Selection option for variable entry in BEx in 2004s

Hi All,
Have any of you noticed that the selection option functionality for variable entry while creating a variable does not allow wild card entry,Even though you create the variable with selection option as input.
In 3.5 we had option the option "contains the pattern " but in 2004s its not available in the variable entry screen.

Hello Guys,
When I posted this thread we were upgrading to SP11, now I am in the middle of another upgrade (SP15) and I still notice that wild card option is yet to be made available for a variable of type selection option.
Back then I had sent a message to SAP and was told that the functionality would be rolled out in new SP's. I am very curious as too how others are handling this problem, as they are bound to be reports for which such variables are a must.
P.S - The option has been made available
Edited by: Karthik on Jul 22, 2008 6:52 PM

Similar Messages

SELECT-OPTIONS for variables that cannot have a range

Hi all,
There is an option to show only one input-field for a select-options declaration by using the 'no intervals' option. But it is still possible for the user to specify ranges when doing multiple selections (i.e. specify intervals for the variable).
However, if I have a variable that implicitly does not have ranges, (e.g. 'Arjun' TO 'Shankar' makes no sense at all), I want to let the user do multiple selections for it, without allowing him/her to enter ranges for it.
Can I do this in a selection screen in any way (even if it involves not using select-options)? And if yes, how?

Use this:
SELECT-OPTIONS xxxx FOR yyyy NO INTERVALS
NO-EXTENSION.

Select options for multiple entries

hi,
in selection screen i have 2 select-options as below
SELECT-OPTIONS: s_belnr FOR bkpf-belnr ,
                              s_bukrs FOR bkpf-bukrs.
the problem is if BELNR or BUKRS are not given the error message should be displayed as enter the required fields.
if i keep the OBLIGATORY i will get the message but if i keep OBLIGATORY first they need to enter one belnr or bukrs in selection screen then it allows for multiple option but the bussiness want to directly goto multiple option and upload data.
please help

Note Replace P with % Sign in IF Condition it not allow me to Put % there
TABLES: bkpf.
SELECT-OPTIONS: s_belnr FOR bkpf-belnr,
                s_bukrs FOR bkpf-bukrs.
AT SELECTION-SCREEN.
IF s_belnr[] IS INITIAL AND s_bukrs[] IS INITIAL AND sy-ucomm NE 'P000' AND sy-ucomm NE 'P001'.
    IF s_belnr[] IS INITIAL OR s_bukrs IS INITIAL.
      MESSAGE: 'Please Enter Value in Bothe Fields' TYPE 'E'.
    ENDIF.
ENDIF.

Query - select values for variables form list / Bex 7

Hello together,
when I open a query in the 'Business Explorer Analyzer 7' and I want to select the values for my variables from list, BW shows always the values from history.
Is it possible to change this? I want to see always the single values.
Thanks and best regards.
Jörg

Hello Jörg
The variable values in history are shown in drill down button of variable input box, whereas a button beside it will show a list of values when clicked. These are F4 value help selections.
How is variable created? Please create variable with basic settings as
'single value'.
Regards,
Asit Ramteke

Limit selection list for variables

Hello Experts.
Is there a way to limit the selection list for variables? For example, there are many possible currency values for 0CURRENCY, but I want allow the user to choose only one of these choices USD, EUR, or HKD. I would rather not do a validation check subsequent to the users making their selection.
I must use 0CURRENCY rather than copying it to another characteristic and entering only those three keys in master data.
Any ideas?
Kind regards,
Aron
Edited by: Aron Weaver on Oct 1, 2010 1:08 AM

If you are using the standard info object which is referring to '0CURRENCY' then it mayn't be possible to restrict the 'F4' list to few currencies in the standard BEx environment. There are couple of options to limit the 'F4' selections using the web template /BSP technology.

Select-options for time stamp

Any ideas on which data element to be used for select-options for timestamp on the screen so that a user is able to f4 help too.
i am using data element 'tzntstmps' but i am not getting f4 help for it.

