Selection of records in TABLE CONTROL.

hello friends, this is venkat.
I have been using a table contrlo to display the contents of a custom table.
my table control can display 10 records in one shot and my custom table had more than that. vertical scroll bar has been working properly so i can see all the records in the table control area.
now my problam is after i selecting one record, to select another record i am using the vertical scroll bar. but the moment i am scrolling the vertical scroll bar the previously selected one becomes non selected..
how can i select a record and still scroll down or up to select some more records..
another doubt i had is when ever i use vertical scroll bar PAI is geeting triggered but i am not gettig any information in SY-UCOM... how can i catch this event...
just like checking for function code when we click on PUSH BUTTON.
i will be very thanful if any one can give me some guidance.....
Venkat.

Hi Venkat,
Basically there are 2 ways in which u can create a table control either for a internal table or for database table.
u can use the wizard from within the screen painter OR
create a table control manually adding individual fields and handling the table control on your own.
in the former method, SAP generates the code behind automatically which is not really comprehendable.
I prefer the later method where u code and have a lot of flexibility of changing the table control at a later stage.
For information on creating table controls, please refer SAP library under
ABAP Programming>ABAP User dialogs>Screens>Complex screen elements>Table controls

Similar Messages

How to Enable a Selected single record from Table control...

Hi,
I have 5 records in my table control and in screen Painter in Made all the fields in Table control as Output field.
and successfully all my Table control fields are disabled...
Now Now i want to enable the record which i selected n rest all the 4 records should be in Disable.
what i did is:
in PBO.
loop at itab into wa with contol TBC1 .
Module XYZ.
endloop.
Module XYZ.
loop at screen.
if screen-group = 'x'.
screen-input = 1.
modify screen.
endif.
End Module.
Please help me....
Thanks,

hi
in the layout of the screen u might have dragged and dropped the table control
double click on it u will get attributes screen in that u select MULTIPLE or SINGLE under Line-Selection
under attributes tab based on ur requirement.
table control declaration:
controls : control type tableview using screen 8000.
the internal table in table control must be like
data : begin of itab occurs 0,
empno type .......,
empname......,
empcity.....,
check(1), " for tab selection"
end of itab.
data : itab1 like itab occurs 0 with header line.
data : flag.
data : wk_init type i.
data : lines type i.
in the attributes screen of the table control
pass the value ITAB-CHECK to the field W/SELECTION
in SE51
PBO
Module_status_0800
loop with control table_control_name.
module_fill_tcontrol.
endloop.
PAI
Module_user_command_0800
loop with control table_control_name.
module_read_tcontrol.
endloop.
in se38
Module_status_0800.
describe table itab1 lines lines.
control-lines = lines.
endmodule.
Module_fill_tcontrol.
describe table itab1 lines wk_init.
if wk_init is not initial.
    read table itab1 into itab index control-current_line.
endif.
for enabling a row in the table control:
if sy-ucomm = 'EDIT'.
    loop at screen.
      if flag is initial.
        screen-input = 0.
      elseif ( flag eq 'Y' ).
        if ( ( screen-name = 'ITAB-EMPNO' or
                screen-name = 'ITAB-EMPNAME' or
                screen-name = 'ITAB-EMPCITY' )
          and control-line_selector eq itab-check
          and control-current_line le lines ).
          screen-input = 1.
        else.
        endif.
      endif.
      modify screen.
    endloop.
endif.
endmodule.
Module_read_tcontrol.
READ TABLE itab1 INDEX control-current_line.
IF sy-subrc EQ 0.
MODIFY itab1 FROM itab INDEX control-current_line.
ELSE.
MOVE-CORRESPONDING itab TO itab1.
APPEND itab1.
CLEAR itab1.
ENDIF.
endmodule.
module_user_command.
case sy-ucomm.
when 'EDIT'. -
> Function Code assigned to the pushbutton to enable the field
      flag = 'Y'.
endcase.
endmodule.
Regards
Murali.M

