Selection of transport service provider in SAP APO

Hi
For each transportation lane there will be 4 transport service providers in SAP APO SNP,customer want high transportation cost service provider to be selected for planning.kindly advise on this

Hi Prakash,
I allready have read the how-to guide. And this works apart.
But this does not work together with the possibility to select several
values in several dropdown boxes as I tried to explain. I, for one,
do not see how to integrate this solution.
Regards,
Joerg

Similar Messages

Transportation Service Provider

Hi,
What is transportation service provider and how it is related with the transportation lanes?
Thanks,
Siva.

Hi,
In Transportation Lanes we maintain Means of Transports.
For these Means of Transports we can assign external Transportation Service Providers (TSP).
Precondition of this is to have TSP maintained in a location master.
Please find detailed help as below:
http://help.sap.com/saphelp_scm70/helpdata/en/36/8a3a40a63bc65de10000000a155106/frameset.htm
Regards
Datta

PBR to select a specific service provider

I want to use PBR with route map to match some traffic coming from different vlans to go to a specific service provider I have vlan 10 and vlan 20 , both vlan default gateway are on the core switch I am thinking of configuring a route map to match source vlan 10 and set ip next hop to be the inside interface for the router to provider A Then i need to configure a PBR under interface but i am confused about which interface i have to apply the route map , is it the vlan interface on the core switch ? Also i need to know who can i test it

Hi ,
What is your core switch hardware ?? , need to verify do it support PBR . Share me your switch config and next hop ip address of your both service provider .
HTH
Sandy

Help in selecting SAP service provider

After [reading the evaluation criteria|http://www.infoverto.com/2010/03/evaluate-your-erp-service-provider.html], I am wondering if somebody in this forum can help me in identifying a service provider for SAP implementation which is for a spanish customer that needs MM, FICO and SD modules majorly with no customizations. Name 3 SAP service providers that are strong in spain.

answered

Security Questions from a Select List or Drop down Service Provider Edition

Hello,
Can we fetch security questions from the drop down or a select list in Service Provider Edition. We have a requirement to select multiple security questions during registration.
Please advise.
Regards
Vinod

HI
Welcome to the Forum...
You cannot put all the values in a single parameter field so you need to select each field for each parameter...
Better you post it in this link for more reponses:
Reporting and Printing

CA Cryptographic service provider?

Hello,
I am planning to install Single tier Enterprise CA on a dedicated Windows 2008 R2 Server.
We still have Windows XP SP3 workstations and I have some questions about the "cryptography" options on the Certificate Authority installation wizard.
The "Select a cryptographic service provider (CSP)" -selection defaults to "rsa#microsoft software key storage provider". I'am not sure can I select it, or any of the "Cryptography Next Generation (CNG)"
providers (marked with #).
Does anyone have any information about which CSP I should select?
I believe Windows 2003 CA Defaults to "Microsoft Strong Cryptographic Provider" so thinking of selecting that to guarantee compatibility with Windows XP.
Any recommendations on "Key character lenght" and "Hash algorithm for signing certificates" are also very welcome.
Thanks
lakend

You should use the strongest provider (which provides additional features) that is supported by the operating system that runs CA service. In your case it is Microsoft Key Storage Provider. Do not use any legacy provider (strong or enhanced CSP). With Microsoft
KSP you have several options: xxx#Microsoft Key Storage Provider, where xxx -- is public key algorithm supported by the provider. Here you must select the algorithm that is supported by all certificates clients. Currently RSA is Internet PKI standard algorithm
which is supported by almost all certificate clients.
In other words, the most "safe" configuration is RSA#Microsoft Key Storage Provider, signature algorithm = "SHA1" and key length 2048. The following variations are possible without affecting many clients: change key length to 4096 (I don't see a big deal
here) and change to SHA256 signature algorithm. However, legacy clients (Windows XP and Windows Server 2003) may not work with this algorithm (they require updates to support SHA2 algorithms).
My weblog: http://en-us.sysadmins.lv
PowerShell PKI Module: http://pspki.codeplex.com
Check out new:
PowerShell FCIV tool.
Thanks Vadims for the solution and others for confirming.
Installing ca with:
CSP: Microsoft software key storage provider
Key length:2048
Hash algorithm for signing certificate: SHA1
CNG public key algorithm: RSA
Thanks
lakend

How to install and configure "SAP MAPI Service Provider" in 470(basis 620)?

