Selection of rows in ALV grid (class CL_GRID_CATSXT)

Hi all,
The CATS transaction CATS_APPR_LITE is using the class CL_GRID_CATSXT, method GET_SELECTED_ROWS, to retrieve selected rows in the ALV report.
The user/manager selects these rows to approve the work hours registered by his subordinates. He can only select and approve those rows that have been fully expanded, meaning he cannot select and approve total lines. (If he tries to do so, nothing happens).
I have created a layout that shows only total lines per employee. Using this layout the manager should be able to select the total line for a particular employee and press the "Approve" button. In this way, I need to get a hold of the rows contained in the total line, meaning I need the row numbers of the actual rows which have been added up in the total line.
Does anyone know how to do this...? As mentioned earlier, the CATS_APPR_LITE transaction is using class CL_GRID_CATSXT, method GET_SELECTED_ROWS.
All helpful answers will be rewarded!
Best regards,
MV

I guess method GET_SELECTED_ROWS returns the total lines when they are selected ?
if so, you just have to do a LOOP on your internal table having same key fields as selected total line

Similar Messages

Select single row in ALV grid

ABAPer's ,
Does anyone can guide me to select single row only in ALV grid , without OO.

Hello,
I did not get u.
But check the below code it may help u.
tables: mara.
TYPE-POOLS: SLIS.
data:repid like sy-repid.
data: itb type mara occurs 0 with header line,
IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV WITH HEADER LINE,
IT_LAYOUT TYPE SLIS_LAYOUT_ALV,
ITB1 TYPE MAKT OCCURS 0 WITH HEADER LINE.
selection-screen begin of block b.
parameters: p_matnr type matnr.
selection-screen end of block b.
select * from mara into table itb where matnr = p_matnr.
SELECT * FROM MAKT INTO TABLE ITB1 WHERE MATNR = P_MATNR.
repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
   I_CALLBACK_PROGRAM             = repid
I_CALLBACK_PF_STATUS_SET       = ' '
   I_CALLBACK_USER_COMMAND        = 'HANDLE_USER_COMMAND'
   I_STRUCTURE_NAME               = 'MARA'
   IS_LAYOUT                      = IT_LAYOUT
   IT_FIELDCAT                    = IT_FIELDCAT[]
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    t_outtab                       = itb
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM HANDLE_USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE
SLIS_SELFIELD.
CASE R_UCOMM.
WHEN '&IC1'.
CLEAR IT_FIELDCAT[].
IF RS_SELFIELD-FIELDNAME = 'MATNR'.
READ TABLE ITB1 INDEX RS_SELFIELD-TABINDEX.
WRITE: / ITB1-MAKTX.
ENDIF.
ENDCASE.
ENDFORM. "HANDLE_USER_COMMAND
Regards

Selecting Multiple Rows from ALV GRID Display

Hi,
I am having a ALV GRID Display. I want to select multiple rows from the Output and move them to an internal table.
Please let me know how do I acheive this.
Thanks in advance,
Ishaq.

