent
thanks

Hello,
are you talking about a pure ERP implementation? A good description on modelling this with APO can be found in the Best Practice for Primary Steel (see link on BPX Mining and Metal).
Usually we work with configurable material variants, as a starting point.
Best regards,
Stefan

Rounding of Decimal for dependent requirement During MRP Run

Hello Experts,
I have the following scenario:
We are currently enabling Characteristic Based Planning in our system.
Our one component is selected when two characteristic values are met through object dependencies.
Ex: Component A = Char A= '002' and Char B ='002'
Now we have given the following Usage Probability for the two characteristic:
Char A = 20%
Char B = 15%
And the total PIR quantity is 25 Pcs for Configurable Header.
With the above usage probability and PIR Qty, We have a dependent requirement of 0.75 Ea
((20% X 15%) of 25 Pcs) = 3% of 25 Pcs = 0.75 Ea of the component
Now during MRP Run I want to round the dependent Requiremnet to 1 Ea instead of 0.75 Ea.
Any suggestion towards the solution will be appreciated.
Regards,
Vinod

Hi Vivek,
As mentioned we are using Characteristic Based Planning.
The component is selected based on a Selection comdition which is as follows:
Component 721290201000 = $PARENT.BCS_RL_LINE_LOADER = '002' and $PARENT.BCS_RL_WAFER_VENDOR ='002'
When the above two conditions are met the component is selected.
In Characteristic Based Planning we give percentages (Usage Probabality) to the characteristic values like:
$PARENT.BCS_RL_LINE_LOADER/'002' =20%
$PARENT.BCS_RL_WAFER_VENDOR/'002'= 30%
For the Parent which is a KMAT Material we maintain the PIR say 40 Qty.
Now the component qty is calculated as follows:
721290201000 =(20% X 30%) of 40 Qty of parent
721290201000 =(6%) of 40 Qty of parent
721290201000 = 2.4 Qty of component is the dependent req.
Now my requirent is to round the dependent requirenment to 3 during MRP Run. Please note that the purchase requisition got from the above dependent requirement is rounded to 3 qty.
Now I want to round the dependent requirement.
Regards,
Vinod

Automactic Selection of production Version

Hi.
I have created a material "A"
I maintained in material master's MRP4 view selection method "2"
I have created two production version with same validity period & same lot size "0001" & "0002"
I maintained in order type dependent parameter's masterdata tab in production version column "Automatic production version selection"
Now when i am going to create a process order system is selection production version "0001".
But I want automatic selection of production version "0002".
What setting shall I do?
Regards
Vivek

Dear Vivek,
I maintained in order type dependent parameter's masterdata tab in production version column "Automatic production version selection"
In order type dependent parameters maintain as manual selection
Then system will raise an pop-up to select production version while creating prodiuction order
The above setting is only useful while creating manual production order
If you are converting plan order to production order then above setting will not play any role
System will default take 1st PV
All you can do is you can change manually in plan order
Or if you want system to take automatically in MRP then you need to lock 1st PV
Also refer my reply from this thread
[Alternative BOM selection|Using customer to determine what BOM to use in Production order (tx:CO41);
Regards
Madhu

Selecting New Production version while Splitting a Production Order

Hi SAP Gurus,
Is there any option of selecting a New Production Version for a split Production Order?
I have a production Order with three operations 10.20 and 30. This production Order is curently using the Production Version 001. Now , i have split the production order at Operation 30 and want to select new production Version 002 for the same.
Can you please let me know if this is possible?

Hi Sandeep,
   If you don't mind can you please let me know for what purpose you want to assign a new production version to production order after splitting at operation 30?
   To quickly recap, Production version is used if you have alternative BOM or alternative routings for a material. Based on Production Version that you have assigned in Material Master - MRP screen, your Routing and BOM details are selected.
    So how is this Production Version 002 different from Production Version 001 - is it in terms of routing or bom?
With Best Regards,
Srinivas

Selection of Production version during MRP run

Similar Messages

Maybe you are looking for