Hi everyone,
Requse:
Send E-mail from SAP and Recive E-mail from MS outlook2003.
My question:
How to install and configure "SAP MAPI Service Provider" in 470(basis 620)?
For example:
Which setting need to do in R/3 server?
Which parameters need to select when install 620gui?
Which setting need to mark in MS outlook2003?
Thanks and Regards,
Colin.

Hi Colin,
For SAP MAPI read,
http://help.sap.com/saphelp_46c/helpdata/en/04/81dd4ebf2811d2897f0000e8216438/frameset.htm
For Sending mail from SAP,
http://help.sap.com/saphelp_46c/helpdata/en/55/a8b538891b11d2a25a00a0c943858e/frameset.htm
For Receiving mails read,
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/frameset.htm
<b>Which parameters need to select when install 620gui?</b>
Don't get this question...
<b>Which setting need to mark in MS outlook2003?</b>
None
Regards
Juan
Please reward with points if helpful

SAP APO Transportation Managment 5.0

Hi,
          I would like to know the the process to Implement Transportation and Planning 5.0 in SAP APO environment ,presently the client is using SD for transportation and distribution.
          If you could mail me implementation guide in regards to Transportation Managment it would help me a lot.
            Could u send me some links which will help me.I have refer to master Data sep-up and understood the process in help.sap.com.
Thanks
Partha

Dear Partha,
Pl. find the below link
http://help.sap.com/bp_scmv140/BBLibrary/documentation/S12_BB_ConfigGuideEN_DE.doc
This guide will show you basic configuration settings to be made in both the systems. Though it does not list all the configuration, but it is quite useful guide to begin with.
Regards
Sandeep Patil

What are the functionalities provided by SAP ECC 6.0 (Logistics Execution) for inward and outward transportation?

The Transportation Module provides a very detailed functionality to capture & control the transportation both inward and outward. However there is a set of transaction codes in SAP ECC 6.0 which may provide some functionality on transportation.
Can Logistics Execution provide some basic control in the absence of Transportation Module? Also what are the advantages Transportation Management module provides over Logistics Execution in SAP ECC 6.0?

Hello Prasad,
For ESS and MSS you do not require special data from the backend side, If a person has master data maintained in PA30, He can see his personal details in ESS, For that employee should maintain the Portal user id in Infotype 0105 , subtyp0001.
With that userid he can able to enter the portal and maintain his details. Same is the case for MSS , Manager should have maintained 0105 subtype 0001. and he can see the details of his employees in MSS application.
For ESS you need to have Portal
SAP_ESS
PCUI_GP
BP for ESS
You can check the following link :
http://wiki.sdn.sap.com/wiki/display/ERPHCM/HOWTOGETRIDOFSPSTACKMISMATCHISSUES
about the compatibility of Support Packages..
All the above mentioned package should be deployed on Eneterprise Portal.
You can search on various blogs also about this information.
Best Regards,
Deepak..