Hi,
Have a look on the following code. It displays the selected rows which hv been selected in basic list.
TABLES:
spfli.
TYPE-POOLS:
slis.
DATA:
BEGIN OF t_spfli OCCURS 0,
    checkbox.
        INCLUDE STRUCTURE spfli.
DATA: END OF t_spfli.
DATA:
t_sspfli LIKE STANDARD TABLE OF t_spfli .
DATA:
fs_spfli LIKE LINE OF t_sspfli.
DATA:
fs_layout TYPE slis_layout_alv,
w_program TYPE sy-repid.
SELECT *
FROM spfli
INTO CORRESPONDING FIELDS OF TABLE t_spfli.
*fs_layout-info_fieldname = 'COLOR'.
fs_layout-box_fieldname = 'CHECKBOX'.
w_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
    i_callback_program       = w_program
    i_callback_pf_status_set = 'FLIGHT'
    i_callback_user_command = 'SPFLI_INFO'
    i_structure_name         = 'SPFLI'
    is_layout                = fs_layout
TABLES
    t_outtab                 = t_spfli
EXCEPTIONS
    program_error            = 1
    OTHERS                   = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*&      Form FLIGHT
      text
     -->RT_EXTAB   text
FORM flight    USING rt_extab TYPE slis_t_extab..
SET PF-STATUS 'FLIGHT' EXCLUDING rt_extab.
ENDFORM.                    "FLIGHT
*&      Form SPFLI_INFO
      text
     -->UCOMM      text
     -->SELFIELD   text
FORM spfli_info USING ucomm LIKE sy-ucomm
                       selfield TYPE slis_selfield.
selfield-refresh = 'X'.
CASE ucomm.
    WHEN 'FLIGHT'.
      LOOP AT t_spfli.
        IF t_spfli-checkbox = 'X'.
          t_spfli-checkbox = ' '.
         t_spfli-color = 'C51'.
          MODIFY t_spfli TRANSPORTING checkbox.
          fs_spfli = t_spfli.
          APPEND fs_spfli TO t_sspfli.
        ENDIF.
      ENDLOOP.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
CLEAR fs_spfli.
fs_layout-info_fieldname = 'COLOR'.
fs_layout-confirmation_prompt = 'X'.
fs_layout-key_hotspot = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program = w_program
      i_structure_name   = 'SFLIGHT'
      is_layout          = fs_layout
    TABLES
      t_outtab           = t_sspfli
    EXCEPTIONS
      program_error      = 1
      OTHERS             = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH t_sspfli.
ENDFORM.                    "SPFLI_INFO
Regards,
Chandu

Selecting multiple rows in ALV grid display

Hi,
I have an ALV grid display in my report.
My grid contains multiple rows.
I have to select multiple rows at a time, to perform some operations on the selected rows.
How can it be achieved?
Thanks,
Sandeep.

Hi ,
you have to use a box fieldname in the report to be able to select multiple lines at a time :
- in your internal table declaration put the first field as 'box_fieldname' of type c1
- then in your work area for layout add, lwa_layout-box_fieldname = 'box_fieldname'
- in the perform for handling user commands, all selected lines will have an "X" in the field name 'box_fieldname'
Thanks and Regards,
Dev.

Selecting multiple rows in alv grid

my requirement is i want to send the data from alv grid to smartforms using check boxes from report output but without using either oo framework or layout-box_fieldname.can anybody give me the solution?

in fieldcatalog you have to use CHECKBOX = 'X' INPUT = 'X' and EDIT = 'X' for the columns which ever you want to be check box .
You need use the Function moduel in the user command to get the updated data with checked value.
GET_GLOBALS_FROM_SLVC_FULLSCR
follow the sample code.
REPORT ZTEST_ALV_CHECK MESSAGE-ID ZZ .
TYPE-POOLS: SLIS.
DATA: X_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
L_LAYOUT TYPE SLIS_LAYOUT_ALV,
X_EVENTS TYPE SLIS_ALV_EVENT,
IT_EVENTS TYPE SLIS_T_EVENT.
DATA: BEGIN OF ITAB OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
CHK(1),
color(4),
END OF ITAB.
SELECT VBELN
POSNR
FROM VBAP
UP TO 20 ROWS
INTO TABLE ITAB.
X_FIELDCAT-FIELDNAME = 'CHK'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 1.
X_FIELDCAT-INPUT = 'X'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-CHECKBOX = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-SELTEXT_L = 'VBELN'.
X_FIELDCAT-HOTSPOT = 'X'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 2.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-SELTEXT_L = 'POSNR'.
X_FIELDCAT-TABNAME = 'ITAB'.
X_FIELDCAT-COL_POS = 3.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_LAYOUT-info_fieldname = 'COLOR'.
*L_LAYOUT-ZEBRA = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
IS_LAYOUT = L_LAYOUT
I_CALLBACK_PF_STATUS_SET = 'STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = ITAB
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM STATUS USING P_EXTAB TYPE SLIS_T_EXTAB.
"Copy the standard program SAPLKKBL , STANDARD status to your program
SET PF-STATUS 'STATUS'.
ENDFORM. " STATUS
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
DATA: GD_REPID LIKE SY-REPID, "Exists
REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA .
ENDIF.
loop at itab where chk = 'X'.
"collect all the records to an internal table here..
endloop.
"Now call your smartform here using SSFFunction module and the get the dynamic function . From there call the Function with the selected values, to show the smartform
RS_SELFIELD-refresh = 'X'.
break-point.
ENDFORM. "USER_COMMAND
Regards
Vijay Babu Dudla