How to save the selected records from Table control in dialog programming

Hiiiiiiii Every1
Actually the problem is like this:-
I have to select some records from table control and then want to save the selected records in DB table.
Example
I have some rows having inforamtion bout employees...
Now what i want is that when i click on 'SAVE' button then these selected rows should be moved into DB table.
Sachin Dhingra

see below example, I have added INSERT option after DELETE option.
REPORT demo_dynpro_tabcont_loop_at.
CONTROLS flights TYPE TABLEVIEW USING SCREEN 100.
DATA cols LIKE LINE OF flights-cols.
DATA: ok_code TYPE sy-ucomm,
      save_ok TYPE sy-ucomm.
DATA: itab TYPE TABLE OF demo_conn.
TABLES demo_conn.
SELECT * FROM spfli INTO TABLE itab.
LOOP AT flights-cols INTO cols WHERE index GT 2.
cols-screen-input = '0'.
MODIFY flights-cols FROM cols INDEX sy-tabix.
ENDLOOP.
CALL SCREEN 100.
MODULE status_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE cancel INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE read_table_control INPUT.
MODIFY itab FROM demo_conn INDEX flights-current_line.
ENDMODULE.
MODULE user_command_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
    WHEN 'TOGGLE'.
      LOOP AT flights-cols INTO cols WHERE index GT 2.
        IF cols-screen-input = '0'.
          cols-screen-input = '1'.
        ELSEIF cols-screen-input = '1'.
          cols-screen-input = '0'.
        ENDIF.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDLOOP.
    WHEN 'SORT_UP'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) ASCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'SORT_DOWN'.
      READ TABLE flights-cols INTO cols WITH KEY selected = 'X'.
      IF sy-subrc = 0.
        SORT itab STABLE BY (cols-screen-name+10) DESCENDING.
        cols-selected = ' '.
        MODIFY flights-cols FROM cols INDEX sy-tabix.
      ENDIF.
    WHEN 'DELETE'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          DELETE itab.
        ENDLOOP.
      ENDIF.
    WHEN 'INSERT'.
      READ TABLE flights-cols INTO cols WITH KEY screen-input = '1'.
      IF sy-subrc = 0.
        LOOP AT itab INTO demo_conn WHERE mark = 'X'.
          itab1 = itab.
          modify itab1.
        ENDLOOP.
      ENDIF.
      if not itab1 is initial.
        INSERT dbtab FROM TABLE itab1.
      endif.
ENDCASE.
ENDMODULE.

Duplicate records in TABLE CONTROL

Hi folks,
i am doing a module pool where my internal table (itab) data is comming to table ontrol(ctrl).then i need to select one record in table control & then i press REFRESH push button.
after putting the refresh button, some new records are comming to that same internal table.then i need to display the modified internal table (some new records are added) data in the table control.
The modified internal table data is comming to the table control but to the last of table control, some records are repeating.
before comming to table control, i checked the modified itab. it contains correct data.i.e it contains 15 records.(previously i have 5 records.after REFRESH button 10 more records are added.). but when this table is comming to table control, it contains some 100 record.i should get only 15 record.
why these records r repeting. how to delete the duplicate records from table control?
plz suggest me where i am doing mistake.
correct answer will be rewarded
Thanks & Regards