Configure SAP ABAP as service provider using SAML holder-of-key

Hi
We are trying to configure "SAML Holder of key" between Microsoft (as
a service consumer) and SAP ABAP (as service provider).
The service provider/SAP ABAP is release 7.11 and we need to configure this component.
We have found SAP note 1254821 and are trying to follow the instructions for
the "SAML Holder of key" scenario:
However there is one step that we do not understand: step 5 "The private key to decrypt the
encrypted....at the provider system must be a WS Security Identity in transaction TRUST"
Anyone who can elaborate of the meaning of this step and describe a procedure for what
exactly to do?
BR
Tom Bo

Hi,
a service provider needs to check two things when processing message. The first thing is that SAML assertion was issued by STS by checking signature of SAML assertion. The SAML assertion is signed by STS (step 4 in OSS note). The second thing is to verify that sender knows key from SubjectConfirmation element (that's why it is called holder of key). One way is to encrypt and sign SOAP message using symmetric key. There is also option to use asymmetric key. The key is encrypted by STS using the public key of service provider. Therefore the private key must be imported in service provider system (step 5 from OSS note). More info can be found [here|http://help.sap.com/saphelp_nw73/helpdata/en/e5/9f9913fc9c418db98c8693b2bbdb7c/frameset.htm].
Cheers

RecordsManagement: Error in service provider for DOMEA: SAP-Office Mails

Hi all,
I am trying to use the default service provider for Domea:SAP office mails( RMPS_LINK_SP_MAIL).
but i am getting an error " Standard activity not defined " Message no. SRM_ORGANIZER106.
can anyone please help me in this regard...
Also the scenario i am working for is: some particular mails coming to my out look inbox needs to be attached to the record. how to achieve this scenario.... will the above service provider helps me. or is there any other way to achieve this. I am using SAP Records Management not PSRM.
Thanks & Regards
kavitha.

Hi all,
I am trying to use the default service provider for Domea:SAP office mails( RMPS_LINK_SP_MAIL).
but i am getting an error " Standard activity not defined " Message no. SRM_ORGANIZER106.
can anyone please help me in this regard...
Also the scenario i am working for is: some particular mails coming to my out look inbox needs to be attached to the record. how to achieve this scenario.... will the above service provider helps me. or is there any other way to achieve this. I am using SAP Records Management not PSRM.
Thanks & Regards
kavitha.

How to select service provider for software update

When i try to update of my nokia3110c mobile within it by using 'software update' option from phone menu, it shows 'select service provider'. Please tell me how to select this service provider.
Thank you.

Hi veesh,
Thanks for your post and welcome to the Nokia forum.
Did you try to update your phone via Nokia suite?
Let us know how you get on and feel free to post any other questions you may have.
Regards,
Pfrancoise
If this post has helped you to solve this issue, please press the "accept as solution" icon. Kudos would always be appreciated.

Crystal Reports transport files for SAP APO / SCM

Hi there,
Problem: we want to use Crystal Reports on top of SAP APO / SCM and have some difficulties getting the definitions of BW / OLAP servers right and don't know which transports to import on the SAP to report with Crystal.
System is a SAP SCM system with APO module. There is a cube in this module (because there is some internal BW system) and I can see the cube in Crystal Reports. When I want to report from this cube I get an error:
"/CRYSTAL/MDX_GET_STREAM_INFO" not found.
This means some transport files were not imported and some functions are missing.
The following transports are missing:
====quote from transports_EN.txt included in transports for Crystal Reports=====
The following files must be used on an SAP BW system:
(These files are Unicode enabled.)
Content Administration transport (K900579.r21 and R900579.r21)
Personalization transport (K900580.r21 and R900580.r21)
MDX Query Connectivity transport (K900581.r21 and R900581.r21)
ODS Connectivity transport (K900582.r21 and R900582.r21)
===========================================================
My SAP BASIS expert refuses to import these transports in SAP SCM, because he thinks it is not an SAP BW system as listed in the above transports_EN.txt file. Just trying is not an option because transports cannot be removed once imported...
In my opinion these transports have to be imported to clearly access the cube and will work on SAP SCM even if it's not a 'dedicated' SAP BW environment. In other words, these transports should be imported and will work on SAP OLAP servers like SAP BW, SAP SCM, SAP SRM (APO) or SAP SEM.
Does anyone of you have some more experience on reporting from SAP SCM / APO cubes and if I can import these transports without getting some nasty errors, because its not an SAP BW system?
Kind regards!
Edited by: J. van de Mheen on Mar 3, 2009 4:21 PM