Problem in selecting rows in ALV Grid

Hi All,
I am doing a ALV Grid program using Classes. when i select 2 rows from that grid and executes,
it going next screen. Again when i am using back button and selecting same rows or different rows from teh same Grid and executing it is not retrieving any rows. In dedugger it is showing that the there is no selection of rows.
Please suggest me the solution.
Thanks in advance,
Regards,
Balaji.

Hi chaitanya,
I am not clearing any code.
please find the code...
CALL METHOD g_grid1->get_selected_rows
        IMPORTING
          et_index_rows = w_lvc_t_row_1.
      IF w_lvc_t_row_1 IS INITIAL.
        MESSAGE e004(zmsg).
      ELSE.
        CLEAR it_memis1-signal.
        REFRESH po_memis1.
        LOOP AT w_lvc_t_row_1 INTO w_lvc_s_row_1.
          READ TABLE it_memis1 INTO po_memis1 INDEX w_lvc_s_row_1-index.
          SELECT SINGLE name INTO v_nam FROM icon WHERE id = po_memis1-signal.
          IF v_nam = 'ICON_LED_GREEN' OR v_nam = 'ICON_LED_YELLOW'.
            APPEND po_memis1.
            CLEAR po_memis1-signal.
          ELSE.
            MESSAGE 'This item Cannot be processed due to errors' TYPE 'E'.
          ENDIF.
        ENDLOOP.
      ENDIF.
regards,
Balaji.

HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID?

HI.
HOW CAN I HAVE THE NUMBER OF SELECTED ROWS IN ALV GRID????
GABRY =)

You need to use
data : grid1 type ref to cl_gui_alv_grid.
call method grid1->get_selected_rows
importing
et_index_rows = i_sel_alvrows[].
a®

How to capture multiple rows of ALV grid when user selected?

Actually,It is easy to get one single line.However, my user wants select several lines of ALV grid by condition . i need to process the selected lines ,so i need to put these lines into an internal table. But now, i have no idea to capture the lines.
What method for an ALV Grid will return the lines the user has selected?
Appreciate for your help!
Edited by: Heyman52 on Aug 25, 2010 4:28 AM
Edited by: Heyman52 on Aug 25, 2010 4:30 AM

Hi,
Once user selects multiple rows and press another button for further execution, you can modify your internal table with marked rows using selection column.
You need to add user command code in your ALV grid call. Please refer below code.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
      EXPORTING
        I_CALLBACK_PROGRAM       = SY-REPID
        I_CALLBACK_PF_STATUS_SET = 'F_GUI_STATUS'
        I_CALLBACK_USER_COMMAND = 'F_USERCOMMAND'
        I_GRID_TITLE             = TEXT-026
        IS_LAYOUT                = WA_LAYOUT
        IT_FIELDCAT              = I_FIELDCAT
      TABLES
        T_OUTTAB                 = I_OUTTAB
      EXCEPTIONS
        PROGRAM_ERROR            = 1
        OTHERS                   = 2.
    IF SY-SUBRC NE 0.
      MESSAGE S475 DISPLAY LIKE 'E'.
      LEAVE LIST-PROCESSING.
    ENDIF.
*- User command for details display.
    PERFORM F_USERCOMMAND USING I_UCOMM
                                I_SELFIELD.
FORM F_USERCOMMAND USING FP_R_UCOMM LIKE SY-UCOMM
                         FP_SELFIELD TYPE SLIS_SELFIELD.
IF L_V_REF_GRID IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        E_GRID = L_V_REF_GRID.
ENDIF.
IF NOT L_V_REF_GRID IS INITIAL.
    CALL METHOD L_V_REF_GRID->CHECK_CHANGED_DATA.
ENDIF.
ENDFORM.
You can then read your final internal table as below and take the selected records in another internal table.
LOOP AT I_OUTTAB ASSIGNING <FS_OUTTAB> WHERE SEL EQ 'X'.
        APPEND <FS_OUTTAB> TO I_CHECK.
      ENDLOOP.
Edited by: Archana Pawar on Aug 25, 2010 11:16 AM