Hello Trivenn
I do not think it makes sense to search for any other timestamp data element which might be part of a search help.
TZNTSTMPS = UTC Time Stamp in Short Form (YYYYMMDDhhmmss)
How could such a search help look like? A calendar control combined with some kind of "time control"?
You may facilitate the entry of time stamps in such a way that if the user enters only a date in the LOW field (e.g. 20080422 without time) you change it AT SELECTION-SCREEN (PBO of your selection screen to 20080422000000).
Correspondingly, you change a date value (e.g. 20080422) at the HIGH field into 20080422235959).
If, however, the user enters already a complete timestamp you do not change anything.
Regards
Uwe

Requirement to maintain select-options for multiple fileds in webdynpro aba

Hello Gurus,
We have a requirement to maintain select-options for multiple fileds in webdynpro abap.
now we are able to create select-options for a single field using wdr_select_options componet usage.
how can we achive this select-options feature for multiple fields.
Could anyone please suggest solutions?
and if possible send me the sample code for this requirement.
Thanks in Advance for your replies.
Regards,
Shyam

Hi,
Nothing different for more fields, same. some declaration changes.
For example code i am using.. in WDDOINIT method.
TYPES:
    fiscal_year TYPE RANGE OF GJAHR,
    S_KUNNR TYPE RANGE OF J_3RS_KUNNR,
    S_VKORG TYPE RANGE OF VKORG_RAN,
    status type PVWTY-RETPA,
    ty_r_date TYPE RANGE OF s_date,
    ty_s_date TYPE LINE OF ty_r_date.
DATA lo_interfacecontroller TYPE REF TO iwci_wdr_select_options .
DATA lo_cmp_usage TYPE REF TO if_wd_component_usage.
lo_cmp_usage =   wd_this->wd_cpuse_cmp_sel_opt( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
lo_cmp_usage->create_component( ).
ENDIF.
* Reference variable used instantiate the select-options component
DATA
    lr_cmp_usage TYPE REF TO if_wd_component_usage.
* Variables used to create the select-options fields and
* define its initial values
DATA:
    lr_field TYPE REF TO data,
    ls_date TYPE ty_s_date.
FIELD-SYMBOLS:
    <fs_field> TYPE ANY,
    <fs_range> TYPE INDEX TABLE.
* Instantiate the select-options component
lr_cmp_usage = wd_this->wd_cpuse_cmp_sel_opt( ).
IF lr_cmp_usage->has_active_component( ) IS INITIAL.
    lr_cmp_usage->create_component( ).
ENDIF.
lo_interfacecontroller =   wd_this->wd_cpifc_cmp_sel_opt( ).
wd_this->m_sel_opt = lo_interfacecontroller->init_selection_screen( ).
data : vhelp type wdy_md_value_help_mode_enum .
* Sets the helper reference
wd_this->m_sel_opt1 = wd_this->wd_cpifc_cmp_sel_opt( ).
wd_this->m_helper = wd_this->m_sel_opt1->init_selection_screen( ).
* Hide the standard select-options components.
wd_this->m_helper->set_global_options(
    i_display_btn_cancel = abap_false
    i_display_btn_check = abap_false
    i_display_btn_reset = abap_false
    i_display_btn_execute = abap_false
lr_field = wd_this->m_helper->create_range_table( `KUNNR` ).
wd_this->m_helper->add_selection_field(
    i_id           = `KUNNR`
    I_DESCRIPTION = 'Customer Code'
*    i_within_block = `BL01`
    it_result      = lr_field ).
FREE lr_field.
lr_field = wd_this->m_helper->create_range_table( `VKORG` ).
wd_this->m_helper->add_selection_field(
    i_id           = `VKORG`
    I_DESCRIPTION = 'Sales Organization'
*    i_within_block = `BL01`
    it_result      = lr_field ).
FREE lr_field.
Go through this..
http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproABAP-Complexselect-optionscomponent+usages
Cheers,
Kris.

