Selection of scheduling scenarios

Hi,
While scheduling my project using bottom up approach, the system defaults the method for plan method/ basic and plan method/fsct as "Bottom up (taking dates of higher level WBS into account).
Is there a way i can change this to "strict bottom up" as I need the system to adjust the dates of the WBS during scheduling (including reducing the duration)
thanks
Anand

In project profile Trnsaction code OPSA
In Plannin board board/dates tab
WBS time schedulling
Tick on with activities
In Planning method
put below values
Plan.meth/basic 4
Plan.meth/fcst 4
Calc. with act. 1
This profile will do the scedulling by Bottom up method only
Rgds

Similar Messages

Schedule Scenario

Hi All,
While creating/update scenario scheduling
does I have to update it also in agent on physical?
If so, Isn't a way to update it through the operator?

Hi Guys,
Let me contribute a little,
Yes its possible by OdiUpdateAgentSchedule utility.
1. Create a package, lets say Update Scheduling.
2. Drag and drop the utility, OdiUpdateAgentSchedule and select your Scheduler agent from the drop down.
3. Generate a scenario out of the package.
4. So whenever you create/update scheduling, run this Update Scheduling scenario from the operator to get the scheduling information get updated in the agent.
http://img185.imageshack.us/img185/4308/screenshot037x.jpg
Makes sense?
P.S: if you wanna make it automated, you can schedule that scenario for a particular time interval to get "auto" update of scheduling information.
Thanks,
G

Scheduling scenarios for every half hour in ODI 11g

Hi,
I am using ODI 11g.
My requirement is to execute a scenario after every half hour.
I can just see that scenarios can be scheduled on hourly basis only.
Please guide me how can i schedule scenarios on half hourly basis also.
Thanks,
Divya

Hi Divya,
Open your scheduling and go to Execution Cycle tab and Under Repetition select "Many Times", then set "Interval Between Repetitions " as 30 minutes or so.
Thanks,
Guru

AP:selected payment schedules report "Credit reduces payment amount below

Hi all:
I have a PPR reject one Debit memo with reason "Credit reduces payment amount below zero" at first and shows out in report "selected payment schedules report" as Unselected Scheduled Payments.
PPR Pay through date: 28-Nov-2011
Issued Debit Memo date: 28-Oct-2011.
But when change the Pay through date of PPR to 28-Nov-2012.
Then this issued Debit Memo can be selected and processed.
Any idea about this issue?
Your reply will be very appreciated.
Thank you
Beryl
Edited by: user10937857 on Dec 13, 2011 1:40 AM
Edited by: user10937857 on Dec 13, 2011 7:01 PM

Hi:
Thank you for your kindly reply.
I have already checked these 3 notes. for the setup one, customer has checked ,the setup is correct.
For the other patch solution notes.
If this issue is a bug issue, then why when they extend the PPR Pay through date to next year, then this Credit memo can be selected and processed?
Confusing.
Any idea about this?
Thank you very much

Errors when scheduling scenarios for agents using load balancing

Hi,
I have set up my ODI environment and have successfully manged to:
* run scenarios manually in development repository
* schedule scenarios and run on execution repository with one agent.
However when I try to set up a second agent to load balance the scenarios I get the following error below.
It seems to be a load balancing problem because I can run the scenario's successfully in every other case.
I am running an oracle RAC database. (2 servers, one oracle instance on each). I have set up one ODI agent on each server and I am trying to load balance between these 2 agents.
In topology I have set up 1 logical agent. Physical agent 1 is linked to itself and also to Physical Agent 2 under the load balancing tab.
For my scenario's I have 2 master scenarios (which are the ones scheduled) that call a number of other scenarios in the correct order.
Could anyone assist me please?
Thanks,
Matthew
Error:
====
java.lang.NullPointerException
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.E(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.a(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpScen.localExecuteSync(Unknown Source)
     at com.sunopsis.dwg.tools.StartScen.actionExecute(Unknown Source)
     at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(Unknown Source)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(Unknown Source)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(Unknown Source)
     at com.sunopsis.dwg.cmd.e.i(Unknown Source)
     at com.sunopsis.dwg.cmd.g.y(Unknown Source)
     at com.sunopsis.dwg.cmd.e.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Hi,
I'm wondering whether there may be a design flaw in the way our scenario's have been created / are executed.
Currently we have x number of scenarios executed by a x master scenario.
There are also y number of scenarios executed by a y master scenario.
These master scenarios are the ones scheduled against the agent and they call the "sub-scenarios".
We experience the above error when one of the "sub-scenarios" of a master scenario is executed on a different agent to where the master scenario is executed.
Any help greatly appreciated.
Thanks,
Matt

Scheduling scenarios don't work after upgrading 10.1.3.5 to 11.1.1.6...