How to select multiple row in ALV report

Hi friends,
1. How to select multiple row in ALV report
               ( How to set tab in ALV report and want to select multiple line.)
Thanking you.
Subash

Hi Sahoo,
If you are using the class CL_GUI_ALV_GRID. In methods SET_TABLE_FOR_FIRST_DISPLAY.
in layout structure you will find field SEL_MODE
pass :
LS_LAYOUT-SEL_MODE = 'A'.
In PAI.
CALL METHOD GRID->GET_SELECTED_ROWS
    IMPORTING
      ET_INDEX_ROWS = T_ROWS
      ET_ROW_NO     = T_ROWID.
Hope these will solve your problem.
Regards,
Kumar M.

Reset lead selection after refresh in alv grid

Hi experts,
I've a problem with holding the lead selection in an alv grid table view in web dynpro.
After changing an attribute the lead selection in the view gets lost, but is hold in the referenced context node.
Is there a way to change the lead selection in alv by code?
I've found the method "set_index()" in class CL_SALV_WD_TABLE_LEAD_SELECT, can I use that?
Thanks a lot,
Kai

Hi Kai,
I faced a similar problem earlier.
Request you to elaborate about the "attribute" you are changing.
I was also facing a similar issue.
It will be gr8 if I can help you.
Please see the below thread for some reference.
[Not able to select a row in ALV|Not able to select a row in ALV?;
I hope it helps.
Regards,
Sumit Oberoi