Selection options for field display text instead of key

Hi All,
In the selection screen in my reports, when the user clicks on the selection options for one the fields to display the possible values they can use. Instead of the key the pop up box only displays the text for that field. This is an issue because one of the fields is equipment number and the user needs to be able to see the key not the descriptions. This is occurring in multiple reports and for multiple fields. I haven't been able to find anything in the infoobject properties or the query properties to change this.
Please help!
Edited by: Anthony Loh on Sep 29, 2010 10:57 PM

Hi Anthony,
Cud u pls check in backend how it is created ...
RSA1>Mdeling>IO Properties>Second tab BEx properties>Display-->it shud be Key and not text...
Check this and come back ..
Rgds
SVU123

Select option for selection valid and invalid data.

Hi All,
Any one pleas help in validating following case :-
In the selection screen there is a select option for equipment number like EQUI-EQUNR
if any user will give wrong equipment no. It will generate an error message from the range of equipment no.
and put it to an internal table it error.
and if any value in between the select option(equipment no) is correct then that value I need to proceed for some other logic.
Iu2019d appreciate if some one help me in generation code for the above case or logic.
Thanks

Hi,
Use FM 'RS_REFRESH_FROM_SELECTOPTIONS'
DATA: RSPAR TYPE STANDARD TABLE OF RSPARAMS.
      REFRESH RSPAR.
      CALL FUNCTION 'RS_REFRESH_FROM_SELECTOPTIONS'
          EXPORTING
            CURR_REPORT           = 'prog name'
    IMPORTING
      SP                    =
          TABLES
            SELECTION_TABLE       = RSPAR
         EXCEPTIONS
           NOT_FOUND             = 1
           NO_REPORT             = 2
           OTHERS                = 3.
      IF SY-SUBRC <> 0.
   MESSAGE I000.
      ENDIF.
In table parameter you ll get the all entries entered .
Check out the values with respective tables.If value is not correct tk it into internal table
else proceed ahead. You can Remove incorrect entries this way.
regards,
ajit.

MSS Time Approval - multiple (different) selection options for manager?

Hi all
I am setting up MSS Time Approval delegation in ERP2005 without workflow, leave request, nor portal development environment set up.
In this case, the customer needs to have multiple selection options for who to approve:
1. The manager's direct reports (standard functionality)
2. All subordinates, all levels down
3. Delegate's (manager or non-manager) view of a particular (other) manager's direct reports
3b. This might extend to a set of different delegation selections
4. Add or remove certain individuals
Now, getting 3. and 4. to work was simple using the BAdI (I think the enhancement spot is named APPR_CUST), method ...-edit_selection, but I am having difficulties with 2. and 3b. Now I am thinking along these lines, and I would greatly appreciate your input:
A. It seems that the MSS "Approve working time" app only loads the data selection at the entry into this screen (INIT command from portal), using the start perspective determined for example by the IMG for defining the approval profile <-> view. My debugging suggests that the view change from the drop down menu (CHANGE_PERSPECTIVE command) only picks a different way to present the same data set.
Could anybody please confirm or contradict this conclusion?
B. Is it possible to present the entire "Approve working time" section in MSS in multiple different copies so that they would all generate an INIT command? Or is it possible to copy and modify the entire MSS tab, resulting in an ESS tab, one MSS, one "D"SS, one "A"SS (well, not suggesting that the top manager is one, but you get the drift...) and so on?
If either of this were possible, it would be simple to make two modifications, one at the beginning of the FM called by the portal and one at the FM that returns the start perspective.
So far I have been trying to catch and alter the CHANGE_PERSPECTIVE command into an INIT in the back end, but the Time Approval functionality is a bit too complex for me to feel entirely comfortable with this approach.
Your input is much appreciated!
Kind regards
Niclas Arndt