Hello~
I upgraded ODI version 10.1.3.5 to 11.1.1.6 without any error.
However although I restart agent, scheduling scenarios don't work on time.
So I regenerated one of scenario using ODI studio menu and then this scenario worked successfully on scheduled time.
After upgrading, do I have to regenrate whole scenarios?
Isn't there any other workaround?
Edited by: user612431 on 2012. 5. 15 오후 10:42
Edited by: user612431 on 2012. 5. 16 오전 2:29

Hi, I have copied the jar file in users/appdata/.../userlib also. But let me go through this document and see what it says. I will get back to you. Thank you very much.
But tell me if I understood this correclty:
Inorder to upgrade from 10.1.3.5 to 11.1.1.6, I have executed the following steps so far:
1) I ran the RCC on my old repositories to check if they are consistent to migrate and it was successful.
2) Copied the E*,M*,W* xml files that RCC created into the oracledi.common\...\sqlserver\patch\ and oracledi.sdk\...\sqlserver\patch folders.
3) Cloned the existing master and work reps of 10g.
4) Installed the ODI 11g, but did not create the master rep and Work rep in 11g hoping that I would upgrade the existing cloned 10g repositories.
Now my understanding after going through some documents online is that UA uses the cloned repository details (master and from there it gets the work rep details) and 10g supervisor details that we provide and connects to cloned master and work reps and upgrades them. I do not know what this jdbc error is? Because I tried and could also create a brand new master repository in the 11g using ODI studio, now if 11g could not connect to DB using the jdbc how could it have created the repository. If 11g connects to DB I am assuming that UA should also be able to connect right?
Please correct me if my assumptions are wrong.
Thanks
V

Clarification on Daily selection work schedule rule variant

Hi ,
Just want to get an experts opinion on my
Daily selection work schedule rule variant
My condition is to have a variant for reduced work hours on day before a
public holiday (i.e only if public holiday is between monday to friday) not if public holiday falls on saturday or sunday
Ex: I don't reduced work hours on friday because saturaday is off .
Rule   No      Holiday Class     HolClNextDay          Day     Varaint
01     01       X.........      .x........                            xxxx...     A
I believe it would all posible situations even if i have 2 consecutive holidays on a week i.e say tuesday and wednesday or for another combination.
Let me know whether i'm right in my approach
Thanks in advance
David

Hi David,
You Just take as below:
    Rule    No Holiday cla    HolClNextD     Day        Variant
10    |          02    |     X.........      |        .X........          |        XXXXX..   |    C
Regards,
Radhey

Scheduled scenarios not working

Hi everyone,
I have created and configured ODI agent as Java EE Application successfully as mentioned below:
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/setup_jee_agent/setup_jee_agent.htm
The test is successful.
Now I am trying to schedule a scenario using this agent as below :
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/Creat_Schedul_Scen/Creating_Scheduling_Scenario.htm
But seems like the scheduler never runs..and there are no execution logs as well.
When I try to run the same scenario using the same agent, it runs fine.
Am I missing something here?

Yes.. I have already done - Update Schedule on that agent.. The scheduled is updated successfully.
Additionally, I have more then 1 agent up and running...Will that cause any problems?
Do I need to do something in the Load balancing tab of the agent?
Edited by: 937825 on Jun 1, 2012 1:34 PM

Parameterized Data Selection in Scheduler Infopackage in BW

hei...is there any way that i can parameterized the data selection in the scheduler infopackage? When i wanna load the data from the scheduler, the data selection will change based on the source systems. Let say today got data in the source system, then the scheduler can auto select today's date to load the data, if let say next monday 25th of feb got data, then the scheduler will auto select the date 25th of feb and load the data from the source system to BW.
thanks...

Hi,
Not sure I understood this fully.
For each source system there would be 1 infoapckage as it is created on the datasource.
Now for your requirement you can write a routine inside the infoapckage to load the data for the current data.
Bye
Dinesh

Agent Scheduler - Schedule Scenario programatically

Hello
Im working with scenario scheduling using a scheduler Agent in Oracle Data Integrator 10g. I know the schedule can be set from the Designer or the operator tools but for some of the defined scenarios i need the user to set the execution schedule using a web application (Java Web application). I can´t let the users connect to the Work Repository to set the schedule for a scenario.
Is there a way to set the schedule for a scenario programatically using the ODI Java API or a Web service? I want to create new schedules for a scenario or change a schedule without of the Operator or Designer tools, and preferably without messing directly with the Master Repository
An alternative could be managing the schedule in the web application using Quartz or Cron and then invoke the scenario with the OdiInvoke public web services, but i prefer to use the scheduler agent.
Thanks in advance

There a lot of ways. It just depend on how you can customize it. Create a batch file to trigger the scenario.
Now a create small java program to run batch file and make a looping for infinite times and just after the trigger of scenario supply the sleep time for required interval.