Color a row with ALV GRID

Hi my friends,
I have written a small ALV Grid where some rows should be colored, dependend on their status in a table. But it's not working and I can't find out, why it is not working. I've already studied all the topics in this forum, which are related to 'row color alv grid', but I can't find the mistake in my code. Is anyone able to find out what is wrong here?
Thanks a lot for your help!
*& Report /BMC_TST_SHOWLOG
REPORT /BMC_TST_SHOWLOG.
TYPES: BEGIN OF log_table.
TYPES: log_level TYPE /bmc_log_message,
          cr_date TYPE /bmc_cr_date,
          message TYPE /bmc_log_message,
          linecolor(4) TYPE c.
TYPES: END OF log_table.
DATA: lt_log TYPE TABLE OF log_table with HEADER LINE,
      lt_log2 TYPE TABLE OF log_table with HEADER LINE,
      lt_log_list TYPE TABLE OF log_table,
      lt_line LIKE LINE OF lt_log_list,
      container_r TYPE REF TO cl_gui_custom_container,
      grid_r TYPE REF TO cl_gui_alv_grid,
      gc_custom_control_name TYPE scrfname VALUE 'CONTAINER_LOG',
      fieldcat_r TYPE lvc_t_fcat,
      layout_r TYPE lvc_s_layo,
      logA TYPE /bmc_log_level,
      logB TYPE /bmc_log_level,
      logC TYPE /bmc_log_level,
      logD TYPE /bmc_log_level,
      logE TYPE /bmc_log_level,
      ls_ct TYPE lvc_s_scol,
      ok_code LIKE sy-ucomm.
*DATA BEGIN OF ls_log_list OCCURS 0.
*DATA: log_level TYPE /bmc_log_message,
*      cr_date TYPE /bmc_cr_date,
*      message TYPE /bmc_log_message,
*      rowcolor(4) TYPE c.
*DATA END OF ls_log_list.
*DATA: lt_log_list TYPE TABLE OF log_table.
PARAMETERS: loglevlA TYPE c AS CHECKBOX,
            loglevlB TYPE c as CHECKBOX,
            loglevlC TYPE c As CHECKBOX,
            loglevlD TYPE c aS CHECKBOX,
            loglevlE TYPE c AS CHECKBOX,
            dateA     TYPE /bmc_cr_date OBLIGATORY,
            dateB     TYPE /bmc_cr_date.
CALL SCREEN 0200.
MODULE user_command_0200 INPUT.
CASE ok_code.
    WHEN 'BACK'.
      SET SCREEN 0.
      MESSAGE ID 'BC400' TYPE 'S' NUMBER '057'.
    WHEN OTHERS.
ENDCASE.
ENDMODULE.
MODULE clear_ok_code OUTPUT.
CLEAR ok_code.
ENDMODULE.
MODULE status_0200 OUTPUT.
SET PF-STATUS 'DYNPRO200'.
SET TITLEBAR 'D0200'.
ENDMODULE.
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE.
FORM display_alv.
IF grid_r IS INITIAL.
*----Creating custom container instance
CREATE OBJECT container_r
EXPORTING
    container_name = gc_custom_control_name
EXCEPTIONS
    cntl_error = 1
    cntl_system_error = 2
    create_error = 3
    lifetime_error = 4
    lifetime_dynpro_dynpro_link = 5
    others = 6.
    IF sy-subrc <> 0.
*--Exception handling
    ENDIF.
*----Creating ALV Grid instance
    CREATE OBJECT grid_r
    EXPORTING
      i_parent = container_r
    EXCEPTIONS
      error_cntl_create = 1
      error_cntl_init = 2
      error_cntl_link = 3
      error_dp_create = 4
      others = 5.
      IF sy-subrc <> 0.
*--Exception handling
      ENDIF.
      PERFORM get_log_data.
*----Preparing field catalog.
      PERFORM prepare_field_catalog CHANGING fieldcat_r.
*----Preparing layout structure
      PERFORM prepare_layout CHANGING layout_r.
*----Here will be additional preparations
*--e.g. initial sorting criteria, initial filtering criteria, excluding
*--functions
      CALL METHOD grid_r->set_table_for_first_display
      EXPORTING
        is_layout = layout_r
      CHANGING
        it_outtab = lt_log2[]
        it_fieldcatalog = fieldcat_r
      EXCEPTIONS
        invalid_parameter_combination = 1
        program_error = 2
        too_many_lines = 3
        OTHERS = 4.
      IF sy-subrc <> 0.
*--Exception handling
      ENDIF.
      ELSE.
        CALL METHOD grid_r->refresh_table_display
      EXCEPTIONS
        finished = 1
        OTHERS = 2.
      IF sy-subrc <> 0.
*--Exception handling
      ENDIF.
    ENDIF.
    CALL METHOD grid_r->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    CALL METHOD grid_r->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDFORM.
FORM prepare_field_catalog CHANGING pt_fieldcat TYPE lvc_t_fcat.
    DATA ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
    i_structure_name = '/BMC_LOG'
CHANGING
    ct_fieldcat = pt_fieldcat[]
EXCEPTIONS
    inconsistent_interface = 1
    program_error = 2
    OTHERS = 3.
IF sy-subrc ne 0.
*--Exception handling
ENDIF.
LOOP AT pt_fieldcat INTO ls_fcat.
    CASE ls_fcat-fieldname.
      WHEN 'UUID'.
        ls_fcat-no_out = 'X'.
        MODIFY pt_fieldcat FROM ls_fcat.
      WHEN 'LOG_LEVEL'.
        ls_fcat-coltext = 'Meldungsart'.
        ls_fcat-outputlen = '25'.
        MODIFY pt_fieldcat FROM ls_fcat.
      WHEN 'CR_DATE'.
        ls_fcat-coltext = 'Erstellungsdatum'.
        ls_fcat-outputlen = '20'.
        MODIFY pt_fieldcat FROM ls_fcat.
      WHEN 'CR_TIME'.
        ls_fcat-no_out = 'X'.
        MODIFY pt_fieldcat FROM ls_fcat.
      WHEN 'MESSAGE'.
        ls_fcat-coltext = 'Nachricht'.
        ls_fcat-outputlen = '50'.
        MODIFY pt_fieldcat FROM ls_fcat.
    ENDCASE.
*    CASE ls_fcat-value.
*      WHEN '1'.
*        ls_fcat-line_color = 'c100'.
*    ENDCASE.
ENDLOOP.
ENDFORM.
FORM prepare_layout CHANGING ps_layout TYPE lvc_s_layo.
ps_layout-zebra = 'X'.
ps_layout-grid_title = 'Log'.
ps_layout-smalltitle = 'X'.
ps_layout-info_fname = 'linecolor'.
ENDFORM.
FORM get_log_data.
if loglevlA = 'X'.
    logA = '1'.
ENDIF.
if loglevlB = 'X'.
    logB = '2'.
ENDIF.
if loglevlC = 'X'.
    logC = '3'.
ENDIF.
if loglevlD = 'X'.
    logD = '4'.
ENDIF.
if loglevlE = 'X'.
    logE = '5'.
ENDIF.
IF dateB ne 0.
    SELECT log_level cr_date message FROM /bmc_log INTO CORRESPONDING FIELDS OF TABLE lt_log_list WHERE log_level = logA
      OR log_level = logB OR log_level = logC OR log_level = logD OR log_level = logE and cr_date >= dateA and cr_date <= dateB.
ELSE.
    SELECT log_level cr_date message FROM /bmc_log INTO CORRESPONDING FIELDS OF TABLE lt_log_list WHERE log_level = logA
      OR log_level = logB OR log_level = logC OR log_level = logD OR log_level = logE and cr_date >= dateA.
ENDIF.
*    and cr_date >= dateA.
    SORT lt_log_list ASCENDING.
    LOOP AT lt_log_list INTO lt_line.
    IF lt_line-log_level = '1'.
      lt_line-log_level = 'Info'.
      lt_line-linecolor = 'C100'.
    ENDIF.
    IF lt_line-log_level = '2'.
      lt_line-log_level = 'Warning'.
      lt_line-linecolor = 'C200'.
    ENDIF.
    IF lt_line-log_level = '3'.
      lt_line-log_level = 'Error'.
      lt_line-linecolor = 'C300'.
    ENDIF.
    IF lt_line-log_level = '4'.
      lt_line-log_level = 'Debug'.
      lt_line-linecolor = 'C400'.
    ENDIF.
    IF lt_line-log_level = '5'.
      lt_line-log_level = 'Trace'.
      lt_line-linecolor = 'C500'.
    ENDIF.
    APPEND lt_line TO lt_log2.
    ENDLOOP.
ENDFORM.
SELECTION-SCREEN BEGIN OF SCREEN 0100 TITLE text-001 AS WINDOW.
SELECTION-SCREEN END OF SCREEN 0100.