We too are using MSS for time approval of time entered via ESS. We are on ECC 6.0 for the backend (no enhancement packs, at least not yet), currently sp stack 10 with hrsp 24, and EP 7.0 with stack 10 for the ESS/MSS business packages. We are using the standard MSS UWL functionality for the approval, so it is workflow-based in my understanding.
In other parts of MSS, the managers can see a few levels deep in the organization structure, based upon the definition we gave for their structural profiles. For instance, in the team calendar/overview, or other team information, they have a choice for multiple levels or only direct reports. However, in the time approval application, only direct reports are shown, so if a manager goes on vacation, at present the only way to cover time approvals for that manager's employees appears to be to temporarily assign a new 'chief' to that org unit, so HR involvement becomes necessary. The manager doesn't have any method for delegating the approval or other MSS authorities. We were hoping that by allowing multiple levels in the structural profile, such approvals would "roll up" to the next level, i.e. the manager's supervisor, so the next level manager could act as a backup to his/her managers on vacation. That doesn't work, however.
We have heard that a delegation feature for MSS will be available in an upcoming release, but I haven't found any information regarding whether that requires an upgrade, an enhancement pack, a later service pack level, or what or when that functionality will be available. Does anyone know anything about that?
Regards,
Matt

Select-options for OO Methods

Hi all,
How can I define select-options for a method in a global class.
And how can I pass these select-options from a report.
Thanks & Regards
Eshwar

Hi all,
How can I define select-options for a method in a global class.
And how can I pass these select-options from a report.
Thanks & Regards
Eshwar

Multiple select options for an input field

Hi All,
We have a requirement where in we need to provide multiple select options for an input field in a BSP application and get output relevant to all the given inputs(do not require range).
Please do let me know how to solve this.
Thanks & Regards,
Lavanya .

Hi,
The requirement is : Suppose there is a input field PLANT.
If we give input for plant it gives related output.
Now if it is required to give 5 or 6 inputs..like plant1,plant2...plant6 and get the output related to all 6 inputs.
(Like we implement in ABAP)
Please do let me know how can this be implemented in BSP.
Thanks & Regards,
Lavanya.

Select-options for date field.

Hi all,
i need to give select options for Date field.How can i give that.
Thanks & Regards
Ravi.