Hi ,
Thanks for ur help. but i should not refresh the internal table as some records r already present.after putting the REFRESH button, some new records r appending to this existing table.then i am going to display the previous records & the new records as well.
i checked the internal table after modification.it contains actual number of records. but after comming to table control , more records r comming.
is this the problem with scrolling or waht?
plz suggest where i am doing mistake.i am giving my coding below.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0200.
module tc_shelf_change_tc_attr.
loop at object_tab1
 with control tablctrl
 cursor tablctrl-current_line.
 module tc_shelf_get_lines.
endloop.
PROCESS AFTER INPUT.
module set_exit AT EXIT-COMMAND.
 loop at object_tab1.
 chain.
 field: object_tab1-prueflos,
 object_tab1-matnr.
 module shelf_modify on chain-request.
 endchain.
 field object_tab1-idx
 module shelf_mark on request.
 endloop.
module shelf_user_command.
module user_command_0200.
***INCLUDE Y_RQEEAL10_STATUS_0200O01 .
*& Module STATUS_0200 OUTPUT
 text
MODULE STATUS_0200 OUTPUT.
SET PF-STATUS 'MAIN'.
SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0200 OUTPUT
*& Module tc_shelf_change_tc_attr OUTPUT
 text
MODULE tc_shelf_change_tc_attr OUTPUT.
delete adjacent duplicates from object_tab1 comparing prueflos matnr.
describe table object_tab1 lines tablctrl-lines.
ENDMODULE. " tc_shelf_change_tc_attr OUTPUT
*& Module tc_shelf_get_lines OUTPUT
 text
MODULE tc_shelf_get_lines OUTPUT.
data: g_tc_shelf_lines like sy-loopc.
if tablctrl-current_line > tablctrl-lines.
stop.
endif.
g_tc_tablctrl_lines = sy-loopc.
*refresh control tablctrl from screen 0200.
ENDMODULE. " tc_shelf_get_lines OUTPUT
***INCLUDE Y_RQEEAL10_SHELF_MODIFYI01 .
*& Module shelf_modify INPUT
 text
MODULE shelf_modify INPUT.
modify object_tab1
 index tablctrl-current_line.
ENDMODULE. " shelf_modify INPUT
*& Module set_exit INPUT
 text
module set_exit INPUT.
leave program.
endmodule. " set_exit INPUT
*& Module shelf_mark INPUT
 text
MODULE shelf_mark INPUT.
data: g_shelf_wa2 like line of object_tab1.
if tablctrl-line_sel_mode = 1
and object_tab1-idx = 'X'.
 loop at object_tab1 into g_shelf_wa2
 where idx = 'X'.
 g_shelf_wa2-idx = ''.
 modify object_tab1
 from g_shelf_wa2
 transporting idx.
 endloop.
endif.
modify object_tab1
 index tablctrl-current_line
 transporting idx plnty plnnr plnal.
ENDMODULE. " shelf_mark INPUT
*& Module shelf_user_command INPUT
 text
MODULE shelf_user_command INPUT.
ok_code = sy-ucomm.
perform user_ok_tc using 'TABLCTRL'
 'OBJECT_TAB1'
 changing ok_code.
sy-ucomm = ok_code.
ENDMODULE. " shelf_user_command INPUT
*& Module user_command_0100 INPUT
 text
MODULE user_command_0200 INPUT.
data:v_line(3).
case OK_CODE.
when 'LAST'.
read table object_tab1 with key idx = 'X'.
if sy-subrc = 0.
select * from qals
 where enstehdat <= object_tab1-enstehdat
 and plnty ne space
 and plnnr ne space
 and plnal ne space.
if sy-dbcnt > 0.
if qals-enstehdat = object_tab1-enstehdat.
 check qals-entstezeit < object_tab1-entstezeit.
 move-corresponding qals to object_tab2.
 append object_tab2.
 else.
 move-corresponding qals to object_tab2.
 append object_tab2.
 endif.
 endif.
 endselect.
 sort object_tab2 by enstehdat entstezeit descending.
loop at object_tab2 to 25.
if not object_tab2-prueflos is initial.
append object_tab2 to object_tab1.
endif.
clear object_tab2.
endloop.
endif.
when 'SAVE'.
loop at object_tab1 where idx = 'X'.
if ( not object_tab1-plnty is initial and
 not object_tab1-plnnr is initial and
 not object_tab1-plnal is initial ).
 select single * from qals into corresponding fields of wa_qals
 where prueflos = object_tab1-prueflos.
 if sy-subrc = 0.
 wa_qals-plnty = object_tab1-plnty.
 wa_qals-plnnr = object_tab1-plnnr.
 wa_qals-plnal = object_tab1-plnal.
update qals from wa_qals.
if sy-subrc <> 0.
Message E001 with 'plan is not assigned to lot in sap(updation)'.
else.
v_line = tablctrl-current_line - ( tablctrl-current_line - 1 ).
delete object_tab1.
endif.
 endif.
 endif.
 endloop.
when 'BACK'.
leave program.
when 'NEXT'.
call screen 300.
ENDCASE.
***INCLUDE Y_RQEEAL10_USER_OK_TCF01 .
*& Form user_ok_tc
 text
 -->P_0078 text
 -->P_0079 text
 <--P_OK_CODE text
form user_ok_tc using p_tc_name type dynfnam
 p_table_name
 changing p_ok_code like sy-ucomm.
 data: l_ok type sy-ucomm,
 l_offset type i.
 search p_ok_code for p_tc_name.
 if sy-subrc <> 0.
 exit.
 endif.
 l_offset = strlen( p_tc_name ) + 1.
 l_ok = p_ok_code+l_offset.
 case l_ok.
 when 'P--' or "top of list
 'P-' or "previous page
 'P+' or "next page
 'P++'. "bottom of list
 perform compute_scrolling_in_tc using p_tc_name
 l_ok.
 clear p_ok_code.
 endcase.
endform. " user_ok_tc
*& Form compute_scrolling_in_tc
 text
 -->P_P_TC_NAME text
 -->P_L_OK text
form compute_scrolling_in_tc using p_tc_name
 p_ok_code.
 data l_tc_new_top_line type i.
 data l_tc_name like feld-name.
 data l_tc_lines_name like feld-name.
 data l_tc_field_name like feld-name.
 field-symbols <tc> type cxtab_control.
 field-symbols <lines> type i.
 assign (p_tc_name) to <tc>.
 concatenate 'G_' p_tc_name '_LINES' into l_tc_lines_name.
 assign (l_tc_lines_name) to <lines>.
 if <tc>-lines = 0.
 l_tc_new_top_line = 1.
 else.
 call function 'SCROLLING_IN_TABLE'
 exporting
 entry_act = <tc>-top_line
 entry_from = 1
 entry_to = <tc>-lines
 last_page_full = 'X'
 loops = <lines>
 ok_code = p_ok_code
 overlapping = 'X'
 importing
 entry_new = l_tc_new_top_line
 exceptions
 others = 0.
 endif.
 get cursor field l_tc_field_name
 area l_tc_name.
 if syst-subrc = 0.
 if l_tc_name = p_tc_name.
 set cursor field l_tc_field_name line 1.
 endif.
 endif.
 <tc>-top_line = l_tc_new_top_line.
endform. " COMPUTE_SCROLLING_IN_TC
Thanks