> change to this
>
> <b>ps_layout-stylefname = 'LINECOLOR'.</b>
>
> sorry ignore the above line
>
> just debug and check what is happening
>
> Message was edited by:
>         Chandrasekhar Jagarlamudi
Hi,
I've changed the line to <b>ps_layout-stylefname = 'LINECOLOR'.</b>, but then I'm getting a runtime error 'ASSIGN_TYPE_CONFLICT' in program 'SAPLSLVC in line 2975'...
I don't have any idea what is causing that.

Select multiple rows in a grid

Hi All,
I want to select multiple rows in a grid on click of a button, there is no checkbox there are multiple rows which need to be selected like we do on pressing shift key on the keyboard. Please suggest how can this be done.
thanks in advance.
Regards,
Anju

Hi Anju,
You can check this link to solve your problem:
https://wiki.sdn.sap.com/wiki/display/Snippets/ALV%2bGrid%2bDisplay%2bwith%2bcheckbox%2bto%2bprocess%2bselected%2brecords%2bat%2bruntime
Hope it helps you.
Thanks & Regards,
Sarita Singh Rathour

Default 10 rows in ALV grid

Hi Group,
My requirement is to show 10 default rows in ALV grid (with 4 fields in ALV grid), whenever Create radio button is selected in Selection Screen.
Please could you help me with this.
Thanks and Regards,
Kumar.