Hi Ravi,
Use the Component WDR_SELECT_OPTIONS to include select options in Web Dynpro ABAP. Follow these steps:
1. In your Component , "Used Componet" tab add Component WDR_SELECT_OPTIONS . Component Use can be any name that you want to give, eg SELECT_OPTIONS
2. Go to the View where you want to include the Date Select Options. I am assuming that you already have an Attribute of Type DATS in your context.
3. View: Properties Tab:Create Controller Usage and select
SELECT_OPTIONS     WDR_SELECT_OPTIONS
SELECT_OPTIONS     WDR_SELECT_OPTIONS     INTERFACECONTROLLER
4. View Layout Tab:Include a View Container. In this view container we will show the Date Select Options.
5. View Attributes Tab: Create Following two attributes:
M_HANDLER type IF_WD_SELECT_OPTIONS
M_WD_SELECT_OPTIONS type IWCI_WDR_SELECT_OPTIONS
6: View Methods Tab: Create a method eg CREATE_SELECTION_SCREEN. Call this method in the WDDOINIT of the view.
7:CREATE_SELECTION_SCREEN: Write following Code:
* Data Declaration
data:
        lt_range_table TYPE REF TO DATA.
data:
        lr_componentcontroller TYPE REF TO IG_COMPONENTCONTROLLER,
        lr_componentusage TYPE REF TO IF_WD_COMPONENT_USAGE.
* Execution
* Create Used Component
lr_componentusage = wd_this->wd_cpuse_select_options( ).
if LR_COMPONENTUSAGE->HAS_ACTIVE_COMPONENT( ) is initial.
    lr_componentusage->create_component( ).
endif.
* Get pointer to interface controller of select options
wd_this->M_WD_SELECT_OPTIONS = wd_this->wd_cpifc_select_options( ).
* initialize selction screen
wd_this->M_HANDLER = wd_this->M_WD_SELECT_OPTIONS->init_selection_screen( ).
* Create Range Table for: Date
CALL METHOD WD_THIS->M_HANDLER->CREATE_RANGE_TABLE
    EXPORTING
      I_TYPENAME     = 'DATS'
    RECEIVING
      RT_RANGE_TABLE = lt_range_table.
* Add Selection Field for: Date
CALL METHOD WD_THIS->M_HANDLER->ADD_SELECTION_FIELD
    EXPORTING
      I_ID                         = '<name of date attribute in the context>'
*      I_WITHIN_BLOCK               = MC_ID_MAIN_BLOCK
*      I_DESCRIPTION                =
*      I_IS_AUTO_DESCRIPTION        = ABAP_TRUE
      IT_RESULT                    = lt_range_table
*      I_OBLIGATORY                 = ABAP_FALSE
*      I_COMPLEX_RESTRICTIONS       =
*      I_USE_COMPLEX_RESTRICTION    = ABAP_FALSE
*      I_NO_COMPLEX_RESTRICTIONS    = ABAP_FALSE
*      I_VALUE_HELP_TYPE            = IF_WD_VALUE_HELP_HANDLER=>CO_PREFIX_NONE
*      I_VALUE_HELP_ID              =
*      I_VALUE_HELP_MODE            =
*      I_VALUE_HELP_STRUCTURE       =
*      I_VALUE_HELP_STRUCTURE_FIELD =
*      I_HELP_REQUEST_HANDLER       =
*      I_LOWER_CASE                 =
*      I_MEMORY_ID                  =
*      I_NO_EXTENSION               = ABAP_FALSE
*      I_NO_INTERVALS               = ABAP_FALSE
*      I_AS_CHECKBOX                = ABAP_FALSE
*      I_AS_DROPDOWN                = ABAP_FALSE
*      IT_VALUE_SET                 =
*      I_READ_ONLY                  = ABAP_FALSE
*      I_DONT_CARE_VALUE            =
*      I_EXPLANATION                =
      I_TOOLTIP                    = 'Select Date'.
8: To Fetch Data entered in the selection field, write following code on action of button click:
data:
        lt_date type REF TO DATA.
FIELD-SYMBOLS:
                 <fs_date> TYPE table.
* retrieve Date from Select Options
CALL METHOD WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD
    EXPORTING
      I_ID           = '<attrib_name>'
    RECEIVING
      RT_RANGE_TABLE = lt_date.
* assign Date Field Symbol
ASSIGN lt_date->* to <fs_date>.
9: Windows Window Tab: In the View Conatiner, embed the WND_SELECTION_SCREEN view from SELECT_OPTIONS component Usage of WDR_SELECT_OPTIONS component.
Regards,
Reema.

Restrict Select-Options for Logical Database field

The way we restrict select options for custom defined select option fields on selection screen.. can we restrict select options for standard Logical Database fields?
i.e. report uses PNPCE logical database and has field called PERNR. I want to restrict select options for this PERNR field so that it has options for 'Select single values' only.
Thanks,
Falguni
Edited by: Falguni V on Nov 13, 2010 6:42 AM

You can user AT SELECTION-SCREEN event, and check whether any record is having high value for PNPPERNR.

How to assign search help using ovs for select options for ALV in web dynpr

how to assign search help using ovs for select options for ALV in web dynpro

Hi,
refer http://wiki.sdn.sap.com/wiki/display/WDABAP/InputhelpofObjectValueSelectioninWDABAP
http://www.****************/Tutorials/WebDynproABAP/OVS/page1.htm
and http://wiki.sdn.sap.com/wiki/display/Snippets/WebDynproAbap-OVSsearch+help
Thanks,
Chandra

Selection option for variable entry in BEx in 2004s

Similar Messages

Maybe you are looking for