How to use selection column in a table control

I have given the name of the selection column to be 'DEF_SEL',now i want to select rows in the table control using the 'selection column attribute' and maniupulate it programmatically so that i would transport the rows selected using selection coulmn to a different table control.How would i do this?

Hi raja,
Once you have the table cobtrol built using the extra field in the internal table, all the selected rows will have DEF_SEL = 'X'.
Now you can loop your internal table and filter the records which were selected.
in pai modules:
loop at itab where DEF_SEL = 'X'.
Move itab information inrto another internal table.
append itab_new.
endloop.
have another table control which shows the data in the itab_new.
regards,
Ravi

Copy selected values from a table control into another table control

hi there,
as seen in the subject i need to copy selected values from a table control into another table control in the same screen. as i dont know much about table controls i made 2 table controls with the wizard and started to change the code... right now im totally messed up. nothing works anymore and i don't know where to start over.
i looked up the forums and google, but there is nothing to help me with this problem (or i suck in searching the internet for solutions)
i have 2 buttons. one to push the selected data from the top table control into the bottom tc and the other button is to push selected data from the bottom tc into the top tc. does somebody has a sample code to do this?

you're funny
i still don't get it... can't believe, there is no tutorial or sample code around how to copy multiple selected rows from a tc.
here's my code, maybe you can tell me exactly were i have to change it:
tc1 = upper table control
tc2 = lower table control
SCREEN 0100:
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE get_nfo. --> gets data from the dictionary table
MODULE tc1_change_tc_attr.
LOOP AT   it_roles_tc1
       INTO wa_roles_tc1
       WITH CONTROL tc1
       CURSOR tc1-current_line.
ENDLOOP.
MODULE tc2_change_tc_attr.
LOOP AT   it_roles_tc2
       INTO wa_roles_tc2l
       WITH CONTROL tc2
       CURSOR tc2-current_line.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT it_roles_tc1.
    CHAIN.
      FIELD wa_roles_tc1-agr_name.
      FIELD wa_roles_tc1-text.
    ENDCHAIN.
    FIELD wa_roles_tc1-mark
      MODULE tc1_mark ON REQUEST.
ENDLOOP.
LOOP AT it_roles_tc2.
    CHAIN.
      FIELD wa_roles_tc2-agr_name.
      FIELD wa_roles_tc2-text.
    ENDCHAIN.
    FIELD wa_roles_tc2-mark
      MODULE tc2_mark ON REQUEST.
ENDLOOP.
MODULE ok_code.
MODULE user_command_0100.
INCLUDE PAI:
MODULE tc1_mark INPUT.
IF tc1-line_sel_mode = 2
AND wa_roles_tc1-mark = 'X'.
    LOOP AT it_roles_tc1 INTO g_tc1_wa2
      WHERE mark = 'X'.    -
> big problem here is, that no entry has an 'X' there
      g_tc1_wa2-mark = ''.
      MODIFY it_roles_tc1
        FROM g_tc1_wa2
        TRANSPORTING mark.
    ENDLOOP.
ENDIF.
MODIFY it_roles_tc1
    FROM wa_roles_tc1
    INDEX tc1-current_line
    TRANSPORTING mark.
ENDMODULE.                    "TC1_MARK INPUT
MODULE tc2_mark INPUT.
IF tc2-line_sel_mode = 2
AND wa_roles_tc2-mark = 'X'.
    LOOP AT it_roles_tc2 INTO g_tc2_wa2
      WHERE mark = 'X'.             -
> same here, it doesn't gets any data
      g_tc2_wa2-mark = ''.
      MODIFY it_roles_tc2
        FROM g_tc2_wa2
        TRANSPORTING mark.
    ENDLOOP.
ENDIF.
MODIFY it_roles_tc2
    FROM wa_roles_tc2
    INDEX tc2-current_line
    TRANSPORTING mark.
ENDMODULE.
thx for anybody who can help with this!