Selection position in scenario

Dear All,
We are creating one program for mass action upload, When we choose position in the scenario, so will it take automatic Personnel area selection or not?
Is Account Assignment will come into picture for that position or not?
Regards,
Kumar

Ram,
I am mainly concerned about the Position's Emp group and sub group(Those are the part of account assignment of a particular position),
So my question is during Rehire action for mass employees, when we go to Position system automatically ask for Egp and Esubgp.
So i think during position objects mass upload we have to upload employee group and employee subgroup also...
Regards,
Kumar

Scheduling Scenarios - Multiple instances of scenario

Hi
I am using the scheduler to schedule a scenario that has a large number of cdc packages. The scenario usually takes 7/8 mins to complete.
I have set the schedule to execute the scenario hourly at 30 mins past the hour.
The execution cycle is set to many times (10) with 30 seconds interval between repititions.
However sometimes the scenario can take longer to complete, so the execution cycle will not have completed when the next cyclye begins (i.e. + 1 hour).
The upshot of this is that I end up with 2 or more instances of the same scenario running at the same time. This causes conflicts because C$ and I$ tables are being deleted, populated etc from different instances.
I would ideally like to set up the scenarios so that they will not start while another instance is running.
I've tried doing this with variables, but variables in one instance are not available in other instance (have tried everything here).
I also heard there was a way of running scenarios synchronously, but this only appears to be available if you run using startscen.sh - I would prefer to use scheduler.
I'm aware there is a way of adding session number to C$ and I$ filenames, but surely there is an easier way if ODI is any good at all???
Can anybody help me.
Thanks in advance.

Hi ,
In ODI , there is a tool name "OdiStartScene" which usually use for running the scenario in the package. eg. if you have package A and want to wait for Package A to succeed then running package B , You can use this tool with "Synchronous Mode".
And about the variable that you talking. Did you use variable in "Global" mode?
Thanks

Order Receive to Production Plan, Scheduling Scenario

Hello ,
We are making process chart which will include total manufacturing unit function. It consist of Sales, Project Management, Engineering, Bill Of Material Preparation, Production Planning, Scheduling and Manufacturing/Production.
What should be very standard total scenario specially from Bill of Material for any particular received PO then Production plan, forecasting, scheduling etc. for the same.
Please share scenario which you have or which used most commonly all over manufacturing industries.

Rahul,
If your scenario is integrated with project system you can refer using planning strategy 21 Engineer To Order.
If you want to have simple make to stock scenario then you can explore 10,11,40 etc for different reasons.
You scenario is customer oriented then you can use planning strategies 20,50 etc
All above planning strategies have their own process steps.
If you can tell us exact scenario in which you are working so that someone could help you with process steps.
Br
KK

Immediate help required with this job scheduling scenario

I have a job that needs to run a procedure hourly but not between 6:00 AM to 8:00 AM and 6:00 PM to 8:00 PM.
Can anyone help me with how to schedule this job.

If you use a window the job would only execute if the window opens. If for some reason the window did not open then the job would not execute.
Windows should be used to specify which resource plan should be active for the time interval.
In this case you are better off using FREQ=DAILY; BYHOUR=; and specify the hours.

Problem in giving data selection while scheduling init

Hi All,
We did repair full data upload from 1 DSO to 4 cubes based on different conditions.
For example:
We have loaded the data in one of the cube ZPCAC_C01 with selection condiition 0ORIG_PCA = 02.
Now we want to run the delta with the same seletion condition; we run the repair full for the particular cube.
For example:
We want to run the delta for the cube ZPCAC_C01 for the selction condition 0ORIG_PCA = 02.
We are trying to run the init with the selection condition but when we choose init with/without data transfer; ALL THE SELECTION CONDITION GET DISABLED.
It is necessary to run the init with condition; if we want to run the delta with the same condition.
Unfortunatly, it is disabling the the data selection tab when we choose init.
Note: We have already deleted the init that has been done before.
Please let us know the way how can we run the selective delta in this case.
-Ravi

Hi Ravi,
First this is not correct forum for your question, please post your question in correct forum to get more and correct answers.
Ok, you are loading data from DSO to 4 cubes. You did full upload from DSO to Cube right? so what ever data in DSO will upload directly into cube by DTP running (if you do this in BI 7).
Is your cube has datasource to extract data or only getting data from DSO?
If it is getting data only from DSO, then you have run Init and delta on DSO and then update data into cube.
If your cube has datasource directly then run run Init withdata transfer and then run delta with selection condition.
Thanks.

Selection of scheduling scenarios

Similar Messages

Maybe you are looking for