Thanks for your reply.
Sorry I forgot to mention earlier.
I have to show default 10 empty rows (editable) whenever the Create radio button is selected on the Sel Screen.
Kindly assist with this regard.
Thanks and Regards,
Kumar.

How to apply List box for multiple selection of rows in ALV report ?

Hi Exprots,
1: How to apply List box for multiple selection of rows in ALV report ?
Thanking you.
Subash

hi,
check the below program.
REPORT zalv_dropdowns.
*Type pools declarations for ALV
TYPE-POOLS : slis.
*data declarations for ALV container,ALV grid, Fieldcatalogues & layout
DATA: g_grid TYPE REF TO cl_gui_alv_grid,
      g_custom_container TYPE REF TO cl_gui_custom_container,
      gt_fieldcat TYPE lvc_t_fcat,
      gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
      wa_outtab TYPE t517a.
START-OF-SELECTION.*Call to ALV
CALL SCREEN 600.*On this statement double click it takes you to the screen painter SE51.
*Create a Custom container and name it CCONT and OK code as OK_CODE.
*Save check and Activate the screen painter.
*Now a normal screen with number 600 is created which holds the ALV grid.
PBO of the actual screen , Here we can give a title and customized menus
Here we also call the subroutine for ALV output.
      MODULE PBO OUTPUT                                             *
MODULE pbo OUTPUT.
PERFORM alv_output.
ENDMODULE.                    "pbo OUTPUT
      MODULE PAI INPUT                                              *
MODULE pai INPUT.
ENDMODULE.                    "pai INPUT
*&      Form BUILD_FIELDCAT
FORM build_fieldcat.
DATA ls_fcat TYPE lvc_s_fcat.
*Build the field catalogue
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
    EXPORTING
      i_structure_name = 'T517A'
    CHANGING
      ct_fieldcat      = gt_fieldcat.
To assign dropdown in the fieldcataogue
LOOP AT gt_fieldcat INTO ls_fcat.
CASE ls_fcat-fieldname.
   WHEN 'SLART'.
*is the first list box
        ls_fcat-drdn_hndl = '1'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
is the second list box
WHEN 'ABART'.
        ls_fcat-drdn_hndl = '2'.
        ls_fcat-outputlen = 15.
        MODIFY gt_fieldcat FROM ls_fcat.
ENDCASE.
ENDLOOP.
ENDFORM.                    "build_fieldcat
*&      Form ALV_OUTPUT
FORM alv_output .*Create object for container
CREATE OBJECT g_custom_container
         EXPORTING container_name = 'CCONT'.
*create object for grid
CREATE OBJECT g_grid
         EXPORTING i_parent = g_custom_container.
Build fieldcat and set column
*Assign a handle for the dropdown listbox.
PERFORM build_fieldcat.
*Build layout
PERFORM build_layout.
Define a drop down table.
PERFORM dropdown_table.
*fetch values from the T517A table
SELECT * FROM t517a INTO TABLE gt_outtab.
*Display ALV output
CALL METHOD g_grid->set_table_for_first_display
    EXPORTING
      is_layout       = gs_layout
    CHANGING
      it_fieldcatalog = gt_fieldcat
      it_outtab       = gt_outtab.ENDFORM.                               "ALV_OUTPUT
*&      Form dropdown_table
      text
--> p1        text
<-- p2        text
FORM dropdown_table.*Declarations for drop down lists in ALV.
DATA: lt_dropdown TYPE lvc_t_drop,
        ls_dropdown TYPE lvc_s_drop.
First SLART listbox (handle '1').
ls_dropdown-handle = '1'.
ls_dropdown-value = '01 Primary school'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '02 Lower Secondary'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '1'.
ls_dropdown-value = '03 Upper Secondary'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '04 Professional School'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '05 College'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '06 University'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '1'.
ls_dropdown-value = '09 Other Establishment'.
APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2'). ls_dropdown-handle = '2'.
ls_dropdown-value = '10 Primary School certificate'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '20 Lower secondary/Junior high'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '30 High school diploma(B-levels)'.
APPEND ls_dropdown TO lt_dropdown.
ls_dropdown-handle = '2'.
ls_dropdown-value = '31 Vocational'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '32 Matriculation'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '40 Specialist vocational certificate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '50 College degree Level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '51 College degree Level2'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '52 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '60 Univ Degree level1'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '61 Bachelors degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '62 Masters degree'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '63 Licenciate'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '64 Doctors Degree Ph.D'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '89 None'.
APPEND ls_dropdown TO lt_dropdown. ls_dropdown-handle = '2'.
ls_dropdown-value = '90 Unknown'.
APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
CALL METHOD g_grid->set_drop_down_table
    EXPORTING
      it_drop_down = lt_dropdown.ENDFORM.                               " dropdown_table
*&      Form build_layout
      text
*layout for ALV output
FORM build_layout . gs_layout-cwidth_opt = 'X'.
gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
gs_layout-no_toolbar = 'X'.ENDFORM.                    " build_layout
endform.
Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM

Set specific rows in ALV grid ready for input

Hi everyone,
I have a question about how to set specific rows in ALV grid ready for input.
I know that I can make some columns ready for input before the ALV displayed,but I have no idea how to make specific rows displayed in the ALV ready for input.

Hello Aaron
For editable columns we can use the fieldcatalog (LVC_S_FCAT-EDIT = 'X') but for rows you need to define editability on cell level.
The required steps are documented in sample report BCALV_EDIT_02. Below I point out a few crucial points:
*§1.Extend your output table for a field, e.g., CELLTAB, that holds
*   information about the edit status of each cell for the
*   corresponding row (the table type is SORTED!).
DATA: BEGIN OF gt_outtab occurs 0. "with header line
        include structure sflight.
DATA: celltab type LVC_T_STYL.
DATA: END OF gt_outtab.
*§3.Provide the fieldname of the celltab field by using field
*   STYLEFNAME of the layout structure.
   gs_layout-stylefname = 'CELLTAB'.
   CALL METHOD grid1->set_table_for_first_display
         EXPORTING i_structure_name = 'SFLIGHT'
                   is_layout        = gs_layout
         CHANGING it_outtab        = gt_outtab[].
Note: in the sample report only field SEATSMAX is editable. In your case you need
to fill CELLTAB for all fields in a row.
*§2.After selecting data, set edit status for each row in a loop
*   according to field SEATSMAX.
LOOP AT gt_outtab.
    l_index = sy-tabix.
    refresh lt_celltab.
    if gt_outtab-seatsmax ge 300.
        perform fill_celltab using 'RW'
                             changing lt_celltab.
    else.
        perform fill_celltab using 'RO'
                             changing lt_celltab.
    endif.
*§2c.Copy your celltab to the celltab of the current row of gt_outtab.
    INSERT LINES OF lt_celltab INTO TABLE gt_outtab-celltab.
    MODIFY gt_outtab INDEX l_index.
ENDLOOP.
ENDFORM.                               " SELECT_DATA_AND_INIT_STYLE
NOTE: LVC_T_STYL is a SORTED table type. Thus, take care that you are using the
INSERT ... INTO TABLE statement and not APPEND (because then nothing is appended
to the CELLTAB itab).
IF p_mode EQ 'RW'.
*§2a.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_ENABLED to set a cell
*    to status "editable".
    l_mode = cl_gui_alv_grid=>mc_style_enabled.
ELSE. "p_mode eq 'RO'
*§2b.Use attribute CL_GUI_ALV_GRID=>MC_STYLE_DISABLED to set a cell
*    to status "non-editable".
    l_mode = cl_gui_alv_grid=>mc_style_disabled.
ENDIF.
ls_celltab-fieldname = 'SEATSMAX'.
ls_celltab-style = cl_gui_alv_grid=>mc_style_disabled.
INSERT ls_celltab INTO TABLE pt_celltab.
Regards
Uwe

Selection of rows in ALV grid (class CL_GRID_CATSXT)

Similar Messages

Maybe you are looking for