Thanks for your reply, but this is not helping me much.
Let me explain more.
In the transport_EN.txt file we see this:
If your SAP system is running on a 6.20 *BASIS system* or later, you must use the files listed below:
(These files are Unicode enabled.)
* Open SQL Connectivity transport (K900574.r21 and R900574.r21)
* Info Set Connectivity transport (K900575.r21 and R900575.r21)
* Row-level Security Definition transport (K900576.r21 and R900576.r21)
* Cluster Definition transport (K900585.r21 and R900585.r21)
* Authentication Helpers transport (K900578.r21 and R900578.r21)
The following files must be used on an *SAP BW system*:
(These files are Unicode enabled.)
* Content Administration transport (K900579.r21 and R900579.r21)
* Personalization transport (K900580.r21 and R900580.r21)
* MDX Query Connectivity transport (K900581.r21 and R900581.r21)
* ODS Connectivity transport (K900582.r21 and R900582.r21)
So I have to import 5 transports in SAP BASIS system and 4 transports in SAP BW system to make full use of the integration kit.
SAP SCM / APO is basically a BASIS system, so the BASIS expert says only those 5 transport have to be installed.
But SAP SCM / APO is also having some reporting capabilities and stores data in OLAP cubes (Infocubes).
In Crystal I can see these cubes when using SAP BW MDX connection.
To make the error go away, I must have some function modules used in transport 'MDX Query Connectivity transport. But the BASIS expert doesn't want to import this transport, because it is listed as a transport for a SAP BW system and he says SAP SCM / APO is NOT a SAP BW system (it's a BASIS system).
And now I have to get some proof that this transport has to be imported in the SAP SCM / APO BASIS system before he installs it...

SAP BODS and SAP APO

Hi
Can some one guide me on How to extract SAP APO Data in to BODS?
regards
Raj

Hi Rajeev Parimi,
Create a RFC connection in SAP Data Services Management Console for your SAP APO.
Provide required details.
Log into your SAP APO
Provide T-Code SM59
Create a RFC connection. Provide Registered Server Program name(RFC ProgramID Created In DS Management Console).
Save the connection and then test the connection.
Now log into Data Service Designer
Go to Local Object Library and select Datastores Tab.
Right Click and Select New
Then select Data Transfer Method as RFC and provide your RFC Name.
Provide all the required fields.
select OK
Note: RFC Data Transfer Method is available from SAP BODS 4.1 Version
Regards,
Akhileshkiran.

Distribution Planning within SAP - APO 3.0 or SCM 4.0

Hi,
Can do any 'Distribution Planning' within SAP SCM V4.0 or V5.0.
We are trying to improve 'decision-making' associated with selection of a particular warehouse for shipments coming out of a specific plant. The application should be able to produce a recommended set of shipments by week from each plant. Critical inputs that go into the process will be (a) Procurement Forecast; (b) Production Forecast; (c) Warehouse Space; (d) Production Plan etc
Can this be done utilizing SAP APO 3.0, SCM 4.0 or SCM 5.0?
Thanks

Hi Tushar,
APO 3.0, SCM 4.0 nd SCM 5.0 all provide replenishment, distribution and deployement along with basic transportation planning functionalities wihin SNP (Suppluy Network Module) of APO. With SCM 5.0 you get other applications (along with APO) like EWM (Extended Warehouse Management) and better transportation planning features.
Moreover it makes sense to go in for the lastest version of the solution to get the latest set of features. Please check on help.sap.com under my SAP Business Suite >> SCM >> APO >> SNP or http://www.sap.com/solutions/business-suite/scm/featuresfunctions/index.epx for more details.
Thanks,
Somnath

Selection of transport service provider in SAP APO

Similar Messages

Maybe you are looking for