How to select perticular row in table control for BDC

Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP

Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP

Add a new record to table control

Dear all,
How to add a new blank record to a table control?
Following code is not working for adding a new blank record to a table control
MODULE USER_COMMAND_0100 INPUT.
    SAVE_OK = OK_CODE.
    CLEAR OK_CODE.
    CASE SAVE_OK.
      WHEN 'EXIT'.
        LEAVE PROGRAM.
      WHEN 'APND'.             " A button "Add" to add a new record to table control
        REFRESH IT_KNA1.
        CLEAR IT_KNA1.
        APPEND IT_KNA1.
    ENDCASE.
ENDMODULE.
Thanks you

Hope you have done all table control specific coding
refer this example program
http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5e35c111d1829f0000e829fbfe/content.htm

Copy selected lines in the table control

Hi friends,
I Have a screen 200 in which i have a button COPY and table control.
In my table control i have 6 lines of data.
now my requirement is when i select any lines ie : let us say i ahve selected 1 , 3 , 5 lines of my table control and when i click on the button COPY of that screen. i need those 3 selected lines 1 , 3 , 5 to be copied again in the table control
example :
line 1         selected
line2
line3          selected
line4
line5          selected .
line6
now my table control should be
line1
line2
line3
line4
line5
line6
line1
line3
line5
How can i do that
Regards
Priyanka.

I have similar issue...i need help how to accomplish automatic addition on every line. example (see below)
this is how it looks right now
DATE    EMPLOYEE       DEPT JOB     LOT     OPER#     LX_HRS     OP_SETUP     LX_TYPE     COMPLETE
2/23/2009     M.Paquiao   NB         1960     001     10             1.50                14.00                     S                      NO
2/24/2009                                                      1.00             14.00                  S                        NO
2/25/2009                                                      4.50                14.00                  S                    NO
2/27/2009                                                      3.00             14.00                  S                        NO
2/28/2009                                                      1.50             14.00                  R                       YES
3/1/2009                                                      2.00             14.00                  R                  YES
this what I need it to do when I meant automatic addition of each line:
DATE   EMPLOYEE     DEPT     JOB     LOT     OPER#     LX_HRS     OP_SETUP     LX_TYPE     COMPLETE
2/23/2009     M.Paquiao      NB        1960     001     10             1.50        14.00               S         NO
2/24/2009                                                      2.50             14.00                  S             NO
2/25/2009                                                      7.00        14.00                  S             NO
2/27/2009                                                      10.00     14.00               S             NO
2/28/2009                                                      11.50     14.00               R             YES
3/1/2009                                                      13.50     14.00               R             YES
As you can see everything is the same but on column LX_HRS, the first example one is not doing anything addition but on the second example is now doing addition. This additions were done manually, how can I tell crystal to add each line, in the example above, the
first example                                              second example: (addition is involved)
date                lx_hrs                                  date                  lx_hrs
2/23/09           1.50                                     2/23/09              1.50
2/24/09           1.00                                     2/24/09              2.50 (sum of : 1.50 + 1.00 was added)
2/25/09           4.50                                     2/25/09              7.00 (sum of 2.50 (on date 2/24/09 & 4.50 from date 2/25/09 of the first example).

How to update record in Table control

Dear Friends,
I have table control that has space for 10 records but i need to update 15 record from the flat file which is getting into the table how can i do this.
Regards,
MAHENDRA.

Hi,
you record for an item and then click on page down and save it.use the loop on this bdc to populate the the bdc table no need to do manually.
LOOP AT l_i_dettab_item INTO l_wa_dettab_item..
      l_cursor = l_cursor + 1.
      IF l_cursor GT 1.
        PERFORM bdc_field       USING 'BDC_OKCODE'
                               '=P+'.
      ENDIF.
      PERFORM cursor_pos_notation    USING 'V_EAN_DET001- GTIN_VARIANT_TYP'
                                              l_cursor
                                    CHANGING l_cursor_notation.
      PERFORM cursor_pos_notation    USING 'V_EAN_DET001-VTWEG'
                                              l_cursor
                                    CHANGING l_cursor_notation.
      PERFORM bdc_field       USING l_cursor_notation
                                    l_wa_dettab_item-vtweg.
      PERFORM cursor_pos_notation    USING 'V_EAN_DET001-DATEFROM'
                                              l_cursor
                                    CHANGING l_cursor_notation.
         PERFORM bdc_field       USING l_cursor_notation
                                    l_v_date.
      PERFORM bdc_field       USING 'BDC_CURSOR'
                                    l_cursor_notation.
      PERFORM bdc_field       USING 'BDC_OKCODE'
                                    '=SAVE'.
    ENDLOOP.
Here my ok code for page down is =P+ so i am looping on the table control data and then populating the bdc table after this i will populate the remaing info required for the call transaction and refresh bdcdata.
thats it no need to do recording 1000 times.
now if u do like this it doesn't depend on the number of records on table control.
it will take all the records.
Reward if useful.
Regards,
sasi
Regards,
sasi

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

BDC for existing record in table control

Hi,
I have a requirement to change existing records in table control through BDC. Is there any way I can choose the respective record from Table Control through BDC dynamically.
Regards
Akash

/J4I/015PER, this transaction is used for adding permits to Operation in WEC. It has list of operations in Table Control. Permit can be added for choosing the operation from table control.
Our custom program is designed to add permits for the operation. So if I have to use the above transaction for adding permits, then first I have to choose the correct operation from the table control and then add permit.

BDC Recording for Table Control

dears,
I am using BDC for posting payments by TCode FP05.
after processing two payment items i am getting the following error.
"Runtime error SAPSQL_ARRAY_INSERT_DUPREC has occurred"
but when i repeat the same recording in foreground it processes the payment sucessfully.
wht could be wrong with the recording?
how to record for table control?
Bye

Hi Syed,
I could find few notes for the array insert duplicate runtime error.
136433
191544
You can find may in OSS.
Cheers
Vinod

How to execute multiple records in table control

HI.
I have a requirement that in table control user will select more than one row and when he clicks 'SAVE' it should go and sit in a custom table. how to pass more than one records.
thanks & regards.
sandeep

Hi Sandeep,
I understand your requirement .......
See this standard program........
" DEMO_DYNPRO_TABCONT_LOOP_AT "
Understand how DELETE button is working,inorder to delete multiple lines....Copy this program if necessary..OK.
Simply,Replace DELETE statement with your INSERT statement to push records into your custom table....very easily you can do it.
Reward all helpful answers.
Hope you problem is solved.
Regards,
V.Raghavender.

Reading selected data in the table control

Hi Friends,
I have final data in my table control now the user wants to select only few records from the displayed data, for that I kept a check box for selection, But my question is I am unable to read the selected data.
Actually user requirement is he has to update only the selected data from the displayed data in the table control.
Can any one tell me how to read the selected records after displaying in the table control.
Thanx in advance,
Line

Hi
If your table control has a check box, your internal table should have a field for it. Its value will be X if the checkbox is setted else it'll be SPACE.
So in the PAI u should read only the records where that flag is X:
LOOP AT ITAB WHERE MARK = 'X'.
ENDLOOP.
Max

Selection of records in TABLE CONTROL.

Similar Messages

Maybe you are looking for